Microsoft Life Cam

Similar Questions

• I can't open my Microsoft life Cam

  I don't know which version it's because I can't get anything to open it, but it was bought December 2010. It worked perfectly, and there is no response when I try to open it.

  Another thing, I didn't know how to answer the boxes below on the forum and comments. I just need help.

  Thank you very much

  Hello

  1. do you get an error message when you try to open Microsoft Life Cam?

  2. What is the brand and model of your computer?

  3. What is the version of Windows installed on your computer? For example, Windows 7, Windows Vista.

  4. have you done any software or hardware changes on your computer before this problem?

  I suggest you according to return information about the Microsoft Life Cam model so that we can better work on the issue. You will be able to find information on the box or packaging that came with the Microsoft life cam.

• 1080 MicroSoft Life Cam questions?

  Bought a MicroSoft Life Cam Webcam 1080

  In the middle of uploading software cd, I get an error message

  www.support.Microsoft.com/kb/953691

  I am running Windows Vista.  Have all tried to free disk space, change the Windows Installer to automatic.

  Running Windows XP at work and the upload works fine.

  Help!  Help!

  Knight Fan Stan

  Hi Knight Fan Stan

  What is you receive the exact error message?

  Method 1 :  Clean boot the computer and then try to install the webcam

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Method 2: You can see the steps outlined in the article below, which deals with a similar question

  Resolve the error "Setup cannot continue" when you install the LifeCam software

  http://support.Microsoft.com/kb/973297

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• MICROSOFT LIFE CAM MODEL 1393 fails to load at startup.

  My Microsoft Life Cam model 1393 does not work properly when booting, i.e. does not open. The only work around I have found is to unplug and re-plug the USB cable whenever I want to use it... fate of as pulling the choke on an old Chevrolet each time that you start it. Once I did the camera performs superbly in all areas, both audio and video. It works perfectly in HD with Messenger, Skype and Google. Once I disconnected and reconnected, I can turn off the unit and open it up without any problems. I am using a PC desktop configuration as follows:

  • Processor Intel Core 2 CPU * email address is removed for life private ***@2.93Ghz RAM 4 GB
  • O/s = Windows7 64-bit
  • Drivers camera = Version 3.20.240.0 = current so-called
  • Device Manager confirms that it works correctly
  • All the USB ports on the PC work. I tried at various ports
  • Uninstalled and reinstalled the unit unsuccessfully.
  • Device is not blocked by the firewall.

  Any ideas will be appreciated.  Thank you... LO

  Hello

  ·        You get any message of error associated with the cam of life every time you start the system? If Yes, what is the exact error message?

  I suggest you to uninstall the software and other programs related to Microsoft live cam and then install it on the system and check if the problem is resolved. Follow the steps mentioned below.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Then install it back again on the system by following the steps mentioned in the article and check.

  http://www.Microsoft.com/showcase/en/us/details/7f6bf11d-d9d2-4AD2-bde1-0f299804f38e

  For more information click on the link below.

  http://www.Microsoft.com/hardware/digitalcommunication/LifeCam/Readme/en-us/default.mspx

  http://www.Microsoft.com/hardware/download/download.aspx?category=ice

  Troubleshoot failures to find the new LifeCam hardware

  http://support.Microsoft.com/kb/929087

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error Microsoft Life Cam "a later version of the Webcam Live software is already installed, to reinstall the life CAM software, you must first uninstall the CAM of your computer software."

  Dear Mircosoft
  I just bought the Microsoft Live Cam VX-2000.  You are able to help.
  I followed the installation, then at the end when the picture came on the screen an error message came on the screen: "a later version of the Webcam Live software is already installed, to reinstall the Webcam Live software, you must first uninstall the software of Webcam Live from your computer."
  I'm not very user-friendly computer.
  I get a green flashing on the camera.
  I can't use it in Skype.
  Thank you
  JO Smith

  Hi josmith416342,

  ·         You have installed all software associated with the device?

  ·         Do you have any device life Cam earlier?

  Check to see if the following is useful.

  Method 1: Check list of programs for the device relating to the software. Uninstall the same and try to reinstall the software.

  How to change or remove a program in Windows XP

  Method 2: You can follow the steps in the following article and see if it helps. The error mentioned in the article is different, but this can be tried.

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

• Problems with Microsoft Life Cam

  I also have a Cam of life of Microsoft that I bought a while ago and it worked fine as much as color and to print a photo was nice. Now when I take pictures the color was terrible. I don't understand why a color was so off. I tried all I could everything to see if it would be better, but has no adjustment. The photos are real dark and look very dull, not fuzzy. I changed the dos version and still no better. I have to buy a new one? I use Windows 7. Thank you if anyone has any good advice.  Be modified for older also versions and service pack.

  Hello

  See the online documentation and drivers for your LifeCam:

  Support for Microsoft mouse, keyboards, LifeChat, LifeCam & more
  http://support.Microsoft.com/ph/7746#tab1

  WebCams - Drivers and Documentation
  http://www.Microsoft.com/hardware/en-us/downloads

  WebCam help & resources
  http://www.Microsoft.com/hardware/en-us/support/how-to

  Microsoft Hardware warranties
  http://www.Microsoft.com/hardware/warranties.mspx

  Support for WebCam
  http://www.Microsoft.com/hardware/digitalcommunication/support/default.mspx

  and:

  http://www.Microsoft.com/hardware/en-us/support

  Microsoft Hardware - contact us
  http://www.Microsoft.com/hardware/en-us/support/contact-us

  MS hardware supports and warranty claims (support for 90 days from the date of the 1st call).
  1-800-936-5700

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Problem with audio video in the Microsoft Life cam vx5000

  I have a Microsoft lifecam vx 5000, and after installing and trying out I can't with the microphone. The camera works perfectly well and the individual with no picture speech Recorder works great. However when I record avideo, it will only save sounds in the first 7 seconds. What should I do?

  Hi, Jillian

  1. How do you save the video?

  2. use any third-party program or functionality built into the web camera to record videos?

  I suggest you reinstall the software of web cam on the computer and check if it works.

  http://www.Microsoft.com/hardware/download/download.aspx?category=ice&type=LifeCam&SKU=RKA-00001

  File of Microsoft LifeCam Readme and troubleshooting information

  http://www.Microsoft.com/hardware/digitalcommunication/LifeCam/Readme/en-us/default.mspx

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to use microsoft life - cam vx - 700

  I just bought a Microsoft LifeCam VX - 700 to my laptop but don't really know how to use, there is no manual and I've never used a front video camera

  Hi scarter600,

  Please refer to the below links provided on how to install, configure and install LifeCam on your computer and check if that helps you use the LifeCam:

  http://support.Microsoft.com/GP/cp_webcams_master#TAB0

  http://www.Microsoft.com/Canada/Home/communications-and-mobility/articles/help-find-LifeCam-answers.aspx

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Download Microsoft updates caused life cam microsoft to have initialization error!

  After that microsoft download these updated my microsoft life cam won't work, received error message "initialization error". It worked fine before downloads. I tried to uninstall and re install - suggestions?

  Hello

  1. What is the model number of your webcam?

  
  When you start Microsoft LifeCam, the video preview is blank. This can only happen with a quality greater or more high resolution video or pictures.
  Follow the steps listed in the article below and check if that helps.
  Set the empty preview, "initialization error" or 'no camera not connected' error in the LifeCam software
  http://support.Microsoft.com/kb/933311

  I hope this helps.

• How to take a photo using life cam studio web cam. Model number: IMNST2164

  How to make a photo and video recording using a Microsoft life cam studio web cam?

  Hello

  What version of the operating system is installed on the computer?

  Method 1:
  You can check out the link and check.
  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/webcam/LifeCam-Setup

  Method 2:
  You can install the drivers and related software on the manufacturer's Web site.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  For more details, please consult the manual that came with the cam of the life.

• How to open life cam studio for a remote desktop?

  in my holiday home, have windows 7 pro with installed microsoft life cam. This computer is remote access enabled.

  Since my home computer, I can access my house OK computer, but cannot open my cam life.  Get a message "no camera installed.

  How can I access my life cam and the studio for my computer?

  c

  Hi seejoe,
  Take a look at the faq:
  Remote Desktop connection
  B Eddie

• What is http for drivers life Cam 1.4 (free download) on protected site

  drivers for life Cam 1.4 (free download)

  Hello

  You can read this article and check if the required driver is available for download: http://www.microsoft.com/hardware/en-us/downloads#webcam

  Thank you.

• Internet not connected during the installation of life Cam 3.0

  Original title: when I try to install my new life Cam 3.0

  He says that I am not connected to the internet and try again later. BUT I am connected and tried disabling my firewall, nothing works... Please help me, I'm windows xp2

  Hello

  1. What is the accurate and complete error message that you receive?

  You can try the troubleshooting provided in the links below steps to fix the problem.

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  http://support.Microsoft.com/kb/953691

  Troubleshoot failures to find the new LifeCam hardware

  http://support.Microsoft.com/kb/929087

• Installation manual for the cinema MS Life cam

  1. I have Windows XP with Service Pack 3 - does that answer the demands of life Cam movies?

  2. my CD player does not work - download the installation manual to read and install my webcam?

  Thank you.

  Yes.

  http://www.Microsoft.com/hardware/en-us/p/LifeCam-cinema#support

• Life Cam 1.1

  Why can I not use this camera with my Vista PC? When I try to install it tells me to see if Microsft has all the answers!

  Hi monteray,.

  You install life cam using the CD that came with it? If so, it may be that the drivers are not appropriate. Download drivers Windows Vista FRO your cam of life from the following Microsoft link: http://www.microsoft.com/hardware/download/download.aspx?category=ICE

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com