Microsoft LifeChat LX-3000 inline volume controls does not not on Windows 7

I just bought a Microsoft LifeChat LX-3000 headset, install the LifeChat 1.4 software. The headphones and the microphone are functioning normally, also the command buttons to perform a call and mute, but the buttons for the volume control do not work. I checked the HID services and they are running, also reinstalled the software and drivers but these buttons do not work.

I use Windows 7 Enterprise (64-bit) on a Dell Studio 15 laptop.
Thanks in advance for your help.

Hello

 
1. it worked before?
2 have you made any changes to the computer before the show?
Method 1:
 
I suggest you to connect to another computer and check with the question.
If the problem persists after you connect to another computer. I suggest you contact the hardware support for assistance:
 
Method 2: run the hardware troubleshooter and see if it helps.
Open the hardware and devices Troubleshooter
 

Also check out the links:
 
I hope this helps.

Tags: Windows

Similar Questions

  • My speakers stopped working suddenly. the message I get is good card can be used, but the volume control does not appear and when I go into sounds and devices, everything is gray.

    My speakers suddenly stopped working. I went to audio and I received a message sound card may be in use. The volume control does not appear atr from the bottom of the screen and when I go into properties, everything is gray.

    Hi BarbaraEvanchik,

    ·         What is the brand and model of the computer?

    ·         Did you do changes on the computer before the show?

    Follow the steps in the article.

    How to troubleshoot sound problems in Windows XP

    For reference: no sound in Windows

  • Resolve hotkeys or volume control does not not on Microsoft Multimedia Keyboard.

    Was working OK until I upgraded to the latest version of Intellipoint V8 & Type Pro 8.2. Now the works of control Volume and other keys do not work, but not both at the same time. Can switch between the work of group by restarting HID (Human Interface Service). Have tried all ID of the MS Article: 932875 but no result. I did everything right by uninstalling the old version first. Frustrating

    Hello

    Have you checked if the keyboard works fine on another computer?

    Method 1:
    You can make sure that the key to the shortcut key sequence is correct.
    a. open Control Panel > language and region.
    b. click on change keyboard settings > advanced keyboards.
    c. check the keysequence. You can also click on the sequence of modifier keys and choose the keystrokes you want.
    d. click OK and check.

    Method 2:
    Amy connect you the keyboard to a different USB port and check the behavior of the keyboard.

    Method 3:
    If the problem persists, you can check with a new user account because this can happen due to the damaged user account

    Create a user account:
    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
    Note: If the problem does not occur after you create a new user account, and then follow the steps in the following article to fix the damaged user account.
    Fix a corrupted user profile:
    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  • HP wireless keyboard from 2.4 GHz on the HP Pavilion Elite 083 Volume controls does not not in Windows 8

    I have a HP 2.4 GHz wireless keyboard on a desktop HP Pavilion Elite 083 UK:

    Model KG-08510 rev 1.1

    Product #ABU KZ256AA number

    Part number 505143-031

    .. Since the upgrade to Windows 8 Pro to Windows 7 Home Premium, I have problems with getting control of Volume +, - and disable keys on the keyboard to work reliably in Windows 8 Pro.

    In summary, the symptom is that when I start the PC from a start-up to cold which is a full power down of the State of the volume on the keyboard controls do not work.

    However, if I unplug and re - plug the USB wireless receiver that came the keyboard on the PC then on the keyboard volume controls begin to work again.

    I tried the following things to try to solve this problem:

    -Made a lot of new installation of Windows 8 i.e. reformatting the hard drive (no recovery) and fresh install Windows 8 on a blank hard drive.

    -Installation of Microsoft Windows all the updates available for the machine.

    -Manually install drivers wireless keyboard on the site of HP driver for my computer HP Pavilion Elite 083uk (this allows the screen display on to CapsLock and numlock which works reliably every time that I start).

    -Disable 'fast start up' in Windows 8 power settings

    -Using different USB ports on the back of the machine

    This question is re-producable each time and the keyboard volume buttons work fine even from boot cold when I was running Windows 7.

    I think that I have now found a solution / workaround to solve this case no matter who is interested.

    1. download and install the Microsoft "DevCon" tool that provides an interface to command line for Device Manager.

    Download and installation instructions are here:

    http://social.technet.Microsoft.com/wiki/contents/articles/182.how-to-obtain-the-current-version-of-device-console-utility-DevCon-exe.aspx

    2. create a Windows scheduled task with "highest privileges" that works on logon that issues the following command:

    DevCon restart 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

    This restarts "HID-compliant consumer control device" that is listed in my device manager which is middle for the proper functioning of the volume control and mute buttons on the keyboard (keyboard functionality is via a separate driver which is not affected).

    NB. you need to replace ""HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02"with whatever hardware ID is listed in the device for that Manager.»

    3. If the above does not work, then you must create a scheduled task to run a batch file with the following:

    DevCon disable 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

    DevCon enable 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

  • HP slate 7 volume control does not

    Volume control stopped working a few days ago.  She slips back on the screen and volume button forces to do the same.  The volume never changes.

    Hello and welcome to the HP support community!

    Have you tried to reboot the device?

    You see a headphones icon in the corner?  Try to insert and remove a headphone jack.

    Does the device he uses a Bluetooth audio device?  Turn BlueTooth off, restart the device, and then try again.

    WyreNut

  • The volume control does not work on my Tecra A9

    Hi all

    I just be reformatted my laptop and put all the drivers and have a slight problem my on the front volume control not working anymore.
    How to operate?
    Also when I go to Toshiba Assist on doctor connectivity the bluetoooth does not come to the top. How can I get this back up?

    Thanks Pob

    Hello

    Have you installed the operating system using the Toshiba Recovery disk?
    If not; do you have what OS installed?

    It is Win XP?
    If yes you must first reinstall the common Modules then the commands and utilities

  • Satellite A305-S6825: Volume control does not stop right or left

    We recently bought the Toshiba: Satellite A305-S6825 and note that the Volume on the front panel control seems to turn left and right, but does not seem to stop.

    I thought that a few twists to the right/left, he'd stop, but no.

    Everyone is the same thin experience?

    > Control volume on the façade seems to turn left and right, but does not seem to stop.

    Don t worry buddy ;) is not a fault or a bad hardware work it s a feature!

    I have the A210 and properties of volume control. I can turn right and left without stops

    Greetings

  • Volume control does not appear on the screen when I try to activate it. This has never been a problem until now. How can I get this working again?

    The volume control is located at the bottom right of my sidebar it me has not given any problems so far. Now, he just will not appear on the screen when I try to call. This has never been a problem before. I really did something to screw things up (again!) today. This is the first time I had this problem.

    Next time please indicate what opersting system you first use before describe you your problem.

    You can start by doing a system restore. Choose a date on which your Volume icon in the taskbar.
    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    If for some reason it does not restore the Volume icon, then...

    For Vista, use this tutorial:

    http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

    You can try a method first. If the Volume box is grayed out (is usually), go to method 3.

    2. for the Volume icon

    To activate the Volume - icon Enable_Volume.reg< click="" to="">
    Then, follow the instructions from #5 to #9.
    Make sure that you restart the computer to complete the process.

    For Windows 7, use this tutorial:
    http://www.SevenForums.com/tutorials/19085-system-icons-enable-disable.html

    Go directly to the Option two

    9. to activate the Volume icon

    (A) click on the download button below to download the file below.

    Enable_Volume_Notification_Icon.reg

    then follow the instructions from #11 to #15.

    Make sure that you restart the computer to complete the process.

  • Windows Media Player volume control does not work during DVD playback.

    When I play a DVD in Windows Media Player or Windows Media Center I can't adjust the volume with the volume control of the program or main Windows volume control.  Simply sound 100% flight.  It's on a HTPC connected to an A / V recevier, so the only way to adjust the sound with the volume of the receiver control.  When I play any other type of multimedia (avi, mp3, etc.) in the two WMP or WMC in the program volume control is working properly.  The interesting part is, when I play a DVD using VLC Player or Cyberlink Power DVD the volume setting in the program as well as the main Windows volume control works correctly.  This leads me to believe it's a software is not a hardware problem.  I think that WMP and WMC using the same "engine" so the same problem knocking them both.

    Other info:

    Windows 7 64-bit.

    Windows Media Player 12 version

    Audio is routed to the receiver via the digital coaxial

    For what it's worth, this same problem occurred with the same exact material when I'm running Vista 32 bit.

    All other software is the latest version with all updates installed.

    Any ideas are welcomed and appreciated.  Thank you in advance.

    -Michael P.

    Hello

    Reinstall the WMP and WMC application and see if it works very well.

    1. open the Control Panel -> programs and features.

    2. click on Windows to enable or disable features in the left pane.

    3 expand the multimedia features, disable Windows Media Player. Click Yes to continue, and then click OK to exit. Then restart.

    Note: If you turn off your WMP, Windows Media Center will be off either. You may need to reconfigure the settings for Windows Media Center after her reactivation.

    4. open or turn off Windows features turn on again. Functionality in Windows Media Player and Windows Media Center. Turn it back on.

    5. launch Windows Media Player, initialize the program.

    PS: If you turn off your WMP, Windows Media Center will be off either. This does not happen when we choose to turn off MCE.

    $C

    God will not look you over for medals, but for scars. Each winner has scars; I do this either on the same heart

  • Smartphones blackBerry "BOLD" Volume controls does not work

    Good day to all,

    I've had my "BOLD" for about a month now. When I got there, I was able to adjust the handset volume during calls or when you listen to the music by pressing the buttons of the volume control on the right side of the phone. However, the buttons just stopped one day and I can't adjust the volume in all applications. At the present time, my hands-free game is stuck at half volume, my phone calls are at full volume and music is at 75% volume. Is there a setting that uses by default the volume for each application or my buttons volume likely to be spoiled.

    Thank you for your time in reading this and hope someone can enlighten me on that.

    Hi jzachlee,

    Welcome to BlackBerry Support Community.

    If the press does reflect no change in the volume then it must be a hardware problem. As you mentioned that your unit is a month and you're still able to claim the guarantee. You would be better due to the device to change.

  • Bose and microphone volume control does not not with 3.5 mm adapter lightning

    Is it possible to do the volume control button and the microphone works with the adapter supplied with the iphone 7?

    Try to go to apple and see what they say because you might need new wireless headphones or those that fall into the adapter of the lightning.

    Hope this helped you a bit.

  • Keys on the keyboard volume control does not

    Hi, I bought hp pavilion g6-1105tx 4 days ago. Key to increase volume, decrease key and mute the button worked very well until I have updated by audio drivers from hp support assistant. they no longer work. How to solve this problem?

    Hello

    Try to download and install the latest version of the HP driver from the link below - this can be the same as that applied by HPSA, but try to reinstall it.

    FTP://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52790.exe

    Once the installation is complete, restart the laptop.

    If the above does not solve the problem, try reinstalling the buttons to quick launch the installer on the following link.

    FTP://ftp.HP.com/pub/SoftPaq/sp53001-53500/sp53135.exe

    Yet once, restart once the installation is complete.

    Kind regards

    DP - K

  • El Capitan keyboard volume control does not

    I upgraded to El Capitan, and now, while volume on the keyboard controls display the volume on the screen change, they have absolutely no effect on the actual volume. I have to manually control the volume within the application (for example, QT).

    I am running OS X El Capitan 10.11.3 on a MacBook Pro for mid-2010, and the volume control on the activity of keyboard perfectly, be it with iTunes or QuickTime Player.

  • By Satellite L300-147-manual volume control does not

    The manual on the laptop volume control no longer works. If I try to adjust the volume (on the right of the headphone plug-ins) - I just keep scrolling. So, I can only watch DVDs on a really low level. I adjusted the volume under 'control panel' control to the maximum level.

    Any ideas to fix this please?

    Never heard talk about it but it makes sense with the installation of the Package of added value.

    It's really strange question, and it will be interesting to know if this helped. Please post the results.

  • FN keys and volume control does not not on Satellite A210-131

    Hello
    I have a Satellite A210-131 for 3 days now, and the FN keys do not work. The numeric keypad using FN works fine, just the F1-12 combined with FN do nothing. I have the latest drivers and utilities from the website...

    In addition, my touch volume control works quite stupid, it takes less than 20 seconds to set and then its way too hard... I always have to go to the sound control menu to change...
    Help, please!

    Hello

    It's very strange. Usually, if you press the FN key and keep down flash cards must be indicated at the top of the screen. Please try to restart flash cards: start > all programs > TOSHIBA > utilities > restart Flash Cards.

    I don't know what the problem with the touchpad and the control volume but friends Satellite X 200 (the same tablet like on your A200) works well. Problem described is quite strange, and to be honest, I don't know.

Maybe you are looking for

  • My iPod does not start!

    I stop my iPod touch when it was slightly damp in order to preserve and place it in a Cup to allow the water to flow out. I tried to start the next day and nothing happened. I've been tubes in a river with my family and my iPod was in a cardboard box

  • How can I send outgoing messages from tbird lot not immediately

    TBird sends emails when I press the button send, this may take a few seconds while I'm waitingcan I not send in real time, but as every 10 minutes saying get incoming emails?

  • How to stop taking control in the page from popping up every time I double click on the firefox desktop icon?

    Pop - up when I double click the icon of firefox on the desktop, the home page and control of two-page fact sheet page. How to stop taking control in the page from to appear repeatedly when I double click the icon of firefox?

  • clean the surface of the t410 how?

    I want to know this as the best material to clean the surface of cleaning t410. Surface, I mean the external body of the laptop, I have some marks of fingerprints on it... and I tried to clean with a tissue and water and it did not work on... these b

  • How to hide error in or controls?

    In LabVIEW 2009, I can't hide the error in or on the Fron Panel controls. If I select one of the controls and right click, I get instead the palette function in the context menu. I know that I might be able to hide the controls by using the Visible p