Microsoft Mouse and keyboard Center recognizes not Microsoft Wireless Notebook Optical Mouse 3000 says no device detected
Original title: Microsoft Mouse and keyboard Center does not recognize my Microsoft Wireless Notebook Optical Mouse 3000'
My Microsoft Wireless Notebook Optical Mouse 3000 works fine but when I click on it in the devices section and printers on Panel, Microsoft Mouse and keyboard Center does not recognize. It displays the text "No Device detected". Here is a screenshot of what I see:
Hi faignard,
Thanks for the reply. It is regrettable that uninstall the existing mouse device manager drivers did not help to solve the problem.
I suggest that you go to the program and features under programs installed and check if there are any associated with IntelliPoint software or any software application related to the mouse installed. In the affirmative, please go ahead and uninstall them and then try to install the driver software IntelliPoint 8.2 in compatibility mode as stated in my previous post dated 22 December 2014. See the following link on how to uninstall program:
http://Windows.Microsoft.com/en-us/Windows-8/uninstall-change-program
Please answer us on the State of the question to help you further.
Tags: Windows
Similar Questions
-
Microsoft Wireless Notebook Optical Mouse 3000 does not illuminate.
I 1 Microsoft Wireless Notebook Optical Mouse 3000 mouse model, but now the mouse still works fine but the transceiver with to connect does not! When I flug in there in my computer the light say not keen to see it was connected, so the mouse can does not, can someone get this problem? Sorry for my English!
hzonmd,
Thank you for visiting the Microsoft Answers community forum.Here is an article that has several for your wireless mouse troubleshooting steps and should help you to solve this problem:
The Microsoft wireless keyboard or mouse does not work as expected or respond intermittently
http://support.Microsoft.com/kb/838398Please try these steps and let us know if you need additional assistance.
Thank you
Gloria
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Mouse and keyboard Center does not detect MS Trackball Optical
When I plugged a Microsoft Trackball Optical on my laptop running Windows 7 Ultimate, it automatically downloaded and installed Microsoft Mouse and Keyboard Center - who said no. Device detected detected.
Awesome! A Microsoft program that cannot detect automatically detected Microsoft device that is on the list of devices supported. So amazing that I could just cry, laugh or both.
Strange thing however, on my desktop PC, also under Win 7 Ultimate, there nothing done except that work when I plugged an identical MS Trackball Optical.
Hi GreggEshelman,
I suggest to install the keyboard and mouse last Center from the following link and check if it helps.
Mouse and keyboard Center 2.2 (formerly IntelliPoint IntelliType Pro)
http://www.Microsoft.com/en-in/Download/details.aspx?ID=39098
You can also refer to similar: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/microsoft-trackball-optical-not-recognized-by/e0a2d4d2-243f-4adb-8596-6f2318f7d09a
Let us know the status of the issue. If you need help, please after return. We will be happy to help you.
-
Microsoft Wireless Notebook Optical Mouse 4000 does not
I got an MS 4000 optical mouse for about a year now, and just recently it stopped working. I noticed that the red light on the bottom of the mouse was not lit, so I bought new batteries and a properly installed and still nothing. My mouse is dead or there is something else I can do to reset?
Hello
These should help:
Troubleshoot a wireless mouse that does not correctly
http://support.Microsoft.com/kb/321122Many of the mice have a 3-year warranty.
Microsoft Hardware USA
http://www.Microsoft.com/hardware/mouseandkeyboard/ProductList.aspx?type=mouse&techId=WirelessTechnologyMicrosoft support - mouse and keyboard - USA
http://www.Microsoft.com/hardware/mouseandkeyboard/support/default.mspxMicrosoft Hardware warranties
http://www.Microsoft.com/hardware/warranties.mspxMicrosoft Hardware Canada
http://www.Microsoft.com/Canada/hardware/mouseandkeyboard/default.mspxMicrosoft support - keyboard and mouse - Canada
http://www.Microsoft.com/Canada/hardware/mouseandkeyboard/ProductList.aspx?type=mouseThese mice are delivered with 90 tech support of day of the 1st incident that was about to begin when
contact Microsoft at the number below.Hardware support of MS and warranty claims
Tech Support 1-800-936-5700 for MS material or call: 1-800-Microsoft (642-7676)I hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
I use Microsoft Mouse and keyboard Center for years with no problems. For example, version 2.2.173.0 worked well. I use Windows 7 Professional 64 bit.
I swapped the buttons on my Comfort Optical Mouse 3000 (so that the right button's "click" and the left button displays a context menu, for example). When I connect to a remote computer, traded buttons continue to operate as programmed.
Just set Windows Update to update my mouse and keyboard Center to the 2.3.188.0 version. Now when I use the Windows Remote Desktop to connect to another computer that is running Windows 7 Professional 64 bit, my button is not honored. In other words, on the local computer, the right button of the mouse is 'click '. On the remote computer, the left mouse button is 'click '. The keys are reversed on the local computer, as I have it configured, but not on the remote computer.
I called Microsoft and was transferred to various departments. I would like to report this bug, although I have to pay out of pocket, but there seems to be no way to report this bug.
Is there a way to report this bug to Microsoft? Is there a solution? How can I revert to a previous version of Microsoft Mouse and keyboard Center?
I suggest to perform a restore of the system to a restore point before the update.
You can also uninstall the keyboard and the mouse Center programs and features.
Then, go to this site and download the previous version.
(I couldn't find any previous version on Microsoft sites, but I checked the file hash values, I downloaded Microsoft previously).
MD5: 4a2fb26c01d96b25487735da2925f89a
SHA1: a68199c29a840dc8719c7f644ae14a4b138f65e7
-
Export or save the settings Microsoft Mouse and keyboard Center
Hello
I use the MMKC on Win7 and I intend to upgrade to Win10.
Rather than migrate to 10 keeping the existing mess, I would like to get a new installation by reinstalling and then 7 to 10.
I don't see an option to export the settings in MMKC? I found the folder Documents\Microsoft Hardware\Macros
containing macros MHM but not the reallocation of the shortcut key.
Do I have to export the registry settings or y at - it an easier way? Thank you.
Devin
Hey Devin,
According to the description of the problem, you are ready to export the Microsoft Mouse settings and keyboard Center. I suggest you to return the article mentioned below and see if it helps you to solve the problem.
How to share and import macros?
Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.
Kind regards
-
Can't install/uninstall Microsoft mouse and keyboard Center!
Hi, I got problem with the Microsoft Mouse and keyboard Centre because he doesn't identify my touch mouse correctly (classified as a HID-compliant device and not by its name as my Sidewinder X 4 keyboard). I uninstalled from Add/Remove Programs, and I also uninstalled the drivers for my mouse AND my keyboard (because it showed a double receiver device in device manager). I restarted my computer, but when I tried to install the drivers again in the process of installing mouse and keyboard I got an error message telling me that it was already installed. I uninstalled it again (the "ghost" of it is still listed in Add/Remove Programs) and restarted. When I tried to reinstall, I got the message again who told me that it was already installed. This is when strange things began to happen. The program was once again listed in Add/Remove Programs (this time with its icon and not only a "ghost"). I tried uninstalling and received a message telling me that the uninstall process could not be met because some the original installation files have been corrupted or missing. But now, the program has been listed in the Windows Start menu and when I double click it it started an installation process ceased to immediately resume a message that mkc.msi was missing from a temporary file to My Documents, and he could not proceed, so now I can't install or uninstall the cursed thing. I tried to restore my computer but it doesn't solve all problems. I suspect that some registry entries are not deleted properly when the first uninstall process. I don't want to mess with the registry by myself, at least not until I know what registry entries are created by and in connection with the program. Any help would be appreciated.
Thanks in advance
Hello spmisik,
Thank you for the question!
I'm sorry to know that have problems you with Microsoft Center of mouse and keyboard. As I understand well you can't install/uninstall Microsoft Mouse and keyboard Center.
I need to ask you some questions to help you best.
1. the problem persists with a particular application?
2. were there any changes (hardware or software) to the computer before the show?
Run the fixit and check.
Solve problems with programs that cannot be installed or uninstalled
Answer to us if you are having problems with Microsoft Mouse and keyboard Center or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.
Good day!
Hope this information helps.
-
The link to support Microsoft Mouse and keyboard Center appears broken
I downloaded the last Microsoft Mouse and keyboard Center (version 2.7.133.0 on Windows 7 64 bit). [This now supports Excel with the ergonomic mouse Sculpt, thanks!] I noticed that there is a support link that is supposed to take you to the "Microsoft Hardware Support Page.
When I selected, it opens http://go.microsoft.com/fwlink/?LinkID=259866 which seems to be a broken link. Is anyone else seeing this?
BTW, it should really be a more easy/obvious way to report this bug, but I couldn't find a (another using telephone support, I guess, but that seems silly). Perhaps it is the location of the broken link? :-)
Hello
Thanks for the update on the issue.
This seems to be a problem of compatibility on the Internet Explorer 11, sometimes this can be corrected by adding the site to your list of compatibility view.
Difficulty of the problems to view site with compatibility view
http://Windows.Microsoft.com/en-us/Internet-Explorer/use-compatibility-view#IE=ie-11
Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.
_______________
Thank you best regards &,.
Isha Soni
-
How to remove Microsoft Mouse and keyboard Center?
Hello, I look at a log of the events, and I noticed that there was some sort of error with the keyboard. Recommended action was to remove the driver and reinstall. So that's what I did. I have a Microsoft Comfort Curve keyboard 2000. Once I deleted the driver, then I tried to reinstall the driver which is bundled in a package called Microsoft Mouse and keyboard Center. After downloading and extracting, invites a mistake: "this version of the software is already installed on this system. To re - install this software, you must remove it all first, and then rerun Setup from the installation media. For more information about removing a program, see Windows Help. "So, naturally, the first thing I did was look for an uninstall. Hmm, nothing to add or remove programs, there is nothing in the folder of the Start Menu. So the only other thing I could think to do was to delete the files in the C:\ directory, I did. But still, after trying to reinstall this driver, I get this same error. Will you please tell me how to remove this software from my computer, so I can reinstall it, so that I can use the good driver for my keyboard instead of ' HID Keyboard Device. Thank you.
Hi, I thought about it. Or, at least, I understood how to uninstall. It turns out that Microsoft Mouse and keyboard Center is in Add or remove programs, you just need to search to find it. And I uninstalled. So, I'll just reinstall and go from there.
-
I did a new install of Windows 8 on my Dell desktop computer that has a keyboard, Microsoft Natural 4000 and Dell's USB mouse. Windows 8 Microsoft keyboard recognized and automatically downloaded and installed Microsoft Mouse and keyboard Center version 2.0.162.0. However, I'm a lefty mouser and installation of the MS mouse & keyboard Center back on my right handed mouse buttons. (I went to control panel |) Mouse and swapped buttons immediately after installation.) When I went into the control panel. Applet of the mouse and the keyboard and mouse Center had resumed the first tab of the control panel mouse properties, stating "click here to change the settings for the Microsoft mouse. This is the tab where the "Swap mouse buttons" is usually. When the mouse and keyboard Center is launched, it offers only options for the keyboard. Do I have to abandon my Microsoft keyboard or purchase functions go a Microsoft mouse to get exchanged my mouse buttons?
How to swap the mouse buttons on my non-Microsoft with Microsoft Mouse and keyboard Manager installed mouse?
Thank you
C.C.
To get all the benefits of Mrs Maes & Bishop, you can buy a MS mouse is compatilble with the Manager, MS software is for devices of Ms and it is unlikely that MS will change their software to accommodate mice made by other sources.
If you want to keep the Dell mouse, you will need to disable MS M & K Bishop.
-
Mouse and keyboard Center shows only the keyboard settings
I have Win7 64 bit and a Microsoft Intellimouse Optical USB. In the last update of IE, the Microsoft Mouse and keyboard Center shows that the keyboard for the configuration of the pushbuttons - MOUSE WITHOUT! When opening the mouse configuration directly in the Panel... only keyboard commands show! The mouse is a 4 button and is reduced to 2 buttons now. I have re-installed the mouse without result. Help!
Hi Larimar,
I see that you have some problems with the Microsoft keyboard and mouse after an update. I'll help you with this problem.
1. What is the brand and model of the computer?
2. What is the model number of the Microsoft key and mouse Panel?
3. what security software is installed on the computer?
4. that update was installed recently?
Method 1.
Run the troubleshooter of material and check.
Follow the link given to open the Hardware Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter
Method 2.
If you know what update has been installed recently, then you can uninstall or delete this particular update and check.
Remove an update: http://windows.microsoft.com/en-US/windows7/Remove-an-update
Method 3.
System Restore: http://windows.microsoft.com/en-us/windows7/products/features/system-restore
Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.
Method 4.
You can update drivers and then try to install the update.
Update a hardware driver that is not working properly: http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly
Additional information.
Support for Microsoft mouse, keyboards, LifeChat, LifeCam & more: http://support.microsoft.com/ph/7746#tab1
Let us know if you need assistance with any windows problem. We will be happy to help you.
-
Mouse behaves badly after the update MS Mouse and keyboard Center
I use a model wireless MS Mouse 4000 and MS Mouse and keyboard Center 2.1.177.0 worm installed. Since this update the scrolling behavior does not work correctly. In a particular program (a simulation game), scrolling works much too fast. If I go into the centre of keyboard and mouse and adjust the scrolling speed, it works well. But when I restart the previous settings seem to be lost, so I have to put once again. I use Win 7-64 bit. The mouse worked fine before the 2.1.177.0 version. Any suggestions? TIA
PS I vaguely recall a default update but can find no trace of that. Running MS Mouse and keyboard Center seems normal. There is no obvious command 'save settings', so I guess it does it automatically.PaulHi Paul,.
Thanks for posting your question on the Forums of community of Microsoft.
Check out the link and follow the steps in the article:
Troubleshoot the incidents of the response to the mouse or wireless keyboard
http://support.Microsoft.com/kb/838398#appliesTo
See also:
Mouse, touchpad and keyboard with Windows problems
Check out the link and check the number of the update has failed.
See the Windows updates are installed
http://Windows.Microsoft.com/is-is/Windows7/see-which-Windows-updates-are-installed
If you are able to get the number of the update failed, try to install the updates manually.
Reference:
http://www.Microsoft.com/en-us/download/default.aspxHope this solves the problem.
-
Problem with wireless - Vista Network and Sharing Center does not recognize my connection!
I use the Home Visa software and my network and sharing Center does not recognize my connection but I can access the internet without any problem. Previously, I was using a wireless router Linksys with an old box of AT & T internet with no problems. The problems started after I updated my AT & T internet box that made obsolete the linksys router and now the network share does not connect. I just have the problem of getting the network and sharing device recognizing that I am actually connected to a wireless network. I can't use my printer or share files with other people. I can't get my wireless printer to work if I restart my computer and I have the documents I want printed already sent to the printer. My network and sharing Center also works very well for a few seconds when I start my computer then it turns off again.
Hello
Method 1:
Windows wireless and wired network connection problems
Method 2:
You can also view the related items for more information.
The problems of Internet connectionhttp://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
Network connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
Solve problems, find wireless networks
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
Method 3:
Setting up a wireless network
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network
Wireless network card: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions
See also:
Connect to a network with Windows Vista wireless
-
Bluetooth Arc touch mouse without being detected by the "mouse and keyboard Center."
The mouse is paired with your PC via bluetooth and works very well. (Please re-read that last sentence before you send information on how to pair.)
However, when I open the Microsoft Mouse and keyboard Center, it says "no device detected". For example, I can't change the settings of the mouse. There are the most annoying rattling noise that I would turn off.
Have uninstalled Microsoft Mouse and keyboard Center, reinstalled latest version. IM using windows 7.
Hello Frazer,
We want to get this support, please follow the steps on how to solve Microsoft Mouse and keyboard issues:
1. run the hardware store in Windows 7.
2 steps on how to install the driver in compatibility mode:
a. do the driver installation file right click and select properties and then tap or click on the Compatibility tab.
b. check run this program in compatibility mode.c. press or click the menu drop down and select a previous operating system, and then tap or click OK.
d. try to install the driver and verify.Let us know how it goes.
Kind regards
-
Use Microsoft Wireless Notebook Laser Mouse 7000. Horizontal scrolling does not work
Original title: mouse scrolloing problem
I just bought a Microsoft Wireless Notebook Laser Mouse 7000 and my scrolling does not work, is their a way to implement or to solve this problem?
Hello
1. the problem occurs on a particular application?
I wish that you follow all the methods in this article to resolve the problem.The problems with the mouse button or scroll the parameters
http://support.Microsoft.com/kb/303091
Maybe you are looking for
-
NEITHER 6229 let me power Signal in NOR 2503
Hi everyone, I'm feeding a train of pulse (Signal of PFI P2.0) my NI 6229 map to my card to MUX NI 2503. I pass the MUX of topology Quad 6 x 1 2 son. My pulse PFI train signal goes to COM1 + and I am firm MUX_CH6 + to use for external signals. Thi
-
How to use words with friends on the hp touchpad. Instructions?
-
Recently a support ACER technician kindly accompanied me the steps to uninstall the service in standard VGA graphics adapter before driver software he knew that I don't have an internet connection to download the ACER software (for an external monito
-
Hello I need to see a few products (SAN disks for example EqualLogic PS6010S3) But on the DELL site, I am propmte to create an account and to do this, you must be customer or partner and and... How can I find this information on some discs: MBPS MIOP
-
Cannot open attachments in Windows Live Mail on Windows 7
I bought a new Windows 7 machine, a few days ago (July 12, 2013). I installed Windows Live Mail and uploaded (with limited success at best) messages from Outlook Express in WL. I uninstalled McAfee and installed and activated Norton. Then I starte