Microsoft Natural ergonomic 4000 keyboard don't work via KVM / port replicator

Similar Questions

• the keyboard keyboard microsoft natural ergonomic 4000 answers sometimes

  Hi I have a problem with my keyboard, microsoft natural ergonomic 4000 USB, the beginning of the problem when I install windows 8, so I couldn't take Windows 8, so I decide to remove the copy and re - install my original copy of windows 7 ultimate 32 Bit. The problem is with the letter m n, these 3 letters sometimes that they work perfectly and sometimes they stop for a few minutes. I format the computer, delete the partition and installing new windows, but the problem still exist, I updated my drivers and installed the last itype, but the problem remains the same, I disassembled the keyboard and clean it up, I check the key looks all perfect, but still facing the same problem, now its works perfectly, but after he can stop. For sure the best way is to throw it away and buy a new one, but what a cost of $ 150 and I'm not going to throw anywhere. Please I need a solution thanks.

  Formatting
  updated drivers
  software update
  I've tried different usb
  I tried the former Council of keyboard using a mixer or something like that
  I have to disassemble the keyboard and clean it very good
  Always the same.

  Hello

  I suggest you refer to these links to contact Microsoft Hardware support team for assistance with the question.

  Natural Ergonomic Keyboard 4000

  http://www.Microsoft.com/hardware/en-us/d/natural-ergonomic-keyboard-4000

  How to contact Microsoft if you have questions about your hardware device.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Hope the information is useful.

• Natural ergonomic 4000 keyboard worn

  I have 2 of them, both purchased at Staples last year.  No, I don't have the Bill.  We're still new in the box.  My wife used his for several months.  The keys are dispelled.  I read here and all over the internet, it's very common.  Apparently, Microsoft's answer to this is to 'buy stickers to put on the buttons '.   This is a totally unacceptable solution.  I am currently using a Microsoft Natural MultiMedia Keyboard, which is light gray or white with black letters on the keys.  I used it everyday for years, and there is no wear at all on the keys.  New keyboards are black with white lettering.  They are the model number 1048, manufactured in China.  Serial numbers:
  7687603673143 and
  7687603378803
  Because it is clearly a quality production editing, specifically the choice of the ink used, Microsoft going to do to fix this?  Although one of them is still new in the box, my wife wants connect me it for her because she is worn out.  Clearly he too will have been key in a few months, and then I'll have two keyboards bad, news and a former, which seems fine.  Also, I bought the original Microsoft Natural Keyboard when they came first for years.  It's on a shelf in the basement.  No wear on its buttons or the other.  I replaced it only because the most recent have a smaller footprint, and the plastic had yellowed.
  Thank you.

  Hello

  I would say contact Microsoft hardware support team. Consult the following link:

  http://www.Microsoft.com/hardware/en-in/support/contact-us

  For more information:

  http://www.Microsoft.com/hardware/en-in/reseller

  It will be useful.

• Questions of Microsoft Natural ergonomic 4000

  When I use excel 2007 and try to edit a cell with works by F2 function does ' t, I'm trying to configure, change or disable the default function on the keyboard but I can't use this feature correctly in excel. all suggest? I have change the keyboard of my old keyboard comercial and I Don t I have this problem.  I bought the keyboard natural Microsoft 4000 ergonomic for comfort, but I need to use the excel program.
  Concerning
  jaumesanz

  Have you tried lock key for the purpose of the function keys?

• keys not working on Microsoft Natural ergonomic keyboard 4000 v1.0

  Suddenly, sixteen key doesn't work on my keyboard (Microsoft Natural ergonomic keyboard 4000 v1.0). No mechanical rigidity without bumps or moisture & maintain clean and dusted. It happened during a long session of Mozilla Firefox, type in the search bar. Same thing happened a few days ago still type in the search bar, but he corrected himself. Tried disconnect & reconnect the keyboard (USB), restart the computer, etc.. Using Windows 7 64 bit OS. To the help of OSK to write. Non-functioning of the buttons are "1 2 3 4 5 6 - = Backspace j k l; / Anyone got any ideas, or it's time to get rid of my favorite ergonomic keyboard?

  Using the keyboard to the screen until what the colon and semicolon keys can be restored. Following this stream.

• Mistypes keyboard: Microsoft Natural Ergonomic Desktop 7000

  Microsoft Natural Ergonomic Desktop 7000 bought on Amazon.com, made on 11 April.
  Hello
  I use Windows 7 Enterprise Edition on a Dell laptop. I recently bought a "Microsoft Natural Ergonomic Desktop 7000" from a dealer online. When I used it first, it worked perfectly.
  I had some problems with the software on my computer that I did research and corrected. After that the keyboard worked perfectly, but to halfway through the next morning it started to be very weird. For example, the key 'a' type 'gy '. This leads me to believe that the key mapping does not work somehow. The keyboard of the laptop works fine, and a USB keyboard that I have works correctly with this laptop. In addition, the mouse that came with the wireless keyboard continues to operate correctly. I tried on another computer. After downloading the software, I had the same result as on my computer.
  In Microsoft Keyboard diagnostics, when I quand je tape type 'a' it slap 'gy' and said:
  Legend: G (do) - 0 x 22
  Key: (Do) - 0 x 15
  Legend: G (break) - 0 x 22
  Key: Y (break) - 0 x 15
  Unknown key - HID Input
  Unknown key - HID Input
  STOP SCROLL: OFF
  CAP LOCK: OFF
  NUMLOCK: WE
  F LOCK: UNKNOWN
  This makes me wonder if the language of the keyboard has been changed somehow a language which has the double-byte characters.
  I have uninstalled/reinstalled drivers keyboard, cleaned the registry, compared the keys to register Keyboard Layout against another computer, removed the device in the Device Manager etc etc, without success.
  Can you help me?
  Cindy

  Hi Cindy,.

  Because the keyboard does not work with any computer, it seems that this is a unwanted material. I suggest you to contact the assistance material support team. They should be able to help you.

  See the link.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

• receiver broken on Microsoft Natural Ergonomic Desktop 7000 - Wireless 2.4 Ghz Laser mouse

  I have a Microsoft Natural Ergonomic Desktop 7000 - 2.4 Ghz Wireless Laser mouse but I broke the USB receiver.  It was broken in two and certainly does not work yet.  Is there a way to replace the receiver without having to buy a new set?

  Hello

  See the following article for information.

  How to replace Microsoft software or hardware, order service packs and replace product manuals: http://support.microsoft.com/kb/326246

  Concerning

• Function keys not working not not in Microsoft "Natural Ergonomic Keyboard 4000. -SOLVED

  RESOLVED: the choice KVM does NOT relay commands. [Yes, I spoke with the KVM hardware manufacturing] - if someone does know of a KVM FACT support Pass-thru orders?

  Original title: F keys intellitype keyboard does not not on XP.

  We have several Microsoft installed "Natural Ergonomic Keyboard 4000" and discovered one day we are experiencing problems with the function keys.  In our software provider, we are supposed to use SHIFT + F11 to access a specific function.  However this keyboard shortcut does not work.

  I installed the latest drivers of "http://www.microsoft.com/hardware/en-us/d/natural-ergonomic-keyboard-4000" for Windows XP (32-bit) and Windows 7 (64-bit) and installed on the right machines.  Yet this problem persists and I can't find a way to deliver a new command outside provider software to test if it of a hardware problem of keyboard or not.

  Any suggestions?

  BTW, the seller says "contact Microsoft", SOP answer because "it is not our fault for your choice in hardware.

  The application is developed for Windows XP and later versions, each system is at least a dual core Athlon + 4gigs of memory, with the latest OS updates.

  Thank you
  Will be

  Did you do the "F-Lock" is on? -Side of the Print button.

• keyboard freezes natural ergonomic 4000

  Regularly my whole keyboard will not work. When this happens, unplug and re - plug will not solve issue.  After that I restart my computer, the keyboard works again.

  Hello

   
  I suggest you perform the steps:
   
  Method 1:
  Step 1: safe mode

  Start your computer in safe mode and check the number.

  To start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   
  
   
  Step 2: clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

   
  Method 2:
   
   
  You can uninstall the drivers from Device Manager and reinstall the same thing again.

  1. click on Start, type Device Manager in the start search box and press enter.

  2 look for the device for which you need to uninstall the driver.
  3 right-click and select Uninstall and follow the on-screen instructions.
  4. restart the computer, if prompted.

  Install the latest driver again and check if that makes things better.

  See the links below for more details on the update of drivers:
   
  
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links
  Let us know the results.
   
   

• I have a Standard 101/102 - Key or Microsoft Natural ps/2 keyboard - the digital section has stopped working

  Hello

  The digital Panel on the right side of the keyboard have stopped working, (the square Panel containing the num lock key).
  The keys work on other computers.
  It says that the driver is working correctly.
  I tried to update the driver, and he said that I have the most up to date.

  I guess it's just the settings or configuration isse, but I don't know where or how to solve this problem.

  I'm totally NOT computer so please answer as if talking to a child of 3 years.

  Thanks a lot for your help

  Caroline

  Have you tried pressing the NumLock key to activate the numeric keypad? Owner, Boulder computer Maven
  Most Microsoft Valuable Professional

• Microsoft Natural Ergonomic - keys does not not in MS Applications

  I Erg Keyboard 4000, v1.0. During the upgrade to Windows 8:

  1 tab no longer works in any application. (It is the tab key itself, not Alt + Tab, WinSplat + Tab, etc. There is no error; It's just nothing.
  2. Similarly, the tab in a table used to advance to the next cell, or if, in the last cell, add a new line. Now, it does nothing.

  3. the Caps Lock key does not work in any application.

  4 alt - Tab, Ctrl + Tab, Shift + Tab to not work in any context in any product Office, at least as much Office365 is concerned.

  It's extremely frustrating. I uninstalled and reinstalled; restarted; cold start; pilots; files system activated with SFC, without result; any other suggestions?

  Hey Loren,

  -Have you verified the functionality of the keyboard on different computers with Windows 8?

  I suggest you install the latest version of the software for the mouse and check if it helps.

  http://www.Microsoft.com/hardware/en-in/p/natural-ergonomic-keyboard-4000#support

  You can also check with the hardware support and check.

  How to contact Microsoft if you have questions about your hardware device.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Let us know the results. We will be happy to help you further.

• Keys on my keyboard don't work

  Some of the keys on my laptop don't work. I did the apple hardware test and could not find anything wrong with it. I have followed the http://support.apple.com/kb/TS1381page and there was no change. I removed some of the keys and cleaned, still no change. However, the keyboard Viewer works. Not sure what to do, please help. Keys that don't work are: '9', 'o', 'l', '. ', up and down.

  MacBook Pro, Mac OS X 10.11.3

  Hello!

  I did the last update for 10.11.4 last night and I have a MacBook Pro (retina, 13 inches, end of 2013), but I have similar problems, except that I got two letters instead of one for example: e is ew, s = ds & d = ds, 2 = 23 3 = 23, c = cx x = cx very frustrating! Also nothing has fixed this for me or the other!

• I'm about to buy the Microsoft Natural Ergonomic Desktop 7000. There are two model numbers?

  Hello.

  Ive used the natural Ergo 4000 for a while now.  But now that I have a new office, I would like to get the wireless model.  I looked around and I see a WTA-00001 and version 4TQ-00001.
  Anyone know the difference between the two?
  Thank you very much in advance.
  Khameleon808

  Hello

  Some web, research suggests that the 4TQ-00001 is black and the WTA-00001 is grey/silver in color, but you must check these results yourself.

  http://www.bing.com/search?q=WTA-00001

  http://www.bing.com/search?q=4TQ-00001

  Don

• Satellite R15-829: keyboard & mouse will not work on advanced port replicator 3

  Hello

  I have the following problem:
  I have a portable Satellite R15 829 Tablet. I went and bought a Toshiba Advanced port replicator (PA3474U-1PRP) 3 second hand. When I plug in a keyboard and a mouse for it, they won't work. However, when I have the laptop dock and power, of the function on the external keyboard blink.

  I had a load of a keyboard and a USB mouse, and they work, so it would be a kind of compatiability issue?

  So I know that there are be able to enter them. Could be a driver problem type? Or something else? If anyone has any suggestions, I would be very grateful.

  Thank you.

  Post edited by: mur_cott

  Hello

  This device is not known to me but please check if Toshiba Mobile Extensions 3 installed on your laptop. See also the version
  Check if the latest version of the BIOS is also installed on your laptop.
  If this isn't the case, then try updating the BIOS.

• Portege R500: external monitor does not work with the Port Replicator Port 2 and DVI

  I have a Portege R500 running Vista with a slim Port Replicator II and digital monitor Viewsonic.
  I connected the monitor to the DVI port on the port replicator and got it to work OK.
  Press fn + F5 would switch between the computer screen and the external monitor.

  Then it stopped working, and I can't make it work at all. F5 recognizes just the laptop screen.

  If I connect an analog display, it is fine, and I can pass between the two screens without difficulty.

  The strangest thing is that, if I reboot when the Portege R500 is docked, the digital monitor begins by displaying the boot sequence, but then the signal is lost as soon as the screen stops the display of the progress (in low resolution) bar.

  I spent an hour on the phone to support Friday, and he made me nowhere.
  They finished by saying that he should never have worked! So what is the DVI port because then?

  Any ideas?

  David

  Connect your monitor directly to your laptop and see if it is recognized and you can go through FN + F5 between the two views.
  If it works, then connect with port replicator, and then try again.

  It's probably best if you reinstall display drivers. Maybe there are new too on the download page.