Microsoft Natural Wireless Laser Mouse 7000

Similar Questions

• DELL INSPIRON 2320 - Natural Wireless Laser Keyboard 7000 - default value is | Caps lock | WE (turned on) in all fields of password

  Hi y ' All

  DELL INSPIRON 2320 - Natural Wireless Laser Keyboard 7000 - default is Caps Lock ON (active) only when the cursor is in a field of password.

  The game of keyboard mouse 7000 is great.

  However, when the cursor is in any field/bos where a password must came me in, CapLock default value (setting) is ON or activated.

  • This only happens only in a field/area requiring a password to enter... but it happens each unique time, any application or what connection Web site password field I can be located anywhere on the Internet.
  • Again, this is only a problem when the cursor is in a password field.
  • This (setting) can be reversed that, when the cursor is in an area of password, default (setting) will be | Caps Lock |  STOP =?

  In the BIOS settings, I only find a selection of NumLock setting.  In Centre of keyboard and Microsoft mouse, the only setting that I can locate offers the choice to enable or disable the use of the Caps Lock key... entirely.  So, when turned on, the default value is lock shift = WE only in a password box.  Know, I is not no accidentally redundant; I repeat this case specific to the question in order to stress that this is the only time only this question.

  Like most people, I have to enter the password often. This problem occurs if the "remember me" or "keep me logged in" is selected.

  It's much more irritating.

  Thank you for your considerations and possible solutions, if any.

  Bobby

  1. Dell Inspiron 2320
  2. Windows Pro V.7.0
  3. Microsoft Natural Wireless Laser Mouse 7000

  #      #      #

  end of post

  Hello

  To turn off the caps from the BIOS lock, you will need to contact the manufacturer of the BIOS.

  Note: Update of the BIOS can be a complicated process, and if an error occurs, your computer could be rendered unusable. Be sure to observe the instructions of the manufacturer.

  Reference:

  http://support.Microsoft.com/kb/894037?WA=wsignin1.0

  It will be useful.

• Compatibility of the 'wireless laser mouse 7000' with 'wireless laser mouse 6000 receiver.

  Hello

  One of my colleagues gave me his extra Wireless Laser Mouse 7000, but he gave me a Wireless Laser Mouse 6000 receiver. will be the mouse 7000 and 6000 receiver work? are they compatible?

  help someone?

  Hello

  Yes those should work - just install the software (Intellipoint) and configure the mouse than the 7000.

  IntelliPoint - free
  http://www.Microsoft.com/hardware/download/download.aspx?category=MK

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Problem loading Wireless Laser Mouse 7000

  I just bought 2 7000 wireless laser mouse. I can't get either one to load. I reinstalled the battery several times, moved to different outlets and nothing. It keeps blinking red.

  Can someone tell me what I am doing wrong?
  Thank you

  I have the same type of mouse exactly, same problem and paper trick didn't work either, but I thought about it! All you need to do to fix is make sure you cut the mouse before you put in the cradle. After the paper failed, I turned off the switch on the bottom of the mouse and is only charged perfectly no problems until now! I hope that's all I had to do to fix it!

• Microsoft Bluetooth Wireless Laser Mouse works, extremely, annoyingly slow after change of motherboard out sometimes.

  I have problems with my motherboards.  I installed originally a jury of six core AMD Asus but discovered that the sound circuit on the Board picked up the RF of six hearts.  So I changed it to a Biostar TA890FXE an AM3 Board with 4 PCIE slots.

  This map may contain 4 Pcie, but has only 2 16 x slots that are white in color for Crossfire.  The other 2 Pcie are for the slower cards.  I have my card installed in slot 1 PCIe 16 x

  Since I was a boxed version of Vista Ultimate 64 bit the replacement of the Board of Directors has gone well with without a hitch, except for this problem.  The darn wireless mouse keeps presenting a significant delay from time to time.

  I upgraded to the latest BIOS and also found that a USB Joystick was also causing problems until I uninstalled the ATI Radeon drivers several times.  I have uninstalled/reinstalled all drivers USB again and again.   I even upgraded from 8 GB to 16 GB of ram Corsair and the thing does not run any faster (except for loading video in an editor) than my Asus M4785M with 4 GB ram.

  At first, I figured the card Radeon 4650 diamond with 1 GB of ram, when I ran FSX I got frequent black screens between refreshes.   When the aircraft was in its window the mouse lag so I moved it into the box with the graphics.  I could move it very quickly from time to time but not always.  As soon as the mouse has crossed the border of the FSX menu in the aircraft selection menu, the LAG would begin.

  Strange however, I also have the Microsoft Bluetooth Entertainment 7000 keyboard and it has a built-in mouse pad.  So when I got the offset of the wireless mouse I found that the mouse pad, keyboard do not show it.  Of course, a lot of batteries have been tried.  I have also a key 3G modem and the thought that maybe the RF frequencies could interfere with the bluetooth transmitter, and yet the mouse KEYBOARD pad worked fine all the time!

  At a point of the USB ports on the front of my PC failed suddenly and I used the port in the back instead, as the 3 g modem suddenly was cut.  He started upward once again connected to the rear port, but he chose all of a sudden another 3G network, spend roaming, something that isn't supposed to

  occur.

  So it seems to be a USB problem.  I double checked the connectors on the front panel plugged into the motherboard header, but it was close.  I removed it and he exchanged with a rear slot spare USB cable I have no problems. I even swapped the transmitter Bluetooth of the rear USB ports in the front and vice versa, and these problems went away.

  Yet from time to time, there will be a sound of loading the disk heads and there will be a lag on the mouse and it flit on the screen itself.  I removed all the USB drivers and mouse drivers and drivers of keyboard without result, I then plugged a wired keyboard and mouse while the USB was plugged in and waited.  The wired keyboard had built in the trackball, so I couldn't move around as fast as Bluetooth, one mouse cursor and again, I got the mouse slows down from time to time.   Most of the time is when a noise was heard from the hard drive.   I turned off Superfetch to listen to the record and it made no difference.

  I left the PC running on its own after turning off any energy saving features and when I came back to it, I finally found that the keyboard was a lag now, too, I had to wait about 30 seconds for something to wake up until the keyboard is recognized.   It seems that it is the same problem that mouse, but at a later date.  I then re active features and screen saver and keyboard lag reduced significantly saving energy.

  Then, once, I got a huge amount of lag when Google open white paper screen, the mouse cursor wouldn't move at all for a long time or erratically.   In this case, I thought to 'pull' the wired keyboard and the trackball at the back of the card, and the problem immediately disappeared as if there were conflicts.

  However, this did not last long, and about an hour later, the mouse pointer lag appeared.  Don't forget this mouse worked fine for a year on an Asus card and withdraw it very well.

  My next attempt with the Bios, and it happened unexpectedly.  This motherboard has a utility to start Bios screen where I can put my own splash screen and no the Biostar on a difficult start.  So I did and all of a sudden all the problems cleared up!    It was as if something in the Bios was hung in, and then there is this whim of hard drive noise and once again, lag lag lag on my mouse.   With 16 GB of ram and 1 GB of video ram?  Just to not use the Aero's office, no sense at all to me.

  Tried to contact Biostar for 12 days now, no response.  Have the latest drivers for vista from windows for the keyboard of entertainment and mouse, service pack 2 for Vista and a 1 TB hard drive, 500 watt antec PSU, problem occurs with or without overclocking.

  Anyone?  Anyone?

  AMD Phenom 2 1090 t black edition 3.2Ghz

  HD4650 diamond! GB

  Corsair XMS3 DD3 x 4 1066 4 GB

  1 TB of Seagate SATA

  Antec 500W PSU Green

  Note: This map has a header of a CD rom, but also the DVD Sata PATA

  Latest

  I could no longer the transceiver Bluetooth 2.0 with the mouse and keyboard.  I went to a keyboard and a wired mouse again.   Then a few days later I decided that I would plug the transceiver Bluetooth 3.0.  This time it installed fine even if I had uninstalled the Intellipoint software.   I went then to the receiver Bluetooth 2.0 and it didn't work anymore.  I did a reboot between the two, and suddenly I saw a Microsoft update will appear at the bottom right of my screen.  I left it to update, and then he said that I could connect other bluetooth devices other than my keyboard of entertainment game.

  Well, this is not true at all, for the entertainment keyboard transceiver pairs automatically.    Yet, this message appeared.  When I went into the control panel to verify the situation once again, I found that there is no Bluetooth icon.   From what I've read on other Vista users using a transmitter of 3rd Bluetooth part, it seems that the Bluetooth stack has disappeared because I mixed the two Microsoft Bluetooth transceivers.    Something else occurred as well, it reminded me of moments where I would install a new installation of Win98 and some drivers as the main card drivers were not yet installed.  He will have to restart the system and over and over again for each driver be seen, and if we were out of sequence, should be made to remove and start over again until all have been installed.  In this case, it seems to be the same kind of priority when it comes to the way in which the Bluetooth drivers are installed.  When I removed the Bluetooth 2.0 transmitter/receiver and replaced by unity Bluetooth 3.0, I seem to have rid one of these priorities, let the program update that must have been stuck in the pile of pilots, how the keyboard and the mouse works perfectly now.

  With 3 wireless transmitter that is I can no longer use the Bluetooth 2.0, one all the more, I plugged it in different USB ports and we saw him, but it was not enough to cause any installer to appear.   It's as if they are reticulate together now, and I can no longer use the add a device feature.   Even if I add the second transmitter/receiver, it is simply ignored.

  Since then, right now I have no need of an additional feature and the keyboard works very well, I'll keep this configuration until I have to reinstall the motherboard still when I start then a clean Vista install.  Unfortunately the new motherboard that I received does not work as I had hoped it would be, not that it would affect the situation above, that's simply not what I was told it was, and I plan to return it the manufacturer once more.

• My Wireless Laser Mouse 7000 does not load correctly

  When I go to load my mouse that it will begin charging and the Green led will be lit. But after all minutes the green light turns off and then it starts flashing red. The charge only lasts for 10 minutes. Is there something that can be done to solve this problem?

  Hi MageeT,

  If it works well before?

  (a) replace the battery

  (b) check whether the device works on another computer

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Microsoft Wireless Notebook Laser Mouse 7000

  How can I find and open the compartment to batteries?

  Hello

  Hope this will help you

  This is just to show that you were the battery is unless you are having a problem with your, then you may be interested in the Advanced...

  http://turbulentsky.com/Microsoft-Wireless-Laser-Mouse-7000-8000-flashing-red-led-battery-doesn ' t - charge.html

  Concerning

  GT4U

• Microsoft wireless laser mouse 8000__

  I have a microsoft 8000 wireless laser mouse.  the problem is that when I put it on the charger it flashes green for about a minute, then he made a flashing red fast.  If anyone can tell me what is the problem I would really appreciate it.  Thank you a_trekker

  I have a microsoft 8000 wireless laser mouse.  the problem is that when I put it on the charger it flashes green for about a minute, then he made a flashing red fast.  If anyone can tell me what is the problem I would really appreciate it.  Thank you a_trekker

  Hello

  http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=084

  battery empty? or not connected? DoD you have intellipoint 7?

  have a nice day [url] [color = blue] www.microsoft.com/security download and install updates from Microsoft Update security! [/ Color] [url] [url] http://windows.microsoft.com/en-US/windows-vista/help/using [color = blue] Windows Vista: Top Solutions [/ color] [url] [url] http://www.windowslive.com/HowItWorks [color = green] how to use Windows Live [/ color] [url] [url] [color = blue] http://windows.microsoft.com/en-US/windows/help Windows Help & how-to [/ color] [url] [url] http://windows.microsoft.com/en-us/windows-vista/help/top-solutions [color = blue] Windows Vista: Top Solutions [/ color] [url] [url] http://www.microsoft.com/windows/internet-explorer/default.aspx [color = green] Internet Explorer 8 : Homepage [/ color] [url] [url] http://windows.microsoft.com/en-US/windows/help/internet-explorer?browser=ie8 [color = blue] Internet Explorer Help home [/ color] [url]

• New Notebook Laser Mouse 7000 - click on the button does not work so it is unusable

  If this is the wrong forum, please let me know. I couldn't find an obvious forum for mice. My old wireless mouse does so after much research, I chose a Laser Mouse 7000 and ordered online. I have download the drivers, follow the instructions for setting up and pressing the buttons, the installer with ALL THE BUTTONS by DEFAULT, reset and CLICK does not work. It acts like I am struck by right click. I tried moving, rearranging button settings, nothing works. When I go into control panel it says it is not working properly, but this certainly isn't. I also restarted x 2 to try to make the problem go away.

  It is a defective material, so should I just sent to the seller? That I've already lost too much time on this stupid thing. If I didn't always have a wireless mouse, I would not be able to use my PC

  Windows vista 64-bit standard

  Oh, I try the product. I have to enter the product number. It is very very small and very difficult to read, but I can enter the product correctly, I think. But here is the message that I will be back:

  "The product ID does not match the selected product.
  The product ID you entered is for Microsoft Wireless Notebook Laser Mouse 7000 (all languages), which is different from Microsoft Wireless Laser Mouse 7000 (all languages) you selected for support. Please enter the ID number of the product for Microsoft Wireless Laser Mouse 7000 (all languages) or click Select the product to select the right product. »

  WTF?

  Hello

  Microsoft Hardware Support access in the United States is 1-800-936-5700

  Dial the number and when he asks PID just say you don't know. You will need to give to the
  Tech answers so have a magnifying glass very convenient. There could be a more easy to read number on
  the receiver.

  Believe it or not, I had exactly the same experience with my entire keyboard and mouse, and I am
  in the meantime the new series arrived. Rob - bicycle - Mark Twain said it is good.

• Use Microsoft Wireless Notebook Laser Mouse 7000. Horizontal scrolling does not work

  Original title: mouse scrolloing problem

  I just bought a Microsoft Wireless Notebook Laser Mouse 7000 and my scrolling does not work, is their a way to implement or to solve this problem?

  Hello

  1. the problem occurs on a particular application?

  I wish that you follow all the methods in this article to resolve the problem.
   
  The problems with the mouse button or scroll the parameters
  http://support.Microsoft.com/kb/303091

• pointer is not displayed for Microsoft Laser mouse 7000

  Original title: Microsoft Laser mouse 7000... pointer is not displayed?

  Mouse Microsoft Laser 7000 used on HP laptop. Pointer icon has disappeared from the overnight! What is a computer or mouse problem? How can I fix it? DWH

  Hi DarrylHartung,

  I suggest you to follow the steps in the article in the Microsoft Knowledge Base and check if it helps.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  You can also view the article mentioned below and follow the steps to solve the problem:

  IntelliMouse pointer responds slowly or not at all

  http://support.Microsoft.com/kb/259039

  I hope this helps!

• Bluetooth Stack for Windows by Toshiba with Microsoft Wireless Laser Mouse 8000

  I use the battery Bluetooth for Windows by Toshiba - Version v5.10.01 (T) and I am trying to connect to my Microsoft Wireless Laser Mouse 8000. But the Bluetooth stack does not even see the mouse.

  It only works with the dongle... but I don't want to use a dongle when I already have Bluetooth installed in my laptop.

  Any suggestions appreciated

  Hello
  Before starting any discussion can you please tell us which laptop model you have?

  BTW: What is your BT mouse has own dongle BT?

  See also http://aps.toshiba-tro.de/bluetooth/pages/faq/keyboardnotworking.html

  Good bye

• install Microsoft wireless laser mouse 6000

  Hi, I bought used ms laser 6000 wireless mouse, this one: http://www.microsoft.com/hardware/en-us/d/wireless-laser-mouse-6000 and now I can't find it on the bluetooth on my laptop, I have Bluetooth v2. The mouse requires installing with usb receiver or is it regular bluetooth mouse like those of ebay, you can buy?
  I don't have a usb mouse with receiver and I thought it's ok because it should work on the bluetooth connection, but I can not connect, bluetooth it will not identify not even with the 'Connect' button on the mouse. the mouse works because the laser light is on.

  It is not a Bluetooth mouse.  This is a RF mouse and requires the receiver supplied with the mouse.

• Microsoft Wireless Laser Mouse/Keyboard Version 2.0/3.0

  Hello!

  I was wondering if I can use my v2.0 USB Microsoft 2.4 GHz TRANSCEIVER that works for my keyboard Microsoft Wireless Laser V3.0 and my Microsoft Wireless Laser mouse V2.0 work for my other keyboard and mouse because I lost the transmitter/wireless receiver I had to for use. Anyway, the keyboard is called: Microsoft Wireless Laser Keyboard 6000 v2.0 and mouse is called: Microsoft Wireless Laser Mouse 6000 (there is no version on that). Also, if I can't use the USB with my keyboard and mouse, I was wondering if someone could fix my mouse? My mouse will not move. I move the mouse and my clicker or this thing won't pass. And then sometimes I can just click on it! Please help on these two problems. Thank you very much!!! (:

  Hello

  For Microsoft hardware related issues, you can have a look at this link:

  http://www.Microsoft.com/hardware/en-us/support/troubleshooting

• Microsoft Wireless Laser Mouse 5000' now works' back (vertical) - how can I fix it?

  I had the same Microsoft Wireless Laser Mouse 5000 for a few years (using Vista) and all of a sudden today, it is backwards (vertical) - can I use it, but it's clumsy - suggestions - I tried to restart, disconnection, battery change, etc..

  I turned the mouse around - but the horizontal then runs in the background! Any ideas out there?  Thank you...

  Ideas:

  You have problems with programs
  Error messages
  Recent changes to your computer
  What you have already tried to solve the problem

  Hi teach007,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  See the Microsoft articles below and try the steps mentioned them, check if it works.

  Troubleshoot a wireless mouse that does not correctly

  http://support.Microsoft.com/kb/321122

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  http://support.Microsoft.com/kb/838398

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.