Microsoft NET Framework 3.5 is required to run the Catalyst Control Center.

Similar Questions

• A security update for Microsoft Visual C++ 2010 Redistributable Package (KB2467173) cause problem with Catalyst Control Center

  I use the HP Pavilion G6 1117tx with

  AMD Radeon HD 6470 M driver version 8.882.2.0 i.e. graphics card and

  Intel Graphics HD 3000 driver version 8.822.2.0, it came as a complete with

  Microsoft Visual C++ 2010 version 10.0.30319 on the site of sellers.

  And after I installed upgrading security for Microsoft Visual C++ 2010 Redistributable Package (KB2467173) it would cause a problem with the launch of the

  Catalyst Control Center version 2011.0817.2216.38121 the catalyst control center would launch and accident immediately but she always see the process running in the Task Manager.

  I removed all the drivers and the software associated with the control center catalyst with Microsoft Visual C++ 2010 and reinstalled all the package and tried the update, but still the same problem that led me to the conclusion the problem was with the update.

  Assistance would be appreciated. Thank you

  Good morning Mukul,

  Thank you for your response.

  I appreciate your time.

  Please refer to the suggestions marked as answer Andrew.Wu, Moderator on 24 January 2011 and check.
  https://social.msdn.Microsoft.com/forums/vstudio/en-us/10f5ba3a-b0bd-4f53-AC02-fa8634953dd0/Visual-Studio-2010-keeps-causing-display-driver-to-crash?Forum=VSSetup

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  Please keep us updated on the status of the issue.

  Thank you

• Error installing Microsoft NET Framework 3.5 Service Pack 1 Setup program has detected that this computer does not meet the requirements to install this software

  I need to install Microsoft NET Framework 3.5 Service Pack 1, as it is necessary to perform a Dell diagnostic Test, but I've been advised that: Setup has detected that this computer does not meet the requirements to install this software. Requirement: Windows install 3.1.

  However, when I look at the download page of Windows Installer 3.1 is not actually as for XP with SP3. I tried anyway and: Setup has determined that the version of Service Pack for this system is newer than the update you are applying. There is no need to install this update. Well actually it is there...

  Is there a way to get around this?

  See below articles for solution

  1 system requirements for the .net framework

  http://msdn.Microsoft.com/library/8z6watww.aspx

  2 download links for .net framework

  http://www.Microsoft.com/net/download

  or

  http://msdn.Microsoft.com/en-us/library/5a4x27ek

  3. top 8 resources for .net framework

  http://www.Microsoft.com/net/itprofessionals

  4 dependencies and Versions of .NET framework

  http://msdn.Microsoft.com/library/bb822049.aspx

  5 frequently asked questions
  http://msdn2.Microsoft.com/en-us/netframework/aa497323.aspx

  6. management of versions, compatibility and run side-by-side in the .NET Framework
  http://msdn2.Microsoft.com/en-us/netframework/aa497340.aspx

  Good luck

• What is Microsoft NET Framework programs and I can uninstall to get space, or are they important to the operating system and my pc works?

  Microsoft NET Framework programs are indicated with a number in the box sizes when I go to the dialog box to uninstall but I don't know what they are and as they have Microsoft and NET in the titles, I think twice about uninstalling to win space in case they are something important. I have no idea what it is, never use it and if I don't need it would uninstall but I'm not sure I should because it might be important and actually run in the background while I use the pc for other tasks. Someone knows and can explain what are these programs? I appreciate it and appreciate help for an admitted car computer illiterate full below all new novice owner, trying to get the hang of it, but I'm trying! Thank you!

  .NET framework components are required by many programs to work. They provide common functions for them.

  http://en.Wikipedia.org/wiki/.NET_Framework

  Why do you need to "save space"? Programs do not take a lot of space given the size of modern readers. The values shown in programs and features, are unfortunately often inaccurate.

  If you are new to computers, avoid changing the way Windows is set up. It's the surest way to cause you problems. Relax and enjoy using the programs you like instead of worrying about what's going on under the hood.

• I need assistance with Microsoft Net Framework 3.5 SP1!

  An application requires Microsoft net framework 3.5 SP1 and download it as a whole to the top. 3.5 SP1 requires 3.5 which requires 3.0, which gives me this error:

  You must use "Turn Windows features on or off" in Control Panel to install our Microsoft .NET Framework 3.0 configuration.

  Here's my window "Turn Windows features on or off":

  Luis Pina III A

  http://blogs.msdn.com/b/astebner/archive/2007/03/14/mailbag-what-version-of-the-NET-Framework-is-included-in-what-version-of-the-OS.aspx

  To solve the problems of installation of .NET Framework:

  http://blogs.msdn.com/b/astebner/archive/2008/03/07/8108332.aspx

• Norton deleted and Microsoft .NET Framework - why security search bar? When these extensions available for Firefox 4? How can I go back to the previous version?

  After having downloaded and installed the new Firefox 4.0, I learned 2 extensions could not be installed. A notice would monitor the compatibility and availability and would notify me when those extensions are available. So who's going to happen, I prefer to use Norton Security when searching on the web and don't know what did Microsoft NET Framework, so don't know how important it is.

  Symantec needs update their Firefox Add-ons to make them compatible with Firefox 4. They indicated that, for Norton 360, they plan to release a update of Norton 360 to support Firefox 4 in early may - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web & docurl = 20100720113635EN & ln = en_US

  I don't know about the time scale for the updates for other Norton products. Waiting for the update by Symantec, if you want to use Norton modules, you will need to downgrade to Firefox 3.6.

  Downgrade to Firefox 3.6 first of all uninstall Firefox 4, but do not select the option 'remove my Firefox personal data '. If you select this option, it will delete your bookmarks, passwords and other user data.

  Then you can install the latest version of Firefox 3.6 available to http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your favorite courses, passwords etc.

  I recommend, to avoid possible problems with decommissioning, accessing your profile folder and delete the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Delete these files will force Firefox to rebuild the list of installed extensions, check their compatibility and cancel the toolbar customizations.

  For more information on how to find your profile folder, see https://support.mozilla.com/kb/Profiles

  Module additional Microsoft NET framework also supports ClickOnce, I never found any need.

• Microsoft NET Framework 1.0 error when installing Corel PaintShop Photo Pro X 3.

  OT: NET Framework 1.0
  I installed Corel PaintShop Photo Pro X 3.  It downloaded from the disc successfully but I cannot open the creation project. Windows I says error hae a Microsoft NET Framework 1.0.     When I try to open the program (Corel) I get a message that the application has generated an exception that could not be treated.  No registered JIT debugger was specified.  Other programs on the disc open OK.

  Salvation by the Lake.

  1. what operating system do you use?

  I suggest you to ask your question in the form below for better support.
  http://www.Corel.com/servlet/satellite/us/en/content/1152796555474

• Error code 66 is to update security for Microsoft NET Framework 4 on Windows Vista (KB2160841)

  When you try to install the update of security for Microsoft NET Framework 4 on Windows Vista (KB2160841) I get an error 66 a code, I can't identify the problem, I tried to install this update for some time (of the month) any other facility of updates without problem.

  Take a look at this:
  Windows update error .net framework 4 will not update - 66A error code
  http://social.msdn.Microsoft.com/forums/is/netfxsetup/thread/02b7b01f-2a04-4352-AFEB-3a5250ebe0ef
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• At least once a day Microsoft net framework appears as an update? Why is it so?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  What is a .net 4.0 security update?

  If so, try this:

  Credits go to jacvc and Control_tps (http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/ee945c20-a8c1-4b82-9b4c-d6dfae4c5337)

  Try the following steps, please:

  1. go in programs and features, click on it.

  2. scroll to the bottom for Microsoft.Net Framework 4 Client Profile, do a right click.

  3. we will give you a choice of uninstall/change, click it.

  4. then it will give a choice to repair, choose repair.  It will take about 4 to 10 minutes to repair (with my PC), your experience may vary.

  5. Once finished, go to your update and new Update Center.

  If this doesn't fix it, try to remove .net Framework 4.0 with the .NET Framework Cleanup Tool (http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx), reinstall .net Framework 4.0 and try to reinstall the update.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• I have Microsoft NET Framework 3.0 SP 2 and .NET Framework 3.5 SP1 don't I need both

  I'm trying to save space on my XP Home edition.  I have Microsoft NET Framework 1 and 2.0 SP2 (191 MB) NET Framework 3.0 SP2 (182MB) & Net Framework 3.5 SP1 (30,66 MB) do I have all these or I can remove it at least one by thanking Gormaur

  Hello

  I suggest you to remove any version of Microsoft .net Framework, because it could affect the performance of the operating system.

  You can use the disk cleanup utility to free hard disk space. See the steps in the following article:

  Description of the tool in Windows XP disk cleanup.

  http://support.Microsoft.com/kb/310312

• I have microsoft net framework 2.0 service pack 2... and msnf 3.0 sp2... and msnf 3.5 sp1... and the microsoft compression client pack 1.0 for windows... should I all of this on my computer?

  I have microsoft net framework SP2 2.o... and sp2... msnf3.0 and msnf3.5 sp 1... and the microsoft compression client pack 1.0 for windows... should I all of this on my computer?

  See:

  What is the .NET Framework, and I need all these versions?
  http://ask-Leo.com/what_is_the_net_framework_and_do_i_need_all_these_versions.html

• Microsoft for Microsoft .NET Framework 1.1 SP1 security update

  When enabled Microsoft update, the following message is received: the following updates have not been installed.  "A security update for Microsoft. NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2656353.  My operating system is Microsoft Windows XP Home addition.  I tried Microsoft difficulty It Center, which has not corrected the problem. Help

  Hello

  ·         What tool Microsoft Fixit did you run?

  ·         You get an error code?

  ·         You are able to install some other updates?

  Follow these methods and check if that helps.

  Method 1:

  You may need to repair your installation of .NET Framework, if you upgrade your operating system or if the installation of the current framework is damaged. This article explains how.

  How to repair an installation existing.NET Framework

  http://support.Microsoft.com/kb/306160/en-us

  Method 2:

  This describes step by step how to solve problems that you may experience when you install the .NET Framework 1.1 in Windows XP.

   

  How to repair an installation existing.NET Framework

  http://support.Microsoft.com/kb/824643

   

   

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/download/en/details.aspx?ID=33

   

   

  Method 4:

   

  To install this security update, you must have Microsoft Windows Installer 3.1 or a later version installed on the computer. For the latest version of Windows Installer for the computer, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

   

  See also:

   

  MS09-061: Description of the update of security for the Microsoft.NET Framework 1.1 Service Pack 1:13 October 2009

  http://support.Microsoft.com/kb/953297

• Securty update for microsoft net framework on windows xp Server 2008 x 86 {2572067} 1.1sp1 could not be installed

  tried several times ms11-078 security bulletin

  Hi johnhayes003,

  1. Did you the latest changes on the computer?
  2. You receive an error message when you install the update?
  3. You are able to install some other updates on the computer?
  4. You have security software installed on the computer?

  Method 1

  I suggest that reset you Windows Update for default components and try to install the update, check if it installs properly.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2

  If the previous step fails then I would suggest that you manually download and install the update.

  Security Update for Microsoft .NET Framework 1.1 Service Pack 1 on Windows XP, Windows Server 2003 (64-bit), Windows Vista and Windows Server 2008

  http://www.Microsoft.com/download/en/details.aspx?ID=27715

  If the previous step fails then I would suggest see you the update history for the complete error message related to the failure of the update and post back with the details.

  (a) open Windows Update by clicking Start , all programsand then click Windows Update.

  (b) in the left pane, click view update history.

  (c) to view more information about an update, double-click it.

• Update to Microsoft Net framework 3 service pack 2 can I keep the 'old' or do I have to uninstall the

  • I have Windows XP Home Edition and I update through the Download Center.  I don't know whether to keep old service pack or not when the new ones are installed.

  * original title - when updated to service pack 2 for Microsoft Net framework 3 can I keep the 'old' or should I uninstall them. I have Windows XP Home edition. Thank you *.

  If you refer the download files, keep the incase you ever need to reinstall .NET that some of them may be prerequisets for future updates or service packs.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Microsoft NET Framework 4.5.1 do I need?

  By mistake I uninstalled the program Microsoft NET Framework 4.5.1 on my PC how can I get that back? Do I really need on my PC?    I use the Windows 7 Pro.  Not sure I want to up grade to W10 still...

  Windows 10 comes with .NET Framework 4.6 as a core component, and it will be installed with the operating system.

  John