Microsoft Notebook Mouse 5000 does not work and disappear after about 30 seconds of devices

I have windows 7 and when I load my notebook mouse 5000 it displays in the control panel and devices and says that it has been added successfully and you can see, but it doesn't work no and a\fter ap; PROX 30 seconds it disappears

Hi Ian,

Here are a few troubleshooting steps that you can try to solve this problem.

 

Method 1: Run the corner hardware store and check.

Consult the following link:

http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

If the method above does not work, proceed to the next method.

Method 2: We will completely remove the mouse and reconfigure.
Connect a Bluetooth device that are neither require a TRANSCEIVER

http://support.Microsoft.com/kb/952818

If you have additional problems, please reply to this post and we will be happy to help you further.

Tags: Windows

Similar Questions

  • My Bluetooth laser Mouse 5000 does not work correctly.

    Original title: Laser Bluetooth Mouse 5000

    I have a Microsoft Bluetooth Notebook Mouse 5000 that has worked, but no longer works.  Read everything here makes me think that he must be a genius to get the updated drivers.  I thought it was 'plug and play' not what I expect from Microsoft at all.

    http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  • Wireless Mouse 5000 does not work correctly when moved away from the transmitter.

    I have the mouse as shown in the title with new batteries.
    Link: http://www.microsoft.com/hardware/en-us/p/wireless-mouse-5000/MGC-00017
    My installed OS Windows 7 x 64 SP1. A clean installed on the computer without additional software in the meantime.
    When I connect the transmitter (2.4 ghz v7.0 model 1423) the mouse to the computer, it identifies only, and the mouse works.
    In devices and printers, the transmitter is under indefinite and after installing IntelliPoint 8.2 64-bit for Windows 7, it remains the same.
    Sometimes the mouse does not react on the screen, as it got stuck and moving in parts rather than sequentially. Including the mouse buttons that do not meet at the moment.
    If I bring the mouse close to the transmitter, the problem goes away and it works fine.
    After the test, no relation to the load on the processor, the problem appears randomly.
    I tried to replace USB ports but no change, the problem goes away only if I put the mouse close to the transmitter.
     
    Original title: Wireless Mouse 5000

    Hello Tomer,.

    Thanks for the reply.

    You can check the following items and check if it helps to solve this problem:

    The wireless keyboard or mouse may not respond and may start and stop at irregular intervals
    Troubleshoot a wireless mouse that does not correctly
    Troubleshoot the incidents of the response to the mouse or wireless keyboard

    If the problem persists always, as mentioned above, contact Microsoft Hardware support for assistance. All material related to problems are treated by them.

    Email us if you have any other issues related to Windows.

  • IntelliPoint 7.1 - Bluetooth Notebook Mouse 5000 is not listed

    Hello

    I have the same questions... like a lefty mouser, I would like to disable the left button (default is [back]). But there is no way to do it without a driver. And there is apparently no driver.

    Please add the Microsoft Bluetooth Notebook Mouse 5000 to the list of mice available on this page, so I can choose the right Intellipoint software to download:

    http://www.Microsoft.com/hardware/download/download.aspx?category=MK

    Thank you kindly!

    PS. I'm pretty sure that's what everybody asks...

    PPS. I am running Windows XP Professional, 32-bit edition.

    Hi IsLNdbOi and Wi - Fi of Willie,

    The Bluetooth Notebook Mouse 5000 does not assignable keys and does not use the Intellipoint software.

    Chris
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My screensaver on Vista does not work and I have a wireless mouse.

    Original title: HID Non-User Input data filter (KB 911895)

    My screensaver on Vista does not work and I have a wireless mouse.

    I can't find the update Microsoft - other hardware - lay HID Input Data Filter (KB 911895) I checked update history and he's not here.  How can I download it?

    Hello

    · What is the number and the model of the wireless mouse, you work?

    See the link below and try the following steps: the screen saver does not start after the installation of a wireless pointing device: http://support.microsoft.com/kb/913405

  • Microsoft sidewinder gamepad 2 does not work on the Combat Flight Simulator WW11 and Europe series

    Original title: I have the Combat Flight Simulator WW11 and Europe series. My microsoft sidewinder gamepad 2 does not work on my XP and my Windows 7 computer. The joystick works on CFS2 Pacific. Help, please.

    I have a HP Pavilion p6717c with a radion HD 6900 graphics card. With windows 7 home

    Hello

    1. don't you make changes to the computer until the problem occurred?

    2. you get any error message?

    I suggest you to see link below and check if it helps.

    You experience problems when you use a Sidewinder Force Feedback Pro joystick with Flight Simulator on a Windows 2000, Windows XP, or Windows Vista-based computer: http://support.microsoft.com/kb/294672

    How to fix game controllers in Microsoft games: http://support.microsoft.com/kb/831361

    Items of Combat Flight Simulator: http://support.microsoft.com/combatflightsimfaq

    Also I suggest you to send your request in the below link.

    http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

    Hope this information is useful.

  • My CD/DVD on computer does not work and I can't update the Office XP Service Pack 3. Microsoft can do for me?

    The CD/DVD on my computer does not work and I can't update the Office XP Service Pack 3.  Microsoft can do for me?

    Hi Nancy,.

    I suggest you provide more details as to how the problem came to be or how and when it happens. There are many experts here, but you must give specific details
    See you soon ~
  • try to do an update and it gives me an error code 80240016 and when i run Microsoft solve this trobuleshooter it does not work and tells me an occure\red error.

    try to do an update and it gives me an error code 80240016 and when i run Microsoft solve this trobuleshooter it does not work and tells me an occure\red error. How can I fix it?

    Hello

    1. what patch did you try?
    2. update you are trying to install?

    Method 1:
    You can follow the steps in troubleshooting this article and check:
    Problems with installing updates
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Method 2:
    You can also try the steps from the link:
    Windows Update, error 80240016
    Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.
    http://support.Microsoft.com/kb/957307

    Method 3:
    You can also perform a clean boot, and then try to install and check.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

  • My touchpad does not work and the usb mouse works

    After connecting with a USB key, my touchpad does not work and the USB mouse works

    Hi, Dieudonné,

    Make and model of computer?

    Have you tried to uninstall the drivers for the touchpad.  Update?

  • Adobe Acrobat Reader 8 and Microsoft Office word 2007 does not work

    They gave me a laptop Sony Vaio FRO my birthday about a month ago. I work from home, I work online and I use everyday in my computer. The two programs I use the most are gives me a hard time and not let me use a reason any. The software came on the laptop so I called Sony and they told me that it should work fine, and if I have problems to contact microsoft. Well, my point is its does not work and it is causing me loose not being able to work money. Im very frustrated and im desperately need help. Please if anyone can tell me what to do to fix this problem I would be very happy. IM at my wits end here. Acrobat 8 reader telling me I need a serial number to continue using the program and will close and I lose all my work. Also, Microsoft Office Word 2007 again I need a product key number. I use these programs daily to work, I can't cope with this. They keep making me lose all hours of work ive done. Help, please!

    Adobe Acrobat Reader is free, it shouldn't charge for continuous use.  Packages of creator Adobe (Adobe Acrobat Standard, Pro, Pro Extended) cost money.  Microsoft Office is often loaded on a computer as a trial package.  You need to follow up with Sony on these items to make sure if they sent packets of the trial or fully paid packages, and if they are supposed to be freed from the packages that your only relief must come from Sony - we cannot help you here.

    "bignich" wrote in the new message: * e-mail address is removed from the privacy... *

    They gave me a laptop Sony Vaio FRO my birthday about a month ago. I work from home, I work online and I use everyday in my computer. The two programs I use the most are gives me a hard time and not let me use a reason any. The software came on the laptop so I called Sony and they told me that it should work fine, and if I have problems to contact microsoft. Well, my point is its does not work and it is causing me loose not being able to work money. Im very frustrated and im desperately need help. Please if anyone can tell me what to do to fix this problem I would be very happy. IM at my wits end here. Acrobat 8 reader telling me I need a serial number to continue using the program and will close and I lose all my work. Also, Microsoft Office Word 2007 again I need a product key number. I use these programs daily to work, I can't cope with this. They keep making me lose all hours of work ive done. Help, please!

  • Microsoft Teredo Tunneling adapter does not work correctly and my pc works too slowly to start and stop.

    Original title: hardware device

    Please help me...

    My Microsoft Teredo Tunneling adapter does not work correctly... I tried to reinstall it but it is impossible to install...

    So what to do so adpter may work correctly...

    And my pc runs too slowly (at startup and shutdown also)

    Help help me soon...

    Thank you...

    Hi Harshhh36,

    Usually, after the computer restarts, the drivers install automatically and it will stop the errors.

    You can also refer to the computer or the network card manufacturer's Web site to download and install the latest version of the drivers for the network card.

    You can also check in the updates of windows updates available for the network adapter driver.

    For more information, see the article:

    Automatically get recommended drivers and updates for your hardware

  • Re: Left mouse button does not work on Satellite L

    Hello

    I bought this computer notebook June 2010 and I never had no problem recently while watching movies has suddenly stop and happens quite often... and recently, I noticed that my left mouse button does not work correctly

    all useful suggestions please

    Thanks in advance
    Pramod

    Hi pramod_1,

    Have you tested an external mouse if the problem is maybe a few related software?

  • Touchpad does not work and Equium automatically restarts after a stop

    Something going wrong drasticaly yesterday. I wasn't doing anything elaborate, just work excel and I'm tired of the Tablet touch and 'connected' one infrared I smile sometimes use... it did not work too well, low battery level, I guess, so I returned to the touch pad... but the touchpad was now for some reason, doesn't work do not at all and did not since...

    Turning off the laptop and was my solution, but he has not corrected the situation... the infra-red mouse works very well but with new batteries... on top of that, now when I turn the laptop off, it stops but then automatically starts once again, when a microsoft message appears saying that the computer has recovered from a serious error.

    So since this episode, the touch pad does not work and the computer will stay off! And maybe it's me crazy, but some of the keys on the keyboard are more sensitive as they once were.

    It was a satellite, and bought only in early January.

    If anyone can help I would appreciate it a lot.

    Thank you

    Hello

    Sound very mysteriously. However, as in the first answer mentioned the function FN + F9 turn off and turn on the touchpad.
    I also recommend to check the Device Manager if all devices are working properly.
    If you find any errors, but the problem persists then the step of text should be the reinstallation of the operating system. In this case, please use the recovery CD.

    If the recovery procedure will not solve the problem, I guess there must be something wrong with the hardware and the ASP help is needed. Guys could start diagnostic tests and can locate the fault.

  • I need a driver/files mouhid.sys, my mouse support does not work. Please thank you!

    I need a driver/files mouhid.sys, my mouse support does not work.  Please thank you!

    Hmm, a strange thing to have disappeared.  Do you have a virus or checked for malware scanner?

    The mouhid.sys file is supposed to be in % systemroot%\system32\drivers.  You pouvez find a copy of it in % systemroot%\dllcache.  If it's not in... \drivers and is in... \dllcache, recopy the... \drivers.  (You may need to do this in Mode safe.)

    Except for the above bit of luck, there are several ways to recover.

    1. use msconfig:

    Get your installation CD or locate a copy online
    Since an administrator account, run msconfig ( -R, msconfig)
    When "msconfig" opens, select the "Général" tab and click on the button "expand file...". »
    (This will open the window to "Develop a Source of Installation file")

    Enter 'mouhid.sys' in "file to restore:
    Enter the path to the DRIVER. CAB file in the \i386 on your installation media directory.
    (or browse to...)
    Enter "c:\windows\system32\drivers" in the "save in:" entry.
    Click "expand".
    'mouhid.sys' is now where never told you develop to...

    2 use the utility auditor of system files (SFC) to check the missing files and restore them if necessary.
    You will again need your installation media and, if you have installed the Service Packs, the CD-ROM for
    the latest Service Pack, you have installed.

    From an administrator account, type: -R, sfc/scannow

    SFC calls for, first of all, your installation media, and then later the service pack CD-ROM.  If SFC wants to replace the files, leave.  If the SFC rejects your Service Pack CD-ROM, read the KB900910 Microsoft Knowledge base article.  Note that this article applies to SP2, but is also applicable to the SP3.  Just use your common sense and use SP3 where the article refers to SP2.

    If you don't have a CD-ROM Service Pack 3, or order it (U.S. / Canada , Europe, Africa , Asia or South America ) from Microsoft or download the ISO (here ) and burn it.  Be sure to Select the appropriate language if you download ISO.  Note, I recommend that you install Service Pack 3 on a CD-ROM, rather than through Windows Update so that youpouvez use SFC with success!

    Please, vote if it is useful!  Please, click on Mark as answer if that answers your question.

  • My optical mouse 3000 does not work even if the red light is on in the background

    My optical mouse 3000 does not work even if the red light is on in the background

    Hi Russell,

    Thank you to contact Microsoft Community and we will be happy to help you with your concern.

    According to the description, it looks like you are facing a problem with the optical mouse 3000.

    It would be great if you could answer these questions to help you further.

    1. have you made changes on the computer before this problem?

    2. you receive an error message or error code?
    3 is confined with any specific application?

    I suggest you to see the steps in the following Microsoft article.


    Mouse, touchpad and keyboard under Windows problems:
    http://windows.microsoft.com/en-US/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

    Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

    Troubleshoot a wireless mouse that does not correctly: http://support.microsoft.com/kb/321122

    We would be more than happy to help you if the steps above did not solve the problem.

Maybe you are looking for