Microsoft ON essential to keep all the time automatically, when the PC is turned OFF? I don't know to do.

Dear Sir/Mam...

I installed Microsoft essential to protect my notebook of virus & spy ware. When I turn off my laptop sound off automatically. Please send me the details to keep essential Microsoft on all the time, even my laptop is OFF please. Icon for turn on essential Microsoft whenever I start my computer. I can't find the related parameters in the ICONS.

Once a computer is turned off, it's... Well well, off the coast.  But not just asleep, off.  By the definition of 'off' it does nothing.  Microsoft Security Essentials is a program and only works when the computer is turned on, as all of your other programs.  You cannot run a program when the computer is turned off.  The good news is that a computer is turned off is completely protected against malware are malicious software programs and does not work either.  There is absolutely no need to have anything by protecting your computer when it is turned off.  That said, I think that your concern doesn't really MSE all the time, but that's automatically done already when you turn on your laptop.  Not to worry.

You see the pop-up warning that MSE has not yet started Microsoft.  If you click on the Start button in the pop - up notification MSE should start (but not immediately).  It may take a minute or two.  If you wait just MSE must start with itself and the notice will go away without having to do anything.

I see the same thing when I run one of my virtual machines that you see when you start your laptop.  I'm very familiar with it.  It goes away in a few minutes and only means that from MSE wasn't the first thing the computer did when I turned on.  Windows moves to finally start MSE, but you can the long hurry up if you want.

To manually start Microsoft Security Essentials, find its icon on the lower right side of your taskbar (called the "notification area").  The icon looks like a Red House with an X on it.  Right-click on the icon and choose open on the pop up list.  The MSE window opens on the desktop.  Click on "Start it now" button in the window that appears.  The window fades.  It may take a little time to start the MSE.  When everything is OK, home in the notification area icon will turn green with a check mark.

When I see the Red House, I usually just give the computer a few minutes to complete marketing and the problem goes away on its own.  On rare occasions I start MSE myself.

Colin Barnhorst

Tags: Windows

Similar Questions

  • my wireless adapter does not pick up all the signals... I don't know why... Please help!

    I'm not sure why I can't my wireless dlink adapter cannot pick up all signals?

    anyone enlighten us?

    Hello

    1. what exactly happens when you try to connect to the Internet?

    2. you get any error message?

    3 have there been recent changes to the computer before the show?

    I suggest you to try the steps mentioned in the link and check if this may help.

    Method 1: Wi - Fi and in Windows network connection issues:

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Check this link for more information:

    Why can't I connect to the Internet?
    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

    Hope this information is useful.

  • I am trying to remove AVG Anti-virus and replace it with Microsoft Security Essentials. I have the basic Windows Defender works but don't know if it includes Security Essentials?

    Have Windows XP.

    Windows Defender does not include Microsoft Security Essentials.

  • If I merge two catalogs that overlap, how can I keep all the data?

    Somewhere in the LR update process in two or three months, I did inadvertently and unknowingly create a second identical catalog. No problem, really, except that I have somehow added to and then edited into two catalogues. This week realized my mistake. I don't know how to return to a single catalog. Each catalog has now has hundreds of unique files and publishes, in addition to the 50 k + files that existed before my error. I need all files and changes; If I merge the two catalogs, I keep all the data? I was about to try an approach of the worksheet using ListView of John Beardsworth plugin, exported to a spreadsheet and calculate unique values, but it is perhaps a bigger than the fusion learning curve, especially if I can keep all changes. I looked at the fusion of information on the pages of LR, but I think I need more information about what the merger is doing with all the data. I want to be sure before proceeding. Similar experiences?

    LR CC 2015

    10.9.5 OSX

    Hello

    The merger would not affect the collections. All collections should be there in this merged catalog.

    In order to filter images that have different metadata (it comes to virtual copies):

    1. Select the folder under which you want to search for virtual copies, or you can select all the photos under catalog Panel.

    2. click on menu Photo > stacking > expand all stacks

    3. click on menu library > filter by genre > virtual Copies

  • Is it possible to keep all the brush strokes, textures and layers of Adobe iPad drawing apps to illustrator CC?

    First of all, I want to say 'Hi' to everyone, because I am a completely newbie in this forum !

    As I am more in love with the design of the apps on my iPad 2 air and as a user of Adobe CS6 Adobe illustrator, I am seriously considering subscribing to CC Illustrator just to fully evaluate all my drawings of iPad in vector format instead of getting jpg or png files.

    Is it possible to keep all the contours, textures and layers EXACTLY as the original drawing of drawing Adobe apps, like Adobe draw or sketch of my iPad to illustrator CC?

    I actually downloaded the trial version of Illustrator CC, I noticed that the workflow is a little different from CS6 (with CS6, I use the trace of the image) and I can send the drawing directly to illustrator CC, but I've always had a PNG / jpg picture I need to work more with the following steps to turn to a vector format true :

    Object > sketching and line drawing > expand path

    and of course all the layers went with the method above. And all original textures and the brush strokes are replaced by the command-line images...

    And when I open a file in Photoshop, sketch a "version 2 of the adobe photoshop sketch file format is not supported in this version of adobe illustrator" message and the file that can open but was in jpg / png?

    Did I miss something? Or it's because I don't have a full subscription to CC? :/

    Simple question first:

    The error message does not appear to say anything - just click 'OK' and it works fine for me.

    Regarding the conversion of the brushes and work, it's a little more difficult.

    In Illustrator, (on my test), features all had a generic brush applied.   To get a better brush, I just clicked on the route of the path and then choose a new brush.

    AND

    If you use Adobe Brush (mobile application), you can design your own brushes and their port on Photoshop or Illustrator.

    BUT

    There are some things that I wasn't expecting with Adobe Illustrator brush that I had not experienced in Photoshop and use with Sketch/draw lots

    The brush behaves differently in applications, so when you're in Adobe brush, there are buttons to help you see how it will look in different applications.

    MORE

    I can't figure out how to get my 'BASIC' brush library to synchronize with my CC Illustrator brush library.   I probably shouldn't have saved my brushes in there?

    If you are planning a workflow from the sketch to the Illustrator, save your brushes in a custom library of CC (on your iPad), then the answer is: sort of.

    Sketch brush behaves a little like Illustrator brushes, but it seems to be a png or another bitmap.

    The brush for Illustrator is vector.

    You can't record two.  I can't understand how you can duplicate, but you can change it back and save it.

    Brush, create your personalized Sketch brushes.

    Make your Illustration

    Send your Illustrator Illustration

    Return to the brush, convert your brushes for Illustrator

    go to Illustrator, convert your artwork in vectorized text

    in the brush library, download and apply your custom brushes.

    It is NOT optimal, but it works.

  • All the desktop icons turned to iTunes

    When an icon is clicked, error message "Windows cannot open this file:rundll32.exe" is displayed.

    Windows XP Professional

    Hello

    1. did you of recent changes on the computer?

    2 when was the last time it was working fine?

    3. do you have security software installed on the computer?

    For the error icons, please see the article below and try the steps mentioned, check if it helps.

    Cannot find the Rundll32.exe file when you open Control Panel

    http://support.Microsoft.com/kb/812340

    Method 1

    For all the desktop icons turned into iTunes I would suggest that you do the system restore point when it was working fine and check if that helps.

    How to restore Windows XP to a previous state

    http://support.Microsoft.com/kb/306084

    Method 2

    If the system restore does not resolve the problem, then check out the link below and run the Fixit tool available, check if it helps.

    Diagnose and repair Windows files and folders problems automatically

    http://support.Microsoft.com/mats/windows_file_and_folder_diag

     

    If the previous step fails then see Microsoft article below and check if it helps.

    How to change or choose the program that starts when you double-click a file in Windows XP

    http://support.Microsoft.com/kb/307859

  • can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop

    can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop

    You define 'Action close lid' to the 'status quo' instead of sleep or Shut down:
    Go to-> double click "Power Options" Control Panel-> 'Select a power plan' under your selected plan, click "Change plan settings"-> "Change plan", click on the blue link 'Change advanced power'-> in 'Advanced settings' tab expand "power buttons and lid"-> extend the action of the 'close' lid, set "on battery" and "Plugged in" to "Do nothing"-> click apply-> OK button

    Multiple monitors: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

    Set up multiple monitors
    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

    Move windows between multiple monitors
    http://Windows.Microsoft.com/en-us/Windows-Vista/move-Windows-between-multiple-monitors

    Understanding multiple monitors
    http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

  • All my icons are the icon of iTunes and I don't know how he got that way.

    All my icons are the icon of iTunes and I don't know how he got that way.

    Run a system restore:

    1. Restoration of the system of search in the start menu and press ENTER.
    2. A box will appear. Click on Next >.
    3. Choose a restore point from before the problem started. If the problem started more than 5 days ago, check the boxview more than 5 days restore points and choose the one you need.
    4. Click on Next >.
    5. The selected restore point is listed. If it is correct, clickFinish; If it isn't, press on <> and choose another, and then repeat this step.
    6. A box will appear asking if you are sure you want to run the system restore. If you are sure, clickYes. The process will take between 15 minutes and several hours.

    Note:
    If you receive an error during the restore, boot in safe mode, and it should work fine. (To start in safe mode, restart your PC and press F8 after the screen with the logo of the manufacturer of your PC (BIOS screen) use the arrow keys to select and enter the choice, the option ofSafe Mode .)
    from: http://teengeek.freehostingcloud.com/help/systemrestore/

    If this does not work, try changing the associated programs with each file: http://teengeek.freehostingcloud.com/tutorials/changedefaultprograms/

    teengeek.freehostingcloud.com Microsoft community contributor

  • e-mail program takes all the mail out to 'off line '.

    I own a MacBook Pro.  I've updated to Capt. 10.11.5.  The e-mail program takes all the mail out to 'off line '.  Is no more, I can send emails.  What should I do?

    < re-titled by host >

    When the mail is opened, click window in the menu bar and run the connection doctor.

    All that said SMTP is your outgoing server, what is the message next to the ashes?

    This article may also be useful:

    If you cannot send or receive e-mail on your Mac - Apple Support

  • If I'm offline (e) all emails deleted id (removed from the phone) also turned off contacts deleted history in safari where contact information would come from contacts

    If I'm offline (e) all emails deleted id (removed from the phone) also turned off contacts deleted history in safari where contact information would come from contacts

    Of the previous function of recipients.

  • When I installed for the first time the creative cloud I did not fit into the second computer and now I don't know how to do this. Can someone help me?

    When I installed creative cloud for the first time I was not installed in the second computer and now I don't know how to do this. Can someone help me?

    Hello

    Please refer to the help documents below to download the application Adobe CC:

    Creative cloud to desktop

    Download, install, update or uninstall applications

    Kind regards

    Sheena

    Moving to the cloud creative download & install

  • I am trying to perform a recovery using the "HP Recovery Manager", but I don't know what I should choose to do so.

    Update Code error 80070490

    There, I had a update failed on Windows Vista Service Pack 2 (KB948465).  I tried the Mr. fix it, but the execution software failed.  Some time later, I'm now at the point where all of the updates fail and gives me the error code 80070490.  I tried the system tool - didn't work.  My computer is preinstalled with vista home premium, so I have no disks.  I am trying to perform a recovery using the "HP Recovery Manager", but I don't know what I should choose to do so.  Choose 'The essential system updates for Microsoft Vista SP 1'?  If so, he wants that I uninstall first.  How can I do this?

    Hello

    For any questions about the HP recovery process, contact HP.

    Here is their Web site about this link:

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

    This is the Microsoft Information about your error code 0 x 80070490

    'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

    http://support.Microsoft.com/kb/958044

    To make the Installation of repair upgrade in the Microsoft link, borrow Microsoft Vista DVD a friend.

    Here is the information on how to do it:

    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    See you soon.

  • HP ENVY m4-1015dx Notebook PC: hp envy m4 battery not charging but fresh when the laptop is turned off

    Hello!

    I was with my hp envy m4 core i7 for quite a while now... recently, I formatted and installed windows 8.1 64-bit installed. I decided to download some drivers from the hp site and I realized I needed to provide my model of laptop model number I could not remember so I decided to remove the battery while the computer is still connected to the power for the number, then I went back to the battery. the latter, I realized that the cell had not accused beyond of 7%, which was the level of support, until I removed the battery and when I checked the charge level, it indicated that it was plugged in but does not support. When I tried to repeat the entire process as well as close the laptop, remove the battery and turning it again nothing work and completely refusing to charge for its on.when I decided to turn off completely and then it was off it perfectly complete accused 100% operating battery estimated more than six hours of charge time, guys help me to understand what might have developed and what will be the best solution.

    Hi @Phanz,

    Thank you for your inquiry.

    I entered which you have tried to download the driver on the HP website for your laptop but realized you need the model number.  You have removed the battery while the laptop is running.  Now when you reinstall the battery, it shows that it is connected but does not charge and continues to 7%.   You have repeated the process and close Notepad and removed and reinstalled battery, but there was no change. If you turn off it charges the battery to 100%.

    You did all your Windows updates?

    Have you tried the troubleshooter in Windows?

    First of all, I would like to try a Windows restore to before remove you the battery.

    HP computers - using the Microsoft System Restore (Windows 8)

    If restore doesn't work or is not possible, you could try a Refresh Your PC to solve problems (Windows 8).

    Then you can try the following steps.

    HP laptops - test and calibrate the battery (Windows 8)

    The battery method compatible ACPI Microsoft control is basically the driver that communicates between the computer and the battery. There is a chance that it became corrupt and bad reads the battery level.

    Step 1. Go to the Device Manager
    Step 2. Select the stacks
    Step 3. Click with the right button on the "Microsoft compatible battery ACPI Control method" which is in the list
    Step 4. Click on uninstall
    Step 5. At the command prompt, put a checkmark in the box to remove the current driver
    Step 6. Shut down the computer

    Step 7: Remove the battery for a minute and then put new

    When the computer returns to the top it should automatically find the driver.

    Step 8. Go to the Device Manager
    Step 9. Select the stacks
    Step 10. Click with the right button on the "Microsoft compatible battery ACPI Control method" which is in the list
    Step 11. Click "automatically search for an updated driver.

    Do the same thing with embedded controller compatible ACPI Microsoft.

    Last option is to reinstall your Windows 8.1 Pro.

    Good luck!

  • "due to an unidentified problem, windows cannot display windows firewall settings" fixed but still can not visit some sites and the laptop now turns off the coast on me. What should I do?

    I have an Apire one laptop with Windows xp service pace 3. I had to restore it to factory about 3 years ago. Some time after that the sound system began to slow and the Synaptics mouse stop working properly. I can move the pointer, but the left click does not work. It works in safe mode but not in normal windows. I used the Acer eRecovery for correct, but it did not work. I tried to download the driver for the mouse on the internet, but some how it could stop the download. I gave up at tring to fix. Some time in late March or early April, I couldn't access internet and after 22:30. I ran the diagnosis that is provided by internet explore and he said that the HTTP and HTTPS worked but the FTP did not work. AVG later told me my firewall is disabled and there was the possibility to reactivate it and I did. After internet explore stop allowing you to enter certain sites that I wanted to enter, I ran the Diagnostics again and he told me that a firewall client has been the cause of the problem. I tried to control my firewall setting, but had that "due to a problem not identified, windows cannot display the firewall settings". I thought AVG was the problem, so I have unintalled then he returned and attempted to access the firewall but got the same message. I typed in Google MySapce and found this site. I followed a few directions given to others in the thread started by joecarpenter33 and discovered that my firewall has been deleted and Base filtering engine has been deleted also. I downloaded and ran Malwarebytes ANti-Malware and SUPERAntiSpyware Free Edition and tdsskiller. MBAM has found a Trojan. The results of the analysis is less to:

    Malwarebytes Anti-Malware (Trial) 1.75.0.1300
    www.Malwarebytes.org

    Database version: v2013.04.10.14

    Windows XP Service Pack 3 x 86 NTFS (secure/setting network Mode)
    Internet Explorer 8.0.6001.18702
    Ziadie Berry: BERRY-LAPTOP [Director]

    Protection: disabled

    10/04/2013-17:44:54
    MBAM-log-2013-04-10 (17-44-54) .txt

    Scan type: quick scan
    Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
    Analyze the options disabled: P2P
    Objects scanned: 271656
    Time elapsed: 43 minute (s), 42 second (s)

    The process of memory detected: 0
    (No malicious items detected)

    Modules of memory detected: 0
    (No malicious items detected)

    The registry keys detected: 0
    (No malicious items detected)

    The registry values detected: 0
    (No malicious items detected)

    Registry data items detected: 0
    (No malicious items detected)

    Files detected: 0
    (No malicious items detected)

    Files detected: 1
    C:\RECYCLER\S-1-5-21-4674304-3331980883-3375822000-500\$7832f44fdd2ba165f6ea01bec7f363fd\n (Trojan.0Access)-> quarantined and deleted successfully.

    (end)

    Malwarebytes Anti-Malware (Trial) 1.75.0.1300
    www.Malwarebytes.org

    Database version: v2013.04.10.14

    Windows XP Service Pack 3 x 86 NTFS
    Internet Explorer 8.0.6001.18702
    Ziadie Berry: BERRY-LAPTOP [Director]

    Protection: enabled

    10/04/2013 23:43:49
    MBAM-log-2013-04-10 (23-43-49) .txt

    Scan type: quick scan
    Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
    Analyze the options disabled: P2P
    Objects scanned: 269636
    Elapsed time: 49 minute (s), 41 second (s)

    The process of memory detected: 0
    (No malicious items detected)

    Modules of memory detected: 0
    (No malicious items detected)

    The registry keys detected: 0
    (No malicious items detected)

    The registry values detected: 0
    (No malicious items detected)

    Registry data items detected: 0
    (No malicious items detected)

    Files detected: 0
    (No malicious items detected)

    Files detected: 1
    C:\WINDOWS\assembly\GAC\Desktop.ini (Rootkit.0access)-> quarantined and deleted successfully.

    (end)

    I ran the Diagnostics today after Internet explore and my other browsers stop allowing me to internet access. That's what came back:

    Diagnosis of last run time: 17/04/13 17:48:14 WinSock Diagnostic
    WinSock status

    attmpting error information to validate the Winsock base providers: 2
    error not all entries could be found in the basic services provider winsock catalog. A reboot is required.
    user redirection of information in support of the appeal

    Diagnosis of network adapter
    Network location detection

    Info to help home Internet connection
    Identification of network adapter

    Info network connection: name = Local, peripheral network connection = Realtek RTL8102E Family PCI - E Fast Ethernet NIC, MediaType = LAN, type = LAN
    Info network connection: name = wireless, peripheral network connection = Atheros AR5007EG Wireless Network Adapter, MediaType = LAN, type = Wireless
    Info both Ethernet connections and wireless available, ask the user for selection
    required user input action: select network connection
    Info Wireless connection selected
    State of the network adapter

    Info network connection status: connected

    HTTP, HTTPS, FTP Diagnostic
    HTTP, HTTPS, FTP connectivity

    WARN HTTPS: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
    warn HTTP: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
    warn HTTP: error 12029 connecting to www.hotmail.com: a connection with the server could not be established
    WARN HTTPS: error 12029 connecting to www.passport.net: a connection with the server could not be established
    WARN FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
    WARN FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
    error could not make an HTTP connection.
    error could not make an HTTPS connection.
    error could not make an FTP connection.
     
    Still, he remains connected to the wirelesss connection, but won't let me access the internet. Right now I use a proxy to help, but access to the sites are limited.

    I used the tweaking software and my firewall is back but, I have yet to visit some sites and the laptop now turns off by itself.

    Hello

    Follow these methods.

    Method 1.

    Start the computer in safe mode with network and run a full scan of computer viruses.

    To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

    Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

    Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

    Method 2.

    If the steps above do not help, then try to scan the computer using Windows defender in offline mode and check if that helps.

    Search for spyware and other potentially unwanted software: http://windows.microsoft.com/en-US/windows7/Scan-for-spyware-and-other-potentially-unwanted-software

    What is Windows Defender Offline? : http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline

    Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

    Method 3.

    You can create a new user account and check. Once the new user account works fine, then copy the data from the old user account for the user account.

    How to copy data from a user profile damaged to a new profile in Windows XP: http://support.microsoft.com/kb/811151

    Let us know if you need assistance with any windows problem. We will be happy to help you.

  • I've been to see the BLUE SCREEN lately and I don't know how to fix it. I already checked the NVIDIA graphics card updates, but it's not!

    I've been to see the BLUE SCREEN lately and I don't know how to fix it. I already checked the NVIDIA graphics card updates, but it's not! I also uninstalled and Reinstalled but I don't think that worked.

    Signature of the problem
    Problem event name: BlueScreen
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033

    Files helping to describe the problem (some files may be is no longer available)
    Mini092911 - 02.dmp
    SysData. XML
    Version.txt

    See a temporary copy of these files
    WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

    Additional information about the problem
    BCCode: 116
    BCP1: 9CEE7510
    BCP2: CA 8, 16700
    BCP3: 00000000
    BCP4: 00000002
    OS version: 6_0_6002
    Service Pack: 2_0
    Product: 768_1
    Information about the server: ce621e4c-18c8-469e-8f97-42590f35c1d9

    AND:

    Description
    A problem with your video hardware caused Windows to stop working correctly.

    Signature of the problem
    Problem event name: LiveKernelEvent
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033

    Files helping to describe the problem (some files may be is no longer available)
    WD-20110929-1029 - 01.dmp
    SysData. XML
    Version.txt

    See a temporary copy of these files
    WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

    Additional information about the problem
    BCCode: 117
    BCP1: 9CEE7510
    BCP2: CA 8, 16700
    BCP3: 00000000
    BCP4: 00000000
    OS version: 6_0_6002
    Service Pack: 2_0
    Product: 768_1
    Information about the server: a59df662-85fc-45dd-a4b0-537bf6e212b3

    Hello

    Check with support of the manufacturer of the system (motherboard for customized systems manufacturer) if the video device
    is integrated on the motherboard. Also check with Nvidia Support, their drivers and documentation online
    and ask in their forums known issues.

    NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
    http://www.nvidia.com/download/index.aspx?lang=en-us

    NVIDIA Support - check with the support that she might be a known issue
    http://www.nvidia.com/page/support.html

    NVIDIA forums - also check for the forums it might be a known issue or others likely to have
    http://forums.nvidia.com/

    -------------------------------------------------------------

    Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
    Troubleshoot BlueScreens - answers top 3 (+ 1 more).

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    ------------------------------------------------------------

    References to Vista also apply to Windows 7.

    Have you updated your screen/video or other large recent drivers - check in Control Panel.
    Updates of Windows to see if a driver has been loaded it. Use this generic utility below
    and when you get to the section driver use the methods in the next message and then back to
    the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
    cause this error.

    Also check with the support of system Maker and video/display of the map because he could be called
    questions - also check in their forums.

    BCCode: 116 0 x 00000116

    Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt
    to reset the display driver and recover a time-out has failed.

    BCCode: 116 0 x 00000116<-- read="" this="" link="" read="" this="">
    * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

    ----------------

    BCCode: 117 0 x 00000117

    Bug VIDEO_TDR_TIMEOUT_DETECTED control has a value of 0 x 00000117. This indicates that the display driver failed in a timely fashion.

    BCCode: 117 0 x 00000117<-- read="" this="">
    * 1276.html http://www.faultwire.com/solutions-fatal_error/the-Display-Driver-failed-to-Respond-in-timely-Fashion-0x00000117-

    1. update the video driver - also look for the BIOS and chipset of low level drivers at the manufacturer of system
    of (card mother manufacturer custom systems). Check with Nvidia Support and forums.

    2 are looking for Virus/Malware.

    3 check the hard disk for errors - run Checkdisk (see below)

    --------------------------------------------------------------------------------

    The inclusion of 116 error in the troubleshooting code is the only coincidence and holds no.
    special meaning (other than pilot caused bluescreens occur with some frequency).

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do without if needed fail or the Vista DVD or recovery command prompt mode
    Options if your system was installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all the)
    possible driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Maybe you are looking for

  • My keyboard navigation lights.

    I used F7, options advanced and checked "use arrows to navigate" and go to about: config to change the navigation with the keyboard from true to false, then again true after I restarted firefox several times. For some reason any the keyboard navigati

  • Portege R100: No restore CD - is WinXP installation possible?

    Hello! I had recently a well used old Portege R100 with a Toshiba PCMCIA CD that comes with it. He unfortunately did not come with the recovery CD and the hard drive has been formatted to him! I tried to install WinXP Pro many times now come to the c

  • Message no longer works on my Air Office

    MacBook Air (11 inch, mid 2013) DDR3 4 GB 1600 MHz Yosemite 10.10.5 (14F1605) Just "upgraded" to an iPhone 6 and 9.3 iOS. Message on the desktop of my computer, does more to send instant messages to my contacts. I have AOL, Yahoo and Google accounts

  • SM Bus controller with a big? in the Device Manager

    I am traveling abroad and I have problems with my A65, in Device Manager, I have a? beside the SM Bus controller. I ve searched for the device driver etc etc and nothing works. Is it hidden with a different set of drivers? I tried to connect a USB ma

  • Satellite L850 - HD Webcam does not work

    Hi, I tried to get my webcam to work, but apparently not, I had a glance online but does not, so you are my last chance before you give up and buy an external one to send back to you. I'll try to give you as much information as possible. I've had thi