Microsoft sculpt Comfort mouse

Similar Questions

• Microsoft Sculpt Comfort Mouse moved

  I bought a wireless Microsoft Sculpt Comfort Mouse to fix on my new laptop Hewlett-Packard.  I followed the instructions in the manual of the mouse, but the laptop does not recognize or device from the list. ("No device found") Blink them blue and red/green mouse.  The batteries are new.

  Suggestions to get installed mouse?

  Hello

  Welcome to the Microsoft community.

  Have you checked Windows Update to determine available updates are installed?

  Try the solutions by Vijay B

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/connectivity-problem-with-the-Microsoft-comfort/e0442a6d-2589-4cc7-a98a-522e6cbe231f

  If still problems try to run the following tests and then repeat the installation of the mouse.

  http://answers.Microsoft.com/en-us/Windows/wiki/windows8_1-system/troubleshooting-component-store-system-files/8acbd614-678d-42B9-859c-56d3e6f8342a

  If still problems, try to contact HP customer care.  If you have recently purchased the computer, it should still be under warranty and service should be free to help you with the installation.

• Matching sculpt Comfort mouse on multiple computers

  I recently bought a Microsoft Sculpt comfort mouse to use with my Dell laptop. I have two Dell laptops that I would use this mouse, step at a time, but when it is docked in a docking station, Dell. So far, it seems that I can only pair the mouse with one machine at a time, causing me to need re-pair the mouse each time I want to use it on another laptop. I spend on laptops (1 for work, 1 for personal use) at least once a day re-pairing the mouse every time is going to be painful solution.

  Does anyone know if it is possible to have the pair of mouse to these two machines? No laptop has integrated Bluetooth, so I use Bluetooth dongle connected directly to the docking station. So the laptop disconnected will not attempt to use the mouse when using the laptop connected.
  My obvious alternative is to return the mouse and choose one that uses its own (no Bluetooth) wireless dongle. I'd rather not do this if it is not possible to solve this problem.
  Thanks in advance for your help.

  Hey Ross,

  Use the built-in Windows function, it is not possible to pair the mouse with multiple computers. However, you might find some third-party programs that perform the same process. You can search using your favorite search engine.

  Note:  This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Hope this information helps.

• Cannot connect mouse Microsoft Sculpt comfort Bluetooth constantly

  I can't get my mouse Microsoft Sculpt comfort to stay always connected to my laptop (Win7 x 64).

  In the middle of use, it stops working. I studied in the devices & Printers and the device returns is no longer there. I pass by add it a device Wizard, making sure that my mouse is discoverable (green and red lights flash alternately) and he said he's logged and it will look for a driver. The laptop detects a driver and a "Bluetooth Service Configuration" window appears.

  Open Device Manager, I see that HID-compliant mouse is added to the list of mice and other pointing devices. As soon as the "Configuration of Bluetooth Services" window closes, the mouse is removed from the Device Manager and removed from devices & Printers.

  I tried to uninstall and reinstall the Bluetooth driver.

  I tried to turn off the Bluetooth power management feature.

  I tried to change the batteries.

  I tried to move closer and further away.

  I tried browsing the Add Assistant device with Microsoft mouse & keyboard Center installed and uninstalled.

  I restarted at various times during the process.

  What should I try next?

  1. I didn't do any hardware or software changes before this problem I can think
  2. My computer is a Dell Latitude 6430u
  3. I have Kaspersky installed 10.1.2.23 on my computer. It is managed by Active Directory by my IT Department if I can't make changes to it or turn it off somehow.

  Troubleshoot failures in detecting new Bluetooth mouse or keyboard
  -Was not able to finish because I do not have permission to access the registry items in order to remove the bluetooth stack

  I performed a clean restart in any case and I tried to add the device again, and it worked this time.

  I will update this thread if it decides to cut again for some reason any.

  Thank you

  okravetz

• Sculpt Comfort mouse

  I have a comfort sculpt mouse and it worked amazingly 1 month.

  https://www.Microsoft.com/hardware/en-us/p/sculpt-comfort-mouse

  It suddenly started to not recognize my finger when I switched it on tactile browser functionality (previous / next),

  and now it's random answer and activate the function back without even touching.

  I am browsing, but it is suddenly decides to go back on its own...

  This faliure continued even after the touch features have been disabled by using the keyboard and the mouse Center.

  is anyone know something about this phenomenon?

  Hello

  Thanks for posting your query on the Microsoft Community.

  I suggest you refer to the below the Microsoft Help article:

  How can I use my touch mouse sculpt?

  http://www.Microsoft.com/hardware/en-us/help/support/how-to/mouse/use-sculpt-touch-mouse

  Also, try the procedure described in the following Microsoft article and check.

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/mouse/wireless-Bluetooth

  I suggest you to refer to the troubleshooting section on here -http://www.microsoft.com/hardware/en-us/support/troubleshooting

  If nothing helps then contact the material from Microsoft supports the link below:

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Back to us for problems with Windows. We will be happy to help you.

• can not find how to run Sculpt comfort mouse on Windows 7, no option bluetooth not found

  I'm running in circles.  Control Panel does not appear to have a bluetooth option.

  Try to find the drivers to download?  thought this would be a wink

  Hello

  Thank you for giving us the opportunity to help you on the forum.

  I want to suggest to go through the link provided below where you can get the drivers, tutorial in PDF format and all important information about the comfort mouse sculpt.

  http://www.Microsoft.com/hardware/en-us/d/sculpt-comfort-mouse

  Note: Make sure that you download the correct version of the drivers from the links provided. If it's 32-bit then you must download the same version, or if you have 64 -bit , you will need to download the same.

  Try to follow the steps given in the following link to check what version of the operating system that you are using.

  My PC running the 32-bit version or 64-bit Windows?

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows.

  Kind regards.

• Unable to connect Microsoft Sculpt Touch Mouse mouse

  I have an Inspion N5030 running Windows 8 with Bluetooth 365 Dell installed chip. Until recently, I could use my chip to connect a Sculpt Touch Bluetooth mouse, but lately, I'm not. When I place the mouse in discovery mode I am able to see the mouse, but when I try to connect to it I get an error that says: "who did not work. Try again and make sure that your mouse is discoverable. "I know that the Bluetooth chip still works as I am able to control my iPhone from the computer. I have all the updates that are installed for my system, including the driver for the Bluetooth card. What could be the problem? What can I do about it?

  I solved. The problem was that the computer was expecting the mouse for a pairing code. Who wouldn't have a keyboard and mouse. You do realize that if you try to pair in desktop mode only.

• Combo sculpt comfort keyboard/mouse Microsoft - mouse problem driver windows 7

  Just bought a new combo desktop Microsoft Sculpt comfort (keyboard and mouse). I have a problem with the mouse in Windows 7.

  This mouse has the button scan blue on the left where you can drag upward or down and click. I have this attached to a Dell E6520 laptop.

  In windows 8 the slide it towards the bottom of the function pulls the top of the list of open windows. In Windows 7, it's the browser's "back" button. I installed the latest microsoft mouse and keyboard software 2.3.

  When I first installed the drive, everything works as expected. Suddenly the button works like the browser's "back" button. A few hours later, or after a reboot slide down begins to open the windows instead. The only way to fix is to uninstall the driver and re install. I tried the USB in USB ports and all are working the same.

  How can I solve this problem? I called Microsoft support and they said to return the system and replace it. It is not a hardware problem and return it will do no good.

  Any help would be useful.

  Thank you

  Hello

  Thanks for posting your query in Microsoft Community.

  For you help I would be grateful if you could answer the following questions:

  1. you did it all change hardware or software to your computer before this problem?

  2. have you contacted Microsoft Hardware Support?

  Try the procedure described in the following Microsoft Help article.

  http://www.Microsoft.com/hardware/en-us/support/troubleshooting

  Note: Select the device with which you are having problem with.

  If the problem persists, contact Microsoft Support Hardware for help. This issue may have caused corruption of any driver files, and then will be able to help with this question.

  Hardware support of Microsoft:

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Hope the helps of information.

• How can I re - mouse Microsoft Sculpt pair Touch (bluetooth)

  Running Windows 7

  My Microsoft Sculpt Touch mouse was exploited and inadvertently pairing button has been pressed.

  Now, I can't get the mouse works!

  Now the pairing button for several seconds and try to discover the Bluetooth mouse is not successful.

  I would appreciate advice on how to get the feature to the mouse.

  Y at - it a reset a driver to do?

  (Moved to programs)

  Hi Jack,

  Thanks for the reply. I really appreciate for the troubleshooting steps you have tried so far. The question you are faced to could be due to corrupted drivers.

  Please answer the following questions:

  1. What is the brand and model of your computer?
  2. Are you able to connect any other Bluetooth device with your computer? (phone or Tablet)

  Please follow the links below and check if the problem is fix.

  Troubleshoot failures in detecting new Bluetooth mouse or keyboard.

  http://support.Microsoft.com/kb/811805

  Registry warning:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows?

  Bluetooth devices do not work correctly on a computer that is running Windows 7.

  http://support.Microsoft.com/kb/980396

  Add a Bluetooth device or other wireless or network device: frequently asked questions.

  Refer (why Windows does not detect the wireless device, I would like to add to my computer?)

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  Additional information:

  Connect to Bluetooth and other wireless or network devices.

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Add a Bluetooth device to your computer.

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Feel free to contact us if you need assistance with this problem.

• Comfort sculpt Bluetooth mouse is not pair with Win7 Pro 64 bit

  Hello

  My mouse Bluetooth Sculpt of comfort is not pair with Win7 Pro 64 bit laptop computer but doesn't have a lot of pairing with my other laptop (Win7 Pro 32-bit).

  To add the device can detect the mouse Bluetooth Sculpt comfort and it installs the driver/s successfully but is not pair will appear in Bluetooth devices that briefly the mouse and keyboard Centre 2.3 64-bit is installed by says no device found.

  If I close and open the Bluetooth, the Bluetooth Sculpt Comfort mouse devices cannot be found.

  Let me repeat that this mouse Bluetooth Sculpt comfort has no trouble matching with my other laptop with Win7 Pro 32-bit.

  Thank you

  Erik

  Erik,

  Thanks for the detailed response. I suggest to visit the computer manufacturer website and install the latest drivers for Bluetooth and check if it makes a difference.

• Microsoft Comfort Mouse Sculpt has stopped working suddenly.

  Hello, my mouse Comfort sculpt stopped working all of a sudden. I wrote my notes in Notepad and after some time when I tried to start the mouse it does not work. Tried to replace the batteries, but of no use. Updating drivers did not help. Sculpt keyboard works very well. I tried on two machines and having the same problem. The blue laser light under the mouse is dead. However, when I turn on the mouse (power on) the blue light flashes for a second. Not sure if it is a hardware problem. I bought this mouse in January 2014 and worked great until today! Help, please.

  Hi Jordan,.

  From the description of the problem, it seems that it's a hardware problem. I would say contact Microsoft hardware support to improve assistance about the issue you are facing with Microsoft Comfort Mouse Sculpt.

  
  

  How to contact Microsoft if you have questions about your hardware device.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  For more information on how to replace or upgrade to Microsoft, hardware software and manual, click on the number below to view the article in the Microsoft Knowledge Base:

  326246 how to replace Microsoft software or hardware, order service packs and upgrades and replace product manuals

  The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  Hope this information helps. If you need help with Windows, let us know and will be happy to help you.

• Microsoft sculpt mouse, or any other technology blue track mouse blue glow on this?

  So I know it's a very stupid question. I am looking to buy a mouse that looks good. And from my point of view, a beautiful design to mouse and some type of conduit, puts some color. For example, like this image - http://prntscr.com/3ksnd2 - I watched some videos of youtube, but as they don't actually have a blue glow on the bottom, which surrounds the mouse and is visible when the mouse is flat on a surface. And if this mouse bluetrack has this kind of glow, then I want to know if microsoft sculpted mouse bluetrack comfort also has this type of glow. (As I said stupid question, but I couldn't find a real answer).

  And say you microsoft sculpt mouse comfort, is a good mouse for games, like the fact also, as a side issue, it is actually also good that microsoft argues your hand. And I already watched sculpt ergonomic mouse, but that is just a little weird. (and I also like the fact that the mouse comfort sculpt has a touchpad).

  Thanks in advance

  Hi Rohit,

  I suggest you to contact Microsoft Hardware Support using the link. Microsoft Hardware is a team dedicated to discuss and answer questions about the material such as the mouse or keyboard.

  How to contact Microsoft if you have questions about your hardware device

  http://www.Microsoft.com/hardware/en-CA/support/contact-us

  Feel free to write us if you encounter problems with Windows.

• Mouse and keyboard Microsoft Wireless Comfort 5050

  Mouse and keyboard Microsoft Wireless Comfort 5050 will work with my MAC

  With due respect, look at the configuration required for the keyboard and the mouse and see if your iMac has the bare. You can find this information by clicking on https://www.microsoft.com/accessories/en-us/products/keyboards/wireless-comfort-Bureau-5050/pp4-00001 #specsColumns - testCarousel

  My guess is Yes, but you were not specific about which iMac you have so I can't say for sure.

• How can I reduce the DPI of my "Microsoft Comfort Mouse 6000"?

  Is this possible? I installed the drivers, but the only thing I can do is the remapping of keys.

  Ok

  First of all, my experience tells me that maybe it's that you have installed the wrong driver. Please can you tell me exactly what that driver you have installed for 'Microsoft Comfort Mouse 6000' and where you got to?

  Second, if this is the correct driver for the Setup programs start menu look.

  Microsoft Web site implies that the latest intellipoint (mouse from Microsoft software/drivers) is probably 8.15...

  http://www.Microsoft.com/hardware/en-us/d/comfort-Mouse-6000

  If this isn't what you have installed and then try and see what happens.

  Please mark this as useful or response if applicable.

  Tricky

• Microsoft Wireless Comfort keyboard 5000 and mouse

  I just bought the Microsoft Wireless Comfort Desktop 5000 keyboard and mouse.  With the help of Visa Ultimate 32 bit.  Battery powered, followed the instructions, but do not connect not not the combine USB.  Use on a Dell laptop.  That both USB ports work with a multitude of other devices, connection ports directly, not through a hub.  Suggestions, anyone? THX.

  Hello

  • Did you try to uninstall and reinstall the keyboard and wireless mouse drivers?

  I'd say contact Microsoft hardware support for assistance.

  http://www.Microsoft.com/hardware/en-us/support