Microsoft solve this centre.will does not work in my windows vista Ultimate edition 32 bit

Similar Questions

• try to do an update and it gives me an error code 80240016 and when i run Microsoft solve this trobuleshooter it does not work and tells me an occure\red error.

  try to do an update and it gives me an error code 80240016 and when i run Microsoft solve this trobuleshooter it does not work and tells me an occure\red error. How can I fix it?

  Hello

  1. what patch did you try?
  2. update you are trying to install?

  Method 1:
  You can follow the steps in troubleshooting this article and check:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:
  You can also try the steps from the link:
  Windows Update, error 80240016
  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.
  http://support.Microsoft.com/kb/957307

  Method 3:
  You can also perform a clean boot, and then try to install and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

• Zoo Tycoon 2; Zookeeper collection does not work on my Windows vista Home Premium 32 bit?

  I just gotton this game and it will not install on my laptop!  The RAM is 3.00 GB.  I just deleted a ton of things so it has avaibible of memory. Each time, it starts to install for a few minutes and then tells me it can not read.  I searched a lot of things online but may not know how!  So, if you have an idea of what I can do please let me know! And also, does anyone know if zoo tycoon complete collection works? Ok thank you.

  Hello

  
  1. What is the full error message you get when you try to install Zoo Tycoon 2: Zookeeper collection?
  2 are you able to install any other games or applications?
  You can read the following article and check if it helps.
  Microsoft games: InstallShield Error Messages
  http://support.Microsoft.com/kb/910816
  See also:
  Articles on Zoo Tycoon 2
  http://support.Microsoft.com/zootycoon2faq
  Zoo Tycoon 2 does not start or you receive an error message: "another instance of startup.exe is already running.
  http://support.Microsoft.com/kb/968309
  For reference:
  Zoo Tycoon 2: minimum system requirements
  http://support.Microsoft.com/kb/889368

• Satellite P200 - 10 c: camera does not work after upgrade to Vista ultimate

  After the full vista upgrade webcam did not work. After some research, I found that I had to change the driver for usb video camera I did.

  Everything works fine now except the snap button of the camera software. Record audio and video works fine. Snapshot button does not work after you have clicked on it. Can someone help me solve this problem too.

  Hello

  you have reinstalled the software of the camera (not only the drivers) that controls the special features snapshot-thing like that?

  It should contribute to reinstall everything because vista is confusing every driver/software maximally... :)
  Would appreciate comments on your success.

  See you soon

• Satellite P205-S6257: Chicony USB Webcam does not work after upgrade to Vista Ultimate

  I've upgraded to Vista Ultimate Home and now my Webcam does not work. When I tried to update the driver, I get a message that says that Windows has encountered a problem installing the software driver for your device...

  The installation file forthis training device is missing a necessary entry. Maybe it's because the file INF was written for Windows 95 or later. Contact your hardware vendor.

  I succumbed to find the drivers on the Chicony website. My laptop is a Satellite P205-S6257 and the Toshiba is not yet display on their support site. I don't have a disk for webcam.

  Any suggestions?

  I wish more users would use the advanced search for the Toshiba forum because many topics have already been discussed here and the solution was already planned.

  Check this box:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24169&MessageID=88745

  or this thread
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24868&MessageID=91172

  In the thread above, you will find a link to this page in the solution:

  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=UK&from=search_service_options&FID = TIU00000038fc

  I hope I could help

• 200 M from Toshiba does not work with 10W connected/Vista Home Basic 32-bit

  Dear Sir

  I m having a problem with my Toshiba M200 laptop, it shows no text display or clear blue/green screen or different models with the connected 10W. But it does not work with the battery. Afer complete the system startup and normal screen if I connect the power 10W then works perfctly ok. The same procedure should be followed evertime I use my laptop.

  Can someone guide me weather it is a hardware problem or software related problem?

  Dipak Chowdhury

  Hello

  Have you checked with a different AC adapter?

  This seems to be a hardware problem.  You will need to contact the manufacturer of your computer to be able to find a solution to this problem.

  http://forums.Toshiba.com/

• Update of Flash Player does not work on my Windows Vista / IE 9

  I have problems with the update of Adobe Flash Player. The player is installed and recognizes that an update is available. I select to download and install the update and an internet window explore opens and I am given the opportunity to click on the "Download Now" button However once, I doesn't screen for some time for a progress bar called "Step 1 of 3" and "Initialization" which becomes "step 2 of 3" which shows "If you encounter any issues download Adobe Flash Player, click here." but never does anything else. "» When I take advantage of the option 'click here' or the 'need help?' fast in the upper right corner, I get a different overlay screen showing the following. The problem is that I get all the guests below. It's as if the download never started. And without the instructions below are not really apearing and comes to hide behind another open window on my screen. It seems to me that the download and update functions are broken. The same thing happens if I go directly to the ADOBE site and try to run the install or update directly from there. If anyone can help with this?

  1.

  When the file download dialog box appears, click run.  Security analysis will run automatically.

  

  

  2.

  When the user account control dialog box appears, click Yes.

  

  Note : If you are unable to download Adobe Flash Player, click your browser's back button. Click install/download now , and then select Saveand run.

  John,

  I don't know that Maria will answer before Monday.

  You say that you try to go to the Adobe site and it downloads yet.

  Have you tried:

  1 restart your computer to stop any Adobe processes that can run.

  2. go in the Adobe site. Descend to the bottom where it says, "still of the problems? Click on the link for Internet Explorer.

  Installation problems | Flash Player | Windows

  If this does not work, maybe someone has a suggestion.

• Why aac audio does not work in PowerProducer Windows Vista 32-bit?

  My friend has a Blu - Ray burner that is packed with PowerProducer 5. They have installed on their PC 32-bit of Windows Vista. Its HD files AAC audio camera mp4 video. The audio does not work in the environment creation of PP, or burned discs. I downloaded all the codecs. The audio works fine in WMP and QT, as well as in Windows Movie Maker. Installed the same software on my Windows 7 computer and audio works very well.

  I have contacted Cyberlink, makers of PowerProducer, and they said that the limited packaged version of the software does not support the AAC. They suggested that upgrade to the full version for $50. Obviously, I'm not quite confident in this response.
  Someone has an idea of what might be past or have suggestions of what to try to fix the error?

  Hi ClintWatson,

  Because the problem is specific to this particular application, I suggest you to contact CyberLink support for better support.
  http://Forum.CyberLink.com/Forum/forums/show/3.page

• Quick Books 2008 pro does not work on my windows Vista

  Why my Quick Books pro 2008 not working correctly on my windows Vista?

  You can visit the following Intuit post:
  http://community.Intuit.com/posts/setting-default-sales-receipt-multiple-templates

  If this does not help, then you must contact QuickBooks support.
  There have been problems with QuickBooks does not print PDF so that files may be a similar problem.

  You can post in the following QuickBooks community forums.
  http://community.Intuit.com/category/printing-in-QuickBooks

  Sincerely,

  Marilyn

• LEGO chess game does not work on my windows vista computer. It ran fine on windows XP. What should I do?

  LEGO chess game loaded without problem on windows vista, but whenever my son trying to play, it says: "Please insert the legochess CD-ROM into the CD drive.  The disc is already but it just repeats the message?

  PS: I am a shareholder of Microsoft and so disappointed with Vista.  Give me XP!

  Try this link. There is a patch to correct this problem by the creators of this software.

  http://support.Selectsoft.com/products/L/LNLEGCHESJ.htm
  (Copied from above link)

  Question	I try to run the program, but a message "insert disk" always comes to the top. The software seems to be installed correctly.
  Description
  Solution	We have a patch for the failures of Lego that should solve the problem of "no CD in the drive". It is currently available for download on our site here: chesscdfix.exe

• Equium A200-1AC - Hotkey Utility does not work on the Windows XP Home edition platform

  Why fail HOTKEYS Utility 0.49.2.1C on Windows XP platform?
  Please help me!

  Hello

  already tried this address:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  If so, then try the Canadian site, they sometimes pilots who aren´t on the European site:

  http://209.167.114.38/support/download/ln_byModel.asp

  Otherwise give some feedback so that we can find another solution...

  See you soon

• explore my internet does not work, please tell me how to solve this problem, it does not connect to internet

  explore my internet does not work, please tell me how to solve this problem, it does not connect to the internet while I have internet and other things could be used

  Hello

  Can you tell us more? What is the model of the unit? Do you have the same problem when using other browsers?

  Maybe you should just clear the cache or delete cookies? Try this link here.

  I hope that helps!

• I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

  My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Is anyone know how can I access my hard drive again?

  Thank you

  Hello

  You has made changes to the system before the error appearing?  Cancel the changes.

  (1) in Device Manager > right click on the driver, and then select uninstall

  Reboot and Windows will reload the driver

  (2) remove the upper & lower filters that cause errors in Code 31

  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

  Access the manufacturer's Web site and search for updated driver

• This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.

  Jake

  Hey Jake,

  Follow these methods.

  Method 1: Follow these steps:

  (a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.

  (b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.

  (c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:

  Remove or reconfigure newly installed unit.

  Restore a version prior to updating the driver.

  Use system restore to undo the Device Manager recent related changes.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  (d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Update the latest graphic drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.

  Thanx

  Hi rui2010,

   

  Place your machine in a clean boot State to see if another application is in conflict with the modem.

  If this fails, I recommend you reach out to the community Hauwei for assistance:

  http://Forum.Huawei.com/jive4/Forum.jspa?forumid=46&orderStr=9

   

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]