Microsoft Teredo Tunneling adapter device"does not work correctly.

Similar Questions

• My DVD player does not work and all the information I can find is "this device does not work correctly.

  Hi, I have Windows Vista and I use a computer laptop Dell studio. When I insert a disc into my CD/DVD drive, the drive spins and it looks like it is about to start and makes the same noise start several times and then just stops. My computer does not record that there is a disc there. If I double click on the DVD drive in 'My computer' it ejects my disc and says "insert the disc in drive E".

  I went on the 'repair' Microsoft online scanner and it told me that there is a problem, but he can fix it. In Device Manager, under CD/DVD-ROM readers I have Optiarc DVD +-RW AD - 7640S. Under device status - general - properties, it says "this device does not work correctly. He also says that I have the updated driver.

  I even uninstalled the driver as a last resort and then restarted my computer. It reinstalled the driver for me, but there was no change. Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
  entries that do not fix the resolution of problems and those who "could" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
  There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
  Parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Webcam USB 2.0 on my laptop with windows vista error device does not work correctly

  Original title:

  I just plugged a usb2.0 webcam on my laptop with windows vista. It is loaded ok, but the device manager says that the device does not work correctly. Any ideas please.

  I just got a webcam via ebay and plugged into my laptop. I'm working on windows vista. He finds and load device software right away, no problem. But I can't work. go into my device manager it tells me that the device does not work correctly. Any ideas please.

  Hi Matthew,

  The first thing I would try is to connect the webcam to another computer to make sure that the webcam is not defective.

  Now, check out these links and return to the State of the question.

  When hardware installed in or attached to a computer doesn't work properly, it is often because of a driver problem.

  Here are a few common problems with drivers and the means to solve them.

  See the following link for more information:

  Tips for solving common driver problems

  Also check out the following link and run the fixit available.

  Hardware devices do not work or are not detected in Windows

  The fixit diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.

• Equium P300-16 t - Synaptics Pointing Device does not work correctly

  I hope someone can help.

  Just bought this laptop and for some reason, I get an error message come saying the Synaptics Pointing Device does not work properly. The touchpad loses some functions and a warning appears informing me of this. I can still use it, but disappears from the icon in the taskbar with the flashing blue dot - when I go into the control panel it says the driver and he asks if I installed another ps/2 pointing device driver

  Looking forward to any help you can give.

  Suggest that you reinstall simply touch pad drivers. Maybe new version?
  So, just uninstall drivers, restart your computer, reinstall the drivers.

  Drivers are located on the download page of European drivers.

• HARD drive external "this device does not work correctly"Code 10"

  Original title: it does not recognize the external HARD drive. (Convert HDD mobile external HARD drive)

  I have a Sata Drive en-plus close card I bought, I successfully installed the HARD drive and plugged (supposed to be taken & play), it does not recognize the HARD drive and I tried the computer management and replacement of INF. USB but still does not. Also, has problems. Drive HARD Toshiba satellite came 500 GB Fujitsu HDD.

  The point of this is to clean up the cause of the car, there an OPS on it, but I have not anymore!

  Need help please!

  Hello

  Method 1:

  See the link and check if it helps:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  Method 2:

  Check the link and try to run the Microsoft Fix it:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• TEREDO TUNNELING PSEUDO-INTERFACE DEVICE DOES NOT WORK CORRECTLY - ACCORDING TO AVG PC TUNE UP

  My laptop is a HP G7030EA - MS Windows Vista Home Basic 32-bit SP2 Intel Pentium Dual CPU T2330 @ 1.60 GHz, 1.0 GB RAM, Mobile Intel 965 Express Chipset Family, bought new in February 2008.  I have not changed any hardware, software, etc.  I do not use it for games, only for things such as e-mails and visit websites

  Until last month when my desktop computer broke, I used the laptop only occasionally as a backup of the computer.  It never quite worked and seems to be unable to handle several tasks at once, often taking minutes for Google to load.  When I get impatient and click the mouse too much I heard a horrible noise and the screen mouse cursor freeze for a minute or two.

  As the laptop has become my main computer at the moment, I downloaded AVG PC Tune Up to see if it would improve it performance has not helped.  I was surprised to see how much memory the AVG2013 anti virus program uses, but wonder if the speed of connection and freezing problems I experience result (AVG Tune Up conclusions on) the Teredo Tunneling pseudo-interface unit does not properly.

  I follow AVG on screen re boards: looking for a software driver update but none was found, and I got the message "the best driver for your device software is already installed.  Windows has determined that the driver software for your device is up-to-date, Tun Miniport, Microsoft Map.

  This left me confused.  If there is a problem with this device, no solution seems to exist.

  Any help that will allow my laptop to function normally is welcome.

  I understand that you want to know if the teredo adapter can cause performance problems.

  The teredo adapter should not cause performance problems.  It is really just used to allow devices work IPv4 with IPv6 Internet service provider.  If the ISP was using IPv6 and your system did not have the adapter teredo, so it wouldn't work properly with the service provider.  For now, IPv6 is a significant minority that the world continues to work on IPv4 as not all networks, Internet service providers, and businesses are not entirely passed to IPv6.

  This thread on the Microsoft forums goes into a little more detail about the adapter teredo including how to disable it so that you only see it in Device Manager.  Unless you are using IPv6, this shouldn't really be a problem.

  If you start in safe mode, the performance problem persists?  Turn on the computer and press F8 once per second for the Mode option, safe mode with networking.  This will help you to further isolate the performance problem.

  Furthermore, does this happen that the adapter is connected or not?

• My instant HDTVPCI ADSI device does not work correctly.

  As I said earlier, my instant ADSI HDTVPCI device is not operational, and Device Manager cannot start or reset for me. Please help me to fix this problem, thanks. William Schotts.

  Hello

  Follow these methods and check if that helps:

  Method 1:

  Try running the fixit from the link give below and check if this can help:

  Hardware devices not detected or does not

  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2:

  If the drivers are not installed automatically install use the software that came with the hard disk and install the drivers and software. Refer to this article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• HL-DT-ST DVDRAM GT32N SCSI CdRom Device does not work correctly

  Hello

  I have this unit in my ASUS laptop: HL-DT-ST DVDRAM GT32N SCSI CdRom Device,.

  and it is not read most of the inserted discs. Prints are better, but is not able to read one of my CDs or DVDs written at home.

  A few years ago I tried to solve the problem and that I can remember other users had the same problem and the driver update has been recommended, but I also discovered that the support for this product is complete, and I couldn't find all the archives. I dropped.

  Now I'm able to download a driver is already installed on the computer that has the version number: 6.1.7600.16385.

  I suppose that there could be problems other than the driver himself.

  Help, please!

  Hello

  Try to clean the disc with a cleaning disc.

  If cleaning doesn't help not the drive has a hardware problem, since it corresponds sporadically.
  For discs do you you try to use the format of the ISO image.

  Should which CD or DVD format I use?
  http://Windows.Microsoft.com/en-us/Windows7/which-CD-or-DVD-format-should-I-use

  =====================

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://Club.myce.com/F61/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Microsoft Teredo Tunneling adapter, can not start correctly

  When I run my health system monthly report the resource and performance monitor told me that;

  A device has a configuration problem that prevents it from starting correctly.

  Details:

  The device, Microsoft Teredo Tunneling adapter, cannot start properly. It was perhaps not the right driver installed or may be experiencing a hardware failure. The Plug and Play ID for the device is 9. ****************************************** In Device Manager the driver shows up to date, but said the properties; This device cannot start. (Code 10) Since the report the resource and performance monitor says it's a plug-and-play I uninstalled it but there is nothing when you restart and I had to find and reinstall.  Of course everything that fact was put me where I started. How can I solve this problem?

  Hello

  Thanks for posting your query in Microsoft Community.
   
  I understand that you have problems with the installation of the Microsoft Teredo Tunneling adapter device drivers.
   
  Method 1: First of all, try to follow the steps mentioned in the link below to fix the problem.
   
  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows
  http://support.Microsoft.com/kb/943104/en-us
   
  Warning for the registry:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
   
  Registry backup
  http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7
  
   
  I hope this helps. Otherwise, answer this answer and we will be happy to help you again.
   
  Thank you

• Microsoft Teredo Tunneling adapter does not work on my Windows 7 and cannot start. The Plug and Play ID for the device is 12.

  Anyone can guide me please by reinstalling my Microsoft Teredo Tunneling adapter for my Windows 7 operating system?  I ran a diagnosis of the system and says it can not start correctly and has a hardware failure. The Plug and Play ID for the device is 12.  I have problems to install it.

  Hello

  Try these solutions:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/how-do-i-reinstall-Teredo-tunneling-win-7/10ff26a2-fc53-4CDE-AE4C-3cd35f15e2e2

  How do I reinstall Teredo

• Microsoft Teredo Tunneling adapter does not work correctly and my pc works too slowly to start and stop.

  Original title: hardware device

  Please help me...

  My Microsoft Teredo Tunneling adapter does not work correctly... I tried to reinstall it but it is impossible to install...

  So what to do so adpter may work correctly...

  And my pc runs too slowly (at startup and shutdown also)

  Help help me soon...

  Thank you...

  Hi Harshhh36,

  Usually, after the computer restarts, the drivers install automatically and it will stop the errors.

  You can also refer to the computer or the network card manufacturer's Web site to download and install the latest version of the drivers for the network card.

  You can also check in the updates of windows updates available for the network adapter driver.

  For more information, see the article:

  Automatically get recommended drivers and updates for your hardware

• Microsoft Teredo Tunneling adapter does not work.

  Original title: Microsoft Teredo Tunneling adapter

  I think I'm ready for questions on the Teredo in the forums.  I tried these "FixIt", and nothing works.  It w/b well if Microsoft had a site to find this Teredo so that we can download a 'new '.  The defective one I have on my desk is dated 2006.  Really frustrating to continue in these wild pursuits to find a 'solution' to the Teredo Tunneling adapter.

  Alice

  Hi Alice,.

  Thank you for posting your query on the Microsoft Community.

  I understand that you have a problem with Microsoft Teredo Tunneling adapter. I will help you solve the problem.

  Before we continue, we need more information to help you better.

  1. Did you change to the computer?
  2. Do you get any error messages when you try to use Microsoft Teredo Tunneling adapter?
  3. Have you installed a third-party software on your computer?

  As you have tried some troubleshooting steps, I suggest you disable third-party security software installed on your computer (if there is) temporarily and update a hardware driver that is not working properly.

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Turn off the Antivirus:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I suggest you check suggestions provided by Nithyananda J from the following link to see if it can help solve the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Microsoft-Teredo-tunneling-adapter-driver-download/d7efb977-b3ed-4373-A292-b6261faeb72d

  I hope the above information helps. Please let us know if you need help with Windows. We are happy to help you.

  Thank you.

• driver problem on teredo tunneling adapter device Microsoft

  The message is that a driver problem has been detected on Microsoft device adapter tunnelling teredo, reinstall the driver. to try to reinstall the driver, I get the message "this device cannot start [code 10]."

  I have Windows 7 home premium, any suggestion would be appreciated.

  You have a "HP"?

  If so, this may be of interest: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Microsoft-Teredo-Tunneling-Adapter-Code-10/td-p/4204314

  Or see this thread for common solutions: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/troubleshooting-sony-vaio-windows-7-computer/177ed59b-028f-432a-b451-7c52e1ce6b6c

  Quote:

  The most common resolution is to update the drivers associated with the device. To do this, follow these steps:

  a. in the device properties dialog box, click the driver tab.

  b. click put to update driver to start the Upgrade Wizard to update the material.

  c. follow the instructions to update the driver.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Note: You may be prompted to provide the path of the driver. Windows may have the built-in driver, or the driver files can always be installed since the last time that you have configured the device. If you are prompted for the driver and you don't have it, you can try to download the latest driver on the manufacturer's Web site.

  Discussions:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Microsoft-Teredo-tunneling-adaptor-not-working/085a88bb-16cc-4E30-A4D6-ac987038a648

  Associated content

  • Microsoft Teredo Tunneling adapter does not (the device cannot start)...
  • Microsoft Teredo Tunneling adapter does not
  • Teredo tunnel card no working__
  • Microsoft Teredo Tunneling adapter does not...?
  • Microsoft Teredo Tunneling adapter works does not properly, computer...

• Microsoft Teredo Tunneling adapter not displayed in the window of adding hardware under common hardware Types.

  I have a HP Pavilion P6 desktop computer running Windows7 and in devices and printers , I noticed that my computer has a yellow triangle that relates to Microsoft Teredo Tunneling adapter.  To address this issue, I note that this device is not displayed in the window of adding hardware under common hardware Types, but I listed it in the Device Manager.

  I tried several attempts to reinstal, but not joy.  Can anyone suggest how I can restore this device?

  In the Properties window, it shows a Code 10.  This device cannot start.

  DM

  Tunneling is required only if you have a printer that requires it.  Here is how to re - install if you do

  It is a known problem if you have Zone alarm installed.  If you have installed remove it at least to check

  To disable Teredo tunneling 6to4 interface open an elevated command prompt and type

  netsh interface set terredo disabled state.

  To re - install

  Click on start. Type Device Manager in the start search box, and then open it. Click the Action tab on top and click Add legacy hardware then click next and next again, he will then scan and find nothing then click on the screen after that. Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it. To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices. If there is no option "Add Hardware inherited", you need to connect the unit using the tunneling.

• Microsoft Teredo Tunneling adapter - not fixed

  It is a question about Windows 8. Sometimes my speakers work, sometimes they did not. There is a problem with Microsoft Teredo Tunneling adapter of the Windows Troubleshooter could not fix, a white cross in a red circle is present in front of her. "In addition, it is written detected and a yellow exclamation is present in front of" ""hardware changes might not have been detected '. Kindly help soon.

  Dell Inspiron 15 (3542) with 64-bit Windows 8

  1 are you getting the latest drivers from here?
  2. you are in fact running Windows 8.1, correct?

  3. your BIOS is up to date (same link as above)?

  Get the drivers downloaded/saved on your computer in a place you can easily find and you know what each of them is (be it by folder or file names) and (restart the computer as requested/required - I suggest simply do after each individual installation if requested or not)...

  Install the Intel Chipset driver.

  Install the Intel Management Engine Interface driver.

  Install the Intel Rapid Storage Technology driver.

  Install the Realtek card reader driver.

  Install the appropriate driver:

  .

  Intel HD Graphics Driver.

  Install the appropriate network driver:

  RTL8106E-US & RTL8111G-US Realtek Ethernet controller driver.

  and

  Dell 1704 WiFi + Bluetooth Driver Wireless.

  or

  Dell Wireless 1705 WiFi + Bluetooth Driver.

  and

  Dell driver switch to airplane Mode.

  Install the Audio driver from Realtek ALC3223 high definition (HD).

  Install the Dell Touchpad driver.

  Come back and let us know how these facilities go!