Microsoft users can not find me on the network

Similar Questions

• When I update my device I need to have the apple ID and I can not find and contact the owner of the first.

  Hello;

  I can't find the original owner of my camera.

  I can't have my Apple device Id. When I update my device I need to have the apple ID and I can not find and contact the owner of the first. And I have a lot of problem with this matter.please help me. Please unlock my device to activate locking Mode.Or maybe if I have the Apple Id for my camera I found the password.

  My phone number is:

  IMEI:

  *********

  ICCID:

  ********

  Serial No.:

  F2 * FFK

  Part number:

  ME300LL/A

  Please, please, please help me.

  best regards;

  Siavash

  
  

  < personal information under the direction of the host >
  

  Only the owner of the unit can remove locking activation. If you have the original receipt, you can try to take it to an Apple Store and ask them to do, otherwise return the unit to the person to whom it was purchased for a refund.

• I can not find, select, install the appropriate SR2 extended RAW for Phtoshop CS6 file to use with my Canon 5DSR camera... Please help

  I can not find, select, install the appropriate SR2 extended RAW for Phtoshop CS6 file to use with my Canon 5DSR camera... Please help

  Hi drdrum,

  Greetings!

  Update the software of camera raw as Canon 5DSR is supported camera raw version 9.0 and above.

  Here is the download link: https://helpx.adobe.com/x-productkb/multi/update-error-u43m1d204.html

  Also, here is the list that displays the camera with respective camera raw support:https://helpx.adobe.com/camera-raw/kb/camera-raw-plug-supported-cameras.html

  Concerning

  Jitendra

• Cannot complete the home network implementation to include this computer as it can not be seen on the network.

  Original title: How can I remove a unidentified firewall running also apparently in Windows Firewall?

  Under Windows XP with the Windows Firewall and any other firewall unidentified. Cannot complete the home network implementation to include this computer as it can not be seen on the network. Able to ping outgoing to other computers in a network, but not able to ping inbound from other machines.

  Hello

  1. what makes you think that there are unidentified, firewalls running on the computer?
  2. what exactly happens when you try the home network configuration? You receive an error message?
  3. what exactly happens when you try to ping any computer on the network? Error message?
  4. what operating system is running on this computer? Also after return from the edition of these operating systems?

  See the following articles that might help you.
  How to troubleshoot a network home in Windows XP
  http://support.Microsoft.com/kb/308007

  5 steps: how to set up your network wireless home
  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

• None of the links in my table of contents or INDEX works. Can not find file is the error message.

  The files on a network drive. Win7. FM 8. I renamed the files. Regenerated. Created a new book. Nothing works.

  I have no dashes and underscores in file names, but no other special character.

  Need for emergency assistance.

  The error message is:

  Can not find the file named

  \SOL\Data\TechDocs\DRAFT\Shiva\OperatorManual\096-0461-001C-1.

  FM.

  Make sure that the file exists.

  ______________

  Note that the table of contents and INDEX are listed in the book without a path while the chapter of body is the entire path (above) in the book view.

  Thank you

  IIRC, FM8 had a problem with a path with no subfolders 5 (or 6?). Try to put files up to a few levels or create a mapped network drive down to the lower levels.

• OfficeJet 4500 Wireless - MacBook it installs with USB, but can't find it on the network

  Help! I just bought a new MacBook (OS 10.6.4) and try to use the HP Officejet 4500 Wireless with it. I bought the printer a month or two ago and it has been implemented on my wireless (a Netgear - WNR2000 router) and works very well with my old iBook G4 and the Windows PC at home. My new MacBook is connected to the fine of the Internet, but when I went to use the printer, it seems to install ok, make settings IP etc. of the printer on the network, but it's not far past. He says that the printer is "unreachable" or some such nonsense and refuses to see it on the network. I tried both with and without the CD installation, and after you have uninstalled the software HP to uninstall and reinstall in the system of preferences--> Print and Fax settings. But he only sees the printer if I connect it with USB, which goes against the reason for which I bought it.

  I ran the software update and it has found a new version of the software to download to the printer when connected via USB. But there seems to be no way to convince him to find the printer on our network wireless

  Any ideas?

  -Mary

  Wow - I solved the problem. How ridiculous of a solution is that?

  I saw a mention on another Board need to have a SSID for the network of less than 6 characters/letters to get the Mac to work with some other printer/router configuration.

  So I tried here - since I had a network SSID of 7 letters.

  (1) I went in my screen to config the router and changed my SSID to one that was only four letters. I also took the static IP address for the printer, I had just set up (so for those of you watching at home, ignore my comment on this tactic, it was a herring!) leave the settings as they were before I ate with it.

  (2) I then restarted the router, the computer and the printer.

  (3) I first put in place the new SSID on Mac (change the SSID of the router to the old password only left, so it was just a matter of returning the password on Mac, when it entered into the 'new' network). I checked this by seeing in screen config the router if the Netgear now he showed in his list of connected devices (it wasn't before, and I was suspicious that he was some other weird problem, if the Mac has used the Internet very well). He did it!

  (4) then I used the front panel of the printer to go into Options--> Menu Wireless--> Setup Wizard and configure the printer again on the new name of the network SSID. Then I went to the Options--> Print the report--> Config network. It would therefore be to print a page giving the State of the connection confirming that it was the network.

  (5) then I went back for the Mac and use it again the screen of the router config I confirmed that now the printer was also showing up on top of the screen of connected devices (it wasn't before, now she and Mac have been listed!). Then I opened system--> print and fax preferences and tried to add the printer again. This time he finds immediately on the network (using the so-called Hello?), and since I already had the software update (using the steps suggested above) that she already had the correct printer software to use. Wireless printing fine now... After all this noise.

  So, apparently, PrintDoc, you need to add a small little by this spiel you gave me above - to install a printer wireless on a new Mac with a working wireless network (at least one with a Netgear WNR2000 router), the SSID of the network should really be only a couple of long letters (4A worked in this case but not 7). Why, I have no idea. Ridiculous, like I said.

  Thanks anyway.

  I hope this discovery helps someone else too!

  -Mary

• I just load windows 8 and all my office applications have disappeared. even can not find them in the list of programs, I am retired and was a dealer of microsoft my laptop had all about it at the office.

  my laptop is a sony viao. I have the personal documents but outlook, word, access, etc are all gone, I can t even find them on the c drive.

  my laptop is a sony viao. I have the personal documents but outlook, word, access, etc are all gone, I can t even find them on the c drive.

  I was in windows 7

  Assuming that you have chosen not to keep your programs and your files (it certainly seems like that) - then you will need to install Microsoft Office from your installation media using your product key.
   
  

• At the login page, our administrator is the user can't find anywhere and the connection we have is a standard user. How can I get an active Admin in the standard user user?

  We tried to implement the standard user to have limited access to the computer so that when we have people over, now, I can't able to carry anything as an admin if I right click on the menu on the icons. I am also unable to install new programs. The console command does not work for me to do that either, net user administrator / Active: Yes, just gives me an error code.

  No luck. I tried to start in safe mode. The computer turns off automatically, and I had to make a fix to start. I now think I need to do a full reset, but did not have my vista copy from when I bought this computer. Is there a way to get a new copy without having to buy a new set of software?

  Call the manufacturer of your computer. Request a set of recovery disks. Total cost is minimal, and it's a set that you should / must have.

  The set allows to restore your computer.

  Sure, if you are able to back up files that you want to keep before launching the recovery disks.

• Computer not finding printer on the network

  I have an OfficeJet Pro 8600 Plus with a wireless connection to my home network, E2000 Cisco router. I have install the printer using the software that comes with it. Everything worked fine for several months, but recently, I found that my network computers are randomly impossible to locate the printer on the network. I am also unable randomly ePrint. I noticed that if I power cycle the router, the computer will then find the printer. Now, I am regularly power cycling the router. Should not have these problems, I don't know even where to start asking questions. I'm not having other problems with the router. I connect to the internet OK, see the other computers on the network OK, just could not find the printer. There are usually 3 different computers that are enabled and disabled the network throughout the day (sometimes using the printer, sometimes not).

  What are some of the common issues that could cause this problem? Any suggestions to make the connection to the most reliable printer?

  Hi there, your PC into hibernation should not make a difference but some common router settings to watch out include:

  •Wireless isolation is enabled (won't let not peripheral connected wireless to talk with each other)

• I've just updated to the version of thunderbird 38.2.0 and can not find or access the calendar. SOLVED manually install the calendar

  I use windows 7 64-bit.
  I used the add-on of the calendar in the previous versions.

  You can install Flash via Tools | Modules. If it is already there, make sure it is up-to-date and if not, update. If it is not checked, select it.

  We seem to have a few wrinkles at the present time. While the calendar is now available in an automatic and eventually installed download for new users, we see reports of established users who have disabled the calendar to find the reactivation of himself and you come from the other direction; you want the lightning, but he does not appear to have been offered.

  Basically, it is still an add-on and can be added, enabled, disabled and removed just like any other add-on.

• How can I reset my administrator password, I'm a standard user, can not enter in all the files that I forgot my password? __

  I can't get into my files I want to have changed, but have forgotten my administrator password, I can't in one of them I want to have changed because I need my password that I forgot. My setup is standard, which I changed to be a Director, now I don't have access to what my settings changed... because I don't remember my password. Please help, because it causes a lot of hassle for me & my computer that I would like to reset my setting standard user to administrator, so I can have access to many of my files & change my settings when I need to... I would like to change my standard to be an administrator user account. I can't reset my administrator password because I forgot it! Help, please...

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  See you soon. Mick Murphy - Microsoft partner

• HyperTerminal can not open COM16 while Device Manager displays COM16. Process Explorer can not find COM16 or the other.

  On my laptop in docking station, I used hyperterminal to display incoming data through COM16.

  After departure, using stand-alone laptop computer and reconnect again, COM16 cannot open Hyperterminal again. Not even when the laptop is completely stopped and started again.

  Device Manager displays COM16, but trial Explorer cannot find either.

  Disconnecting and reconnecting the USB-RS232 port are detected by Device Manager.

  How to solve this problem?

  Windows does no accounting of the com ports?

  Concerning

  Hello Michiel,

  Thanks for posting your question on the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.

  TechNet Forum

  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you

• BlackBerry smartphones can not find pictures during the transfer to computer

  I have these settings on my storm. WE map media. PSG ON. MSM ON. Automatic YES MSM. When I use the software on my computer to transfer my photos from Roxio, in my view, nothing happens and I get an error message. When I look at the map support when it is connected to my computer, all I see is the music files I have loaded on it. I have more than 50 pictures that I want to move my lap top. Anyone has any ideas. Also after a photo is broken and loaded on the storm and when your research in this field and zoom in for a close can save you the fence up to as a separate peak. Thank you very much Mike

  stltrains wrote:
  When I look at the map support when it is connected to my computer, all I see is the music files I have loaded on it. I have more than 50 pictures that I want to move my lap top. Anyone has any ideas.

  Talk to your computer, close Desktop Manager and Roxio.

  On your PC, open my computer > and choose one of the removable drives, could be named 'BlackBerry' on readers, E, F, G or H, more common. Explore here to BlackBerry > user > pictures.

  ^^ Your path above could vary.

• You will need to disable a computer. Can not find disable in the help section

  You can use PSE 13 on another computer. In the old computer in Photoshop elements 13, in the upper left corner, help,does not show an off button. What to do?

  davidp67511823 wrote:

  Hello.  In the same menu help, nor is it a logout option. What should do?

  You are in the editor or organizer?

  Are you on Windows or Mac, which version?

• Syntax error in DW... can not find out what the problem

  Hello

  I seem to have a problem in adding a new slide show on the JQuery slider.  I took pictures of the code.  First picture shows the code #slideshow 1-7.  It is the way it is when I went back to work and they work.  also there no syntax error in DW when I open this page:

  

  I also wanted to show you the lower part of this script, so you can see the code before I edited it.  Here it is:

  

  Then, I have now added #slideshow8 and so far so good - no errors:

  

  This is where, I add the lower part of the code for slide show 8 and it seems to imitate all of those above (7, 6, etc.).  However, DW says I have an error on line 139.  Here is what I added:

  

  Don't forget that as I type all right, while I type even more, the error lights (error of the line 139).  also I do not add any code to the bottom in this section:

  

  Also after that I added the code, all slideshows stop working (from 1 to 8).  So I am really confused and hoping someone can help what is the problem.  Remember, I just took this job so all this code on the page you see was done by the person in front of me.  Don't say that I'm a great coder myself not but just wanted to report it.  If you want to see live page without my code, you can go to the link below.

  http://www.darrp.NOAA.gov/archives

  Please help me.  Thank you.

  The end of the script should look like this...

  $("#slideshow8_a").each (function () {}

  If ($(this) .is (": hidden")) {}

  }
  else {}
  Title var = $(this) .attr ("title");
  $('#title8').html (title);
  }
  });
        }
  });

  It lacks the "BOLD" above, the second series of your wrong version...

  }

  });