Microsoft Windows server 2008 R2 product key

Similar Questions

• Cannot import Microsoft Windows Server 2008 R2 with Hyper-V virtual machines to VMware ESXi 4.

  Hi team,

  I use VMware vCenter Converter Standalone to import certain Microsoft Windows Server 2008 R2 with Hyper-V virtual machines to VMware ESXi 4, using another Windows Server 2008 R2 as the machine Agent Converter. Well, the agent connects to the Windows VM source very well (I used the net use command to create a line of conduct...), perhaps no chance to connect to the computer target VMware ESxi 4 and make the converter doesn't work...

  Following is the error message:

  "Unable to connect to the host specified" from the converter agent machine. " It is perhaps because the host is not available on the network, there is a problem with the network configuration or management on this host services do not react. Check all components of converter to be able to connect.

  So, my question is; is it possible to create a work around (like the net use Windows command above) to make possible the connection of the converter Agent on Linux VMware ESXi 4 machine Windows machine, to directly import the virtual machines of Windows Hyper-V to Linux VMware?

  Thanks in advance,

  It's even easier than that

  Use this: http://www.winimage.com/

  Which will convert *.vhd *.vmdk, so you don't need to do all this... Of course, another way is to start the machines, leaving them on Hyper-V and go through the network and process virtual machine as physical machines and do a P2V on the network...

• E-business Suite Release 12 certified with Microsoft Windows Server 2008 R2

  News :)
  
  now R12 certified with Microsoft Windows Server 2008 R2 x 64 bit.
  
  You can find more details here...
  
  http://blogs.Oracle.com/stevenChan/2011/01/ebs12_win2008_r2.html

  user13767670 wrote:
  is this means that we can directly install the EBS 12.1.X on the Microsoft Windows Server 2008 R2. ?

  I do not. As mentioned in the blog...

  Oracle E-Business Suite Release 12 (12.1.1 or later) is now certified by Microsoft Windows x 64 (64-bit) on the levels of the application and the database through a certified migration of an existing installation of version 12.

  Thank you
  Hussein

• Error of activation 0xC004C003 for Windows Server 2008 R2 Standard key: "the activation server determined the specified product key is in use".

  I installed Windows Server 2008 R2 Standard as a test version of an iso download got on the product site in Ms. In the meantime, I bought the software. Once the software has been delivered, I tried to activate with the key provided me with the software sent from Microsoft. I get... "the activation server determined that the specified product key is used" and throws the error asOxC004C003code. What gives here? They just sent me the key? I need to get this fixed as soon as POSSIBLE.

  Here is the Vista Forums.

  http://www.Microsoft.com/windowsserver2008/en/us/forums-blogs.aspx

  They will help you in the above Forums Windows Server 2008.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Here's what that means for Vista:

  http://support.Microsoft.com/kb/951287/en-us

  0xC004C003 error code

  The activation server determined that the specific product key is in use.

  This error code indicates that the product key you entered has already been activated, and you have to get a different product key.

  See you soon.

  Mick Murphy - Microsoft partner

• Microsoft Windows Vista Business OEM product key issue

  I have a Windows Vista Business OEM product key but no CD. Is it possible to download the Image? Or I can upload the image of windows 7 or XP and install (enter the product key: Vista) free?

  Hello

  It's not Microsoft, and we have nothing to do with your downgrade rights.

  Read these information from Microsoft:

  http://www.Microsoft.com/OEM/en-GB/licensing/sblicensing/pages/what_to_do_downgrade_rights.aspx#fBid=-8uYmGZfE4k

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Replacement of lost records.

  There is no Windows Vista downloads available from Microsoft.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Microsoft Windows Vista 32-bit product key

  Hello, my name is Tracy and my label of product key for my HP Compaq Presario CQ-60 is worn out, and I can't do the numbers.  How can I go on this product key recovery?

  Sincerely

  Tracy Lee

  You don't need to use the product key Windows Vista when you perform a recovery of HP.  Please see: Recover Windows Vista operating system using HP Recovery.

• How to use RMTSHARE to Microsoft Windows Server 2008 R2 Enterprise (64-bit)

  I want to give perm muti user using RMTSHARE.
  I download from http://support.microsoft.com/default.aspx/kb/172599 and run it. But I got an error: not compatible.
  Does anyone have an idea?
  Any point is appreciated!

  Hello

  Welcome to the Microsoft Answers community.

  The question you posted would be better suited to the Of Microsoft TechNet community (which may provide assistance with Windows Server, Windows 7 for the IT professionals).

  Thank you!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Oracle 10g to install on Windows server 2008 R2 (6.1)

  Hi all
  
  I am trying to install Oracle 10 g on windows Server2008 R2 (6.1), but it gives an error that OS is not supported. I tried to install below version.
  
  Oracle Database 10g Release 2 (10.2.0.4.0)
  Enterprise/Standard Edition for Microsoft Windows Vista x 64, Windows Server 2008 x 64,
  Microsoft Windows Server 2008 R2 x 64, Windows 7 x 64
  
  But it fails with the error that OS version 6.1 is not supported. On the download page, does it say for 10.2.0.5 patch of My Oracle support for windows server 2008 R2, I patch p8202632_10205_MSWIN - x 86-64 but it requires an oracle pre-installed home.
  
  So, how can I install Oracle 10 g 10.2.0.4 don't settle and the patch requires a previous installation?
  
  The reason why I want to install Oracle 10 g is our Java application is running in production on JDK 1.4 and Oracle 11 g provides not for JDK 1.4 JDBC driver, there is a JDBC driver for Oracle 11 g that can work with JDK 1.4?
  
  Thanks in advance for the help.
  
  Best regards!
  
  Irfan

  simpler is to use IgnoreSysPrereqs - key to avoud system check.
  more complex - locate the file oraparam.ini under your dstributive db installation directory and edit the string

  Windows = 5.0, 5.1, 5.2, 6.06.1

• Drivers for Windows Server 2008 R2

  PE1950, 2950 and MD3000i MPIO on Windows Server 2008 R2

  We're trying to nail a few dates to migrate our W2K8 R2 platform and plan the project.  We have most of our technical plans in place, and we have the code.  We have no Dell drivers however and there are several suspicious communications from Dell on this topic...

  Case #1: http://en.community.dell.com/blogs/insideit/archive/2009/08/10/ready-for-the-transition-dell-provides-support-for-windows-server-2008-r2.aspx

  Note:

  • Our engineers have missed on countless piano recitals, songs and episodes of American Idol while spending thousands of hours of testing and validation to make sure that dy products Dell running Windows Server 2008 R2 are the business-rea.
  • We have pilot complete support for Windows Server 2008 R2 for Dell hardware so you can deploy, run and manage easily. You can go here to download the drivers.

  If you view the service labels in our support of similar product groups, you will find an R2 option for servers... but the only public services on the PowerVault MD3000i you don't find any reference to R2 at all.

  Case #2: http://www.delltechcenter.com/page/Supportted+Dell+PowerEdge+Systems+for+Microsoft+Windows+Server+2008+R2+Beta

  This is a list of Beta for PE obviously compatible servers, however it would make sense If Microsoft has included natively the right drivers for the Dell hardware in the distribution of Microsoft R2 RTM so, just can't find any supporting documentation and do not know if the network drivers are compatible with MD3000i.

  #3: There are a few hacks to get drivers Windows 2008 MPIO inherited working with the RC R2 & MD3000i on this forum, but no reference to R2 in the MD3000i matrix and nothing on the site... it's why, we have wondering again where are the good drivers for R2 RTM?

  Can you be it someone from Dell and or this forum please send information on these issues?

  #1: driver compatibility of matrix for Windows Server 2008 R2 running on PE1950 and connected to an MD3000i PE2950 is a supported configuration?  (Code R2 RTM was released to Microsoft volume license customers)

  #2: the network drivers for the host machines included in the support of Windows Server 2008 R2 RTM?  If this is true, are the drivers MPIO for MD3000i and iSCSI Dell other platforms included in the support of Windows Server 2008 R2 RTM as well then?

  #3: If all the answers are not questions #1 and #2... could someone PLEASE contact people of pilot certification on Dell to see if they are same in QA at this point, if they plan to update and display an estimated date of implementation?  We have contacted tech support, but received very vague answers on anything with R2 at this stage.  There is a business directory and a path to escelation for support tickets, but the midrange as this makes it much easier to share information for the masses, we just have not yet found.

  Thanks for your information, comments and your support!

  OptimalState

  I was finally sent to someone who could give me some information on this within Dell, here's what they said:

  PE 1950/2950 drivers:

  The pilot should be included natively in Windows Server 2008 R2 media, and if so, would these drivers would be supported by Dell in a production scenario.

  MD3000i:

  I know that we will not issue a new MDSM which will fund 2008 R2 until sometimes in October. The MD3000i requires MPIO to the MD3000i and Dell drivers driver installation to work properly. I'll see if there is other information that I can find. I understand your frustration and engineer told me that this has been corrected in the next MDSM and MD3000i firmware version in October.

  So, it looks like October before MD3000i will be supported.

  OptimalState

• How to configure the mode of kiosh for thin clients on windows server 2008

  I have an eight Thin Clients who will use RDP to access (Terminal Server Services) Remote Desktop Services on a Microsoft Windows Server 2008 R2 Standard. I would like to set up a group of users for these Thin Clients to be in a mode Kiosh so that they have very limited capabilities, can not download and run anything, unable to save anything in the computer except on the desktop and when they log off and back on everything, they had disappeared because the mandatory profile is loaded again.

  I'll have another group that more access is needed.

  Kiosk.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Pwerconnect 5448, Windows Server 2008 R2

  Hello from France,

  One of my projects for a client is to create authentication secure via 802. 1 X. I chose to use freeradius.

  But the customer would not integrate a linux solution.

  So, I went to Microsoft Windows server 2008 R2 and the NPS. I've implemented two solutions

  First of all, a NAP. The solution works without any problem.

  But the second Setup dell powerconnect peripheral authentication via active directory active a does not. I have found and tried many HOWTO on the web, but none are compatible with my device.

  someone must deploy this solution with the Microsoft NAP? Is there a CEP of dell, which allow to solve?

  Thanks for your help

  Theo

  I'm looking for information here, and I don't see anything that could change the configuration of the switch. Everything works fine until we add the RADIUS of Windows in the mixture. With the Wireshark that you see even to make the request to the server, but then the server never sent a rear package to authenticate the user and the switch has expired for authentication and it connected as rejected.

• Allocation maximum vCPU for Windows Server 2008 Enterprise running on vSphere 4 Enterprise (ESXi 4.1)

  Hello

  I have a guest of Windows Server 2008 Enterprise (x 64) running on ESXi 4.1 with a vSphere Enterprise license 4. I believe that the comments and hypervisor should be allowed for and support 8 virtual processors, but when I add more than 4 and try to turn on the virtual machine, I get "market of the VM [virtual computer name] Virtual machine has 8 virtual processors but the host only supports 4. The number of virtual processors can be limited by the selected guest OS for the virtual machine or the granting of licenses for the host".

  The selected guest OS is 'Microsoft Windows Server 2008 (64-bit)'. There is no option in the drop down menu to 2008, Enterprise Edition.

  This configuration is actually supported? If so, what should I do to get it working?

  Thanks in advance,

  Matt

  Hi Matt.

  .. .on ESXi 4.1 with a vSphere Enterprise license 4...

  For vSphere 4, you need an Enterprise Plus license if want to create 8 vCPU VMs.
  In vSphere 5 will do a license...

  / Rubeck

• How to: install Windows Server 2008 R2 (64-bit) in ESXi 4.1 - 260247 with controller 'LSI Logic SAS'?

  Hello

  I have a newly installed ESXi 4.1 - 260247 on a Fujitsu - Siemens GROUND RX300 S4 with 2 x Intel Xeon E5420 @ 2.5 GHz with 36 GB of RAM.

  Storage controller is a LSI MegaRAID SAS 1078 6 x 750 GB SATA - drives configured with 3xRAID-1 logical drives. BIOS Version 4.06 Rev 1.04.2519

  Now, I'm trying to install "Microsoft Windows Server 2008 R2 64-bit" in a virtual machine, but fail because the virtual hard disk cannot be found.

  I tried with all Types of SCSI controller, but when running of the "Create Virtual Machine"-magician, he suggests 'LSI Logic SAS'. "." I tried 'LSI Logic parallel' and "VMware Paravirtual" but it did not work. However, I have not tried "Parallel BusLogic", since it clearly says no "recommended for this guest operating system".

  I was unable to find documentation on how and where I can find the "LSI Logic SAS" - pilot to be able to continue the installation. The

  Windows Server 2008 R2 installation is an ISO obtained directly from Microsoft eLicensing.

  I also downloaded the drivers floppy 'pvscsi - Windows2008.flp' and 'vmscsi.flp' from the ESXi server, but the program finds no driver validates the installation of Windows on them.

  I also extracted files "windows.iso' of the ESXi machine, but not drivers there as well.

  So my question is, what model is the "LSI Logic SAS", I guess I can download these LSI directly, I need to know what model?

  Any help appreciated.

  Thank you!

  Kind regards

  Christian

  chrkad,

  I think you have the same problem I had.   Trying to install 2008 R2 and asked for drivers?

  The issue wound up being an ISO corrupt Ms.

  Try to download the ISO using the java-based download manager.  This will tell you if your download is getting disturbed, as mine was.  It will also be the image once completed to ensure you've got the whole thing of checksum.  Just download via HTTP does not.

  I found myself in download the image of the House and burn a DVD and realize that the back of the office,

• move win2003 10.2.0.3 - db to windows server 2008 64 bit 32 bit

  Hi friend;
  
  I have my doubts, I have win2003 32 bit and 10.2.0.3 OS db (for ebs r12), I need to move db to windows 2008 64 bit. I am the following note:
  With the help of Oracle E-Business Suite Release 12 with a single platform of database Tier on Oracle 10 g Release 2 [ID 456197.1]
  
  The question is that:
  My source db is 10.2.0.3, during the remark, I need to create the home new oracle on win2008. I found 2 links for installation of db:
  
  Oracle Database 10g Release 2 Standard Edition, Enterprise Edition and Standard Edition One
  
  Oracle Database 10 g Release 2 (10.2.0.4) for Microsoft Windows Vista x 64 and Microsoft Windows Server 2008 x 64
  
  and
  
  Oracle Database 10 g Release 2 (10.2.0.1.0) for Microsoft Windows (x 64)
  
  
  I wonder if possible to use Oracle Database 10 g Release 2 (10.2.0.1.0) for Microsoft Windows (x 64) to win2008 too? or I need to download Oracle Database 10g Release 2 (10.2.0.4) for Microsoft Windows Vista x 64 and Microsoft Windows Server 2008 x 64?
  
  PS: Do not forget I 10.2.0.3 on the source server
  
  Thank you

  user12203572 wrote:
  Hi Alex

  Yes, these steps are correct, but after the third stage (backup (dbf) cold copy from source to target) thenyou need to make my third step above (3.Startup of the database with the mode upgrade as below) in my reply

  You mention below step:

  2. transfer this backup on target server (windows 2008 64-bit and 10.2.0.4), Create new service oracle using oradim (oradim-new - sid intpwd - syspass - pfile 'pfile_location') *.< i="" wont="" do="" it="" coz="" note="" doesnt="" mention="">
  3 database starting with the mode upgrade as below
  Set ORACLE_SID =
  sqlplus "virtue sysdba".
  Startup pfile upgrade = "pfile_location.
  @$ORACLE_HOME\rdbms\admin\catupgrd.sql;
  stop immediately;
  Startup pfile = 'pfile_location.
  @$ORACLE_HOME\rdbms\admin\utlrp.sql;
  Create spfile from pfile = utlrp.sql;

  But in the note, he just says:
  Database of option C) migrate Windows 32-bit Windows Itanium or x 64 Windows

  To move the Windows 32 - bit Windows Itanium or x 64 Windows database, follow these steps:

  Copy the files (.dbf) database of the source on the target computer computer
  Copy the configuration of database init.ora and ifilecbo.ora files
  Change the configuration on the computer files target to reflect the new environment. In addition, the value systemtrig_enabled = false
  Startup of the database in nomount mode
  Recreate the database control files
  Upgrade the database from 32 bit to 64 bit (modules of pl/sql recompiles and change the size of Word) running utlirp.sql and utlrp.sql (in ORACLE_HOME/rdbms/admin /). See the sections use and notes in each of these scripts for instructions on how to execute them.
  Delete systemtrig_enabled = false of init.ora
  Stop and restart the database normally

  And don't forget it's db E - Business Suite, still belive that I need step 3? Coz he doesn't mention in the footnote, I just want to be sure my friend. Thank you for your understanding

  These steps are correct, there are no problems. I also wanted that same sweet Oracle is the same, it need compile and upgrade of database objects, due to this there version OS and architecture is different (32-bit and 64-bit). As you mentioned the upgrade of database you can instead of my third step as

  Upgrade the database from 32 bit to 64 bit (modules of pl/sql recompiles and change the size of Word) running utlirp.sql and utlrp.sql (in ORACLE_HOME/rdbms/admin /). See the sections use and notes in each of these scripts for

• Windows server 2008 product key missing

  in my office install us windows server 2008 32-bit and the server request missing product key product key. How to get to link key

  Thank you for visiting the Microsoft Answers site.

  The question you have posted is related to Windows Server 2008 and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads