Microsoft wireless mouse and keyboard
When I scroll upward or down with the mouse, the result is delayed by a second or two. Otherwise, works well.
1. you have made no changes to the computer before the broadcast took place?
2. what operating is installed on the computer?
3. What is the number of the model of the mouse and keyboard?
Try the steps from the following links:
The problems with the mouse button or scroll the parameters
Troubleshoot the incidents of the response to the mouse or wireless keyboard
If the steps above fail, then I suggest you to update the mouse drivers by selecting the model number of the mouse from the following link:
I have a combo of Microsoft wireless keyboard/mouse and the mouse went bad. The mouse went bad and I replaced the mouse of this combo with a standalone Microsoft wireless mouse. The stand-alone mouse and the keyboard/mouse combo are both connected via USB. From the start and a few other times randomly, my mouse goes haywire. I open the Device Manager and see that there are 2 "mouse HID-compliant" items listed (I presume because of two separate USB connections) - I right click and uninstall one of them (or the other, it's not serious) and the problem is solved. Unfortunately, at startup or at other times, the same problem happens again, and I solve it the same way. Short of buying a new keyboard, is there a way to fix this permanentaly?
I don't think that you need to plug the new mouse, it should work on the original sensor.
my wireless mouse and keyboard do not with windows xp after you install a new battery. they work very well in the diagnosis.Hi nwecker,-What is the brand and model of your mouse and your keyboard?If the keyboard and mouse are Microsoft, here are some links that you can give a try on:
I downloaded DriverHound, scanned and 73 drivers who need updates. I downloaded the new sand pilot went to automatic installation. Never completed facilities and the mouse and keyboard stopped working. No problem with the monitor. I put charges batteriesin the mouse and keyboard, deleted/replaced the USB connection without success.
I'll send this to my laptop which is not downloading from DriverHound. Computer is h9 - 1270t.
Hello new WDJ37,
I provided you with the HP support document: using HP Support Assistant (Windows 7), who will explain how to use software that will automatically update your software and drivers from HP. I am also including a link to the HP Support Assistant so that you can download and install the latest version of the software on your computer.
Please re-post if you need extra support. Thanks for posting on the HP Forums. Have a great day!
I have a problem with the mouse, because the battery led indicator does not work and why I never know when I have a low battery level and this problem also occurs in the keyboard, I use batteries no rechargeable ones, but also tested with rechargeable, and when I put new batteries green light led displays , but then the led turns off and doesn´t work once again, even if it should indicate low battery, I installed the latest drivers for the keyboard and mouse and I Don t know what may cause this situation, I, apreciate your help.
Please contact the Microsoft Community.
I you have to check out these items-
If nothing is done, then I wish you contact Microsoft Hardware Support for assistance more -.
Let us know if you need help pertaining to the Windows operating system.
For my birthday, we got a keyboard and mouse wireless Jenkins. I went to get my dell inspiron n5110 (Windows 7, x 64) and I opened and plugged in. then SAIS "Device Installation" "Search Windows Update" 'Search pre-configured files' 'NO DRIVER FOUND' and I was like whaaaaattt... so I goto the Device Manager and check why. Driver Manager put it under "Other devices" and he know 2.4 GHZ 2WAY RF RECEIVER, then I go online to search for a driver. the last driver that it was since 2006 and I downloaded it, but I didn't know where to put the files. so I ignored it. and went to the microsoft site answers found a guy with a similar problem, but he said 'I then plugged it at startup after uninstalling the Device Manager.I did and it worked! I logged on then he know... INSTALLING DEVICE... NO DRIVER FOUND... so then, on the same saw post whose existence was a moderator of microsoft who gave 3 methods on how to solve this problem. on the 3rd, he was using the registry. I followed where to go and locate the first file in a folder that I had to remove "FILTER" then delete "FILTER BELOW", but upper filter was not only lower filter... so I came here and I hope someone has the answer :)
I suggest you to contact the manufacturer of the mouse and the keyboard for the pilot.
Email us if you have any other issues related to Windows.
Original title: question of another wireless keyboard and mouse.
Is the keyboard model 1. 0 comfort wireless 1045, the optical receiver 3.0 has & optical mouse taken 2.0 supported by Windows 7? They are used to work with XP & my Vista Ultimate Home. In fact, they have worked with Windows 7 for a while. I think that an update (I have no idea of who or what) caused the keyboard to stop functioning. Yes, they are old, but I do not keep up with the Jones, I use what works, until someone thinks that we need another dose of fallout and disables it for me. I'm angry again.
[Moved from comments]
It seems that you have a problem with performnace of the mouse and wireless keyboard.
I suggest you consult the following links, which have enough information to solve issues of the mouse and the wireless keyboard.
Troubleshoot the incidents of the response to the mouse or wireless keyboard.
Troubleshoot wired keyboards that do not or only the erroneous characters category.
I hope this helps!
I bought 6000 Microsoft wireless mouse and keyboard a year ago and just mouse combo has randomly stopped working.
I turned off my computer and the next day it turned on and the mouse does not work now.
-J' put in new batteries and re-synced it and who did not
-J' tried to connect on the other USB ports, which did not work
-J' reinstalled the driver, who did not work
-J' tried it on my laptop and it doesn't
I think that my warranty has expired as well.
Microsoft please help, there was no sign of him dying off the coast, and I don't see what anyone who would have triggered this.
It just seems odd that one day that shut down you your computer, and the next day your mouse does not work.
· Remember to make changes on the computer before the show?
· You receive an error message or error code?
I suggest you follow the steps in the bottom of the article in the Microsoft Knowledge Base to resolve this problem:
Troubleshoot the incidents of the response to the mouse or wireless keyboard
Let us know if it helps.
installed windows 8 after install to customize exactly the point of putting up wireless mouse and keyboard no longer works has had to use keyboard.to and wired mouse usb finish install. Still does not work after restarting.
I'm sorry to know that the keyboard and Microsoft mouse do not work on the Windows 8 operating system. But we can fix that later article, which gives a few steps on how to solve the problem of mouse and wireless keyboard.
Please click on the following link and follow the steps. http://support.microsoft.com/kb/838398. This article applies only to the hardware devices that are mentioned in the properties. Please make sure that your keyboard and wireless mouse is referred to as properties.
Hope this should solve the problem. If you still have the same issue, just reply to us and we can help you better.
Original title: my mouse is weird
I have a small (3500 version) Microsoft wireless mouse and I just put a new battery in there and all I get is a red light flashing slow... the battery is good... I tested it... any help would be greatly appreciated. It's probably something really stupid that I'm missing, but I hate that touchpad and I take courses online and rely heavily on the mouse to avoid mistakes... Help!
There are many reasons why we have a flashing red light on a Microsoft wireless mouse. The mouse software may need an update, you're battery may need to be replaced or recharged, you're wireless device can be connected to a port is non-functional, something can interfere with the wireless mouse.
Here are some tips you can follow and see if that helps.
1. download and install the latest drivers for mouse depending on the type of computer http://www.microsoft.com/hardware/en-us/p/wireless-mobile-mouse-3500#support system
2 a wireless device may interfere with each other. Look at the bottom of your mouse to see if it has a button to synchronize with the receiver. If Yes, press this button. In so doing resync the mouse using a different channel. Turn the receiver upside down or on its side to see if you are able to get a better connection. Remove the other wireless devices, such as a wireless or a cell phone and make sure that the mouse is located at a distance of at least eight inches of a wireless keyboard. Make sure that the mouse is not on a very close to metal objects or metal surface.
3 try using a mouse instead of using it on a glassy or metallic surface.
4. ensure that the batteries are inserted correctly. Open battery compartment. Check and remove anything that might obstruct the battery connection. Search corrosion as well and remove, if possible.
I hope this helps.
I have a Logitech wireless mouse and keyboard to shuttle USB. All the drivers appear to be up-to-date. The system will just lock and does not recognize the mouse or the keyboard. Everything is always on display at the screen he did. Need to restart the entire system.
(Moved to programs)
Thanks for the info. just stopped system do so after windows updated itself.
I have a microsoft wireless mouse and when I disconnect the mouse my Screensaver works. However, when the mouse is connected the screen saver does not work. How can I fix this problem?
HelloThe screen saver does not start after the installation of a wireless pointing device:
http://support.Microsoft.com/default.aspx/KB/913405Check the link and the information mentioned in the link above and try them, check if the problem still persists.Hope the helps of information.
Mouse and keyboard Microsoft Wireless Comfort 5050 will work with my MAC
With due respect, look at the configuration required for the keyboard and the mouse and see if your iMac has the bare. You can find this information by clicking on https://www.microsoft.com/accessories/en-us/products/keyboards/wireless-comfort-Bureau-5050/pp4-00001 #specsColumns - testCarousel
My guess is Yes, but you were not specific about which iMac you have so I can't say for sure.
I had brought the combo of Microsoft Wireless Mouse 1000 and Microsoft Wireless Keyboard 800 a few months back, but accidentally my Receiver USB got damaged (physically) then, of course, he will not be replaced under warranty then please tell me how can I get new receiver for my mouse and keyboard. If it is not possible to get the receiver just tell me that if I buy the new keyboard 800 then receiver will work for my old mouse and keyboard or not. Any help to solve my problem will be highly appreciated.
I suggest you to contact the Microsoft Hardware support for assistance.
Before contacting the Microsoft Hardware support, you can check the link below.
I hope this helps.
Original title: Microsoft Mouse and keyboard Center does not recognize my Microsoft Wireless Notebook Optical Mouse 3000'
My Microsoft Wireless Notebook Optical Mouse 3000 works fine but when I click on it in the devices section and printers on Panel, Microsoft Mouse and keyboard Center does not recognize. It displays the text "No Device detected". Here is a screenshot of what I see:
Thanks for the reply. It is regrettable that uninstall the existing mouse device manager drivers did not help to solve the problem.
I suggest that you go to the program and features under programs installed and check if there are any associated with IntelliPoint software or any software application related to the mouse installed. In the affirmative, please go ahead and uninstall them and then try to install the driver software IntelliPoint 8.2 in compatibility mode as stated in my previous post dated 22 December 2014. See the following link on how to uninstall program:
Please answer us on the State of the question to help you further.
Maybe you are looking for
When I opened the browser today, a message of BlockSite by asking if I "would help study the use of the internet.» I clicked on 'no '. Now Blocksite blocks all websites. I can only ise firefox in "safe mode". How to uninstall the thing d * of my brow
Hello, I bought a computer hp laptop pavilion x 360 11 n011dx, formatted and installed windows 8.1 64 pro (in Portuguese Brazil) everything has worked perfectly just the touch screen if it is stopped. I tried to format and install windows 8 enterpris
I bought a Toshiba Satellite m70-144, December 2005. Very nice computer, but there is an error with the ATI Radeon X 700 graphics card. Pixels are placed in random places with random on the same screen of _avant_ operating system is loaded. I called
My documents and pictures, and favorites are all gone!
How to reboot or restart or refresh curve 8520 without removing and rebonding of battery?