Microsoft wireless mouse no longer works on Inspiron 8200
Our Microsoft Wireless mouse no longer works on our Inspiron 8200. We have a red light on the mouse so it's on and we just changed the battery in the mouse. The computer no longer recognizes the mouse. Before his stoppage of work completely computer did not come out of standby/hibernation mode correctly. He had to press the power button rather than wake up it with the mouse.
Now that I have attached a wired mouse, he wakes up as it should with the movement of the mouse or a key.
Do you by chance have a solution that I can download?
Thank you.
SheilaMc
Tags: Dell Products
Similar Questions
-
Microsoft wireless mouse no longer works
The device is not listed in the Device Manager list and I can't find the disk to reinstall, it's a Microsoft Wireless Mouse 700...
http://www.Microsoft.com/hardware/download/download.aspx?category=MK
See if the above helps you to use the software for it.
See you soon.
Mick Murphy - Microsoft partner
-
Keyboard and wireless mouse no longer works
my keyboard is msi star type ES500W. Computer... top of wind msi ZE2010. After changing the batteries in the keyboard and mouse wireless, they no longer work. The computer says that they are beautiful, but they don't work! I'm not computer savy so please talk to me as tho I'm in kindergarten. Thank you
Hi Louise,.
1. you receive messages or error codes?
2. did you of recent changes on the system?
3. what version of Windows are you using?
Perform the following methods and check if it helps.
Method 1:
Try to connect the keyboard and mouse to any other computer / or any other port and check if it works very well.
Method 2:
You can try to run the hardware troubleshooter and check if it helps.
Convenience hardware store
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 3:
You can also try to update the drivers for the keyboard and mouse.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Update drivers: recommended links
http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
Method 4:
You can also try to synchronize the device with the receiver again. Then try to reinsert the batteries. Also, look for the interference of signal from nearby electronic devices.
Hope this information is useful.
-
my microsoft wireless mouse has stopped working, I replaced battery
my wireless mouse was fine and then stopped working. I changed the batteries and it seemed to work and then arrested again.
Hello
I suggest you to follow the steps in this link and check if it helps:
-
wireless mouse no longer works
well, it's weird. I have 2 wireless, Logitech mouse, and none does not work on my desktop or my laptop. Vista laptop, Desktop computer is Windows 7. One of the mice is a keyboard/mouse combo and the keyboard works! I downloaded all the latest drivers from Logitech. Control Panel shows the two mice work properly. Worked fine a couple of weeks, the last time I used my cell phone... any ideas? Thanks in advance
HelloStep 1: We recommend that you first uninstall the mouse from the device manager driver. To do this, follow these steps.
1. click on start, type devmgmt.msc and press to enter.
2. from the list of objects, expand mice and other pointing devices.
3 right-click the sub element that makes reference to the wireless mouse, and then click on uninstall.
4. disconnect the mouse adapter.
5 restart the computer for changes to take effect.Step 2: Install the mouse driver.
1. visit the website of the manufacturer of the mouse and download the Vista compatibility mouse driver.
2. plug the mouse adapter.
3 install the driver and restart the computer for the changes to take effect.Device in Windows Vista drivers: http://support.microsoft.com/kb/942462Try the steps and post back with the results, so that we can help you further.Kind regards
Syed
Answers from Microsoft supports the engineer. -
My Microsoft Wireless Mouse 5000 new scrolls only in one direction in Quicken. This seems to be the only program with problems. All the answers?
Hi retiredinflorida,
Welcome to Microsoft Vista answers Forum!
It is a known issue using IntelliPoint from Microsoft and Quicken software drivers. Both parties are aware of the problem and as soon as a hotfix or patch for this problem is available it will be displayed on the Quicken Web site so check with their website on a regular basis.
However, if the Microsoft Wireless Mouse 5000 problems in other applications, you can check the links below.The Microsoft wireless mouse does not work as expected if:
You may want to consider this link to fix the problem: http://support.microsoft.com/default.aspx?scid=kb; EN-US; 838398
In the case want ot uninstall and reinstall the mouse drivrs use this link: http://www.microsoft.com/hardware/windows7/support.mspx
Hope this information is useful.
Let me know if it worked.Thank you, and in what concerns:
Aziz Nadeem - Microsoft technical support.
Visit our Microsoft answers feedback Forum
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and let us know
what you think -
Microsoft Wireless mouse not working not properly in Excel.
Original title: using the buttons of foam in Excell
Reference: Microsoft Wireless 5000 foam
I use the foam buttons in Excel to navigate backward/forward "TABs". It is very useful and is in fact the reason to get a 2 buttons and scroll mouse 4-way.BUT... it does not work with this Wireless foam 5000. He has worked with my old Logitech... that would mean Microsoft foams are not completely compatible with Microsoft Software?...I downloaded the latest version of IntelliPoint v8.1.239.0 but nothing has changed.I am running XP with Office 2007.Any idea?It seems that there are some 8.2 updated drivers for the mouse on the Microsoft Wireless Mouse 5000 Technical Support page. It might be useful to install to see if it solves the problem.
-
Microsoft wireless mouse 6000 v2 just stopped working
I bought 6000 Microsoft wireless mouse and keyboard a year ago and just mouse combo has randomly stopped working.
I turned off my computer and the next day it turned on and the mouse does not work now.
-J' put in new batteries and re-synced it and who did not
-J' tried to connect on the other USB ports, which did not work
-J' reinstalled the driver, who did not work
-J' tried it on my laptop and it doesn't
I think that my warranty has expired as well.
Microsoft please help, there was no sign of him dying off the coast, and I don't see what anyone who would have triggered this.
It just seems odd that one day that shut down you your computer, and the next day your mouse does not work.
Hi BrandonBB,
· Remember to make changes on the computer before the show?
· You receive an error message or error code?
I suggest you follow the steps in the bottom of the article in the Microsoft Knowledge Base to resolve this problem:
Troubleshoot the incidents of the response to the mouse or wireless keyboard
http://support.Microsoft.com/kb/838398
Let us know if it helps.
-
Microsoft wireless mouse stopped after 6 months of work: happened twice in two days
Windows 7 x 64. I've had the system for 6 months. Yesterday did this problem start happening.The Microsoft wireless mouse pointer freezes in the middle of the screen (but my wireless keyboard IOGear, that I had also six months, still works fine and the computer itself is not suspended but is still running fine - it's not a blocking system general but isolated on the mouse wireless device and related things).I tried the following:- Changing the battery on the mouse (ensuring battery was good, of course).
- People with disabilities/re-enabled the HID device.
- Deleted then recreated the HID device.
- Searched updated drivers (Windows reports mine are up to date)
- Remove and reinsert the battery.
- Stop and restart.
- Remove and reinsert the battery.
Finally yesterday, after reinserting the battery after a reboot, the mouse is back to life. However, today the same problem happened again. I tried it again, but nothing helped. I also downloaded the new Bluetooth drivers on the ASUS site and install them. Restarted. No joy.BTW, Windows always reports the pointing HID device and Microsoft Wireless dongle work correctly, even if the mouse pointer is frozen in the middle of the screen.Hello
As the mouse does not work on another computer, please replace the mouse.
For additional assistance, please contact a manufacturing: http://www.Microsoft.com/hardware/en-us/support
Kind regards.
-
HP laptop: wireless mouse does not work
After mobile update on oct 6th wireless mouse is not working.when I am looking for in the receiver 2.4 g device is here.
I did a hard reset but it does not. The mouse is iball freego 2.4 g wireless optical mouse
and even when I went to download a software to reinforce the msg me: "We have couldn't retrieve the list of drivers for your product." Help out me
Hello;
Let me welcome you on the HP forums!Sorry, but if your talk to get the mouse drivers from HP, what's not at work, such as HP does not include drivers for the hardware not HP.
Have you tried to download the drivers from the manufacturer of the mouse?
You must go to the settings, update & Security-> Windows Update.
Then, choose Advanced-> history to see when the updates have been applied last. If you see one that include device drivers, who might be the problem. So, if you can, you should see if you can restore the drivers that are causing the problem. Do so you by going into Device Manager, see if the device is still listed and so, trying to restore the last driver update.
And if this resolves the problem, then disable future driver updates by using the information in the link: http://www.tenforums.com/tutorials/48277-driver-updates-windows-update-enable-disable-windows-10-a.html
If the appropriate device adapter is no longer present in the Device Manager, what MIGHT work is something known as a repair installation. It is less destructive of all Windows recovery features and rewrites the Windows system files, leaving your apps, settings and data intact.
To do this, you will need to use the link to the installation media to download Win10 and burn a DVD or create a USB key: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10
Once you have, follow the instructions in the link: http://www.tenforums.com/tutorials/16397-repair-install-windows-10-place-upgrade.htmlGood luck
-
The keyboard and the mouse no longer works to update you Sierra
Hello, I upgraded to OS Sierra and I began to spend more and suspending Notepad, then I do not recognize their keyboard and mouse notbook. It forces the walk outside and then worked, but after a few days I don't work any more.
Thank you
The keyboard and the mouse no longer works to update you Sierra
Hi gnardone,
Thanks for posting in the Community Support from Apple. I understand that you are having problems using your mouse and your keyboard after the update for Sierra. View the work of keyboard and mouse are crucial for your Mac, so I can understand how this is a problem for you. I'm happy to offer assistance.
You are having problems with the keyboard and the trackpad that are part of your MacBook or you are having problems with a keyboard and an external mouse? I recommend taking a look at the article below.
If your Apple wireless mouse, keyboard or trackpad doesn't work as expected
If you're still having trouble, let us know what kind of mouse and keyboard that you are having problems with and what you have tried to solve this problem.
Best regards.
-
Dead zone wheel 3000 Microsoft wireless mouse
Hello
I don't know how find this problem on the internet so I wonder if anyone can help make me the right words to look for this problem.
I have Windows Vista Ultimate x 64 and a 3000 Microsoft wireless mouse
When I scroll with the wheel, if I go down and upward, there is a dead zone where nothing happens. I rotate part 2 wheel lines, and on the other to scroll.
For example if I scroll in IE, everything is fine until I have stop and reverse the first line and then nothing happens, no scrolling at all and when I'm in the second row, it starts to scroll the means that if I scroll and down just 1 line nothing happens and that means on both sides , which means only 2 lines of scrolling that does nothing.
I checked all the configurations of driver for the mouse, and there is nothing about it. I don't want this dead on the mouse wheel zone
I would really appreciate links, ideas on this subject. I don't know if it's a driver problem, a hardware problem or it's just the way the mouse works.
Thank you
Hey thanks. Method 1 worked at http://support.microsoft.com/kb/838398
-
HP touchsmart IQ775 Wireless mouse has stopped working.
Wireless mouse has stopped working. I have a HP Touchsmart IQ775 so I can touch the screen to navigate. did a restore of the system in SafeMode this morning and everything works fine now, but of course, it happens again. Last week, the computer did an update to quicktime which disabled, so I had to completely uninstall quicktime and the mouse immediately worked. looked but could not find that whatever this is updated overnight to re - train the problem this morning. However, the system closed and said 'power system failure driver' cannot know how to fix this, all say updated mouse drivers. is associated it with? This not computer savvy, usually google problems on my ipod touch and looking and staring at me but were not able to understand this. Thanks for all the tips
Hello
HP also has their own update so he could be there?
I would stop automatic driver updates, because they are often older certified and MS is far behind.
If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
------------------------------------------------------This, to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Try to run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------
Also check with HP support and forums.
HP support
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
My mouse no longer works, connected a new one and still nothing... looks like it's ok in the two control panel and Device Manager. Help!
Hello
1. What is the brand and model of the mouse?
2 are you able to use the same mouse on another computer?Please answer these questions and tell us more about the issue.
Try the fix tool running of the article below and check.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/May you enjoy a look at the article below.
Tips for solving problems of USB devices
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices -
Microsoft wireless mouse model 1007, wheel does not
original title: Wireless microsoft model 1007 mouse, wheel
Microsoft wireless mouse model 1007, wheel works and what doesn't. What's up w / that?
Hi BradCasey,
I suggest you to follow the steps described in the article provided below and check if it helps.
Maybe you are looking for
-
Satellite P10-304 - update Windows 7 problem
I have a Satellite P10 304 to 2003 which has Windows XP, but I need to update for obvious reasons. I bought a copy of Windows 7 (32 bit) and installed without any installation problem, however I can't update Windows. I reinstalled, deleted the hard d
-
Why aren't Firefox system requirements and disclosure of information made accessible via links on the main pages of Firefox?I can find them easily enough via Google, but I wonder why they can't be found in in mozilla.com.Even a search in aid of "Fire
-
Maximum sampling frequency for the NI 9234 is given as 51.2 kech. / s in documentation NOR. This means that for a House to measure collection measures of 3 different instruments rate is 51.2 kiloSample/second/3 = 17 kiloSample/second. It's 17 000 sam
-
I was told to create a Notepad document: notepad C: \removetemp.bat, it will not save and tells me it is invalid: how is this possible? All the instructions I gave do not work. I'm almost tearing my hair! Concerning Sharon_Friday
-
Phone call made by 97059007 who claims to be the Microsoft.
Hello I want to report a scam call 97059007 today 09:40, 17 August 2016. The girl had an Asian voice and claimed to be yourself "Microsoft." I told him that I do not discuss my company on the phone, or give out any personal information. Then, I clung