Migrate network Script

Similar Questions

• How to run a startup from a network script Script?

  I want to place my startup script on the network so that when I update or change the script, it will be updated on the other computers, on which the script is.  Is this possible with a startup script?

  Thank you

  Chris Bishop.

  You can use a shortcut to the script, and not the file itself. For example, if all users use the shortcut, then all changes made on the file should be reported to other computers, they have all given the min volume access.

  Apart from this, one of my clients uses some utility to send a file all of the computers of users that they may be updated with a single click. But I don't remember what it was exactly. I think this is a native feature of MacOs. Will try to get some info.

  Finally don't forget that startup scripts require inDesign to start over if there are changes in the script.

• MySQL to Oracle Migration offline: scripts incorrectly generated for tables

  Hello
  
  I used SQL Developer 3.0.4 to migrate Mysql to Oracle databases.
  
  I have the following errors on the charger (oracle_ctl.sh) scripts to run:
  
  SQL * Loader-2026: the charge was dropped because SQL Loader cannot continue.
  SQL * Loader-500: could not open the file (data / framework_perdadepacotes_diari.txt)
  
  
  The "framework_perdadepacotes_horario.txt" dump file is generated by mysqlsdump with the original mysql table name and ".txt" sufix:
  -excerpt from unload_script.sh
  mysqldump-u $username - p $server h $ t socket=/u01/mysqlmulti/mysql2/mysqld2.sock port password data = 3312 fields terminated by = "< EOFD >" fields escaped by = ""-lines terminated by = "< EORD >" "dxdb" "framework_perdadepacotes_horario" "
  
  but sql loader controlfile makes reference to the file by using the new name of the oracle table (in this case, that the new name is truncated to 30 characters):
  --
  load data
  INFILE ' data / framework_perdadepacotes_diari.txt ".
  "str"< EORD >"
  in the dxdb.framework_perdadepacotes_diari table
  
  
  Another instance of the same problem, but in this case the table name starts wth "_":
  -of unload_script.sh
  mysqldump-h $server u $username - p$ password t data fields terminated by = "< EOFD >" fields escaped by = ""-lines terminated by = "< EORD >" "netdb" "_Clientes" "
  
  file name generated by mysqldump: "_Clientes.txt."
  CTL file:
  load data
  INFILE ' data / CLIENTES_1.txt ".
  "str"< EORD >"
  in the CLIENTES_1 table
  
  Is this a bug, or are we supposed to manually fix the scripts for these cases?
  
  Thank you
  
  Edited by: user12099785 11/10/2011 06:11

  Currently, you have to fix manually because there was no bug recorded for this question. I have now filed the bug and it will be if all goes well fixed in one of the next versions to come.

• Access 2003-&gt; Oracle 10 g: fixed error of migration, SQL script

  I recently migrated an Access 2003 to SQL using Oracle SQL developer Oracle database, and the process went well, with the exception of some migration errors.
  
  The errors I had have largely brought on 3 main groups:
  
  (i) "doesn't have to convert' errors:
  Failed to convert view Q345_Delete_NR > filename. Q345 - Delete NR: unexpected node in the AST: EXEC_PARAM_LIST: column of the row-1-1
  
  (II) 'limitation of translation mistakes:
  Limitation of the translation "cannot convert to display" met on view filename. Q326 - update column of NA column_name line 0 0
  
  (III) "parse errors":
  oracle.dbtools.migration.parser.ext.ExtStringTemplate.setValue(ExtStringTemplate.java:106)
  
  I know that these can be fixed, but I'm unable to understand what they mean. I would be grateful for some advice on what this means and how do I address to them.
  
  Finally, I would like to watch the complete SQL script for the database migrated - please someone let me know how to consider this in a single sheet? I would like to create a stored procedure from this one.
  
  Thank you.
  
  Published by: 803242 on October 19, 2010 16:23

  As you have an Oracle database you currently have support for this database and this is quite enough to save a service request for the SQL Migration Workbench developer.
  Saving a service request will allow us to examine the migration of more detailed SQL Dev and then we can improve the product.

  (The stored procedures, you need to manually extract the instructions in the script generated) that you intend to do) and then put it in a procedure.

• Server cerificate PKI in the network script: EEM DMVPN

  Hi all

  Before to jump in the topic, I have two questions:

  (1) when the root certificate expire it is possibe to renew automatically?

  (2) when a ray is certificate renew speak it will save the new certificate in NVRAM?

  ----------------------------------------------------------------------------------------------------------------------------------

  What I'm looking for is a solution that might send a log/mail to our customer 2 days (for example) until the certificate expires the certificate authority ROOT/a TALK. It could be a script TCL or EEM.

  All people ideas on how he could do better?

  Thanks in advance.

  Kind regards

  Laurent

  Laurent,

  If you registered via the CEP, as I remember, timers for bearing cert CA indetitiy are kept (you can check in 'See the timer crypto pki').

  We gradin not not automatically the certificate to the running configuration, you must perform a manual "wri" what registration or re-registration is made, it is to be able to recover if things don't go your way.

  I have never created such a script, but depends strongly on your current deployment/configuration scenario.

  Marcin

• Migration for customizations of the OFA script

  Hello Experts - can someone provide me with migration .sh Scripts or commands for extensions of VO, EO, CO and. XML pages. ? to perform at the level of UNIX from one instance to another instance.

  Thank you

  Sandy

  Hello

  There are various sites available online, detailing the migration of the OFA.
  Links below may be useful for you.
    
  http://shilpaviswanath.blogspot.AE/2012/03/useful-scripts-in-OA-framework.html  
  http://www.oracleappsguy.com/2015/05/How-to-migrate-OAF-personalizations-to-other-instances.html

  Thank you

• ESX 3.5 and I seem to have lost all the networks.

  DL580 G4 with ESX3.5. I've migrated all clients to another ESX Server, but it went a bit strange to say the least.

  After the migration, all the guests off I went forward and add more ram and restarted. Server come OK, tells me the IP address to connect to (static) but that's all.

  I can ping 127.0.0.1, but not static host ip address, I get an error "connect: could not connect to the network.

  If I check the following localions I get zero information in files

  / etc/hosts

  etc/network-scripts/ifcfg-vswif0

  etc/VMware/ESX.conf

  If I try the list of network adapters that I get no NICs in the list, if I have the material list network get hardware type and mac address.

  I see no switch to vmware if I try esxcfg-vswitch - l

  I tried to restart the network and a few other services that I found on Google, now claim.

  If I start using ERD Commander and enable networking I can not use the 2 onboard NICs but can use 2 additional network cards / 4 ports and can ping / map of external drives.

  Hello

  I think it would be a case of corrupted file esx.conf. After the upgrade of the host by adding more ram or anything else, you may need to update the initrd image that you don't have and this translates into the corruption of your esx.conf file. Until that time, that it's the only imagination, I can take.

  Now, there are simple process of recovery of the original esx.conf file. Please see the procedure below.

  #

  Connect to the ESX host with a SSH client, or connect directly to the ESX with KVM console.

  #

  Back up the corrupted file esx.conf using the command:

  CP esx.conf /tmp/esx.bad

  #

  Copy the image into a temporary directory using a command similar to:

  CP /boot/initrd-2.4.21-47.0.1.ELvmnix.img/tmp

  Note: The version of the initrd image is different from the ESX 3.x. If the version in the command / tmp /boot/initrd-2.4.21-47.0.1.ELvmnix.img cp is different, cd to the directory/boot and run the ls command to see your version.

  #

  Decompress the image file using the command:

  CD/tmp

  gunzip - dc initrd - 2.4.21 - 47.0.1.ELvmnix.img > initrd.unziped

  #

  Create a directory and mount the uncompressed image using the commands:

  mkdir initrd

  Mount-o loop initrd initrd.unziped

  #

  Copy the file esx.conf to the directory mounted at/etc/vmware/en using the commands:

  CD/tmp/initrd/etc/vmware

  CP esx.conf/etc/vmware.

  #

  Remove the directory mounted in step 5 by using the commands:

  CD/tmp

  umount/tmp/initrd

  #

  Restart management agents for the changes to take effect.

  Now other solutions could be looking to recreate the Console of the ESX Service and see if that can help you. Procedure is as below:

  On your system, the vswif, vmnic, numbers of vSwitch and network settings are different.

  1.

  Run the following command to list the name of the map of vswif:

  esxcfg-vswif - l

  2.

  Run the following command to remove the adapter vswif:

  esxcfg-vswif - del vswif0

  3.

  Run the following command to list the name of the vSwitch:

  esxcfg-vswitch - l

  4.

  Run the following command to remove the vSwitch:

  esxcfg-vswitch vSwitch0 d

  5.

  Run the following command to create the vSwitch:

  -an esxcfg-vswitch vSwitch0

  6.

  Run the following commands to create ports for vSwitch default groups:

  esxcfg-vswitch - a 'network of the VM' vSwitch0

  esxcfg-vswitch - a "Service Console" vSwitch0

  7.

  Run the following command to create the adapter vswif:

  esxcfg-vswif - add-- ip = nnn.nnn.nnn.nnn-"Service Console" portgroup mask = 255.255.255.0 subnet vswif0

  8.

  Run the following command to verify that the settings in the network file are correct:

  sysconfig cat

  Networking = yes

  GATEWAYDEV = vswif0

  HOSTNAME = Host.domain.com

  Gateway = nnn.nnn.nnn.nnn

  9.

  Run the following commands to list all network cards and associate a vmnic which has a status of site link:

  esxcfg-NICS - l

  esxcfg-vswitch - L vmnic1 vSwitch0

  10.

  Run the following command to verify that the vmnic is associated with the vSwitch:

  esxcfg-vswitch - l

  11.

  IP address ping to verify network connectivity. If the ping fails remove the previous vmnic from the vSwitch and try another adapter that has a

  State of the link towards the top.

  esxcfg-vswitch - U vmnic1 vSwitch0

  esxcfg-vswitch - L vmnic2 vSwitch0

  12.

  Run the following command to change the ID vlan a vSwitch

  # esxcfg - vswitch - p "VM network 1" - v 10 vSwitch0

  13.

  If you make manual changes to sysconfig, run the following command to restart the network service:

  service network restart

  If you find this helpful please mark some reward points for this.

• Live migration of HYPER-V Server R2 2012

  Hello

  I have a new Hyper-V 2 built node cluster. Storage is presented through SAN. Live-Migration network, network Public, private network and virtual switches-2 VMS-MGMT. These boxes are hardware identical; HP DL580 G7 with a lot of horses. I am running Windows Server 2012 R2 Datacenter Core on each node. My problem is, I validate cluster, and I get no error at all. This is a brand new clean install, but for some reason any I can only migrate from one node to another and not return without having to reboot a node after live migration. I don't know what I'm going? Has anyone already experienced this? A peer of mine installed the same scenario in a different data center and it does exactly the same thing too. Which leaves me to believe it's OS or hardware related?

  Any help will be greatly appreciated!

  Thank you!

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• "No route to host" network problem preventing the installation of RAC

  Oracle Linux: 6.6

  Version Infra grid: 11.2.0.4

  Virtual Box: 4.3.28 (on the Win 7 machine)

  I am installing a RAC 2 nodes in virtual machines created in VirtualBox. But the check cluvfy is a failure for the networks of my Public and private with the error "No route to host" as shown below.

  Ping between two nodes of work with no latency. without password ssh is configured successfully.

  I have a server dedicated DNS (10.194.135.185). nslookups SCAN, Public and VIPs are working properly.

  Search on Google didn't help much. That's why post here

  = The beginning of cluvfy error

  Check: The subnet '10.194.135.0' TCP connectivity

  Source Destination connected?

  ------------------------------  ------------------------------  ----------------

  brcpda178: 10.194.135.178 brcpda178: 10.194.135.178 spent

  brcpda179: 10.194.135.179 brcpda178: 10.194.135.178 spent

  brcpda178: 10.194.135.178 brcpda179: 10.194.135.179 failed

  ERROR:

  GLWB-11850: System call 'connect' failed with the "113" error when running exectask on the node 'brcpda178 '.

  No route to host

  brcpda179: 10.194.135.179 brcpda179: 10.194.135.179 spent

  Result: The TCP connectivity test failed for subnet "10.194.135.0."

  Check: Subnet node connectivity "169.182.16.0."

  Source Destination connected?

  ------------------------------  ------------------------------  ----------------

  brcpda178 [169.182.16.24] brcpda179 [169.182.16.25] Yes

  Result: Connectivity node passed to subnet "169.182.16.0" with one or more nodes brcpda178, brcpda179

  Check: The subnet '169.182.16.0' TCP connectivity

  Source Destination connected?

  ------------------------------  ------------------------------  ----------------

  brcpda178: 169.182.16.24 brcpda178: 169.182.16.24 spent

  brcpda179: 169.182.16.25 brcpda178: 169.182.16.24 spent

  brcpda178: 169.182.16.24 brcpda179: 169.182.16.25 failed

  ERROR:

  GLWB-11850: System call 'connect' failed with the "113" error when running exectask on the node 'brcpda178 '.

  No route to host

  brcpda179: 169.182.16.25 brcpda179: 169.182.16.25 spent

  Result: The TCP connectivity test failed for subnet "169.182.16.0."

  = End of the error

  # This is my network configuration.

  I created 2 virtual adapters to host (Host-only network).

  ipconfig output host (Windows 7)

  Network adapter Ethernet VirtualBox:

  The connection-specific DNS suffix. :

  Link-local IPv6 Address...: fe80::7930:46e8:a531:289% 24

  IPv4 address...: 10.194.135.1.

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. :

  Adapter Ethernet VirtualBox network #2:

  The connection-specific DNS suffix. :

  Link-local IPv6 Address...: fe80::b43f:3255:b3d0:70eb 30%

  IPv4 address...: 169.182.16.1.

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. :

  10.194.135.0 is my Public network-> eth0 in each node

  169.182.16.0 is my private network-> eth1 in each node

  Here is my file/etc/hosts

  [grid@brcpda178 grid] $ cat/etc/hosts

  10.194.135.185 dnsnode185

  # Public IP #.

  10.194.135.178 brcpda178.testenv.com brcpda178

  10.194.135.179 brcpda179.testenv.com brcpda179

  # Private IP #.

  169.182.16.24 brcpda178 - priv.testenv.com brcpda178-priv

  169.182.16.25 brcpda179 - priv.testenv.com brcpda179-priv

  # Virtual IP # 3

  10.194.135.217 brcpda178 - oravip.testenv.com brcpda178-oravip

  10.194.135.218 brcpda179 - oravip.testenv.com brcpda179-oravip

  #127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4

  #: 1 localhost localhost.localdomain localhost6 localhost6.localdomain6

  Here's the network interfaces configuration files in each RAC node.

  Value of GATEWAY in the file/etc/sysconfig/network-scripts/ifcfg-ethn is set to the IP address of the virtual NIC adapter to the host (win7).

  On Node1, node2 has been cloned. Thus, the UUID of eth0 and eth1 remains the same for both nodes. Hope that this is not a problem because HWADDR (MAC ID) is different between the nodes.

  brcpda178 (Node1)

  eth0

  =====

  # cat/etc/sysconfig/network-scripts/ifcfg-eth0

  DEVICE = eth0

  TYPE = Ethernet

  UUID = 2ca3918d-d038-483d-946a-271751aeb11f

  ONBOOT = yes

  NM_CONTROLLED = yes

  BOOTPROTO = none

  HWADDR = 08:00:27:17:91:24

  IPADDR = 10.194.135.178

  PREFIX = 24

  GATEWAY =10.194.135.1

  DEFROUTE = yes

  IPV4_FAILURE_FATAL = yes

  IPV6INIT = no

  NAME = "eth0 system."

  eth1

  ====

  # cat/etc/sysconfig/network-scripts/ifcfg-eth1

  DEVICE = eth1

  TYPE = Ethernet

  UUID = dc9be031-ee5f-4129-9023-9c45f6a282da

  ONBOOT = yes

  NM_CONTROLLED = yes

  BOOTPROTO = none

  HWADDR = 08:00:27:01:FC:38

  IPADDR = 169.182.16.24

  PREFIX = 24

  GATEWAY =169.182.16.1

  DEFROUTE = yes

  IPV4_FAILURE_FATAL = yes

  IPV6INIT = no

  NAME = 'eth1 system '.

  brcpda179 (Node2)

  eth0

  ====

  # cat/etc/sysconfig/network-scripts/ifcfg-eth0

  DEVICE = eth0

  TYPE = Ethernet

  UUID = 2ca3918d-d038-483d-946a-271751aeb11f

  ONBOOT = yes

  NM_CONTROLLED = yes

  BOOTPROTO = none

  HWADDR = 08:00:27:A9:68:39

  IPADDR = 10.194.135.179

  PREFIX = 24

  GATEWAY = 10.194.135.1

  DEFROUTE = yes

  IPV4_FAILURE_FATAL = yes

  IPV6INIT = no

  NAME = "eth0 system."

  eth1

  ====

  # cat/etc/sysconfig/network-scripts/ifcfg-eth1

  DEVICE = eth1

  TYPE = Ethernet

  UUID = dc9be031-ee5f-4129-9023-9c45f6a282da

  ONBOOT = yes

  NM_CONTROLLED = yes

  BOOTPROTO = none

  HWADDR = 08:00:27:05:A5:45

  IPADDR = 169.182.16.25

  PREFIX = 24

  GATEWAY = 169.182.16.1

  DEFROUTE = yes

  IPV4_FAILURE_FATAL = yes

  IPV6INIT = no

  NAME = 'eth1 system '.

  Hello

  This error is usually done to firewall or selinux - but since you have already disabled, I recommend you just do a restart of your two virtual machines as I have explained these mistakes here http://salmandba.blogspot.sg/2015/04/using-cluster-verification-utility.htm

  I also believe that you have also disabled Firewall (not only stopped) by using the command «chkconfig iptables» off
  My installation guide 12 c RAC excavation on Linux 6 Treaty of all the prerequisites that are almost the same for the 11 g RAC installation, please check if you have met all the requirements.

  http://salmandba.blogspot.SG/2015/05/installing-Oracle-12C-RAC-on-Linux-6.html

  Salman

• Network problem ESXI on reviews of CentOS 5.5

  We have dedicated node in HP ProLiant DL120 G7 (ONLINE.NET datacenter in France) with installation 5.5 ESXI and vSphere Clent. In the data store, we have the ISO for CentOS 5 and 6 files in order to create VM customers for the web server application.

  vSphere Client creates the VM on the dedicated node successfully, but we have a problem with the networking, guests of virtual computer cannot access the internet. Settings for the virtual machine networking vSphere client a VMXNET3 adapter with edited manually (provided data center virtual MAC) MAC address and default VM network as network connection option.

  Inside of the virtual machine comments (CentOS 6 minimum), that we have tried to install/etc/sysconfig/network-scripts/ifcfg-eth0 and/etc/sysconfig/network-scripts/route-eth0 according to the tutorial https://documentation.online.NET/en/serveur-dedie/Systemes-d_exploitation/vmware_vsphere_hypervisor_esxi_english

  but still cannot ping external container.

  We have an IP address main and tipping 5 IPs with virutal MAC addresses.

  How to set up the connection?

  Problem solved!

  Here's a solution:

  / etc/sysconfig/network-scripts/ifcfg-eth0

  should have:

  DEVICE = eth0

  BOOTPROTO = none

  ONBOOT = yes

  USERCTL = no

  IPV6INIT = no

  PEERDNS = yes

  TYPE = Ethernet

  NETMASK = 255.255.255.255

  IPADDR #Replace with your IP address

  IPADDR = 195.154. *. *

  #Replace GATEWAY with your GATEWAY IP address

  GATEWAY = 195.154. *. *

  DNS1 = 8.8.8.8

  ARP = yes

  ARPCHECK = no

• Convert script Illustrator cs3 to CS5

  Hello world

  I'm new to illustrator script I made a simple script InDesign before but this the first time that I am ask to create the script for Illustrator.

  We have an old script that will create a report for properties (e.i.: linkedImages, strokeWeights, strokeColors, indents, fonts, etc.) of the illustrator file. The script works in CS2 and CS3, but as most producers use now CS5 and CS6 they ask if we could migrate this script for CS5. The script uses hashtable.jsx to get these properties. CS5 script still has hashstable file or I have to create the script from scratch with using hashtable script?

  
  

  Any suggestion or information on how I could convert the above script is very appreciated.

  
  

  Thank you and best regards,

  -elmer

  OK, scripts in the startup folder will run on opening Illustrator... once. If your script needs to access a specific function in the hashtable.jsx file, you should know where it is and call it whenever he needs... it doesn't have to be in the startup folder, it can be anywhere,

  at the beginning of your script to add

  #include "c:/full path/hashtable.jsx.

• Network Bridge does not work after copying on another system

  Hello

  I use VMware Server 1. I created a Fedora 9 guest operating system. I used bridged networks. I've edited/etc/sysconfig/network-script/ifcfg-eth0 and assigned static IP. It works very well.

  I copied the image to a different system and it turned. But now the networking does not work. It shows as instead of eth0 eth1. change the/etc/sysconfig/network-script/ifcfg-eth0 once again restores the networking. is their anyway to maintain the previous configuration after copying.

  -Arindam

  Hello.

  The movement will probably cause a new MAC address to be generated.  Check out KB 507 and 49 KB for more information on this. Try the supply of machinery, or what is your ultimate goal here?

  Good luck!

• Networking on RedHat 5.5

  Hi all, I think it's a common problem judging by messages on the internet. However, none of the fixes worked for my setup. I have a HP DL 350 G6 server. ESXi 4 running. It has an extra quad NIC n375t, which I installed additional drivers for one is picked up in VMWare. I installed Red Hat Linux 5.5 on it, which has installed without problem. I have a virtual installation running off of the built-in NIC switch. This goes to the console management & the machine virtual linux.

  Machine starts, no error reported. I configured a correct on eth0, default gateway static IP address and mask. However, I am unable to get any access to the LAN or Internet to eth0. The MAC address matches that of E1000 card when checking the configuration settings of the Virtual Machine. TX RX traffic via eth0 is, I can ping the loopback, but still not bring no matter what connection beyond the Virtual Machine.

  All the blogs suggest to change the virtual NETWORK of Machine card MAC address to the same thing as the vmnic0 (the only allow NIC). Having done this during the restart of its give an error of incorrect MAC address on eth0 and disables it. It is by changing the \etc\sysconfig\network-scripts\ifcfg-eth0 file to change the MAC address.

  This should be easy, and I'm sure someone will know a quick fix. But slowly, I'm going crazy. This used to be so easy on ESX 3.5! Any help or advice would be greatly appreciated.

  RJB-

  We have solved the problem on our side. If you have the advanced platform, and you enter the subscription number, you have the possibility during the installation of "Virtualization" (the same screen as the Web, development tools, and clustering).

  There is a problem with Red Hat virtualization running while the server is virtualized. (I opens virtualization configuration is when the server runs as a host, not a guest operating system)

  I reinstalled without virtualization and networking works like a charm.

  I hope this helps!

• How to add the device (eth1) after the command 'neat' calls 'Configure Network'?

  People,
  
  Hello. I want to install 2-node RAC Oracle 11 GR 2 VMPlayer 3 System. The host OS is Windows 7. Oracle Linux 5.6 is the guest operating system. 2 nodes (2 Virtual Machines) are RAC1 and RAC2.
  
  We must create the public IP address and IP private for each virtual computer (RAC! and RAC2). IP addresses public (eth0) connect RAC1 and RAC2 of shared storage. The private IPS (eth1) connect RAC1 and RAC2.
  
  In Oracle Linux 5.6, the command "neat" to the root user calls the configuration of the network (5 tabs) as follows:
  
  Devices | Material | IPsec | DNS | Hosts
  
  In the "Devices" tab, I created the public IP address for RAC1 whose nom_peripherique is etho.
  But I don't know how to add another device 'eth1' in the 'Devices' tab to create the private IP address.
  Thus, the network cannot be implemented.
  
  Can any folk tell me how to add another device (eth1) in the 'Devices' tab after the "neat" command calls "Network Configuration"?

  user8860348 wrote:
  Folk,

  Hello. Thanks much for the reply.

  In the directory "/ etc/sysconfig/network-scripts", there is a file 'ifcfg-eth0"which contain a public IP address.

  But there is no file "ifcfg-eth1" that must be a private IP address.
  What is the reason that there is no device 'eth1' in the 'Devices' tab in the Network Configuration window?
  Do we need to create a file 'ifcfg-eth1 '?
  What should be the content of 'ifcfg-eth1 '?

  Did you create a second NETWORK adapter to the virtual machine?

• Run the script if only for a specific computer: need advice.

  I want to be sure that a group, a people has done a job "within the gates" and that they did not bring pictures under the direction of the House.

  My script works only if they get the name fo PCs.

  I thought to use each computer name (network name), but I couldn't get it from javascript.

  Would be an another way to do it from a photoshop on PC windows7 Pro network script?

  Thank you

  One idea is to run a startup script to run a vbs script to set a variable in Photoshop.

  For example, this script will set a variable 'processorID"with computers processor ID that can be checked using your script: -.

  var processorID = $.getenv('processorID');
  

  vbs...

  strComputer = "."
  Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
  Set colItems = objWMIService.ExecQuery("Select * from Win32_Processor")
  For Each objItem in colItems
  ProcessorID = objItem.ProcessorId
  Next
  Set appRef = CreateObject( "Photoshop.Application" )
  Script =  "$.setenv('processorID','" & processorID & "');"
  appRef.DoJavaScript( Script )
  

  You could blur the vbs code, an example of script to do this is here...

  http://StackOverflow.com/questions/4252419/free-VBScript-obfuscator