Migrate the host ESX to vSphere 4.0 Server 4.1

Similar Questions

• Not able to connect to the host ESX 3.5 by VC so customer VI

  The host ESX 3.5 has been disconnected from the VC, and we are not able to connect customer using VI as well. The virtual machines on the host are running without any problem.

  Got the message when tried to restart/start services of Mgmt. below

  # Service mgmt-vmware restart

  stopping VMware ESX Server management services:

  VMware ESX Server Host Agent Watchdog

  VMware ESX Server host agent

  Starting VMware ESX Server management services:

  Agent Host VMware ESX Server (background)

  Availability report startup (background)/etc/init.d/mgmt-vmware: fork: Resource temporarily unavailable.)

  # Start of Service mgmt-vmware

  From the VMware ESX Server management services:

  VMware ESX servre Agent Host (background)

  Availability report startup (background)

  status of service mgmt-vmware #.

  VMware-pass is stopped

  hostd.log - entries

  /etc/init.d/sshd command failed

  Didn't the /etc/init.d/sshd fork: Resource temporarily unavailable.

  Let us know the fix for this problem other than restarting the host.

  To know how to clean it, please read KB1007887 - defunct cimservera of process on VMware ESX 3.5 hardware management agents run and follow the instructions.

  André

• How to remove the host esx 3.5 virtual Center

  Can't find info on how to do to remove the host esx virtual center.

  How to do?

  THX.

  Right-click on your host in the left pane and click Disconnect and then once it is disconnected you can right click on the host again and click on Remove and which removes the host to vCenter.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• How to get the host ESX DR see replicated Celerra Lun

  Hi guys, Im setting up SRM with 2 x NS20 and ive got regarding the configuration of the LUN on the production storage array, Lun on the storage LUN appropriate to prod/dr esx servers present DR Bay. Ive set up replication and added the DR lun to the esx server, ensuring not to add it as he will write a signature. I've then added the production on the production ESX Server LUNs, added storage which obviously writes a signature on the drive, and with the installation of the replication, I expected to simply issue a new analysis on the DR esx host and do see the data store.

  Am I missing something here? Any help would be appreciated.

  Thank you

  Hello

  "On DR NS ive done exactly the same thing with respect to FS, Lun, target iSCSI and presented to the host ESX DR, ive done a rescan and his picked up the lun 'Read Only', which is being replicated in but the tab of summary in VC, I see that the local VMFS file system and I was expecting to see the replicated LUN listed with the store local data or is this seen only". When SRM changes the properties of Lun during a failover? »

  You will not see the Site recovery volumes listed in data warehouses, unless you do one of two things - a failover in which case the production side will be unalterable and be removed from the list of data on the Production side store while exposing the VMFS data store now read-write on the side of the recovery.

  Or you use the test function in which case that encourage a wink of Celerra temporary writable and it will appear as a data store broken in the list on the side of the recovery VMFS data warehouses.

  However, it seems that you do not see this result, as DR table does not seem to be configured as it should.

  Can the side Production VC communicate with happiness with the Celerra recovery site - IE can launch you a session PUTTY from the Production side VC and connect to recovery side Celerra. Can the recovery side VC do the same thing for the Production side Celerra?

  I guess you get the unknown peer after that MRS. not the discovery of the table that owns about 23% forever and then ends. The only other thing I can think of and am not sure about this as a solution because it is a set of actions that I did of my side of recovery when Celerra is to create a small file system and in a small iSCSI LUN on the side of the recovery of the recovery side Celerra and put it in your recovery ESX cluster side - create a file system VMFS on it and place a Virtual computer in this VMFS file system - this is to check that there are no problems with the ESX host side recovery working with the recovery side Celerra

  My guess would be a thing of IP connectivity - if it's a little strange, if the link between the Production side VC and the recovery side VC has been established successfully

  I'll pass on to a colleague to VMware SRM and see if he has any ideas

  Concerning

  Alex Tanner

• migrate the production esx 4.0 to 5 new hardware esxi environment

  I intend to migrate my production esx4.0 vSphere esxi 5 environment (new hardware) environment. How can I migrate my vms to production that are hosted on esx 4.0 (3 hosts managed by vcenter) to new material, that is to say 3 new hosts running esxi5? I want to leave my production environment intact in case I need to back off because of problems if it is possible? I am aware that:

  «My upgrade VMFS-5 doesn't have a block size of 1 MB.» Why?

  
  Upgrade of VMFS-5 partitions retain the characteristics of the partition of the data store VMFS-3 original, including the block size of the file, size of 64 K subblock, etc.. To take full advantage of all the benefits of VMFS-5, migrate virtual machines to a different data store (s), delete the existing one and re data store - create using VMFS-5".
  so ideally, I want to create a new data store instead of to upgrade and move my VM prod on this.

  What are the options that are available to me? Thank you.

  I wonder if it would make a big difference to save storage space?

  30 years ago I probably would have said it makes a difference, but today, it is probably more expensive (i.e. is not worth spending time) to create a new data store and migrate everything to a few KB.

  André

• NAT network between the host ESX with DVS

  Hello.

  In my test of vSphere 4, I have two ESX hosts. I want to share an IP address between all the virtual machines on these two ESX hosts. In this regard, I have a virtual machine that acts as a NAT router. This virtual machine has two network that is connected to each their own vNetwork Distributed Switch connection. We have a physical NIC (on each ESX host) which has the Internet connection. The other has no physical network connection.

  To test if it works I created a VM test on both ESX hosts. The system works on the virtual machine that is on the same ESX host as the virtual machine that acts as a NAT router is located, but not the virtual machine on the other ESX host. The other VM have no contact with the router and receives no DHCP data.

  Any suggestions? I know I did something wrong because DVS is new to me, but I really want this to work.

  Hello

  That ends up being a vNetwork design more than anything even with vDS. For example, if you have a NAT that works for all your hosts you would then have a NAT virtual appliance such as:

  PSwitch external network <->Teddy <->vSwitch <->vPG <->NAT VM <->vPG <->vSwitch <->Teddy <->network internal pSwitch

  Now the vSwitches in the above can be traditional vSwitches or vDS' the key is that the "seconds" vSwitch must be connected on the same vSwitch on all other hosts, so it has an uplink to a physical switch that is also connected to all other hosts. vDS does NOT lighten your vNetwork is the need of cable to allow the communication of the VM.

  The VM NAT can move from host to host as long as there is communication to this virtual machine on each host on each network in this case, the external network and internal.

  Best regards
  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009

  Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security'VMware vSphere (TM) and Virtual Infrastructure Security' [/ URL]

  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]

  Blogs: url = http://www.virtualizationpractice.comvirtualization practice [/ URL] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://itknowledgeexchange.techtarget.com/virtualization-pro/ TechTarget [url] | URL = http://www.networkworld.com/community/haletky Global network [url]

  Podcast: url = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcastvirtualization security Table round Podcast [url] | Twitter: url = http://www.twitter.com/TexiwillTexiwll [/ URL]

• How to find the host ESX 4.1 SCSI tape drive card information...

  Dear team,

  last night we have installed card scsi tape drive on one of the host to ESX 4.1, just want to know how to find the details of scsi card in ESX 4.1 host, is possible to find via cli or hardware status tab?

  need help on the same.

  concerning

  Mr. VMware

  Hello

  You should find the information you are looking for by entering the following command.

  less/proc/scsi/aic79xx/6

  Kind regards

  Ralf

• Run the host ESX 4.1 in vCenter 5.0

  Hello everyone, I have a simple question.   I am running 4.1 U1 ESX hosts and vCenter 4.1.  I need to upgrade to ESX 4.1 U2.   I know I need to improve my vCenter to match my version of ESX host, but I thought I killed a stone 2 strokes.   I have the license for vCenter and ESX 5.0 but I'm programmed to upgrade next year.   Given that I have to upgrade my vCenter anyway can I go to version 5.0 and run my ESX host on v 4.1 U1 without any loss of functionality?

  I would like to upgrade everything at once, but the company needs me to complete the test first upgrade of the host is not an option at this time.

  Thanks for your help with this.

  Hello

  You shouldn't lose any features with what you described.  Remember however that in one year, you will still need to patch vCenter to upgrade to the latest version 5.x.

  Thank you

  Jeff

• The IP of the host ESX and ESXi console information

  Hi guys,.

  I have a little problem here, we have a script that collects the host Console IP, host name, field info... etc.

  My problem is with the period of INVESTIGATION, because we have a mixed environment of esx3.5, esx4.0, esx4.1 and ESXi4 get the IP of the Console is a bit of a problem.

  If I use the

  $NicInfo = get-VMHostNetwork - VMHost $esxhost. Name
  $newesxhost. VmHostName = $NicInfo.HostName
  $newesxhost. Domain = $NicInfo.DomainName
  {foreach ($cs in $NicInfo.ConsoleNic)}
  $newesxhost. IPAddress = [string] $cs. INTELLECTUAL PROPERTY
  }

  I covers the ESX Console hosts IP info, but all the info of ESXi IP gets missed.

  If I add to the:

  $NicInfo = get-VMHostNetwork - VMHost $esxhost. Name
  $newesxhost. VmHostName = $NicInfo.HostName
  $newesxhost. Domain = $NicInfo.DomainName
  foreach ($cs in $NicInfo. ) VirtualNic | where {$_.name - eq "vmk0"}){}
  $newesxhost. IPAddress = [string] $cs. INTELLECTUAL PROPERTY
  }

  I get the ESXi IP Management IP network, but the ESX hosts to report the vmk0 which is the IP address of vmotion.

  So if anyone can help I'd be very happy.

  Include the HOST party so that you can see what I mean:

  #[int] $Loopctr = 0
  $newesxhost = (@($xml.) (ESXInventory.HOST) [0])
  $newVMPortGroup = (@($xml.) (ESXInventory.VMPortGroup) [0])

  Get-VMHost-location (Get-Cluster-name $cluster. Name) | Sort-Object-unique | % {
  $esxhost = get-view $_.ID
  Write-Host $esxhost. Name
  #if ($Loopctr - gt 0) {$newesxhost = $newesxhost.clone ()}
  $newesxhost = $newesxhost.clone)
  $newesxhost. MemberOfCluster = $cluster. Name
  $newesxhost. Name of the vendor = $esxhost. Summary.Hardware.Vendor
  $newesxhost. Model = $esxhost. Summary.Hardware.Model
  $newesxhost.os_version = [string] $esxhost. Config.Product.Version
  $newesxhost.os_build = [string] $esxhost. Config.Product.Build
  $newesxhost.os_caption = [string] $esxhost. Config.Product.FullName
  $newesxhost. MemorySize = [string] $esxhost. Summary.Hardware.MemorySize
  $newesxhost. CpuModel = $esxhost. Summary.Hardware.CpuModel
  $newesxhost. CpuMhz = [string] $esxhost. Summary.Hardware.CpuMhz
  $newesxhost. NumCpuPkgs = [string] $esxhost. Summary.Hardware.NumCpuPkgs
  $newesxhost. NumCpuCores = [string] $esxhost. Summary.Hardware.NumCpuCores
  $newesxhost. NumCpuThreads = [string] $esxhost. Summary.Hardware.NumCpuThreads
  $newesxhost. NumNics = [string] $esxhost. Summary.Hardware.NumNics
  $newesxhost. NumHBAs = [string] $esxhost. Summary.Hardware.NumHBAs

  $NicInfo = get-VMHostNetwork - VMHost $esxhost. Name
  $newesxhost. VmHostName = $NicInfo.HostName
  $newesxhost. Domain = $NicInfo.DomainName
  foreach ($cs in $NicInfo.VirtualNic | where {$_.name - eq "vmk0"}) {}
  $newesxhost. IPAddress = [string] $cs. INTELLECTUAL PROPERTY
  }

  $VMPortGroup = get-VirtualPortGroup - VMHost $esxhost. Name
  
  {foreach ($vpg to $VMPortGroup)
  Write-Host $vpg. Name
  $newVMPortGroup = $newVMPortGroup.clone)
  $newVMPortGroup.Name = $vpg. Name
  $xml. ESXInventory.AppendChild ($newVMPortGroup) > $null
  }

  $xml. ESXInventory.AppendChild ($newesxhost) > $null
  #$Loopctr += 1

  /regards

  Why you do not include a test that check if the host's ESX or ESXi?

  Something like that

  $esx = Get-VMHost MyESX
  
  $NicInfo = Get-VMHostNetwork -VMHost $esx 
  
  $newesxhost.VmHostName = $NicInfo.HostName$newesxhost.Domain = $NicInfo.DomainName
  
  if($esx.Extensiondata.Config.Product.ProductLineId -eq "esx"){    foreach ($cs in $NicInfo.ConsoleNic ){        $newesxhost.IPAddress = [string] $cs.IP    }}else{    foreach ($cs in $NicInfo.VirtualNic |where {$_.name -eq "vmk0"} ){        $newesxhost.IPAddress = [string] $cs.IP    }}
  
  $newesxhost
  

• How to get the MAC address for the physical NETWORK adapter of the HOST ESX (vmnic0/vmnic1)

  I can recover physical NIC details for the server HOST ESX, but MAC is empty... How can I get?

  Thank you/HKS

  $net = get-VMHostNetwork - VMHost myServer.domain.net

  $net | FC

  class VMHostNetworkInfoImpl

  {

  VMKernelGateway = 166.12.113.1

  ConsoleGateway = 166.12.113.1

  ConsoleGatewayDevice = vswif0

  DnsAddress =

  [

  169.40.0.2

  169.40.0.1

  ]

  DnsFromDhcp = False

  DnsDhcpDevice =

  DomainName = domaine.net

  Host name = hostname1

  SearchDomain =

  [

  EU.hedani.NET

  ]

  PhysicalNic =

  [

  class PhysicalNicImpl

  {

  BitRatePerSec = 1000

  FullDuplex = True

  WakeOnLanSupported =

  ID = key - vim.host.PhysicalNic - vmnic0

  DeviceName = vmnic0

  Mac =

  DhcpEnabled = False

  IP =

  SubnetMask =

  }

  class PhysicalNicImpl

  {

  BitRatePerSec = 0

  FullDuplex = False

  WakeOnLanSupported =

  ID = key - vim.host.PhysicalNic - vmnic1

  DeviceName = vmnic1

  Mac =

  DhcpEnabled = False

  IP =

  SubnetMask =

  }

  ]

  VirtualSwitch =

  [

  class VirtualSwitchImpl

  {

  Key = key - vim.host.VirtualSwitch - vSwitch0

  Name = vSwitch0

  NumPorts = 128

  NumPortsAvailable = 105

  NIC =

  [

  vmnic1

  vmnic0

  ]

  MTU =

  }

  class VirtualSwitchImpl

  {

  Key = key - vim.host.VirtualSwitch - vSwitch1

  Name = vSwitch1

  NumPorts = 64

  NumPortsAvailable = 56

  NIC =

  MTU =

  }

  class VirtualSwitchImpl

  {

  Key = key - vim.host.VirtualSwitch - vSwitch2

  Name = vSwitch2

  NumPorts = 64

  NumPortsAvailable = 64

  NIC =

  MTU =

  }

  ]

  ConsoleNic =

  [

  class HostConsoleVirtualNicImpl

  {

  PortGroupName = Service_Console_VLAN1

  ID = key - vim.host.VirtualNic - vswif0

  DeviceName = vswif0

  Mac = 00:50:56:4 c: 1 d: 3B

  DhcpEnabled = False

  IP = 111.11.111.11

  Subnet mask = 255.255.255.0

  }

  class HostConsoleVirtualNicImpl

  {

  PortGroupName = Service_Console_ISOL

  ID = key - vim.host.VirtualNic - vswif1

  DeviceName = vswif1

  Mac = 00:50:56:4 d: 88:87

  DhcpEnabled = False

  IP = 10.0.0.241

  Subnet mask = 255.255.255.0

  }

  ]

  VirtualNic =

  [

  class HostVMKernelVirtualNicImpl

  {

  VMotionEnabled = True

  PortGroupName = Vmotion_VLAN1

  ID = key - vim.host.VirtualNic - portgroup3

  DeviceName = portgroup3

  Mac = 00:50:56:65:04:56

  DhcpEnabled = False

  IP = 166.12.113.72

  Subnet mask = 255.255.255.0

  }

  ]

  }

  get-vmhost | % {(get-view $_.id).config.network.pnic} | select Device, Mac
  

  http://www.vmwarescripting.com

• mutex slow performance in windows xp on the host ESX 5 prompt

  I've done a few consumer casual producer marks written in C with visual studio 2005 on dual core 2 ghz cpu, with processor type and identical win xp professional o.s., it seems to me on ESX, execution mutex, events and corresponding waitforsingleobject is 1/10th to 1/2 the speed on the physical machine, Windows 7 instead the performance is about half of the corresponding physical machine I was wondering if anyone else noticed, this is perhaps due to how mutex/criticism sections/events/semaphores are emulated in the ESX binary translation, there are all the settings of windows xp 32 bits comments under ESX 5 to allow especially stimulate the sync speed of process/thread to make it similar to a physical machine may?

  I am attaching a small test project for vs 2005 in case anyone could take the trouble to try and compare the pure speed of physical synchronization primitives and ESX especially if in win xp there is a penalty of macroscopic speed or maybe I did something wrong as I ran the test on an overloaded perhaps ESX.

  gf111 wrote:

  Is it possible to wake up another process in win xp without incurring TPR registry bashing?

  I do not know.  It is not clear to me why Windows wants to change the TPR in the first place.  The TPR is to block external interruptions, and I see not why Windows would change the external interrupts are blocked, according to what level process user is active.

  I noticed that windows 7 synchronization is much faster on the same ESX with FlexPriority probably not activated, likely due to 'Lazy TPR', which I believe has been implemented in o.s. later than xp, so I guess that the more realistic prospect is to go with win 7, given I don't think that in my particular environment , I'm working on they would be willing to risk life and limb with potentially unstable FlexPriority bios patcher, has taken the fact that xp is end of life taken into charge anyway, but thanks for giving me a clue what may happen anyway.

  Windows XP 64-bit is another option.  He always denigrated on the TPR, but uses instead of MMIO CR8. (AMD hotfix did the same thing with an ISA AMD extension that allows the code to 32-bit access CR8.)

  Note also that FlexPriority is not a panacea.  It can reduce the cost of a TPR of 2000 update ~ cycles to ~ 400 cycles, but it is still far from what it costs in native mode, which is of ~ 2 cycles.

  Binary translation, TPR updates are rather cheap, but BT has its own performance issues.

  Your Windows XP guest running with binary translation or hardware-assisted virtualization?  You can check the file for 'HV Settings' vmware.log know.

• vCenter Agent does not update the host esx

  After the Victoria Cross to vCenter4, I got a message from vCenter saying the 'update cannot the specific host... ". »

  Is there anyway that I can check the version to ensure that it is the match with my vCenter and how do I update this please.

  Thank you

  You can connect to the host using ssh and run the command as root to obtain the vpxa version: "rpm - qa | grep vpxa.

  Sandeep-

• How to restart a service on the host esx with vi toolkit

  It is possible to restart the services esx (such as syslogd, hpasm hpsmhd) via a script Powershell uses the VI API?

  I have a powershell script that calls plink.exe to do, but I'd rather not use plink.

  As far as I know, there is no such API.

  There is the Start-VmHostService cmdlet, but it's only for a very limited set of services (ntpd, sshd, vmware-vpxa).

• HP MSA2324i, new volume / LUN added, cannot be seen by the host ESX 4.1 (fine old LUN work)

  Hello

  I have a vSphere Essentials Plus 4.1 cluster that is connected to 2 x bays HP MSA2324i SAN, we have 2 x hosts and both can see current volumes / LUNS absolutely perfect (vMotion and migration of VM offline all work as expected). I'm starting a consolidation project virtual disks / volume of the San 2 x, however a new volume I created on a network SAN cannot be seen by the other host.

  The new volume has been implemented exactly like the others, but of course with a unique logic for mapping unit number explicit, but when scanning the iSCSI HBA the new LUN is never found :-(

  I was wondering if others have had also this happens to them and know why this may be implemented?.

  (This is a company that I joined, it's my third week, and that they had also no VMware subscription on their reunification since 2012, otherwise I would be to connect a call to technical support of VMware, by train to get the sub upwards and running)

  OK I think that might be the cause, I came across this recently maximum LUN ID is 255, change the logic unit to a number smaller than 255 ID number and try again, let us know how you go!

  vM

  -----------------------

  VCAP-DCD / VCAP-DCA / VCP-CLOUD / VCP - DT / VCP5 / VCP4

  -----------------------

  vMustard.com

• Detect the host ESX (redux) version

  Hello

  We use a script that automatically installs the VM tools on our VMS invited when the OS is installed. We are now mixing our ESX hosting environment so we also well ESX3.5 and ESXi4.0 hosts. Each of these hosts require versions of VM Tool on their customers. I need a way to determine which version of tools to install based on the version of ESX VM client runs on.

  I've seen other threads on this and suggested using the date of the BIOS, but I'm not real keen on this approach.

  What I found in our environment is the "Device Instance path" or "The device Instance ID" of different NIC appear compatible subprovider IDs that begin with \3 when it is hosted on ESX3.5 and \4 or \FF when it is hosted on ESX 4.0

  i.e.

  ESX 3.5 hosted vm - NIC device Instance path = PCI VEN_8086 & DEV_100F & SUBSYS_075015AD & REV_01\3 & 2B8E0B4B & 0 & 88

  ESXi 4.0hosted vm - NIC device Instance path = PCI VEN_8086 & DEV_100F & SUBSYS_075015AD & REV_01\4 & B70F118 & 0 & 0088

  Note the key differentiating field is immediately after the second "\".

  Anyone have any ideas if this logic will hold up over time?

  Hello

  I wouldn't count on that, but if it works now, go ahead. It may not be the same as we go along.

  However it is a pretty good test 'red pill '. The virtual hardware is very revealing and it's trivially easy to determine the version of ESX, the virtual machine is hosted using red pill techniques.

  Best regards
  Edward L. Haletky VMware communities user moderator, VMware vExpert 2009

  Now available: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security'VMware vSphere (TM) and Virtual Infrastructure Security' [/ URL]

  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]

  Blogs: url = http://www.virtualizationpractice.comvirtualization practice [/ URL] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://itknowledgeexchange.techtarget.com/virtualization-pro/ TechTarget [url] | URL = http://www.networkworld.com/community/haletky Global network [url]

  Podcast: url = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcastvirtualization security Table round Podcast [url] | Twitter: url = http://www.twitter.com/TexiwillTexiwll [/ URL]