Migrating data with external box HD

Similar Questions

• How to migrate data with the Mavericks (MacBook) Setup Wizard to El capitan (MacBookPro)

  Hello

  A few days ago, I bought a refurbished MacBook Pro (El Capitan) and intended to migrate the data from my old MacBook (Mavericks) backup via Time Machine. Annoyingly, the migration wizard does not recognize the HD. He's looking for and search, the wheel turns and turns...

  Research on the web it seems to be a common problem. I also read that you can also use the Setup Wizard to migrate all data and programs? Can someone help me with this and tell me how to do? Thanks in advance!

  Yes, the Setup Wizard is the way to go. But you have to use the first time you start your new Mac. So, if you have not done too tight on the new, re - format the hard drive and use the Migration Wizard when you are prompted.

  Move your content to a new Mac - Apple Support

• I'm trying to migrate data from a server to a new one with the file permissions of the files of users and records lost.

  original title: robocopy

  I'm trying to migrate data from a server to a new one with the file permissions of the files of users and records lost. So far, that's what I did, I used \\server1\share \\server2\share/sec /mir robocopy and robocopy \\server1\share \\serve2\share/e/s /copyall. It seams like they copied all files with the permissions of the user for the files, but not files. For example, if a user makes a folder with the files in the folder appear them have permissions appropriate for them but not the root folder or subfolders, they did... How can I fix this and what is the difference between / s /mir and/e/s /copyall?

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• How to migrate all Windows data with attributes / privileges

  I need create a new vmdk and transfer all the data to a physical windows, because I want to test.

  What software can I use to migrate all the data with attiributes and privileges?

  WinSCP? Veeam?

  Kind regards!

  If you have found this information useful, please consider awarding points to 'Correct' or 'Useful'*.

  Attach your vmdk on a virtual Windows machine and use robocopy.

  If the two machine Windows are in the same domain, you will have no problem with permissions and attributes.

  André

• external table data with several locations pump

  Hello
  I'm on:
  Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - 64biit
  SunOS 5.10
  
  I am trying to create a table of data pump external at the same time, with the location of the files previously created using pump.
  This is the same as the example given in step 10-13 here:
  http://docs.Oracle.com/CD/B19306_01/server.102/b14215/et_dp_driver.htm#i1007502
  
  But when I do this and select all the lines in the resulting table, I get the error:
  
  ORA-29913: error in executing ODCIEXTTABLEFETCH legend
  ORA-29400: data cartridge error
  KUP-11011: file / < filepath > sys_tables.dmp is not valid for this load operation
  ORA-06512: at "SYS." ORACLE_DATAPUMP', line 52
  
  Can anyone help?
  Here is a script of what I do...
  
  
  create the directory message_archive_dir as ' / your/path/directory "; -change default directory
  -chmod 777 your way
  
  create the sys_tables table
  external organization
  (type ORACLE_DATAPUMP
  THE DEFAULT DIRECTORY MESSAGE_ARCHIVE_DIR
  LOCATION ("sys_tables.dmp"))
  AS
  Select object_id, object_type
  of object
  where owner = 'SYS '.
  and object_type = 'TABLE '.
  and rownum < 11;
  
  create the table sys_indexes
  external organization
  (type ORACLE_DATAPUMP
  THE DEFAULT DIRECTORY MESSAGE_ARCHIVE_DIR
  LOCATION ("sys_indexes.dmp"))
  AS
  Select object_id, object_type
  of object
  where owner = 'SYS '.
  and object_type = 'INDEX '.
  and rownum < 11;
  
  Select * from sys_tables
  Union
  Select * from sys_indexes;
  
  -all 20 rows returned!
  -now I combine the two dmp files in a single table...
  
  create the table sys_objects
  (
  object_id NUMBER (14).
  object_type VARCHAR2 (30)
  )
  EXTERNAL ORGANIZATION
  (
  TYPE ORACLE_DATAPUMP
  THE DEFAULT DIRECTORY MESSAGE_ARCHIVE_DIR
  LOCATION ('sys_indexes.dmp', 'sys_tables.dmp')
  );
  
  Select *.
  of sys_objects
  where rownum = 1;
  
  -ok returnes one line (one of the dmp files work)
  --Choose so all lines...
  
  Select *.
  of sys_objects;
  
  ORA-29913: error in executing ODCIEXTTABLEFETCH legend
  ORA-29400: data cartridge error
  KUP-11011: file / < filepath > sys_tables.dmp is not valid for this load operation
  ORA-06512: at "SYS." ORACLE_DATAPUMP', line 52
  
  Can you see what I'm doing wrong?
  
  Any help is greatly appreciated!
  Thank you.

  user9969845 wrote:
  ... Etc...

  TYPE ORACLE_DATAPUMP
  THE DEFAULT DIRECTORY MESSAGE_ARCHIVE_DIR
  LOCATION ('sys_indexes.dmp', 'sys_tables.dmp')

  Combination dump files

  Files dump populated by different external tables can all be specified in the LOCATION of another external table clause. For example, data from different databases can be unloaded in separate files, and these files can then be included in an external table defined in a data warehouse. This provides an easy way to aggregate data from multiple sources. The only restriction is that the metadata for all external tables is exactly the same. This means that the game characters, time zone, schema name, table name, and column names must match. In addition, the columns must be defined in the same order, and their data types must be identical. This means that after you create the first external table you must remove it so that you can use the same table name for the second outer table. This ensures that the metadata in two dump files is the same and they can be used together to create the external table even.
  8 2

• Back up my data with installation DVD

  I want to transfer my data to an external with installation DVD drive because my Mac OS isn't bootable anymore because of the sierra of mac os. So I'll do a new install of snow leopard on my macbook late 2009. Does anyone know how to transfer my data in my external drive across the disc of the DVD Installer prior to installation of Snow Leopard sanitation? Somone told me to do it this way, but I don't know how.

  I recommend strongly against from any attempt of recovery/reinstallation without a valid (and verified) backup on a different disk. As you are still able to boot the system with the installation DVD, you can

  • use Disk Utility on the installation DVD to create a full backup of your internal drive to an external
  • copy /Applications and /Users to an external drive (which should focus on 'all' critical data)

  Then comes to an attempt of resettlement.

  You can restore your data after the installation of the operating system. First make a note of bookmark, password or registration required by your system.

  Perform a full backup with time machine, then restart with your installation dvd, then reinstall the operating system

  When Setup restarts, you can restore your data with the migration wizard.

  When possible, you should do a clean install with 3rd party applications and drivers HW until the migration may or may not be compatible with the older operating system and removes the possibility of corruption of preference.

• try to migrate data from a macbook pro to another using thunderbolt cable.  Cable is not recognized, why?

  replace a 3 years old macbook pro with a new - try to migrate data using thunderbolt cable.  When the cable is plugged into laptops, its not known how to fix this?

  The two Macs have a Thunderbolt port?  The old Mac may have a mini displayport that is used for video only, but accepts a Thunderbolt since video Jack mini displayport is a subset of Thunderbolt.

  In addition, you use a bolt of lightning and not a cable mini displayport? They look alike at first sight, but Thunderbolt should have an icon of lightning on each card.

  Also, if you look in System profiler

  OS X: about system information and System Profiler - Apple Support

  under lightning shows as being connected?

• Using Migration Assistant with no display

  I got my MacBook mid-2010 (2.4 GHz, 4 GB RAM, OS X El Capitan) for 2 years.

  It splits into two somewhere within 2 years.

  The MacBook was still usable, but it had to be on a desk. The screen was completely separate from the base. It still worked.

  I woke up a few days ago to find that someone had cut the display cable holding the MacBook set and turn on the screen.

  I bought an early-2011 13 "MacBook Pro to replace the dead MacBook. (Yes, I buy old Mac because the news is so expensive).

  Old Mac has been saved semi regularly, so I have an old backup to use for the new Mac. The problem is that just before the death of the former Mac, I downloaded a bunch of stuff that has not been saved. I really want the files that have not been backed up on my new MBP.

  Can I use Migration Wizard with an Ethernet cable and transfer of data from one, or Migration Assistant must be running on old Mac as well?

  I tried to connect (I'm sure that the computer is still running, it doesn't simply have a display) on the old Mac, plug the backup drive and I hope to do a backup hourly, but Time Machine did not only.

  Any suggestions would be GREATLY appreciated.

  If you use Ethernet or a wireless network to transfer data, Yes. If you can not download the files and file-sharing has not been activated on the old Mac, you must either get fixed display or put its internal drive in a closed Chamber.

  (143074)

• The GPS data with other analyzed data record

  Hello!

  I am a new user of DASYLab and not very good with coding, so please bear with me! I try to record (timestamp, latitude, longitude) already analysed GPS data with other data (accelerometer, etc.) in the same. DDF file. Right, GPS analysed is now sent through a series of three demultiplexers for each signal and only 1 of 16 channels, reducing the size of the output data. This data is then saved in a. The CAD file. Other data on average, recorded in one. DDF file, then saved another. The CAD file. We used to compare the data from the GPS and other devices by comparing timestamps.

  I would like to save all data to a file, either. DDF of. CSA (.) DDF would be preferable).

  When I try to add more channels in the. DDF save the module after the demultiplexer black box and GPS data to it, I get an error saying "the data to an entry in this module are the wrong type." I also receive this error when trying to send the data GPS to the. CSA Save module. I learned that this means that the size of the files is not the same of this thread. My question is, how can I make sure that the data have the same characteristics of time so I can save to the same file?

  If you need more information I would be happy to provide it, I apologize if I have something important to go.

  Thanks for reading,

  etdiv

  That's what I needed. Your time is the driver. In the RS232 input module, click the Options button.

  Select the measurement of output value, and then click the button on the time Base and select sync/time Base driver.

  That should allow you to write to the DDF file.

  

• With a sampling of the data with DAQMX, error-200279 occurs when making 2d array dbl

  Hello

  I did a system of simple analog voltage with DAQMX data acquisition.

  It is made for reading of capacitance, where output capacitance value out of a circuit in the periodic voltage signal.

  What I want is to get data from four capacitors simultaneously through four channels, using samples n n (dbl 2d).

  The structure of my VI is almost similar with examples of continuous sampling of voltage in LabView, with the exception of a few other calculations in the loop.

  And for the synchronization of the trigger, I've corrected the edge of release with the external signal from the capacitance reading circuit.

  Version no. 1 has a channel for data input voltage. Version n ° 2 has four channels for the input data.

  While ver.1 can get accurate reading of four capacitors circuit data each (a single channel at a time),.

  ver.2 acquires four channels of data, with a single thin data channel, all the others were wrong.

  I saw a 200279 error occur in the DAQMX read part 2d dbl, so I tried increasing the buffers by changing the sampling frequency or the number of samples, but it wasn't everything.

  I rose for most of the forums with the 200279 error, but the solution would not work on mine.

  Anyone can find the problem? I will attach my screws it may include a bit of Korean language, but most of them are in English, shouldn't be too hard to recognize. Sorry for the inconvenience.

  Oh I forgot, my DAQ is NI USB-6259, and it works in Win XP sp3 and LabView 8.6.

  Thank you.

  Hello Azurenight,

  The 6259 is a DAQ card of the M Series Multiplexed, which means that it is not possible to sample each signal at the same instant, rather the channels are all sent through the ADC even and must be sampled in order. More information on this can be found here:

  LabVIEW Help: Multiplexing compared with simultaneous sampling

  http://zone.NI.com/reference/en-XX/help/370466W-01/mxcncpts/multisimulsamp/

  It may still be possible to get the data you need with the card you have - could you give more information about the maximum eligible period between samples on different channels?

  If you require * real * simultaneous sampling, you will probably need different hardware.

  Kind regards

• Almost any time I use the usb climb on my computer (with flash or ipod players) it freezes and crashes windows. I am up to date with drivers with Microsoft and HP, what can I do to stop this?

  I have no problem with the usb drives but in recent times, this happens all the time.  I can go into Device Manager and uninstall my usb drivers and allows that, sometimes, but it's a temporary solution.  I am up to date with drivers with Microsoft and HP, what can I do to stop this?

  Hello

  You can try to use your boot USB storage device and check if that helps. A clean boot helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot. http://support.Microsoft.com/kb/929135  
  (1) perform the clean boot
  i. Click Start, type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  II. in the general tab, click Selective startup.
  III. under Selective startup, clear the check box load startup items.
  IV. click the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  v. click OK.
  VI. When you are prompted, click on restart.
  VII. after the computer starts, check if the problem is resolved.

  (2) enable half the services
  (3) determine whether the problem returns
  (4) enable half of the startup items
  (5) determine if the problem returns
  (6) repeat the steps above until you find out which program or service is causing the issue
   
  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.
   
  Note: Please make sure that the computer is configured to start as usual by following step 7 of article http://support.microsoft.com/kb/929135 .

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  (i) click Start, type msconfig.exe in the start search box and press ENTER. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  (II) on the general tab, click the Normal startup option, and then click OK.

• Message: "the Security Center service cannot be started. I am running Vista, fully up to date with AntiVirus & Anti Malware, & others. Unable to change the center of security of people with DISABILITIES.

  Message: "the Security Center service cannot be started. I am running Vista, completely up-to-date with Avira AntiVirus, Malwarebytes - Anti-Malware, MS/scans of Windows Security Center (for example MS Fix It programs Center), etc. No Malware has been found. Despite me trying to re - set the Security Center using start > Services > SecurityCenter > change to "Automatic (delayed start)" people with disabilities > start > output the re-creation is not the owner and I'm back with no security - with the same message as the original. I spent hours trying to deal with this. There is no known new applications/programs, and the problem started about 3 days ago. Help requested - thanks. JohnG - Sydney

  Hello

  ·         Are you can change the Security Center service parameter by using a different user account on the computer?

  I suggest you to make sure that Windows Defender is running. Follow the below mentioned articles and check.

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: If the method above is not enough, then I suggest refer you the link try the steps and check if that helps:

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

   

  Note:

  You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an upgrade on the spot.

  If you are using the original computer and the new laptop image, you will need to purchase a product key to activate the copy of windows installed on the laptop.

  Hope the information is useful.

• If you use network storage, configure ASM disks with external redundancy groups

  Hi Experts,

  If you use network storage, configure ASM disks with external redundancy groups. Don't use groups of Oracle ASM failure. Oracle failure groups consume cycles additional CPU and can run in unpredictable ways after suffering from a disk failure. When you use external redundancy, disk failure are transparent to the database and do consume no additional database CPU cycle, because it is discharged on storage processors.

  This does not mean

  • RAID 1 + 0 for diskgroup + REDO1
  • RAID 1 + 0 for diskgroup + REDO2
  • RAID 5 for diskgroup + DATA
  • RAID 5 for diskgroup + FRA

  Is this one suggested, the recommended best practices for oracle on VMWARE?

  
  

  Thank you and best regards,

  IVW

  
  

  Hello

  You can check the storage analysis as well...

  http://www.Dell.com/downloads/global/solutions/tradeoffs_RAID5_RAID10.PDF

  discussion of the Oracle

  https://asktom.Oracle.com/pls/asktom/f?p=100:11:P11_QUESTION_ID:359617936136

• System of records of documents & settings migrated to HD external backup. Is no longer on the C: drive. How to restore to the C: drive?

  PC switched on and I tried to open outlook.  Received the message:
  The path specified for the file G:\Documents and Settings\Ray Bush\Local Settings\Application Data\Microsoft\Outlook\archive.pst is not valid.
  Known as the G: drive is a disk external hard Lacie to be used for back up, although it has been used to store data of previous Windows XP/Office 2007 extracted from the HD system crashed.
  When the above message has been received, the G: drive was not connected. Once it has been connected, archive.pst became available.
  It seems that the Documents & Settings folder system has migrated to the external hard drive backup and is therefore no longer on the C: drive, or at least I can see it there.  Can I just drag and drop the folder Documents and Settings of the G: drive system into the c: (about 750MB)?
  How to restore to the C: drive without doing something drastic is going to lose the settings and configuration?  Why what happened?  Can I prevent that from happening in the future? Is there a conflict between Lacie 500 Gb external SSD and internal Intel 520 Series 120 GB SSD SATA3?
  NEW SYSTEM DETAILS (1 WEEK):

  Intel Core i7 3770 3.4 GHz CPU.  Intel DZ77BH - 55K motherboard.  Kingston 32 GB (8 x 4 GB) DDR3 1600 MHz Ram.  Intel 520 Series 120 GB SATA3 Solid State Drive (MB/s, MB/s W:520 R:550).  Toshiba 2 TB hard drive.  Samsung 22 X dual layer DVD - RW. External hard drive: Lacie Rikiki USB 3.0 500 GB. Windows 8 (64-bit) Office Professional 2010.

  Hello

  Win 7 and Win 8, Documents and Settings is a folder hidden, locked, unlike XP.

  Documents, videos, photos and etc are now included in the C:\Users\User name, and that's where your installed programs will send them.

  You can change their default location, and your software usually sends to the new location because of the way it is redirected.

  I don't think anything has moved physically now that I re-read your post.

  You say the keyword but... it has been imported into the new perspective.

  When a program is something important, is usually not a physical copy of the file. It basically accesses its location of origin, as if the imported file is just a shortcut to the original.

  Your Outlook was simply looking for the file to its actual location through the 'shortcut '.

  Most all programs have an OPTIONS, PREFERENCES, or SETTINGS button somewhere.

  Search through the links at the top of File, Edit, help, etc. It should be in one of these if ut doesn't have its own icon... a gear, for example.

• install Oracle 12 c and migrate data from 9i to 12 c on Solaris

  HI: this is a primary control to check IAM step by step.  I need to migrate the server Oracle 9i (Solaris) to 12 c (Solaris) to the customer request. I have the instruction of installation YES from the team, the draft plan is:

  1. install Oracle 12 c binary on Solaris Server

  2 exp/imp, method to move data to 12 c 9i.

  Should I create a database "empty" by script until I use the exp/imp method to migrate data from 9i?  Or, is it better to use the option 'create the single database instance' in YES during the installation of 12 c, then exp/imp?  How about the "plug-in database" or the "CBD/PDB' concept to 12 c?  It's still new and I am not master familiar with it, that I have to use all "CBD/PDB' 12 c or not?

  Any problem that I need to know?

  Thank you very much!

  You have your point of disagreement, but it is the best approach of guys Upgrade Oracle, google for Mike Dietrich blogs on updates. And your concern that make upgrades does not allow you to practice, well, you could easily make a few tests on my upgrade on a test environment, I really don't agree with your point here...

  Sorry - but I agree with the ground.

  Anyone who still uses 9i has some questions SERIOUS architecture dealing with totally outside the DB and data. There is just too much features auxiliary available (e.g., ASM, GRID, EM) which did NOT exist in 9i or substantially changed.

  It is also a non-starter, IMHO, not to recommend as an upgrade to 11g without even knowing the 9i version that uses OP. A direct upgrade to 11g is NOT possible since the first versions of 9i. So if such a version uses OP they couldn't make a direct upgrade anyway. They will need first to upgrade to the last version 9i and then level it to 11g. Then, they should adapt to 12 c.

  Then you must take account of the need for BACKUP:

  1. PRIOR to starting to do something

  2. AFTER the upgrade to 9.2.04

  3. AFTER the upgrade to 11 g

  4. AFTER the upgrade to 12 c

  Compare that to the approach of that ground is recommended to use export/import. There is NO need to save the source DB at all since the process will NOT change. Simply a backup after upgrading to 12 c.