Migration of ACS for Windows 4.1 to ACS SE 4.2?

Hello

We currently have GANYMEDE + running on ACS 4.1 for Windows.  We want to replace this unit by ACS SE 4.2 (device).  Is it possible to backup/restore the database of the ACS for Windows 4.1 directly to the ACS SE 4.2?  Or requrie level of ACS software version?  Please notify.

Thank you.

Advertisement

Yes, it's quite valid; This new feature has been integrated in 4.2 ACS. You can not, however, restore 4.1 ACS in the last ACS 4.2.1.

Once you have updated 4.2 ACS, ACS 4.2.1 can restore from ACS 4.2...

For ACS 4.2:

http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2/installation/guide/solution_engine/upgap.html#wp1173975

For ACS 4.2.1:

4.2.1 CSCsz96936 to remove the option restore 4.1 db. To support the restoration of 4.2 db

HTH,

Please note the useful messages!

Tags: Cisco Security

Similar Questions

  • migration of presets for Windows (LR2) to Mac (LR3)

    Is there an easy way to get all over the web, develop export and ftp presets to the new platform?

    Thank you

    Braden

    Braden,

    You should be able to do the following:

    (1) on your PC

    • Open LR
    • Edit/Preferences
    • Presets Tab
    • Show Lightroom Presets folder
    • Copy all files (with the exception of Preferences) on your Mac

    (2) on your Mac

    • Open LR
    • Edit/Preferences
    • Presets Tab
    • Show Lightroom Presets folder
    • Copy the folders of your PC (with the exception of Preferences) in there

    Note that the file preferences (s) is (are) not cross-platform!

    Gossweiler beat

    Switzerland

  • Migrate from ACS 3.3.2 SE to 4.2.1 for Windows

    Hi all

    Disclaimer

    I know that the two platforms/versions are dinosaurs and we should be upgraded to something more recent like ACS 5.x.  However, I am consultant and is not part of the decision to make this migration.  I've just loaded to run.  The customer going to ISE and purchased in one of their regions.  However, this specific pair of ACS servers provide services GANYMEDE + then they will be around for some time.

    Problem

    I'm contemplating how to for migration.  There are about 30 local users and more than 2000 devices.  There is integration of ads through a pair of remote agents.  We want to entry a sweet/new configuration as opposed to a full backup and restore so cleaning may occur on the current arrangements of 8-10 years.  So, the best-case scenario is that I have set up new devices (v4.2.1) by hand and import users and network devices.

    If I wanted to do, how I'd go to export only the devices and users from the 3.3.2 engine solution?

    I thought to reproduce the current 3.3.2 install on a v3.3.2 to install windows then upgrading the windows temp install to 4.2.1 and replication only users and groups to the 4.2.1 new platform but I have access to old media.

    Any ideas would be appreciated.  Thank you.

    The best would be to install v3.3.2, reproduce the configuration and it 4.2.1.15 in path/procedure to upgrade next since you do not have access to OLD media. You can import users and devices using the RDBMS feature.

    To export devices network of ACS 3.3.2 engine solution. Go to network setup > Search > maintains the search that is default parameter to search the entire. Press search. There will be a 'Download' option that will appear in the left corner of the search results. Click on save this list.

    This list will include,

    -Name

    -IP address

    -Type

    -Name NDG (if applicable)

    NOTE: This will not contain customer AAA Shared Secret keys have

    Once the devices are exported, you can import this file to ACS for windows.

    http://www.Cisco.com/en/us/products/sw/secursw/ps5338/products_tech_note...

    You may not be able to export the ACS SE users. You may need to manually create with the new passwords.

    Kind regards

    Jousset

    ---

    Posted by WebUser Jatin Katyal of the Cisco support community App

  • Restore the backup on ACS for Windows 4.2.0.124

    Hello

    According to the Migration Guide, I took the backup of a CBS existing 4.2.0.124 Server (device). While trying to restore the backup on the Migration machine (ACS 4.2.0.124 for Windows), I am unable to see the directory area where I can select the backup file to restore.

    Could you please give any suggestion on the same.

    Kind regards

    Brigitte

    Make sure that your java is up to date. Also try using firefox just to rule out the question of the browser.

    -Jousset

  • Migration of ACS of the device to windows server

    Hello

    Is it possible to migrate the ACS 4.2 device to microsoft server 2003?

    has tried it before?

    R/g

    There is no problem to migrate from the device of the CSA to ACS for windows.

    If you wish to do this, it is best that your ACS for window running the same version of the code in form of ACS appliance.

    You can do a backup on device ACS and restore it on ACS for windows.

  • Migration to Vista Home Premium programs and files for Windows 7 Ultimate

    Hi guys, I just want to know if there's no possibilities

    to migrate from installed programs and files in my Vista Home Premium to Windows 7 Ultimate

    --------------------------------

    Also if I have Vista Home Premium should I switch to Windows 7 Home Premium too. I want to Windows 7 Ultimate!

    Hello

    You can upgrade from Vista Home Premium to Windows 7 Home Premium or ultimate; the choice is yours.

    «Compare the editions of Windows 7»

    http://Windows.Microsoft.com/en-us/Windows7/products/compare

    If you go from Vista 32 bit Home Premiun 32-bit Windows 7 Home Premium or Ultimate, you can do an inplace upgrade.

    The same goes for Vista 64 bit for Windows 7 64-bit

    This will keep your programs and data intact.

    But ALWAYS make a backup of data when you perform this type of work on your computer.

    "How to do an Installation of upgrade Inplace of Vista to Windows 7"

    http://www.SevenForums.com/tutorials/1818-upgrade-install-Windows-7-a.html

    And before you buy Windows 7 read and check to see if your computer is able to use Windows 7 to its best advantage:

    Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

    If this is not available, Windows 7 will not properly work for you.

    Run the "Windows 7 Upgrade Advisor.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

    Check if your specifications are compatible for Windows 7:

    "Windows 7 system requirements"

    http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

    "Windows 7 Compatibility Center" for software and hardware:

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    Windows 7 upgrade paths:

    http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

    And the Microsoft Store where you can get an idea of the price of Windows 7:

    http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

    See you soon.

    p.s. If you want from 32-bit to 64-bit, or 64 bit to 32 bit, upgrade facilities are not available.

    You will need to do a clean install.

  • Change IP on ACS for Windows

    Are there special requirements when you need to change the IP address of the Cisco ACS for Windows Server?

    Florrie,

    Please mark this resolved thread for others to take advantage.

    Kind regards

    ~ JG

  • Identify the Version of the hotfix in ACS for Windows 4.2

    Hi guys,.

    I need to identify the good patch Version in a customer ACS for Windows 4.2

    How can I do this task?

    In the page, I can't find any reference to patch

    My best regards,

    André Lomonaco

    It will show also from my experience you PATCH version, here's another thread that said click on the Cisco logo, let me know if it works for you or not.

    https://supportforums.Cisco.com/thread/1003509

    Thank you

    Tarik Admani
    * Please note the useful messages *.

  • Devo licenza esistente ACS Design Standard for Windows 5.5 di aggiornare alla ACS Design Standard 6 by Mac: come posso procedere?  mailto:Fabio.Baroncini@Lepida.it grazie

    Devo licenza esistente ACS Design Standard for Windows 5.5 di aggiornare alla ACS Design Standard 6 by Mac: come posso procedere?  [personal information deleted by Moderator]

    You can buy an updated version of CS6 using this link. If necessary, change the countries at the bottom of the web page:

    Creative Suite 6

  • How to migrate bookmarks Firefox in Windows XP to Windows 8?

    I am a new hand with Windows 8 and who need instructions step-by-step on how to migrate bookmarks Firefox in Windows XP to Windows 8. I had tried a few suggestions that I found on the internet, by copying the profile of XP folder in 8. The result was that Firefox cannot open because he couldn't find profiles, and I had to uninstall and reinstall Firefox on my Windows 8 to use Firefox.

    To keep your tags on bookmarks, use the type .json

    or for use universal (other browsers that do not support the tags), export without tags

  • Drivers for Windows Server 2008 R2

    PE1950, 2950 and MD3000i MPIO on Windows Server 2008 R2

    We're trying to nail a few dates to migrate our W2K8 R2 platform and plan the project.  We have most of our technical plans in place, and we have the code.  We have no Dell drivers however and there are several suspicious communications from Dell on this topic...

    Case #1: http://en.community.dell.com/blogs/insideit/archive/2009/08/10/ready-for-the-transition-dell-provides-support-for-windows-server-2008-r2.aspx

    Note:

    • Our engineers have missed on countless piano recitals, songs and episodes of American Idol while spending thousands of hours of testing and validation to make sure that dy products Dell running Windows Server 2008 R2 are the business-rea.
    • We have pilot complete support for Windows Server 2008 R2 for Dell hardware so you can deploy, run and manage easily. You can go here to download the drivers.

    If you view the service labels in our support of similar product groups, you will find an R2 option for servers... but the only public services on the PowerVault MD3000i you don't find any reference to R2 at all.

    Case #2: http://www.delltechcenter.com/page/Supportted+Dell+PowerEdge+Systems+for+Microsoft+Windows+Server+2008+R2+Beta

    This is a list of Beta for PE obviously compatible servers, however it would make sense If Microsoft has included natively the right drivers for the Dell hardware in the distribution of Microsoft R2 RTM so, just can't find any supporting documentation and do not know if the network drivers are compatible with MD3000i.

    #3: There are a few hacks to get drivers Windows 2008 MPIO inherited working with the RC R2 & MD3000i on this forum, but no reference to R2 in the MD3000i matrix and nothing on the site... it's why, we have wondering again where are the good drivers for R2 RTM?

    Can you be it someone from Dell and or this forum please send information on these issues?

    #1: driver compatibility of matrix for Windows Server 2008 R2 running on PE1950 and connected to an MD3000i PE2950 is a supported configuration?  (Code R2 RTM was released to Microsoft volume license customers)

    #2: the network drivers for the host machines included in the support of Windows Server 2008 R2 RTM?  If this is true, are the drivers MPIO for MD3000i and iSCSI Dell other platforms included in the support of Windows Server 2008 R2 RTM as well then?

    #3: If all the answers are not questions #1 and #2... could someone PLEASE contact people of pilot certification on Dell to see if they are same in QA at this point, if they plan to update and display an estimated date of implementation?  We have contacted tech support, but received very vague answers on anything with R2 at this stage.  There is a business directory and a path to escelation for support tickets, but the midrange as this makes it much easier to share information for the masses, we just have not yet found.

    Thanks for your information, comments and your support!

    OptimalState

    I was finally sent to someone who could give me some information on this within Dell, here's what they said:

    PE 1950/2950 drivers:

    The pilot should be included natively in Windows Server 2008 R2 media, and if so, would these drivers would be supported by Dell in a production scenario.

    MD3000i:

    I know that we will not issue a new MDSM which will fund 2008 R2 until sometimes in October. The MD3000i requires MPIO to the MD3000i and Dell drivers driver installation to work properly. I'll see if there is other information that I can find. I understand your frustration and engineer told me that this has been corrected in the next MDSM and MD3000i firmware version in October.

    So, it looks like October before MD3000i will be supported.

    OptimalState

  • Specifications of the system for Windows 10 technical overview?

    Greetings,

    So guys, I thought install Win10 Technical Preview (to get in touch with this new update coming) in my pc, but then I thought since I is not such a great pc, since a player im, win10 will use more my RAM and turn my pc slower?

    Thank you.

    Can I upgrade my existing version of Windows to Windows 10?

    Given that Microsoft made available the first version of the preliminary version of Windows 10 in early October 2014, there was a misunderstanding that this is not a product you use to replace a facility for production of Windows such as Windows 8 or 7 or Vista. On the other hand, if you test it on one machine, the best recommendation is to create a partition or have a spare ready hard drive where you can install it. Windows 10 in its current state of the pre-release will expire, and at the same time, it's unfinished work. So if you need to evaluate it, the best way is by installing it next to your commercial installation of Windows.

    If you choose to upgrade your existing Windows to Windows 10 version, please be warned, it will make your recovery in functional partition, requiring to have separate recovery media to reinstall if necessary.

    Where can I get more information about the preparation of my computer safely for Windows 10 tests?

    How to dual boot, the latest version of Windows built with earlier versions of Windows

    How to migrate Windows 10 Preview release: Dual Boot to install and protect the accumulated data

    Backup your current Windows installation. Because you will make important changes on your computer, you should always back up before doing so. It is strongly recommended! See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • Move the CUPS 8.6 to GI & P 11.0 - client for Windows 10.6 Jabber

    Hi community support

    We are modernizing our environment voice of 8.6 to 11.0 CUCM, CUPS, CUC and UCCX including passage of MCS including Cisco UCS servers. Regarding CUCM, UCCX, and CUC I just finished these several times in the past and we have a detailed plan. Regarding the CUPS/Jabber, we always try to finalize the design of upgrade and after reading many documents and a few good videos by Jaime Valencia our particular upgrade scenario is still uncertain.

    We were using Microsoft OCS and decided to migrate to CUPS/Jabber so we have 3 groups CUCM we created 3 only the CUPS server clusters (Let's put HA when we go to Cisco UCS, but at the time we had only 3 MCS spare servers) and they have peers inter-classes.

    • We use a single domain across all 3 groups.
    • 100% of our users use IM & P through integration of voicemail and calendar and call control
    • 10% of our users have also softphones
    • We do not use SRV yet for service discovery due to having 3 groups on 8.6 so we Jabber for Windows 10.6 bundled with Microsoft SCCM, specifying the Type of account as Cisco IM & presence and login server 'use the following server' that points to the Publisher of CUPS.
    • First time users will have to specify [email protected] / * / how he discovered the area, use only the user name and password to connect, after which its caching and all connections are automatic.

    My questions are:

    • When we improve CUPS 8.6 to IM & P 11.0 ourJabber for the client configuration Windows 10.6 will continue to work without modification?
    • We currently link to the Type of account 'Cisco instant messaging and presence', this allows us to use IM & P and the voice that is to control the calls and softphones, you would select Account Type Cisco Unified Communications Manager in what scenario?
    • We want to use SRV for the Discovery Service, but as we have 3 groups who are upgraded in an approach by steps are better wait we have updated all 3 groups, we can use a single SRV for multi clusters with ILS?
    • When you first connect to Jabber, you must enter [email protected] / * / while he discovered the field then we just enter username and password (less the field), the average of SRV service discovery simply enter the user name and password once without the specified domain?
    • This SRV for the discovery service also provides the AP for connection if the main server is down or is making another way?

    Thank you, Carl Ratcliffe

    Preston, Lancashire England

    Yes, the configuration remains the same

    As for the second question, read here:

    http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/Jabber/10_6/planning-...

    http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/Jabber/10_6/CJAB_BK_C...

    As now CUCM is one that handles services profiles, which define everything, you want to use _cisco-uds

    #3 Yes, you probably want to wait to get them all in the same release, then make sure THEY works very well, and then configure the SRVs

    #4 Yes, the first time, it will ask for [email protected] / * /, once he finds the SRVs it caches the user and you need only the password.

    #5 Yes, you can configure the SRVs for all servers in the cluster.

  • The AEC on Highway-C & E code for windows, Android and iPhone

    Hello

    We have Expressway-C & E version 8.5.1 and Jabber client 10.6.2

    CUCM version is 10.5

    AEC on Highway-C & E does not work.

    For windows, I get a beep while shouting and nothing happens after you enter the code of the ACS.

    Any suggestion how to College working on the highway-C & E (VPN less Jabber)

    Rgds

    Rajesh Kumar

    Hi Renon,

    This is currently not supported, there is an open improvement to follow this

    https://Tools.Cisco.com/bugsearch/bug/CSCur54666/?reffering_site=dumpcr

    Support of AEC to Jabber via Mobile & Remote Access
  • Migration from XP to Windows 7

    Sony Vaio VGA-RB52; I was on the site of Vaio from Sony about this.

    We see evil on the download and registration, driver Sigmatel Audio XP or Vista driver before, installation of Windows 7.

    5 years ago, I read on, a migration tool for multiple users in which, files and user settings as pilots, migrated to Windows 7

    Thanks to this tool. (USMT, AIK) I don't know which one to use.

    Y at - it someone helping me migrate the drivers online?

    Hello

    Before purchasing Windows 7, follow these steps:

    Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

    If this is not available, Windows 7 will not properly work for you.

    Run the "Windows 7 Upgrade Advisor.

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

    Check if your specifications are compatible for Windows 7:

    "Windows 7 system requirements"

    http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

    "Windows 7 Compatibility Center" for software and hardware:

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    Windows 7 upgrade paths:

    http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

    «Installation and reinstallation of Windows 7»

    http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

    _______________________________

    There is a recent arrangement (this year) by Microsoft to partner with Laplink for a free program to transfer files and settings (no drivers) from XP to Windows 7:

    Use the FREE program PCmover Express:

    http://www.Microsoft.com/Windows/en-us/XP/transfer-your-data.aspx

    See you soon

Maybe you are looking for