Migration of ACS of the device to windows server

Hello

Is it possible to migrate the ACS 4.2 device to microsoft server 2003?

has tried it before?

R/g

There is no problem to migrate from the device of the CSA to ACS for windows.

If you wish to do this, it is best that your ACS for window running the same version of the code in form of ACS appliance.

You can do a backup on device ACS and restore it on ACS for windows.

Tags: Cisco Security

Similar Questions

  • in the Device Manager window.there is a brand of (!). Microsoft tun miniport adaptor.this device cannot start. (code 10)

    in the Device Manager window.there is a (!) brand microsoft tun miniport adaptor.this device cannot start. (code 10) hmendezlopez

    Hello

    Control Panel - Device Manager - do right click on them - UNINSTALL - REBOOT

    Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you wish
    and on some computers, it will always be there but don't cause any trouble.

    On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
    ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
    error message
    http://support.Microsoft.com/kb/932520

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • After changing the motherboard in my PC the device software windows 7 cann't be activated. I tried many times to speak with the service the customer but failed.

    After changing the motherboard in my PC the device software windows 7 cann't be activated. I tried many times to speak with customer service through automated phone system, but failed. Now what should I do.

    The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

    -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

    -OEM Licenses are tied to the computer first you install and activate it on

    -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

    -OEM versions does not move directly from an older Windows operating system

    What is OEM software? :

    http://support.Microsoft.com/GP/oemsupport_1/en-GB

    Licensing FAQ:

    http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

    --------------------

    Windows 7 - version comparisons:

    http://Windows.Microsoft.com/en-us/Windows7/products/compare-editions

    MS Windows 7 store price:

    http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

    --------------------------

  • How can I change an icon for the device in Windows 7?

    How can I change an icon for the device in Windows 7?

    In 'Control Panel\Devices and printers' I want to change the icon of a device that there are listed.

    Hi Dave Tavres

    I'm afraid to say that you would not be able to change this icon.
    This icon is provided by the hardware manufacturer, and is included in the drivers and architecture has no Windows allows to change this information.
    However, you can use the third party applications to change. Use your favorite search engine to find on the Internet.

    Important note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

    It will be useful.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • copy of the mac to windows server data

    Hi all

    My apologies in advance if this ended up in the wrong section of the forum, hoping someone could point me in the right direction.

    I work for a company that currently stores its files on an OS X journaled NAS device, connected to a Mac Mini via the lightning cable and the mac connects to the network via ethernet.

    We are planning a migration of large data (~ 18 TB) from a NAS device mac to format, on a Windows Server (like using NetApp storage solution / VM datastore)

    I wonder what could be the best application to manage the data transfer? In Windows environments, I used Robocopy or FTP and love it, but not really know on the side of Mac of things when it comes to data migrations.

    We have a paid version of ChronoSync we use to run our nightly backups to other NAS material - I see that this has developed in a few searches on Google.

    2 other products that pop up in my research are arRsync and SuperDuper - can someone comment or recommend these products?

    That's what I look for in an application to manage the transfer:

    -support to copy the attributes of file from the MAC world to Windows

    -support the recovery if the transfer fails / break

    -being able to provide a significant peace of mind summary when the transfer is complete (sort of like ChronoSyncs connect)

    -GUI based and have a nice interface

    -Be reliable to transfer large date - currently about 18 ~ TB

    Looking forward to hearing your comments, no doubt let me know things that I have to take into consideration during the planning phase or "traps".

    Matt

    So I'm going to bite and offers some advice.  Summer by this much (sigh).

    First of all, some of the things to watch for:

    1: naming.  Mac users in storage Mac can use any character that they want: and.  For example, my.file! @# $> That's so important # $123. .    can be a file name.  Cannot * REALLY IMPORTANT FILE!  Yes, there are spaces in the and at the end.  Yes, this will make panic window.  You need to do a review of the names of files and folders before you try to migrate.  Search for files that begin and end with the space character.  Beware reserved characters in Windows.  Clean your name prior to migration.  For more information, see here https://msdn.microsoft.com/en-us/library/windows/desktop/aa365247(v=vs.85).aspx

    2: maximum length of the path.  Yes.  In this day of unicode several parts of Windows can only manage a path of the file system maximum of 256 characters.  See the link above.  If you arrive by a system of support for paths longer (like OS X and * nix operating systems) that you want to review the length of your paths.  Test, test and test again with all of your tools, including your backup software.  Make sure he can see both paths that exceed the API limit and also it is able to restore data in ways that exceed the length.

    3: SMB is always a nightmare.  Numeral ID of file crawling, to slow down the reading of the directory, to Hung Finder.  Your version of Mac OS will have degrees of success.   10.8 was a mess with DFS.  10.9 was a wreck of train with Windows cluster servers.   10.10 has huge issues with ID of file enumeration and periodic deadlock.  Yet once, test in your environment.  Get comfortable with the nsmb.conf file.

    4: do not leave your sleep of Macs.  Reconnect the AFP inactive supports.  To connect to a server, let mac sleep, wake can renegotiate the connection with the server (generally) volume.  SMB does not.  If your Mac to sleep with documents open on the part of the SMB, you are in a world of pain.

    5: Be prepared to not be able to find anything.  Research on the shared Windows resources has been a frustrating situation.  You will have taken in charge of Spotlight from the server so that you can use a directory to search like Find Any File trawling or be ready to manage Spotlight index on each workstation and hope for the best.

    Regarding the methods to get the data from one place to another, you must realize that there is a time constraint.  Using a 4 GB/min of transfer GigE, assuming that no problem and rule without interruptions, 18 TB of data will be 75 hours to copy.  Now, since it is a SAR passes to a Windows system, you probably won't get 4 GB/min so increase this number by 20%.  If the Windows Server on writing virus scanning, add another 10%.  If possible, the best advice I can give you is to do it in logical blocks.  Now, I don't know your data set, so this is not possible.  However, if you have several shares, move an action by end of week to ensure you have enough time to perform the copy and also to correct problems that may occur.

    About the tools, I have always used rsync because it allows the two detailed logging and works also in additional line.  Should we get disturbed for any reason, you can pick up where you left off.  Unfortunately, this isn't based GUI.  Also, the rsync 2.6.3 included with OS X is not sufficient to support all the features of file system.  I prefer to build a copy of the last branch 3.  I'll also include some of the patches as indicators of file and compression of hfs.  If it's just data, the patches may not be necessary.  If you need a GUI tool, CronoSync is correct.

    And finally, if you find that SMB on Windows is just too frustrating, there's Acronis access connect.  It is a supplement to the Windows Server native AFP and Spotlight.  Over the past years, I was faced with questions SMB through many versions of Mac OS X.  Of course, several questions are in corporate environments where I have no visibility to the configuration of Windows Server.  I have no idea what they are doing on these machines, but I don't know that OS X integration was harsh.

    I hope this helps.  Good luck in your project.  Test and test even more before putting forward your end-users.

    Reid

    Apple Consultants Network

    Author - "El Capitan Server - Foundation Services.

    Author - "El Capitan Server - Collaboration & control»

    Author - "El Capitan Server - Advanced Services '.

    : IBooks exclusively available in Apple store

  • Restart the application on windows server in datacenter information service.

    Disabled the service appinfo (he was operating at 80% cpu) and restarted by error. I can't find a way to restart the appinfo on windows server 2008:

    -safe mode is impossible because msconfig and bdedit do not work without appinfo

    -boot.ini does not exist on windows server.

    -regedit does not open without appinfo

    -sc config does not work without appinfo

    -analysis system, ditto

    Is is possible that simply disabling a service to completely destroy a windows server?

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • What is the difference between windows server 2008 and windows server 2012?

    I'd be grateful if someone could give a comparative perspective of the two products.

    Hello LSAKR,

    Microsoft Communities is for consumer issues with Windows 8, Windows 7, Windows Vista and Windows XP. Your question about Windows Server would be better treated in the TechNet for Windows Server forums.

    Click here to transfer your question in the general Windows Server 2008 forum.

    Sincerely,

    Marilyn

  • To try the beta of Windows Server '8 '.

    Hello

    I am (I am doing everything) two small nonprofits who is both very computerized in their demand for services.  My vision that their development involves the inevitable expansion in technology database server.  I'm still very much in the learning phase, in this regard and teaches me everything I can.

    I learned a few days before, on the Technet site ' "on the beta of Windows Server '8 '.  Through my experience during my self-training and tests with Microsoft software, I discovered that it is always better to be "at the forefront," then, of course, it would be evidence of ground for my learning of suitable to my technological base to these technologies (forward-looking).

    I went again to the [today, both Technet and MSDN,] and received "unable to locate this url" messages for all possible links for this beta trial software product.

    I missed a deadline to try this latest server software?

    All pages pointing to these links felt a need to sign up for the trial, but I could find no registration link.  When profile pages Microsoft's come-up and all these slots have been filled, and boxes checked, I always "impossible to locate this url" messages

    For Windows Server 8 beta related questions, please post in forum Windows 8 beta TechNet Server:

    http://social.technet.Microsoft.com/forums/en-us/category/winserver8

  • A question about the fix (R2 Windows Server 2012)

    "A snapshot can be damaged when the suppliers of Volume Shadow Copy Service (VSS) snapshots take more than 10 seconds to create on a computer that is running Windows 7 or Windows Server 2008 R2."

    For this problem, you are given a Hotfix.But if the support of Windows Server R2 fix 2012, I want to know. I found this fix to surpport.

    Impatient of you can give me an answer.

    Thank you very much!

    "A snapshot can be damaged when the suppliers of Volume Shadow Copy Service (VSS) snapshots take more than 10 seconds to create on a computer that is running Windows 7 or Windows Server 2008 R2."

    For this problem, you are given a Hotfix.But if the support of Windows Server R2 fix 2012, I want to know. I found this fix to surpport.

    Impatient of you can give me an answer.

    Thank you very much!

    Hello

    Windows Server is supported on TechNet. Please click on [show all]

    on the left side of this page to select the most appropriate forum https://social.technet.microsoft.com/Forums/en-us/home

    Don

  • Reg: The base backup for the update of Windows Server

    Hi all

    Oracle Database 11g Standard Edition 11.2.0.1


    I plan to update windows server.
    Thus, before the update of windows server, do I need to take backup of the settings regarding the oracle database.
    If so, please help me, what are all the backup before the update of windows server.


    Thank you
    Madhu

    Published by: Madhu.149 on October 15, 2012 09:50

    Is this cold backup and sufficient archives, for the exact replica of primary education

    You can recover up to cancel if something happened.

    Do I have to take the backup of the primary database as cold before the primary.

    always always take backup before any operation.

    You can use this link
    http://thetendjee.WordPress.com/2007/08/29/how-to-perform-and-recover-from-a-cold-backup/
    http://www.sensehaze.com/index.php/Oracle-database/82-Oracle-Data-Guard/110-DG-112-cold-back

  • How to enlarge the screen of Windows Server 2003 on VMware Server 2?

    People,

    Hello. Because Windows 7 is not compatible must be installed to PeopleSoft PIA, I need to install VMware Server 2, and then install Windows Server 2003, which is compatible with PIA, on the virtual machine.

    But when I open Windows Server 2003 on the virtual machine, Win2K3 screen is very small, and its size is of about 1/4 of the screen of my computer screen. It is not comfortable to work for a long time.

    People know how to enlarge the screen of Windows Server 2003 in a virtual machine VMware Server 2 so that its size covers all of my computer screen?


    Thanks in advance!


    Lucy

    Did you already installed the VMWare tools in your guest OS in VMWare? In general, it helps a lot to be able to redefine a larger screen definition.

    Nicolas.

  • How to control the quote on NAS devices by windows server 2008 R2?

    Dear all,

    I have Windows Server 2008 R2, and I have an important investigation concerning the control of quotes on my NAS device.
    I have a LaCie 2big Network 2, connected to my network and I copied all my data on it, my shared folder is public, so its accessible without credentials and its already shared and accessible by all users.
    I want to control the subfolders with specific citation for each user and control which extensions to be used by Windows Server 2008 R2.
    So any help to get there?
    Kind regards
    Abdelaal,

    Hello

    Your question of Windows 2008 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forum. You can follow the link to your question:
    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

    Hope this information helps.

  • Laptop Samsung RC730 - impossible to find or install the device bluetooth - Windows 7 driver

    I used the blue tooth for centuries on this laptop and successfully transferred things to 2 different mobile phones.  Suddenly it does not work and the resolution of problems said the bluetooth device driver not installed.  I have the icon in my taskbar and have tried everything.  its driving me crazy - what because I installed the bluetooth Blue Sun cd?  I have uninstall.  Help, please!  When I look in the Device Manager it gives me the possibility to install it but could not find the missing driver of the laptop computer or internet

    Hello Fiona,

    Thanks for the reply for us.

    If you receive error device not found Bluetooth driver, you can try the steps of troubleshooting provided in the link below.

    Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

    If you want to send the screenshot we to the Microsoft Community Forum, please visit the link below.

    How to include a screenshot in your message

    Do we know if the provided troubleshooting steps helps.

  • Satellite A505-S6004 - unknown device on Windows Server 2008 R2 64 bit

    I'm trying to install Windows Server 2008 R2 64-bit on an A505-S6004 (initially Windows 7 Home Premium) to a new disk. After downloading and installing many drivers for Windows 7 and install Toshiba Web site, I have two things left in the device manager that I don't know what to do for them.
    The info is under another devices basic device PCI System Bus 3, device 0, Function1 and..., function2.

    Any ideas what this can be?

    Thank you for your comments!

    If you are looking for drivers or unknown devices anytime, once again, that could be useful:
    [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=208721&]

  • ACS 4.1 supported with Windows Server 2012 domain controller

    I put to level my domain controller / Active Directory from Windows Server 2003 to Windows Server 2012.

    In my environment, I use Cisco ACS 4.1 that is built into Windows Server 2003 Active Directory.

    ACS4.1 will be working perfectly with my new domain controller (Windows server 2012) or I need to improve my ACS too?

    Kind regards

    Junaid

    ACS 4.1 does not support the 2012 server that you should update

Maybe you are looking for

  • Al querer contestar UN correo, Outlook not me already, is is the pantalla in blanco

    HE el boton derecho del raton clicar para loading page of nuevo y to me abre a nuevo correo, sigo sin poder contestar UN correo pero me han enviado

  • OfficeJet Pro 8600 - N911a: completely disable a Fax

    I "inherited" just a HP Officejet Pro 8600 used e-All-in-on printer - N911a. We do not have fax and I want to turn it off.  How do I turn it off? If not cela, can I re-arrange the icons of the main menu to put it on the first screen (we need to copy

  • Aqua M4 battery problem?

    I'll just watch videos on youtube my phone as usual (it ws 85%) and all of a sudden my phone turns off. I tried turning back on and keep it on charge and hold power + up/down on the volume, but nothing works. Anyone know what is the problem or how to

  • Can I run parallel to R12.1.3, 11.2.0.3 adadmin?

    HelloI need to do the following in adadmin. Can I open multiple window and the parallel?-recreate the grants and synonyms-compile flexfields-regen jar files - select YES when you are prompted to force the generation of jar files.-recompile apps (chec

  • Switching delay between sites

    There is a delay in switching between sites. Even if I'm not connected to the server of a website I currently selected, when I switch to another website (in files) there is often a delay of lond with several timeouts because he seems to be doing some