Migration of the device from Smartphone blackBerry, some contacts not migrate and then loses

Similar Questions

• BlackBerry Smartphones Blackberry "BOLD" Contacts not syncing with Mac Book under Leopard

  I got my BB Bolt two weeks ago.  It works fine out of the box to sync with my mac using missing for Blackberry Synch.  Just today, I noticed that my contacts did not come across, and also some of the contacts that were on my BB were duplicated.  Yesterday, I installed Pocketmac for Blackberry, it did not work to my satisfaction, I uninstall and I went backward lack of synchronization for Blackberry.  Today, all my contacts are now missing from my Blackberry.  Calendar information are coming through when I synchronize, but not contacts. All possible solutions?  Right now I'm at the edge of this defective gadget appeal.

  Hi and welcome to the forums!

  You can better served to solve this thread and open a new

  a Blackberry for MAC forum, I'm sure you can get a little more

  Here, specific answers

  Thank you

• The field changes created if a contact is deleted and then reimported?

  I know that a lot of data is lost if a contact is deleted from Eloqua and then re-imported. Creation Date information are lost? For example, if a contact is added to the original Eloqua on, say, 01/01/2013, deleted at 02/01/2013 and then re-imported on 03/01/2013. Date on which will appear in the Date created field?

  Thank you.

  I answer myself... So, I advanced and deleted one of my test addresses and then recreated. The Date created field changed to today. Interestingly, it seems that my story was recorded.

• BlackBerry Smartphones blackberry world icon not visible

  Been through many forums, tried allsorts of solutions that have been posted, but I still nothing on my blackberry phone! Help, please. I have ablackberry bold 9780 on OS 6.0

  Hi loratta2702

  Welcome to the Forums of the BlackBerry Support

  Sory to see but if you are looking for in the forums it perhaps tons of posts related to the issue you are experiencing.

  In what concerns your problem with BlackBerry World, if your device OS is earlier than 6.0.0.706, then try to update your software to device or download BlackBerry World version 4.0.0.55 which is the best solution now available for BlackBerry World, first uninstall any existing version of the BlackBerry World from your device, options > device > application > locate and remove BlackBerry World and then do a battery pull reboot by removing the battery while your unit is powered...

  After restarting the device from your BlackBerry browser search or click here http://mobileapps.blackberry.com/devicesoftware/entry.do?code=appworld3 to download the 4.0.0.55 version. Also check out this Knowledge Base for assistance:

  KB29422 BlackBerry App World icon is missing after upgrade to BlackBerry App World 4.0.0.63 to 4.0.0.65

• Smartphones blackBerry curve8520 does not

  Dear, please help

  Is my BB 8520 curve is not turn on/off when I tried to connect with the computer/charge, the led is lighting and the paste symbol is visible with a mark of Red Cross on the screen, please help.

  Normally, which indicates that the BlackBerry has been deeply drained.

  Leave the device to 2 or 3 hours of charging and then, still plugged into the charging cable, remove the battery of the device a few seconds and plug it back. If it starts - let - the charges to 100% (check the Options > status for the percentage). If it is not restart on the first attempt, leave several hours. I had a charge for two days before, she came back to life after extreme exhaustion of the battery. Every 3-4 hours with the device plugged into the charger, you can remove and replace the battery to see if it restarts.

• I bought an iphone 4 on ebay but it's locked, icloud so I am not able to use it, and the previous owner is available to remove the device from their account: How can I use the appliance?

  I bought an iphone 4 on ebay but it's locked, icloud so I am not able to use it, and the previous owner is available to remove the device from their account: How can I use the appliance?

  You can not. Try to return the unit and get your money back. There is absolutely no way for you to unlock the device,

• I can't unlock my iphone by apple ID knowing that the previous owner removed the device from his account, but still the unit asks the old code in order to unlock the phone

  I can't unlock my iphone by apple ID knowing that the previous owner removed the device from his account, but still the unit asks the old code in order to unlock the phone

  If the device is always ask for the ID of the previous owner, then it is has not been deleted.

• media player does not open. Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all

  Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all

  Maybe the info will offer something that you haven't tried:

  First, launch... Task Manager...

  How to launch the Task Manager instantly in Windows XP or Vista?
  http://www.XP-Vista.com/tipstricks/how-to-launch-the-Task-Manager-instantly-in-Windows-XP-or-Vista

  The Task Manager / processes tab select (highlight) any which instance of:
  "wmplayer.exe" and left click on the button "complete the process".

  If you see a dialog box 'Warning'... left click Yes.

  Close the Task Manager.

  Try Windows Media Player again.

  And... the following links may be worth a visit:

  (925704) when I try to use Windows Media Player 11, the program
  does not start, or some user interface elements are empty
  http://support.Microsoft.com/kb/925704

  Please see the following article for info on opening a high command
  Prompt in Vista

  Windows Vista - command prompt: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/command-prompt-frequently-asked-questions
  (scroll down to: how to run a command with elevated privileges?)

  Good luck...

• Blurry text in the device as well as some other applications Manager.

  My system is an Alienware 15 R2 with graphics of 970 m.

  Initially, I was using the "display driver uninstaller" tool for cleaning re instillation of nvidea drivers because I had some display problems with older games. (Now I know that the program was not necessary)

  Then the display of all my programs are vague and very difficult to read. I tried another reinstall by using the display driver uninstall, but it crashed when rebooting in safe mode.

  Windows 10 required a soft & after instillation who did I had the same problems of blurred text.

  Technical support advised me to change the DPI scale

  www.tenforums.com/.../5990-DPI-scaling-level-displays-change-Windows-10-a.html

  & to change the plain text display

  www.tenforums.com/.../5990-DPI-scaling-level-displays-change-Windows-10-a.html

  It didn't work, but the strange thing is that a windows update fixed the problems for some programs, but not all. Steam & Google display correctly but Revit, Auto Cad & for some strange reason, my device manager are blurred.

  Here are a few screenshots to help diagnose the problem

  

  Tech support recommended 10 to win an ANOTHER re instillation, but I don't see how this could help.

  All of the Suggestions.

  Tesla1856

  Iczel

  Hi - I recently got my XPS13 version QHD (9350). The first thing I noticed that was blurry Device Manager as OP. Some windows are also very small. I need almost a magnifying glass to read. Y at - it any resolution to this?

  Of course, the appropriate display drivers must be installed correctly.

  In the Control Panel, set the display resolution to the (full) native resolution of the display panel. Who takes care of the "fuzzy". Always leave it like that.

  To provide superior, do you it in a different place. You can adjust the scale to the top of 100%.

  Oh, go ahead. Read the messages the wire, this is not a driver problem, making the scale or resolution. The blur is due to legacy applications not scaling properly, that's why the Device Manager seems to blur, but not the modern control panel interfaces (metro).

• Smartphones blackBerry BBM contacts are lost!

  Hello

  Actually, today was the first time I'm using Blackberry Desktop Software. After connecting my device to the port USB, the Blackberry Desktop Software was asked to make a backup. I allowed that to happen, it's a backup.

  After disconnecting my device from the PC, I tried to use the BBM, but I realized that all my contacts are lost.

  I tried to restore my mobile files by using the application. When I did, I found all my files and information on the device, I found no BBM contacts, so I tried to restore contacts BBM of Blackberry Desktop Software, but that did not work.

  Also, sorry if my language is sick. I'm trying to improve every day.

  hope you help me

  I think that you have upgraded to 7 worm that saves your BBM contacts in your BB ID.

  If you have until you lost them trying to re-download and upgrade your BBM to ver 7 of

  http://BlackBerry.com/BBM

  Select your desired language and to update and then sign with your BlackBerry ID.

• the upgrade from Win 7 to Win10 (upgrade Assistant) and get stuck on 99% for 8 hours.

  my laptop is acer aspire 5560 G with 6 GB of Ram DDR3, 750 GB HDD and amd quad - core processor A8 - 3500M with turbo core 2.40 GHz.
  and I have 250 GB of free space on the disk (C).
  can anyone help please?
  Thanks with regards.

  If the Upgrade Wizard of Windows 10 becomes blocked or unresponsive to 99%, wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

  If you encounter an error about enough space to perform the upgrade, see the instructions:

  How to install Windows 10 on devices with limited space

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1: Using the media creation tool

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  Select upgrade this PC now and then click Next

  

  Option 2: upgrade using the file ISO for Windows 10.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Support your default BIOS reset BIOS.
  • Check if there BIOS updates available for your system, and then to apply them.
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.

• "No access to the network" problem in Windows 7 and error message "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."

  Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
  I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.

  When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
  I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?

  Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.

  When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
  1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
  2. my IP address, DNS, subnet mask etc are set to automatic.
  3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
  4.I ' installed the drivers to date of 2014 on my laptop.
  5.I did a lot of searching the web, but they do not solve my problem.

  Please help me to solve it.
  I appreciate your help.
  Thank you.

  Hello Hall,

  Please keep us updated on the status of the issue.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7

  http://support.Microsoft.com/kb/2779064/en-us

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• BlackBerry Smartphones Blackberry 9650 Bold - not charging

  Hello

  There is a problem with my Blackberry 9650 "BOLD" (right now, she is evacuated to the point when the unit cannot be switched) load. After connection of the charger, diod red shine for a few seconds and then turns off. After that, normal charger photo with flash appears but it is stuck and not move not... (I can not specify my OS version and free size / applications installed on my device is now disabled...)

  What I tried:

  -Leave the charger of the day after, I did several times and nothing happened. Tried the wall charger and USB charge, none worked.

  -Purchase new charger, old charger was a sort of Motorola or regardless of the brand, it worked, but I recently bought original Blackberry charger, but it has not solved this problem.

  -Buy the new battery. right now I use an unofficial battery, it has solved this problem (I had before with also original battery). Buy new solves the problem for a few days, but then I accidentally emptied my battery at 0%, resulting in the same problem as before.

  -Leave the battery on the unit fo 24 hours and then put it back inside

  -Various boards 'disconnect the battery with the charger connected and then put again".

  Right now, I've tried almost every Council or tip Uncle Google spits when I ask for help, if I appreciate any help that can solve this problem...

  Thanks for your help.

  Hello and welcome to the community!

  Unlike older battery technologies, they do not run out. This has been known to damage, including making them useless. Since you solved your problems with a new battery, but exhausted while the problems returned, I would assume that your new battery was also damaged, and yet another replacement is your next step (and not allowing it to exhaust).

  Good luck!

• Events of Blackberry Smartphones blackBerry calendar does not synchronize with MS Outlook

  Using Enterprise Server for Blackberry synchronize all events calendar of the device to Outlook. Have tried Wireless sync and Sync Desktop Manager without result.

  Has not changed - thanks for the help but... New appointments work very well - this shutdown problem

• Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  N ° you need a computer logic board which has built in Thunderbolt.