Migration successful by vSphere GUI but not by PowerCLI

Similar Questions

• Why a sound card would be usable in the GUI, but not in mode command line?

  I am able to connect my audio capture card and stream with GUI, but get an error in the command mode line indicating "error: problem with the audio capture device.»  Please check

  the audio capture device works correctly and is not already in use. "I can start several encoding in the GUI sessions using the same card and listen at the same time.

  I was using this card with OUT 3.1 coding as a background service on Server 2003.  3.1 or 3.2 works in command line on

  Windows Server 2008 Standard or another system with 2008 R2 company. This is direct encoding audio only and it occurs using newly registered configuration original\modified profiles. My process: copy FMLECmd.exe and rename, copy saved GUI startup.xml and name to match streamnameCMD.exe, and then use a batch file that launches the streamnameCMD.exe configured by streamname.xml. Anyone have any ideas on how to solve this problem?  FYI, from GUI, I get a popup "not detected no video capture device" because it is not installed and the session doesn't AutoStart so I can't use Exe-to-SVC or AlwaysUp to run it in the background instead of streamnameCMD.exe.

  Logs show:

  Friday, July 10, 2015 13:58:30: rename the existing file from c:\flash_logs\streamname.stream.log to the c:\flash_logs\streamname. stream.8.log

  Friday, July 10, 2015 13:58:30:

  Audio settings: -.

  Feature: Wave in 1 31160616 (Op 7-Orban

  Format: Mp3 stereo

  Sample rate: 44100 Hz

  Bitrate: 96 Kbps

  Volume: 75%

  Stream to Flash Media Server: -.

  The FMS URL: rtmp: / /Server/ live

  Backup URL:

  Name of the stream: streamname

  Friday, July 10, 2015 13:58:31: audio input device selected: wave in 1 31160616 (Op 7-Orban

  Friday, July 10, 2015 13:58:31: failed with the error 80040154:CoCreateInstance(CLSID_NullRenderer,_0,_(CLSCTX_INPROC_SERVER|)) (CLSCTX_INPROC_HANDLER), IID_IBaseFilter, pFilterRenderer.ppv ()) system specs: HP DL580 G7, Intel E7530 1.87 GHz 24 hearts 16 Gb Windows 2008 R2 Enterprise x 64, 1101e Orban capture cards. 

  Thank you very much for your advice!

  I have it.  There is a problem with WMI communication between hardware and software layers, which is solved with the addition of the function of the office experience in Server Manager.

  Once this is installed, with the required file + print feature, sharing the program will recognize the audio card when running as a service and allows multiple instances of encoding using the same card.

• Can connect to esxi gui but not shell?

  Hi, I have a custom Cisco esxi 5.1 installation. I put the root/pass and can connect on the gui esxi fine. But, when I ssh on the same host using the same user/pass name it says it is denied. Should not be the same? Am I missing something here?

  Is your host in locked mode?

• KB253842 appears under the name 'successful' on 'windows update' but not listed on my computer control panel "view windows updates".

  KB253842 lists as successfully installed in "windows update" after installation, but never appears in my control panel 'programs' 'show updates' and this update is constantly as 'new updates available. It is actually installed on my computer?

  Hi Janice,.

  In addition, check to see if this article helps you.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

• vcops presents in vSphere client but not in vSphere Web Client

  Question for you.  I just installed vCOPs for demo in our environment, and I'm having a problem seen in the web client.  I am able to see it in real vSphere Client with all registered vcenters, but this isn't the best way to use the tool.  I use Chrome verstion 34.0.1847.116.  I also tried in IE.

  By using the web client of vSphere vCOPS isn't built the way but he is in the thick client.  In the client heavy, you have a plug-in, that you click and it basically gives you the web console window in a tab.  There is nothing like this for the Web Client.  If you click on an object, you can see the health of this object and so forth.  If you want to watch as you see in the thick client but you will need to connect to the user interface for vCOPS self https://vcops-ip/vcops-vspheremeaning.  Or if you look on the homepage of the web client, you can see under surveillance, you see the vCOPS icon and which will bring you to the login page.

• FDMEE of planning data loaded successfully but not able to see the data in Planning - export of fish shows in FDMEE

  Hi all

  We loaded FDMEE data to planning, data has been loaded successfully, but not able to see the data in the Planning Application.

  In the processes log, I can see her mentioned data loaded in the Cube. Please advise on this.

  Thank you

  Roshi

  Two things:

  -I wasn't talking about method you import data but export data. You use the SQL method. Go to target Applications, select your application of planning/essbase, and set load method as a file. Memorize your settings

  2014-06-19 12:26:50, 692 [AIF] INFO: rules properly locked the file AIF0028

  2014-06-19 12:26:50, 692 INFO [AIF]: load data into the cube by launching the rules file...

  2014-06-19 12:26:50, 692 INFO [AIF]: loading data into the cube using sql...

  2014-06-19 12:26:50, 801 [AIF] INFO: the data has been loaded by the rules file.

  2014-06-19 12:26:50, 801 [AIF] INFO: Unlocking AIF0028 rules file

  2014-06-19 12:26:50, 801 [AIF] INFO: successfully unlocked rules AIF0028 file

  -Then export again and review. DAT file in the Outbox folder. Is it empty?

  -You need to add a new dimension to your import format (Dimension add > currency). Then add Local as expression

  -Import, validate and export data

• Client vSphere 5.0 works on network, but not via the SSH tunnel

  Hoping someone can help you.

  Seems that others have this problem as well.

  Can connect to the network, but not through an SSH tunnel.

  On the network, I am invited to accept/ignore a SSL certificate.  This does not happen when trying to connect remotely (via an SSH tunnel).

  During troubleshooting, I port passed almost all the ports TCP, starting w / ports 80, 443 and 902.

  Through the SSH tunnel, via a browser, I can successfully access https://127.0.0.1 (VMware server), but the client software will not complete the connection, w / error message: «...» "The client could not send a request to the server."

  Any help would be appreciated.

  Thank you.

  Managed to understand this myself, having invested in a way more time I should have.

  This announcement in the hope that it will help others.

  In your SSH client, port forward with the help of one local loop, IP OTHER THAN 127.0.0.1 (such as 127.0.0.2 for example).

  Port 127.0.0.2:443 before--> IP:443 target

  127.0.0.2:902--> target IP:902

  127.0.0.2:903--> target IP:903

• I'm trying to reinstall my program elements 2 photoshop again - I did successfully in the past, but now, adobe does not accept my serial number. The message I get says that this isn't an Adobe ID. What should I do?

  I'm trying to reinstall my program elements 2 photoshop again - I did successfully in the past, but now, adobe does not accept my serial number. The message I get says that this isn't an Adobe ID. What should I do?

  Find the serial number of your Adobe product quickly

• FDMEE of planning data loaded successfully but not able to see the data

  Hi all

  We loaded FDMEE data to planning, data has been loaded successfully, but not able to see the data in the Planning Application.

  In import format, we have not mentioned hsp_rates, it's that whole issue?

  If we have different currencies, where we must define?

  Suppose we have INR, USD and GBP if I want to load the data of INR, where we define?

  Thank you

  Praveen

  Problem solved

  I've made changes in the import format now I am able to see the data in the Planning Application.

  Thank you

• How can I recover a machine in vSphere that was removed, but not deleted?

  Should what precautions I take to recover/redeploy a machine in VSphere that was accidentally removed from the inventory, but not deleted from disk.

  I know that the road where the vmdk file is on our SAN.  Can I transfer this machine?

  You can of course.  Just browse through the vsphere client data store and do a right-click on the virtual machine's .vmx file you deleted - then click "Add to the inventory,"

  see you soon

  GAV

• After the migration of profile, files can be seen but not read

  1 screenshot shows the folders as expected, but the choice by clicking on it does not reveal the 2 messages) the other tabs (created from a previous installation) show the correct data 3) menu option help / troubleshooting work ok - exit attached 4) another menu option do not work (for example "Help / About" does nothing) 5) I am running under a brand new installation of Linux Mint 17 / cinnamon - have tried to uninstall / re-Setup version 6) installed is 1:31.6.0 + build1 - 0ubuntu0.14.04.1 7) ~/.thunderbird contains two profiles, dw6qkyib. News and q0vb0h3j.default. Profiles.ini points to the latter

  (Already posted same question under [email protected], but not able to access the verification email - downloaded from the mail server and lost in the black hole!)

  The problem seems to have been using the old profile. Not only it has resulted in access to messages becomes incredibly slow, some of the meu options stopped working completely (e.g. tools / address book, help / about).

  After a discussion on the Linux Mint support forum http://forums.linuxmint.com/viewtopic.php?f=47 & t = 195264 & sid = b8b72a18e053f2f03dfe0e11cf21a59e I created a new profile and solved the problem.

• Service Pack 1 & 2 installed successfully but not displayed

  I had to install Windows Vista Home Premium on a new hard drive.

  I then installed 102 updates, including service pack 1.

  I then installed service pack 2.

  When I look at the properties of the computer, it shows only Windows Vista Home Premium, but not the correctly installed Service Packs

  Hello

  • Are you able to see the service pack 1 and 2 in the Windows Update list?
  • It she even offered to be installed again?

  I suggest you install service pack manually.

  Here are the links:

  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  http://support.Microsoft.com/kb/935791

• I can't find my outlook express address book after you migrate successfully from the old computer. The "Address book" tab shows that local address book empty.

  I move from a Windows XP computer to a Windows 7 computer. My old computer has Outlook Express. I've migrated successfully my emails and messages archived in Thunderbird on the new computer. I also migrated the Outlook Express address book using an external hard drive, but I was not able to understand how to find the Outlook Express address book in Thunderbird. The only way that I could find the Outlook Express address book, is to go to 'tools' and 'import' and then import the Outlook Express address book. When I do this, the Outlook Express address book features, duplicate entries (because I imported twice now). When the Outlook Express address book shows, it works without problems and I can use it to send emails. But once I close the Outlook Express address book, I can't find him. Other messages, I see that the "Address book" tab in Thunderbird should open a window containing a list of available on the left side address books. But this window in my computer does not display a list of address books. There is just a blank window for the address book personal (it has no contacts inside) and there is nothing on the left side.

  in the display (alt + V) address book menu > layout > directory pane.

• Task Scheduler ' run as ' GUI app not working not

  Hi, I'm on Windows 7 Pro with all the updates.

  I have a Windows Forms program that must be run from my nonadministrator user - a member of the unchanged 'users' group that is part of any installation of Windows.  Call the AUSER.   The program will run out of AUSER start-up and ' run as ' admin.  It works very well I put in place a shortcut to do.  Of course, he asks AUSER of identification admin each time.  Also can not have ' run as ' shortcuts in the startup folder.

  I read Scheduler of tasks would be a good solution for this - that he could "run as" the program the connection and require administrator credentials only when admin defines the task, but not later.   This is apparently NOT the case on my system, and I would like to know why.

  Just to remove any doubt that my program itself has problems, I tried scheduling NotePad.exe:

  I've implemented the task like this:
  Name: Test of Notepad
  When running the task uses the following user account: admin
  Run only when the user is connected.
  Run with the highest privileges. (checked)
  Trigger: when AUSER connecting
  Action: Start a program: C:\Windows\Notepad.exe (with a valid
  beginning of specified directory).
  Everything else the default value.

  The problem is that if I 'if the user is logged on or not' he don't get no interface graphic (like MS documented), but I need the GUI to control the program.  If I appear the task of AUSER Manager and tell him to report all processes (and provide identification information), I can see Notepad missing here - without head, running as an administrator, with not a GUI and no way (AFAIK) to join him.

  If I 'run only when the user logs' task never fires because mine is a single-user system, I'm either logged in as administrator or AUSER but not both.  (And even if I was in a multiuser system, the admin is not permanently connected, it is?)

  If I set the user ' run as ' AUSER my GUI program appears but throws an exception when it reaches the methods that require elevated privileges.  (Apparently the 'run with highest privileges"does not have more privileges AUSER, it elevates them just if AUSER is already allowed privileges in the first place.)

  I've seen several posts on .NET reports of success with this approach, but now I suspect that their "AUSER" is part of the admin and users group.  I can't have and maintain a good warranty.

  So is there anything else I could try?  And why no GUI by pressing "If the user is connected or not?"

  Thank you

  Tom

  I've seen several posts on .NET reports of success with this approach, but now I suspect that their "AUSER" is part of the admin and users group.  I can't have and maintain a good warranty.

  Sorry, you can't have a standard user account tasks to the highest privilege. As far as I KNOW, the task running with the highest privileges only works if the account used for the scheduled task is a member of the Administrators group. The solution might be to run the background job, create a journal, and then report the results in a separate to the foreground process.

• ESX host is listed in DVSwitch, but not in DVportgroups

  Hello

  I have the following in a CLuster (5.5 Vcenter, ESXi hosts 5.1) problem:

  I added a new ESX to the cluster (number 9 of ESX), then added 4 network cards to the DVSwitch (uses the LACP Protocol).

  In this DVSwitch I 2 DVportGroups / tag VLAN

  The problem is the host is listed in the tab "Hosts" in VCenter to level DVSwicth, but do not appear in the DVportgroups tabs (all hosts are listed here but not the last one..)

  vmk0 migrated successfully to the VLAN 1 St... but now, it appears limited to ""... I can migrate to the DVportGroup right... and VCenter says 'ok'... but nothing changes...

  I tried to migrate a virtual machine on the ESX (2nd VLAN) = > VM pings OK...

  So "technically" it works very well... but the ESX does NOT appear as members of DVportGroup.

  The problem appeared when I tried to deploy a vApp (antivirus) on the ESX... I'm stuck at the "select VLANS for the NETWORK card"... There is no VIRTUAL LAN in the list... (because the ESX host is no not part of any dvportgroup..)

  I tried "adding the ESX to the DVportGroup" after having asked for credentials, VCenter says 'ESX is already part of the pole '...

  Someone had this strange behavior?

  What can I do?

  Help!

  Best regards

  S

  I had a similar case, where the hosts have been posted under DVS, but not under DVS exchanges.

  A restart of vCenter Service fixed the problem. However, I was not deploy any TIME or such.

  Suhas