Migration to ISE for servers 3395 Cisco Cisco SNS 3495 question
Hi all. I have a client that runs on a Cisco 3395 ISE 1.2 Server and wants to migrate to Cisco SNS 3495 servers due to the end of life is imminent. My question is - this client should buy Cisco SNS 3495 server with a new software license, or may transfer or reuse the license of the software from their 3395 servers?
What will be the best course of action for them. Thank you!!
Ah, sorry, I was referring to the base, and, the apex (or Basic, advanced from previous levels of ISE) - which are licenses only you really need to worry. If you look at the details to the CCW, you're talking about this topic is the only one where the cost is indicated for the 3495 (except SmartNet if you added). This is not a point of STOCK you can add/remove. Basically, you have what you need from a material point of view when you purchase the device. Can you rehost license software (Basic, plus, apex) once you get the new devices up and running.
Tim
Tags: Cisco Security
Similar Questions
-
Check the ISE for the VPN Cisco posture
Hello community,
first of all thank you for taking the time to read my post. I have a deployment in which requires the characteristic posture of controls for machines of VPN Cisco ISE. I know that logically once a machine on the LAN, Cisco ISE can detect and apply controls posture on clients with the Anyconnect agent but what about VPN machines? The VPN will end via a VPN concentrator, which then connects to an ASA5555X that is deployed as an IPS only. Are there clues to this?
Thank you!
The Cisco ASA Version 9.2.1 supports the change in RADIUS authorization (CoA) (RFC 5176). This allows for the gesticulations of users against the ISE Cisco VPN without the need of an IPN. Once a VPN user connects, the ASA redirects web traffic to the LSE, where the user is configured with a Network Admission Control (NAC) or Web Agent. The agent performs specific controls on the user's computer to determine its conformity against one together configured posture rules, such as the rules of operating system (OS) patches, AntiVirus, registry, Application, or Service.
The posture validation results are then sent to the ISE. If the machine is considered the complaint, then the ISE can send a RADIUS CoA to the ASA with the new set of authorization policies. After validation of the successful posture and CoA, the user is allowed to access internal resources.
-
Limitation of ISE for concurrent user (same user)
Dear,
I have cisco ISE 3355 version 2.0.4.018 my question is how can I restrict the user authenticated to access devices of two only by his username and password.
where I have cisco what ISE integrated with AD internal for internal employees accessing the SSID and I need to limit the access used for two devices only (PC and phone)
If anyone can help me?
Kind regards
This 1.1.1.268code doesn't have the feature of concurrent session. You need to wait for 1.2 which is scheduled for late July.
Jatin kone
-Does the rate of useful messages- -
Angel losenord for servers 'time Capsule '.
JAG city ansluta en MacBook Air up to Time Capsule (fjärde generation) och skulle min "Ange losenord for servers 'Time Capsule' sa att den blir tillganglig for Time Machine. Men losenordet jag angav som jag har stallt for Time Capsule fungera inte min. Other annat losenord kan menas?
Forsok losenord for MacBook Air.
-
How to use PowerPhotos to perform a migration of Aperture for photo
We are running Yosemite and openness. We have about 10 Aperture libraries, some libraries have about 6000 images.
We have the Photos app on our Mac but don't use it yet. What workflow we should follow to upgrade to El Capitan and migrate from Aperture for the Photos using PowerPhotos.
I have been informed that we should first upgrade to El Capitan. But I don't know how to use PowerPhotos to help us in this migration.
I read on the PowerPhotos site below.
"If you have a lot of existing iPhoto or libraries to open that you want to migrate Photos, PowerPhotos will help automate your migration if you do not have to spend time to care for children of this long process."
It's a good question for FatCat (authors of PowerPhotos) support or study Chapter 7 of their manual - https://www.fatcatsoftware.com/powerphotos/Help/table%20of%20contents.html
LN
-
How to use the same services-config for servers the and remote.
My flex project works very well using the bottom but when I download my flash on the server I do not work, all the files and related paths are the same execpt remote is a linux server.
<? XML version = "1.0" encoding = "UTF-8"? >
<>services-config
< services >
< id = 'amfphp-flashremoting-service' service
Class = "Flex.Messaging.services.RemotingService"
messageTypes = "flex.messaging.messages.RemotingMessage' >"
< destination id = "amfphp" >
<>channels
< Ref channel = "my-amfphp" / >
< / channels >
Properties of <>
< source > * < / source >
< / properties >
< / destination >
< / service >
< / services >
<>channels
< channel-definition id = "my-amfphp" class = "mx.messaging.channels.AMFChannel" >
" < endpoint uri = ' http://localhost/domainn.org/AMFPHP/gateway.php "class="flex.messaging.endpoints.AMFEndpoint"/ > "
< / channel-definition >
< / channels >
< / services-config >I think the problem is the line
" < endpoint uri = ' http://localhost/domainn.org/AMFPHP/gateway.php "class="flex.messaging.endpoints.AMFEndpoint"/ > "but I don't know how to use the same services-config for servers the and remote.
I'll back up a bit.
Breakpoint URLS are defined as follows in the services - config.xml:
https://{server.name}:{server.port}/{context.root}/messagebroker/amfsecure
The meaning of each of the tokens is clearer when we see them as part of a complete url. If your context root is set to http://localhost , then I have no idea how your application runs in any environment.
If you leave the server.name and server.port chips in your configuration file, then they will be replaced when executing according to the location from which your application is served. However, the context.root token is replaced at the time of the compilation based on the value that you specify in Flex Builder or when calling mxmlc.
In order to reuse your file services - config.xml, you must use the same context-root on your development environment and to your deployment environment.
-
NetBackup for VMS in VCENTER instead of VMs, Questions
Hello
We test netbackup to get all the (incremental) days for machines virtual configuration the Vcenter
but your comments:
(1) the administrator says it seems slower than the normal backup against for servers prior to conversion, is that correct? is it because vmdk is used here?
(2) the VMWARE administrator admits it takes each time the same size when the snapshot, which should not be correct, right? and if yes, they will use the same datastore-> may cause problems so complete, that will make complete
(3) if install us the agent on the virtual machines, which will have backup of disks, which will be a problem if restore us for example?
(4) I have some vm but ending the backup snapshot is not deleted, I'll check that again today to see, this is a common problem for some hosts? the virtual machine is with brute map features, will exclude us or change something when the backup for this virtual machine? or is not released
(5) what is the main differences between this way and have agents on the virtual machines? wise management? problem restoring vmdk or? or what exactly
Please notify
Thank you
(1) the administrator says it seems slower than the normal backup against for servers prior to conversion, is that correct? is it because vmdk is used here?
This could very well be the case, depending on how you made the prior of backups and what type/speed storage you have.
(2) the VMWARE administrator admits it takes each time the same size when the snapshot, which should not be correct, right? and if so, they will use same datastore-> can cause problems if it is full, which will make full
A snapshot CAN reach the same size as its parent disk, in order to fill in data warehouses is possible. However, in the time it takes to create a backup, you should not usually see this kind of growth in the Delta. Overprovisioning of data warehouses can be ok, but their follow-up is crucial. VMFS needs free space - http://kb.vmware.com/kb/1003412
(3) if install us the agent on the virtual machines, which will have backup of disks, which will be a problem if restore us for example?
It works exactly the same way as physical servers. There should be no problem here.
(4) I have some vm but ending the backup snapshot is not deleted, I'll check that again today to see, this is a common problem for some hosts? the virtual machine is with brute map features, will exclude us or change something when the backup for this virtual machine? or is not released
Photos should be deleted once the backup is complete. It is not uncommon for this sometimes fails. Tools such as the free RVTools reports can be useful to quickly identify these: http://www.robware.net/ Check out http://www.symantec.com/business/support/index?page=content&id=HOWTO70902 for more information on RDM and NetBackup. The client/agent is often useful here.
(5) what is the main differences between this way and have agents on the virtual machines? wise management? problem restoring vmdk or? or what exactly
The biggest difference between the OnDemand and the approach of the policy of VMware is that it gets you files (agent) and the other gets you an image full virtual machine (vmdk) and you can also get the files in some operating systems. Alternatively, you can restore these backup files in many cases CBT/BLIB with VMware political is a great approach you can get images of computer virtual complete with increments
-
I have a subscription valid and active Leica camera.
How can I get Adobe to recognize? My creative cloud has expired. I'm frozen out of my photo library
Using the redemption code Leica I downloaded successfully updated day to day LR 6 but my LR library for 2015 and beyond now has a question mark, and I can't open the images.
Any suggestions?
Is this something that Adobe has to rectify?
Thank you
John
The question mark has nothing to do with your subscription at the end. The question mark on your records indicates that Lightroom cannot find the photos, because they have been moved or renamed, or delete outside of Lightroom. The instructions to fix it are: Adobe Lightroom - find folders and files moved or missing
-
I am currently working on a site that has the integration of Paypal which includes the page redirects (confirm or cancel). My goal is to have the implementation of site with a layout for desktop, Tablet and phone. My question is when I have a redirect page should I create a separate provision of the page for each device or just a provision of office that fits all three screen sizes? I hope that if the html page has the same name of the device (query) is automatically detected. Help with the help of Adobe Muse CC
By Payal integration, you mean paypal html button? or etc payment gateway configuration? If this is a configuration of the gateway to your site domain name then a single page with any structure will work, but if you use the button code for all associated formats then you will need to create separate pages for all.
Thank you
Sanjit
-
Cisco ACS to tool Migration of ISE
Hi all.
I am gtrying to migrate using the migration tool in our LABORATORY ACS 5.3 to ISE 1.2 and I take advantage of this error:
D:\migTool>migration.bat
log4j: WARN no such property [encoding] in com.cisco.acs.positron.migration.utils.Log4jTextAreaAppender.
INFO [main] MigrationApplicationDriver.main:56: applies from the main method.
Exception in thread "main" org.springframework.beans.factory.BeanDefinitionStoreException: cannot read the candidate class component: file [D:\migTool\bin\com\cisco\acs\positron\migra
tion\gui\components\treetable\JTreeTable.class]; nested exception is java.lang.ArrayIndexOutOfBoundsException: 3145
at org.springframework.context.annotation.ClassPathScanningCandidateComponentProvider.findCandidateComponents(ClassPathScanningCandidateComponentProvider.java:237)
at com.cisco.acs.positron.migration.MigrationApplicationDriver.main(MigrationApplicationDriver.java:61)
Caused by: java.lang.ArrayIndexOutOfBoundsException: 3145
at org.springframework.asm.ClassReader.readClass (unknown Source)
at org.springframework.asm.ClassReader.accept (unknown Source)
at org.springframework.asm.ClassReader.accept (unknown Source)
to org.springframework.core.type.classreading.SimpleMetadataReader.(SimpleMetadataReader.java:54)
at org.springframework.core.type.classreading.SimpleMetadataReaderFactory.getMetadataReader(SimpleMetadataReaderFactory.java:80)
at org.springframework.core.type.classreading.CachingMetadataReaderFactory.getMetadataReader(CachingMetadataReaderFactory.java:82)
at org.springframework.core.type.classreading.SimpleMetadataReaderFactory.getMetadataReader(SimpleMetadataReaderFactory.java:76)
at org.springframework.core.type.filter.AbstractTypeHierarchyTraversingFilter.match(AbstractTypeHierarchyTraversingFilter.java:105)
at org.springframework.core.type.filter.AbstractTypeHierarchyTraversingFilter.match(AbstractTypeHierarchyTraversingFilter.java:76)
at org.springframework.context.annotation.ClassPathScanningCandidateComponentProvider.isCandidateComponent(ClassPathScanningCandidateComponentProvider.java:280)
at org.springframework.context.annotation.ClassPathScanningCandidateComponentProvider.findCandidateComponents(ClassPathScanningCandidateComponentProvider.java:214)Hello Juan Carlos.
If your query is resolved, then mark them as response.
Thank you
-
ISE web auth for other than cisco switch (D-link 3528)
Is it possible to use ISE (posture inline node) to redirect to portal comments ISE wired users?
And wired users will get full network access after they pass the web auth.
Hello
Theoretically, it could work if the switch is able to send all the attributes in accounting packets, such as IP address and mac address by asking the station id. If the attributes are missing or incorrect, the iPEP ISE will never create the session (see show pep session table).
That said, who probably never have been tested, so you may want to reconsider your design, there is no guarantee that this can still work.
-
Update of connectivity for 10G VIC Cisco NAC 1225 Options
I currently have the opportunity to upgrade a server C220M3 UCS Intel standard 1 G of LOM to 10G and I'm looking at different ways to do this. It is a stand-alone UCS server running VMware.
Currently in this environment, it is not a port of uplink switch 10G which can be used to connect to a port of UCS 10 G, I'm looking how to fill at least 10G upgrade on the side of the UCS hardware and have this component completed, all having a period of transition from the connectivity of 1 G in the short term.
It seems that the 1225 VIC is the obvious choice to do this, as price wise, it is reasonable and it is fully featured, even though we only need 10 g ethernet (no FCoE in the short term).
An option I was looking at was to use the 1225dts model, this to support backward compatible with 1000BaseT, 10BaseT. However if it is an easy choice on UCS, Cisco do not seem to have modules of 10 G of copper on the side of the switch, except in specific models of the Nexus family. What limits our options of switching in the future (this excludes the use of 4500-x or 3850 s for example).
10G of fiber is an option, such as Twinax, but this brings me to my next questions.
1. it seems that, according to the data sheet of C220M3 to http://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-com... (see table 14) that the 1225 does not support Twinax. In fact, it is the only NIC and ANC listed who apparently can't stand, which seems odd. Is this correct, and what is the reason behind this? Is it a hardware problem, a software problem or a problem of documentation?
2. If Twinax Cisco is not an option, the 1225 does support 1 G SFP as the GLC-SX-MM?
3. it looks like the X 520 map for UCS might work, because I believe that it can work with dual rate 1 G / 10 G SFP. Someone has already tried this or have any comments on the way that those with UCS?
Thank you
Reuben
Yes, take a look at page 34 of the plug for this server, but the SPF only supported are 10G - SR and the FC8G-SW.
Do not forget to rate helpful answers
-
Source for the latest HUU for server rack Cisco
Hello, all!
I was looking around for the latest HUU pack for my aging servers rack of Cisco. These are the servers C210 M2 garden. The matrix made MMIC refers to a version 14.4 (s) - which I can't find anywhere to download. Is there a source for these packs of firmware and driver older?
If this is not viable, a package in the range 15.X will work on one of these servers C210? Maybe same 2.X?
Thanks for all the research!
Gregg
Greg,
Here is the link to the firmware:
http://software.Cisco.com/download/release.html?mdfid=283862069&flowid=2...
Here is the link for the drivers:
http://software.Cisco.com/download/release.html?mdfid=283862069&flowid=2...
HTH,
-Kenny
-
Initial installtion for firepower and cisco ASA
Hello
is there any clear guide to install the device VM firesight with integration of module power of fire ASA? I found some documents that explained the ASA device unit firesight recording. I did it properly. but I amd knows exactly how to create rules in firesight and apply it on the device of the asa.
Thanks in advance
Koffi bayet
Hi, Fabien,
This link would be useful.
To install the firepower on SAA
http://www.Cisco.com/c/en/us/support/docs/security/ASA-firepower-service...
To install the firepower on ESXI Management Center
http://www.Cisco.com/c/en/us/support/docs/security/firesight-management-...
Once you save the Manager module using the link below, you should be able to navigate and create/modify the policy strategy to establish rules for the module of firepower.
http://www.Cisco.com/c/en/us/support/docs/security/firesight-management-...
You can check this link for the example configuration of url filtering.
http://www.Cisco.com/c/en/us/support/docs/security/firesight-management-...
The fire power user guide has all the information
http://www.Cisco.com/c/en/us/TD/docs/security/firepower/601/configuratio...
Rate if helps.
Yogesh
-
Problem with the VPN site to site for the two cisco asa 5505
Starting with cisco asa. I wanted to do a vpn site-to site of cisco. I need help. I can't ping from site A to site B and vice versa.
Cisco Config asa1
interface Ethernet0/0
switchport access vlan 1
!
interface Ethernet0/1
switchport access vlan 2
!
interface Vlan1
nameif outside
security-level 0
IP address 172.xxx.xx.4 255.255.240.0
!
interface Vlan2
nameif inside
security-level 100
IP 192.168.60.2 255.255.255.0
!
passive FTP mode
network of the Lan_Outside object
192.168.60.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.1.0_24 object
subnet 192.168.1.0 255.255.255.0
network of the NETWORK_OBJ_192.168.60.0_24 object
192.168.60.0 subnet 255.255.255.0
object-group Protocol DM_INLINE_PROTOCOL_1
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_2
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_3
ip protocol object
icmp protocol object
Access extensive list ip 192.168.60.0 Outside_cryptomap allow 255.255.255.0 192.168.1.0 255.255.255.0
Outside_cryptomap list extended access allow DM_INLINE_PROTOCOL_3 of object-group a
Outside_access_in list extended access allow DM_INLINE_PROTOCOL_1 of object-group a
Inside_access_in list extended access allow DM_INLINE_PROTOCOL_2 of object-group a
network of the Lan_Outside object
NAT (inside, outside) interface dynamic dns
Access-group Outside_access_in in interface outside
Inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 172.110.xx.1 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication http LOCAL console
Enable http server
http 192.168.60.0 255.255.255.0 inside
http 96.xx.xx.222 255.255.255.255 outside
No snmp server location
No snmp Server contact
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto Outside_map 1 corresponds to the address Outside_cryptomap
card crypto Outside_map 1 set peer 96.88.75.222
card crypto Outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto Outside_map 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
Outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 allow outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
inside access managementdhcpd address 192.168.60.50 - 192.168.60.100 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
AnyConnect essentials
internal GroupPolicy_96.xx.xx.222 group strategy
attributes of Group Policy GroupPolicy_96.xx.xx.222
VPN-tunnel-Protocol ikev1, ikev2
username admin privilege 15 encrypted password f3UhLvUj1QsXsuK7
tunnel-group 96.xx.xx.222 type ipsec-l2l
tunnel-group 96.xx.xx.222 General-attributes
Group - default policy - GroupPolicy_96.xx.xx.222
96.XX.XX.222 group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
inspect the icmp error---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Cisco ASA 2 config
interface Ethernet0/0
switchport access vlan 1
!
interface Ethernet0/1
switchport access vlan 2
!
interface Vlan1
nameif outside
security-level 0
IP address 96.xx.xx.222 255.255.255.248
!
interface Vlan2
nameif inside
security-level 100
IP 192.168.1.254 255.255.255.0
!
passive FTP mode
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network of the Lan_Outside object
subnet 192.168.1.0 255.255.255.0
network of the NETWORK_OBJ_192.168.60.0_24 object
192.168.60.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.1.0_24 object
subnet 192.168.1.0 255.255.255.0
object-group Protocol DM_INLINE_PROTOCOL_1
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_2
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_3
ip protocol object
icmp protocol object
object-group Protocol DM_INLINE_PROTOCOL_4
ip protocol object
icmp protocol object
Outside_cryptomap list extended access allow DM_INLINE_PROTOCOL_2 of object-group 192.168.1.0 255.255.255.0 192.168.60.0 255.255.255.0
Outside_cryptomap list extended access allow DM_INLINE_PROTOCOL_3 of object-group a
Outside_access_in list extended access allow DM_INLINE_PROTOCOL_1 of object-group a
Inside_access_in list extended access allow DM_INLINE_PROTOCOL_4 of object-group a
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) static source NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.60.0_24 NETWORK_OBJ_192.168.60.0_24 non-proxy-arp-search of route static destination
!
network of the Lan_Outside object
dynamic NAT (all, outside) interface
Access-group Outside_access_in in interface outside
Inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 96.xx.xx.217 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication http LOCAL console
Enable http server
http 192.168.1.0 255.255.255.0 inside
http 172.xxx.xx.4 255.255.255.255 outside
No snmp server location
No snmp Server contact
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA-TRANS-aes - esp esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-TRANS-aes - esp esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA-TRANS esp - esp-sha-hmac
Crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transit
Crypto ipsec transform-set ikev1 ESP-DES-MD5-TRANS esp - esp-md5-hmac
Crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transit
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
card crypto Outside_map 1 corresponds to the address Outside_cryptomap
card crypto Outside_map 1 set peer 172.110.74.4
card crypto Outside_map 1 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto Outside_map 1 set ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
Outside_map interface card crypto outside
trustpool crypto ca policy
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 allow outside
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0dhcpd address 192.168.1.50 - 192.168.1.100 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
AnyConnect essentials
internal GroupPolicy_172.xxx.xx.4 group strategy
attributes of Group Policy GroupPolicy_172.xxx.xx.4
L2TP ipsec VPN-tunnel-Protocol ikev1, ikev2
username admin privilege 15 encrypted password f3UhLvUj1QsXsuK7
tunnel-group 172.xxx.xx.4 type ipsec-l2l
tunnel-group 172.xxx.xx.4 General-attributes
Group - default policy - GroupPolicy_172.xxx.xx.4
172.xxx.XX.4 group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
remote control-IKEv2 pre-shared-key authentication *.
pre-shared-key authentication local IKEv2 *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
inspect the icmp error
inspect the httpFor IKEv2 configuration: (example config, you can change to encryption, group,...)
-You must add the declaration of exemption nat (see previous answer).
-set your encryption domain ACLs:
access-list-TRAFFIC IPSEC allowed extended LOCAL REMOTE - LAN LAN ip
-Set the Phase 1:
Crypto ikev2 allow outside
IKEv2 crypto policy 10
3des encryption
the sha md5 integrity
Group 5
FRP sha
second life 86400-Set the Phase 2:
Crypto ipsec ikev2 ipsec IKEV2-PROPOSAL
Esp aes encryption protocol
Esp integrity sha-1 protocol-set the Group of tunnel
tunnel-group REMOTE-PUBLIC-IP type ipsec-l2l
REMOTE-PUBLIC-IP tunnel-group ipsec-attributes
IKEv2 authentication remote pre-shared-key cisco123
IKEv2 authentication local pre-shared-key cisco123-Define the encryption card
address for correspondence CRYPTOMAP 10 - TRAFFIC IPSEC crypto map
card crypto CRYPTOMAP 10 peer set REMOTE-PUBLIC-IP
card crypto CRYPTOMAP 10 set ipsec ikev2-IKEV2-PROPOSAL
CRYPTOMAP interface card crypto outside
crypto isakmp identity addressOn your config, you have all these commands but on your VPN config, you mix ikev1 and ikev2. You have also defined political different ikev2. Just do a bit of cleaning and reached agreement on a 1 strategy for the two site (encryption, hash,...)
Thank you
Maybe you are looking for
-
try to get iTunes to quit random play. nothing happens when I click on the word or icon shuffle. try to get it to play through the reading list
-
Firefox still crashing when I open Facebook page.
Firefox still crashing when I open Facebook page and crash that appear just after the report is in Greek (?!) I have an English version of Firefox.
-
Problem of memory on my Tecra S1
Hello: My Tecra S1 has been used for more than 4 years and returned to replace one of the RAMs because of the callback activity launched by Toshiba about 3 years ago. A few days ago the OS (XP) becomes very unstable and crashed. After playing with hi
-
Z1 HP - upgrade graphics card! Help, please!
Hello world. First of all I would like to say my knowledge of graphics cards is very limited so if you would be kind enough to explain things to me step by step. Thank you So I bought a Z1 - model WM427EA #ABU - and have already updated the RAM, I wa
-
Mouse buttons works only with Windows 7
Just returned from holiday, everything worked before but I try logging on to windows, and when you are prompted to select the profile that I cannot, after a while I finally get in but can not select anything on the desktop either. After a while, I st