Miix2 10: Boot from USB - Image-Backup

Similar Questions

• Flex 2 15 is no boot from usb stick w Win 7 image

  I recently bought a Flex 2 15 and want to install Win 7. I created a bootable Windows 7 USB drive with the Microsoft tool and it works very well. The problem is, no matter what I change in the Bios or Boot manager, the laptop does not boot from usb. All I get is the instalation of Win 8.1 normal.

  Anyone have any idea where the problem would be? Much appreciated!

  Problem found. Supposed to UEFI to legacy

• EliteBook 1040 2: Boot From USB

  I looked at some other posts about it, but they were not helpful and tried a hat with the support of HP, but it was pretty useless. Without knowing it, I created a problem on my new laptop using EaseUS Partition Master to create a new partition which converted the drive in Dynamic.I only mention this as it may be relevant to the current problem.

  Now I can not create a recovery USB and can't the disk image. I made a backup of Windows with the backup system. Currently I am trying to boot from a USB key that contains the Hirens Boot environment. I tried this UB in my Dell and who will start in the environment of Hiren. Anyway, I went into the BIOS, inheritance and set the boot order to boot from USB first, but the computer will not.

  Hello

  http://www.partition-tool.com/EASEUS-partition-manager/convert-dynamic-disk-to-basic-disk.htm

  This can help with the first part.

• Satellite A100-991 - cannot boot from USB device

  My Satellite A100-991 (MS Windows XP MCE, SP3) does not start from a USB key or USB hard drive. The same USB devices are bootable if they are connected to a desktop computer or a laptop from other manufacturers. I put the USB as the first boot device and use an image "Bart PE" on my USB device.

  In fact, I have installed 2.10 Phoenix Bios version and I wonder if I could update the BIOS by using the 'sa105v21.exe' program and that this would resolve the startup problem.

  Hello

  Have you tested different USB keys? I think that your current USB key is not compatible
  Also test the USB to different USB ports. A port may be defective for the computer to start t with him.

  Theoretically, you can try upgrading the BIOS but don t forget s a bit more risky and it should be the last step.
  Prior to this, load default settings in the BIOS and check if you can boot from USB.

• C50-A634 satellite will not boot from USB or DVD

  My new toshiba Satellite C50-A634 won't boot from usb or dvd,.
  I downloaded victory 8.1 and burn the image to a dvd but I always get an error message "no boot... device please restart."

  Can you please help?

  Hello

  Startup mode of the change in the BIOS settings and you should be able to use the optical drive as first boot device - http://aps2.toshiba-tro.de/kb0/TSB2C03F80002R01.htm

• Portege R500-12 s - problem of recovery (Boot from USB)

  Hello

  I tried several days reinstall this laptop (Toshiba PORTÉGÉ R500-12 s). I reinstall drive, but it has no CD-ROM included, so I'm fighting with booting from the USB port, with my external hard drive. Those that the BIOS loads even boot from USB? Because there is no alternative USB inside the boot priority. I noticed that I can choose from, what I think is alternative of different startup in start up, when I press the F12 key. When I press the F12 key and choose USB, I just pup up to a similar cmd command line.

  Reinstall is the only option because my laptop is super slow, and I have no restore file (CD) on my laptop

  Ultimately is it possible to reinstall windows via USB boot, or do I have to buy an external CD-ROM drive? Which is the last thing I want to do. Advice or assistance on how I'm going to do this?

  Thanks in advance :-)

  I put t know if this is possible, but if you can visit Toshiba service in your city, ask them for help. They have all the external devices and also external optical drive.
  Buy a coffee and ask if they can install just image recovery using your recovery DVDs. I m that they will help you with this.

  By the way: you can not install OS using the recovery saved on the HARD disk image. Laptop can't see it.
  What you need is the optical disk drive.
  Also, try to borrow a somewhere.

• Booting from USB or USB-Flash on Qosmio G30?

  I would like to boot from a USB key with a PE Builder built the Image on my USB key. Is this possible? I can't find an option to boot from USB Stick. Drive HARD to the CD, LAN, only.

  I prefer this option to browse without risk of viruses, worms, adware...

  Please help me.

  Unfortunately, don t BIOS supports booting from the USB key or USB.
  You can boot from USB FDD, 1st/2nd HDD, ODD, or Network (LAN)

• Can't boot from USB or DVD. HP Pavilion g6 - 2257sr

  My new laptop HP Pavilion g6 - 2257sr doesn't let me boot from USB device.

  The laptop computer startup, I pressed ESC and F10. Then I put in place the order of startup UFEI - USB-device / DVD / OS selector.

  I use the official Windows 7 disc and several own USB devices with bootable images.

  But rebboting use OS hard drive provided.

  Help, please. I want to delete the current operating system on my laptop.

  Hello:

  I have a set of recovery first disks before continuing.

  To start the PC, you must go into the BIOS and enable the legacy mode.

  Then you should be able to boot from another device.

• Update the BIOS to boot from USB on a Satellite P20

  Hi all

  I would like to be able to boot to a USB with my P20 drive. However, upgrades to the bios, which I find to PSP26 reference date of the 2004 numbers, a few months older than my laptop itself - which the BIOS does not have the USB boot. This means that there is no available uograde newest BIOS?

  In addition, the 'trad' updated BIOS available for PSP26 zip file contains one... of files windows self-extracting (?), rather than the usual set of files including a CD iso image. (But in any case, it is very old...)

  See you soon
  OJEC

  Boot from USB HDD or USB stick is not possible and the BIOS update wil not help you!
  You can start only the HDD, ODD (CD/DVD), LAN or USB FDD

  Greetings

• Can't boot from USB on laptop Acer NC-V5-571. another boot enabled is bios and I tried option in W8

  Can't boot from USB on laptop Acer NC-V5-571. another boot enabled is bios, but and I tried to boot from usb DVD etc. (starting from things that works on other PCs. I've set USB and DVD as a priority higher from startup in the BIOS. I get the alternative start menu, choose DVD or USB, but it starts just Windows 8.

  I tried to boot from an external device in settings PC - general settings in the charming bar, but it starts off directly with Windows 8 too.  the DVD plays fine films, and if I plug the boot device dvd W8 sees them and their content because I expect too much.

  Any ideas on how to boot from another device.  I would like to take at least a decent backup using Acronis.

  Thanks in advance for any help

  Ted

  Boot from an additional media under Windows 8, you will ensure that you have either disabled Secure Boot or changed to UEFI in the traditional mode.  The following articles describe how to do this.

  Passing UEFI BIOS mode to legacy

  How to enable or disable secure boot

• How to boot from USB-drive on Compaq Presario CQ57 400SO

  Hello!

  I have a Compaq Presario CQ57-400SO I want to install Windows XP instead of Windows 7, which is included. I had two questions now since I hit a few bumps.

  1 at - not, at all, driver support for Windows XP to get their hands on?

  2. How am I suppose to boot from USB (my DVD-ROM is broken)?

  + Have converted my installation of Windows XP on USB disk.

  -J' have tried to change the boot order, and no, the USB is not marked with! so it should work.

  -J' tried by pressing F9, that gets me the Boot Option menu. But once I press the USB it goes right to the Windows (the pre-installed).

  Thank you in advance.

  Kind regards

  Robin

  Hi @kvartsnorsk

  Welcome to the Forums of HP Support!

  I know that you are looking for drivers for Windows XP, unfortunately, this laptop was not sold configured for this OS. Drivers are available for windows 7 and 8 (32 and 64 bit)

  What happens if I do not see my operating system?

  On the boot USB device, it is likely that your bootable usb image isn't UEFI, so you should enable legacy boot in the BIOS to allow boot off this device.

  UEFI and the Start Menu

  The Legacy Boot mode - NeoSmart Knowledgebase

• Z90DE7 no boot from USB

  Z90DE7 no boot from USB

  I have one,

  Reference Dell Wyse - Z90DE7 - 16G FLASH 2 GB RAM - Dual Core

  I followed the:
  USB_Firmware_Tool_1.20.0.1_Users_Guide_SEP2013.PDF - WYSE

  Downloaded the: Wyse USB Firmware Tool (87.5 MB) 1.20.0.1
  Extracts in C: / / drive

  BZB0_0858_8192.exe uploaded Image
  Excerpt from Image in C: / / drive

  Run the Firmware as Administrator utility:

  -Configure the USB copy or pull or button push/update Firmware
  -Windows embedded standard 7
  -Choose the operating system, BIOS, CMOS
  -Deselection Preserve data partition
  -Navigate to the .rsp file, open
  -to select USB
  -Press on next
  -Press done

  Allow to boot from USB in the Advanced Menu.

  Load USB in customer Think - restart
  -Press p until the unique start menu appears
  -Select a USB drive

  From there it does not start, try to start and goes directly back to the one time boot menu,
  I have no idea why it happens that I followed all the instructions to a T
  Tried another USB and boots but just get a black screen with a note telling GRUB

  I tried formatting the first USB, before using the firmware utility.
  1: 64GB Dive Tunb - is not start load back to the unique boot menu.
  02:16 GB thumb diving - loads Grub.
  3: 8 GB USB key - does nothing.

  Any advice?

  Hi all

  Im having problems playing audio from Web sites. I hear sounds when you play a video in windows media player, but not what anyone else. Im a C90LEW running and connecting to a virtual windows 7 OS on Server 2008. I can't seem to find the drivers that could help and there is nothing in the FAQ or in the forum. Am I missing something really simple?

  We offer a guaranteed success for pass4sure exam with the help of the latest certification security + and questions of practice of The University of Connecticut and security reviews ISEB& ccie University of Pennsylvania.

• Unable to boot from USB 3.0 E430

  Hello community!

  I recently got a ThinkPad E430, and I love it.  I have a minor problem with the boot.

  As a Linux user, I regularly boot from usb and cd while trying different distributions and whatnot.  However, I discovered that I can't boot from my USB 3.0 ports.  Not only that, but my computer does not start if I have nothing plugged into them.

  I first thought that I had faked my dd command in the transfer of the image, but the usb key works from the 2.0 port. So I thought maybe it was the usb key itself, but this happens with all my usb 2.0 flash drives and 3.0.

  I noticed a recent bios update a few days, but I don't want to go through the trouble, if she does not really bring all the benefits.  Actually looking at the itt changelog says that it only supports to the B430.

  I guess I would really just know if others in the face of this problem.  Thank you!

  My E430 fine boots of USB3.0 ports.

• Boot from USB

  Hello.

  I have a Pavilion p6720f desktop computer.  I want to boot from USB.  I just updated the BIOS that had supposedly fixed issues with the USB to boot. But there is no option in the cmos configuration in the for USB BOOT sequence.  The options are HD, CD, DISK, and NETWORK.  Any suggestions?

  OK PROBLEM SOLVED

  Plug the USB pen into a USB port of your PC (even the work of the port on the front)

  Reset

  Press < ESC > during startup to win the "Boot Menu" (or F12 etc. According to your PC)

  The USB pen is now listed (SanDisk in my case)

  Select it

  Press enter

  Linux starts fine

  Tell your wife or girlfriend, that she is no longer dumped

  Enjoy!

• Toshiba NB520 - can't boot from USB

  I NB520, I tried possible ways to boot from usb and it still does not work.
  I need some suggestions.
  Thank you.

  Usually the name of the USB device does not appear in the start menu.
  If you want to run rom flash USB memory key, you need to connect the USB flash first.
  Press the power button, then F12 and select USB.

  But note: USB flash memory stick must be ready for start-up.
  If it was not made "bootable" and then the boot from USB does not work.