Mijn Dvd-RW-station (E :) laat couriers next mededeling zien:plaats een cd.) While er al een cd inzit.

Similar Questions

• Booklet: Question about DVD docking station

  IM new to computers
  The booklet and the dvd docking station
  When transporting the computer you will need to carry the docking station, if you are using DVDs.
  The computer keeps the cradle in place while on the move as an all in one device?
  Thank you

  Hello

  Yes the Docker and laptop are 2 separate elements which can be locked together and remain together until you unlock them. They can be transported as a single unit or 2 separate. Its a very good design as it all works as a single unit with the battery powering the two units. You need to distribute the docking station, if you want to use the DVD player but its not that heavy and much smaller than some portable DVD players

• HDV - DVD - need help to determine my next course of action.

  I'm trying to change my project in HD... in CS4 on MacPro.

  In the end, I just burn a DVD using still or iDVD.

  What settings should I export to?

  I want to of course the highest quality before burning the DVD and there must be a file that can be burned to DVD.

  I'm not very well informed on all formats in the Menu export.

  Can someone give me the straight dope on the export of HD sequences that will be burned to DVD?

  Thanks guys, your support means a lot.

  Tutorial HD to SD w/CS4 http://bellunevideo.com/tutorials/CS4_HD2SD/CS4_HD2SD.html

• My turbo g telstra network next cut in and out constantly while I'm internet n and it is quite hard sometimes actually get internet.

  Network

  What version of Windows?

  Who is your Internet service provider?

  Are there DNS errors and / or warnings in the event viewer?

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• How to remove the dvd of s3260.nl station

  I want to watch if the plug sata on the motherboard of the desktop is connected correctly.

  Because the DVD station does not work.

  But the DVD itself station is in front of this connector.

  I have no idea how to do to remove this DVD station, remove the two screws does not.

  It is a HP Pavilion slimline computer, filled with s3260.nl, in which the material is very densily.

  Hello

  See the HP document on the following link for a procedure step by step on the removal of the optical drive.

  http://support.HP.com/us-en/document/c01049980

  Kind regards

  DP - K

• I see additional cd station in the computer section, while I only have one dvd station

  Hello

  When I have OCD stations computer stationspen I see 2 cd while I have only 1 dvd rw station.

  the first is the station DVD RW (e :)) which is the only station DWD on my laptop and I see nested one with a name)

  CD STATION (f) think I finfd is very strange.    how it's this extra cd station, when I look on this properties, I see only one dvd station.

  y at - it an explanation for that how it is this strange cd station.

  I want to say also, I installed synology NAS via my computer, but I don't think that this has nothing to do with this strange cd station.

  Thank you

  Johan

  Hello Johan,.

  Thank you for your response. Please update us if your problem is resolved. If not, reply with the status of the issue. We will be happy to help you.

• Softwareprobleem DVD-player, spelletjes op meer niet starten.

  Beste vista-kenners,

  Nagezien material of the Dvd-Player via start > configuratiescherm > systeembeheer > Computerbeheer > apparaatbeheer met als results geen geel uitroepteken in een dvd-player works goed dat statement!

  Dan Als ik via start > computer > naar dvd-rw-station ga zien zie ik mijn inziens iets heel raar, surroundings, ik zie above dvd-rw-station linkeronderhoek tweekoppige symbolisering van famieliale beveiliging Haag of zoiets accounts?

  Kan daar iemand iets van maken aub?

  MVG

  Ideas:

  • U die of programming problems met lapses
  • Foutmeldingen
  • Recent p die u in uw computer
  • Wat I al geprobeerd om het vast clean would you stellen

  I'm sorry, but these Vista Help Forums only provide support in English.

  http://support.Microsoft.com/common/international.aspx

  To ensure that you receive support appropriate for your location information, select your region setting in the list on the link above and then click the arrow button.

  Thank you.

  Mick Murphy - Microsoft partner

• Satellite Pro M30 - cannot burn CD/DVDs

  Hello!

  Since I got my machine, I was not able to burn CDs or DVDs either. I get a 'power calibration error' that normally I guess means the disc broke. But, because it is a whole new drive (less then a month) and it can read all CD and DVD I throw at it, I doubt that it's a hardware problem. After a few minutes of Googling, I came across a thread made by other people encounter the same problem with this same drive (Mat * a UJ - 820 s), but no good solution (at least none that worked for me).

  Here is a log from Nero (6.6.0.1 (also tried older versions)). I hope this is of some use, because this is getting very frustrating... Thank you.

  Windows XP 5.1
  IA32
  WinAspi: -.
  Ahead WinASPI: file 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver = 2.0.1.68, size = 160016 bytes, created 28/07/2004 16:51:12
  Nero version: 6.6.0.1
  Recorder: Version: 1.00 - HA 1 YOUR 0 - 6.6.0.1
  Adapter driver: HA 1
  Drive buffer: 2048kB
  Bus type: default (0)-> ATAPI, detected: ATAPI
  CD-ROM: Version: 1.00 - HA 1 YOUR 0 - 6.6.0.1
  Adapter driver: HA 1

  = Scsi-device-map =.
  DiskPeripheral: IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: on
  CdRomPeripheral: MAST * A DVD-RAM UJ-820 s atapi Port 1 ID 0 DMA: on
  CdRomPeripheral: Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off

  = CDRom-Device-map =.
  CARPET * a DVD-RAM UJ-820 s D: CDRom0
  Generic DVD-ROM E: CDRom1
  =======================

  AutoRun: 1
  Excluded drive IDs:
  WriteBufferSize: 74448896 (0) byte
  ShowDrvBufStat: 0
  BUFE: 0
  Physical memory: 510 MB (523184 KB)
  Free physical memory: 228MB (233560kB)
  Memory in use: 55%
  QUERIES PFiles: 0x0
  Static write speed table: 0
  Use consultation: 1
  Global Bus type: default (0)
  Control supported media: disabled (0)

  4.11.2004
  CD-ROM (ISO)
  14:02:51 #1 text 0 file Isodoc.cpp, line 6165
  ISO document burn settings
  ------------------------------------------
  Determine maximum speed: FALSE
  Simulate: FALSE
  Write: TRUE
  Finalize the CD: FAKE
  Multisession: TRUE
  Multisession type: Start multisession
  Burning mode: TAO
  Mode : 1
  ISO level: 1 (Max. of 11 = 8 + 3 char)
  Character set: ISO 9660
  Joliet: TRUE
  Allow pathdepth more than 8 directories: TRUE
  Allow more than 255 characters in path: TRUE
  Write ISO9660; 1 file extensions: TRUE

  14:02:51 text 0 file Burncd.cpp, line 2832 #2
  CARPET * A DVD - RAM UJ-820 S
  Protection against the imbedding of buffer enabled

  14:02:51 #3 text 0 file Reader.cpp, line 127
  Player running

  14:02:51 #4 text 0 file Writer.cpp, line 122
  Writer MATT * A DVD-RAM UJ-820 s running

  14:02:51 #5 ISO9660GEN-11 file geniso.cpp, line 3286
  First address writeable = 0 (0x00000000)

  14:02:51 #6 text 0 file Burncd.cpp, line 3117
  Turn on Track-at-once, using CD-R/RW media

  14:02:51 #7 Text 0 File DlgWaitCD.cpp, line 256
  Last possible write address on media: 359845 (79:59.70)
  Last address to be written: 51106 (11:23.31)

  14:02:51 #8 Text 0 File DlgWaitCD.cpp, line 268
  Write in overburning mode: No. (enabled: CD)

  14:02:51 #9 Text 0 File DlgWaitCD.cpp, line 2309
  Recorder: MAST * a DVD-RAM UJ-820 s;
  CDR code: 00 97 26 66; Entry YSOS of: CMC Magnetics Corporation
  ATIP data:
  Special Info [hex] 1: D0 00 98, 1 a 2: 61 42 (LI 97:26.66), 3: 4F 3 b 47 (LO 79:59.71)
  Additional info [hex] 01:00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

  14:02:51 #10 Text 0 File DlgWaitCD.cpp, line 430
  > Protocol of DlgWaitCD activities:
  =========================================

  14:02:51 Text 0 File ThreadedTransferInterface.cpp, Line 844 #11
  CIS (after recorder preparation)
  0: TRM_DATA_MODE1)
  2 indices, index0 (150) not provided
  #0 + 51107 (51107) original disc POS = #51107 / 11:21.32
  relocatable, pos to drive for the cache-write implementation not required / not required, no patch infos
  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 51105 blocks [MAST * a DVD-RAM UJ-820 s]
  --------------------------------------------------------------

  14:02:51 #12 text 0 file ThreadedTransferInterface.cpp, line 1047
  Prepare recorder [MAST * a DVD-RAM UJ-820 s] for write in TAO
  DAO infos:
  ==========
  MCN:
  TOCType: 0x00; Closed disc, session not obsessed
  Tracks 1 to 1:
  1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 307200 104974336, ISRC ""
  Introduction DAO:
  ===========
  __Start_ | ___Track_ | _Idx_ | _RecDep_ | _CtrlAdr_
  -150 | Lead-in | 0 | 0x00 | 0x41
  -150 | 1. 0 | 0x00 | 0x41
  0 | 1. 1. 0x00 | 0x41
  51107 | Lead-out | 1. 0x00 | 0x41

  14:02:51 text 0 file ThreadedTransferInterface.cpp, line 1096 #13
  Removed 2 blocks from end of track 1. Length: 51107-> 51105.

  14:02:52 #14 phase 24 file dlgbrnst.cpp, line 1853
  Caching of files started

  14:02:52 #15 text 0 file Burncd.cpp, line 4003
  Cache writing successful.

  14:02:52 #16 phase 25 file dlgbrnst.cpp, line 1853
  Caching of files completed

  14:02:52 #17 phase 36 file dlgbrnst.cpp, line 1853
  Burn process started at 16 x (2 400 KB/s)

  14:02:52 #18 text 0 file ThreadedTransferInterface.cpp, line 2497
  Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

  14:02:52 #19 text 0 file Mmc.cpp, line 20673
  Set BUFE: Protection against embedding of stamp-> ON

  14:03:11 #20 SCSI-1106 file Cdrdrv.cpp, line 1432
  SCSI Exec, HA 1, YOU 0, LUN 0, buffer 0x03D90000
  Status: 0x04 (0x01, SCSI_ERR)
  HA-status 0x00 (0x00, OK)
  TA - status 0 x 02 (0x01, SCSI_TASTATUS_CHKCOND)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Detect Code: 0 x 73
  Meaning of Qual: 0x03
  CDB data: 0x2A 0x00 0x00 0x00 0 x 01 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
  Sense data: 0xF1 00 x 0 0 x 03 0xFF 0xFF 0xFF 0x6A 0x0A
  0x00 0x00 0 x 15 11 0 x 0 x 73 0x03

  14:03:11 #21 CDR-1106 file Writer.cpp, line 311
  Power calibration error

  14:03:11 #22 text 0 file ThreadedTransfer.cpp, line 229
  all writers idle, stopping conversion

  14:03:12 #23 text 0 file ThreadedTransfer.cpp, line 223
  conversion idle, stopping reader

  14:03:12 #24 CDR - 201 file WriterStatus.cpp, line 200
  Invalid write state
  CARPET * A DVD - RAM UJ-820S\H1 T0

  14:03:12 #25 TRANSFER file-18 WriterStatus.cpp, line 200
  Could not perform PlageFin

  14:03:12 #26 text 0 file Mmc.cpp, line 15477
  start closing a Session

  14:03:12 #27 SCSI-1106 file Cdrdrv.cpp, line 1178
  SCSI Exec, HA 1, YOU 0, LUN 0
  Status: 0x04 (0x01, SCSI_ERR)
  HA-status 0x00 (0x00, OK)
  TA - status 0 x 02 (0x01, SCSI_TASTATUS_CHKCOND)
  Key: 0x03 (KEY_MEDIUM_ERROR)
  Detect Code: 0 x 73
  Meaning of Qual: 0x03
  CDB data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
  Sense data: 0 x 70 0x00 0x03 0x00 0x00 0x00 0 x 00 0x0A
  0x00 0x00 0 x 15 11 0 x 0 x 73 0x03

  14:03:12 #28 CDR-1106 file WriterStatus.cpp, line 249
  Power calibration error

  14:03:12 #29 TRANSFER file-19 WriterStatus.cpp, line 249
  Could not perform fixation

  14:03:12 #30 text 0 file WriterStatus.cpp, line 258
  falling back to disc fixation

  14:03:12 #31 Text 0 File dlgbrnst.cpp, Line 1711
  Set remaining time: 0:00,000 (0ms)-> OK

  14:03:12 #32 phase 38 file dlgbrnst.cpp, line 1853
  Burn process failed at 16 x (2 400 KB/s)

  Existing drivers:
  File ' Drivers\PXHELP20. SYS: Ver = 2.02.62a, size = 20016 bytes, created 28/10/2003 11:02 (Prassi/Veritas driver for win 2 K)
  File 'Drivers\atapi.sys': Ver = 5.1.2600.2180 (xpsp_sp2_rtm.040803 - 2158), size = 95360 bytes, created 03/08/2004 21:59:44 (driver for rec)

  Registry keys:
  HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs: 0 (Security Option)

  Here's how I just fixed my misfortunes:

  In short: go to controller - device manager and select IDE ATA/ATAPI: try to change only "PIO" mode instead of "Ultra DMA Mode" on the IDE channel that uses your DVD player, namely the secondary IDE channel (since 1 is probably your drive). It should say "Location 1" on the tab where the reader is NOT zero.

  Ultra-DMA is obviously more recent and faster and better, but I think that it infiltrates the specified performance of the PIO-mode. It took me about 10 minutes to write about 3 gigs.

  (1) uninstall manually each device driver that seemed even remotely connected to the "Mat * one" or "DVD" or "CD" INCLUDING "Standard dual channel PCI IDE Controller" and "secondary IDE channel".

  (2) to ensure a hard reboot (power off)

  (3) Windows to automatically detect any material it appears after reboot begins

  (4) one of these elements has been the "secondary IDE channel"... or in any case... go to Panel of-> system-> hardware: secondary IDE channel.
  b change of "Ultra DMA mode" "PIO" mode only

  (5) go to control panel-> hardware-> device-> IDE ATA controllers Manager / ATAPI-> secondary IDE channel: Transfer Mode = "PIO only" to ensure that this relocation, you just live kept this adjustment, otherwise set it as such and again, DO NOT change your "location 0" define, show your secondary ide channel tab should say "location 1". "

  (5) - hard reboot again

  (6) the system should come in and automatically detect your CD-ROM / DVD-ROM / Optical Drive / DVD - RAM drive both at the next reboot.

  It should then work.

• Pavilion dv7: DVD not to be read in the drive.

  No reason apparent that my HP Pavilion dv7 stopped reading DVD, it worked one day, the next whirred just and nothing. There seems to be no mention of the 'computer' drive that says "Devices with removable storage" etc, either. There is no error message and I don't think that I have accidentally can I do something for this set.

  We have the complete model number, please? Can it read CDs? Sometimes one of the lasers is bad and the drive must be replaced. It can also be a software problem, but a way to quickly check is to try to boot from a bootable DVD as a Windows install disc or HP recovery disk. If it is unable to boot from DVD it means it's a hardware problem. Replacement disks are low-cost, perhaps $35 or more and super easy to replace. Generally a screw must be removed from the slipped disc and the IPLs of replacement in, live replaced.

  Post back with the model number and identify the country you live and plastics color laptop and we can help you further.

• CD/dvd not dΘmarre automatically after Windows update 10

  Hello!

  After the Windows 10 update of cd and dvd are not more recognized. There is no Autostart upward. Nothing happens when I enter a disk in my dvd-rw-station. That used to work well before windows 10. Install VLC MediaPlayer something does not work because the dvd / cd doesn't even start.

  Who knows a simple solution to this problem?

  Thank you very much!

  iTunes or DVD burning software may be causing the problem. uninstall / update this software.

• Portege R500 - CD/DVD drive no longer works

  Does anyone found a resolution to this?

  Like David, my DVD Multidrive on my R500 abruptly arrested recently - I can open/close the player, but he does not appear in Windows Explorer as a disk is valid. Do not think that I have nothing installed on the machine.

  Interestingly, I never really use the DVD player. Indeed, because of all the * heat * questions, I used to "Power Off" of the device, via the DVD icon in the system tray (i.e. option enabled me to Power on / off the unit). So while the power was OFF, it's cold the machine, and so the fan was rarely on.

  Now that my computer no longer recognizes the drive, this icon it simply shows that disabled, no possibility to the power on/off switch, and this noisy fan is almost always on. In addition, because it seems that the machine tries to recognize the drive subject time at startup, all re-start, reboot the machine now takes a few minutes to start...

  For the optical drive firmware update help? Or is there some other fix?

  Hello

  > but my Portege R500 CD/DVD drive has stopped working the next day, I had attached an external CD - RW drive for me to burn discs. Maybe it did disable my built-in drive?
  This could be the key;
  Try to access the Device Manager and remove the CD/DVD player listed and all USB host controllers and USB root hub.

  Again, restart the laptop.
  After new check restart if the CD/DVD drive has been recognized again.

• Libretto U100: Powers Docking Station is no longer in place

  Hi, I recently bought a U100 (finally updated my CT 100!). I have the reader Multi DVD docking station, which worked well at first, but now it is no longer lights up when I anchor my machine.

  The green light on the side of the eject button is still on, but that's all. I follow the instructions, no power, no son ties etc, but still nothing. The manual talks about turn on the drive icon on the taskbar optical media. I didn't do it and cannot find any mention of anywhere.

  Help, please!

  Hello

  On this path, it is not easy to say what is happening with your booklet. I put t know how is your personal configuration and if there is something on the device that has a negative impact on any type of functionality.

  If you said it was worked well I recommend you to retrieve the device with the recovery media.
  You are able to open the DVD - rom?

  Drive icon of optical media on the taskbar is probably the icon of CD/DVD Drive Acoustic silencer and it can make the drive quietly.

• HP 2000-2b09WM Notebook PC: Recovery DVD/USB for HP 2000 - 2b09WM, laptop, 320 GB hard drive.

  Greetings.

  I want to restore my laptop HP 2000 - 2b09WM to factory settings, using a restore disk drive or USB.

  Where can I find the disc, iso image or file?

  I can't find on the site of HP, although I found it there before.

  The best solution is to download an image of a DVD, burn myself.

  The next best is to get the HP recovery disk, I can't seem to find it.

  Thank you.

  RCline7

  Hello

  There are two options available.

  1. you can order a set of replacement of the recovery media using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  Note:  If the link above does not work (it is not for me at the moment), try calling HP directly.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  2 another option would be to download the Image of Windows 8 on the following link - Note this Image file is subject to a ceiling of download, you may need to try over a period of a few hours before the download starts correctly.

  https://docs.Google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?PLI=1

  Use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.

  If you instead create a flashdrive bootable for this Image, try the free app below.

  http://Rufus.AKEO.IE/

  The product key for Windows 8 is encrypted in your bios chip and read automatically during installation.

  Software extra and you may need drivers are by entering your full model number or Nr here.

  Kind regards

  DP - K

• P042 Pavilion15: CD/DVD does not not on hp pavilion15 p042

  Good afternoon

  I have problems with the dvd-cdrom station that does not start:

  Qualities:

  HP DVDRAM GU 90N

  Apparaattype: DVD - / CD-Rom-Stations

  Leveranciuer: (CD-Rom Standard Stations)

  Location: Bus n ° 1, Target Id 0, LUN 0

  Apparaatstatus: Kan says expensive niet starten.

  omdat configuratiegegevens in het register onvolledig beschadigd zijn (code 19)

  Driver is up to date.

  Can you help me solve the problem.

  Thanks in advance

  Hello:

  See if you perform each of the steps in resolution 2, 3, 4 and 5, from the link below solves the problem.

  One of them will usually be.

  http://support.Microsoft.com/kb/314060

• Can I use an existing Windows 7 Professional Upgrade DVD for Windows 7 Professional upgrade using the keys I bought instead of loading down?

  I've updated three of my computers from Windows XP Professional for Window 7 Professional using kits of DVD I bought. I have three sets of Window 7 professional DVD in my possession. I bought a new license [facility provided by Microsoft key] for my ThinkPad. I ordered also accompanying the DVD, which I imagine will happen next week. Rather than wait for the DVD, can I use one of my existing 32 Bit Windows DVD for installation to upgrade with the new license key that I got from Microsoft?

  No problem - but you might want to wait, if your existing DVD is the original version, because a new will have SP1 integrated, so it'll even some hassles :)