Mini 110 1020nr Driver Sound?

I have recently reinstalled

Windows XP Edition sp2 family  (on my)

HP mini 110 1020NR

I had to reinstall the drivers manually. I installed the chipset ethenet, graphics and sound. Everything is sensitive as it should, except my sound. When I try to play a song on my WMP, you receive an error message:

Windows Media Player cannot play the file because there is a problem with the audio device. There may be a sound device installed on your computer, it can be used by a program or it is not working properly.

I made no changes to this laptop, except a few audio driver installation to test a resolution and an installation of Realtek of the ".com" and yet no solution. No, there is an icon on the lower right, which shows that I have an option for sound operation. I tried to test for sound and the laptop is a mute.

Any suggestions?
Thank you.


I found this one. I uninstalled all forms of audio from the Device Manager. With success, divided by the number zero. Subsequently, I installed xp SP3 patch Driver HP section:

Who sets a windows sp2 error was... Reinstalled audio IDT from here. Its an .exe file, ready to download for installation of equipment IDT grateful.


Then restarted my pc and I have sound now. Thank you all for helping me with my delema.

Tags: Notebooks

Similar Questions

  • HP Mini 110 (XP) - no sound after reinstallation

    Hello! I have a problem after reinstalling my HP Mini 110 and would appreciatte any comment on that.

    I formatted the pc and installed a new version of XP Home edition (SP2).
    Everything went very smooth and all the drivers where installed (downloaded from the HP driver support site).

    Video, network, Intel Wifi chipset, Bios, everything works like a charm... expect for AUDIO.

    I installed the driver IDT, but at the start of the installation it says something in the sense of "your audio device is not supported by this installer" and stops.

    I tried with several different drivers (all from HP site) with no luck.

    Another thing that caught my attention, it's that there is no audio device in the "material management" tab of the system... No sound card is detected! It seems really weird to me...

    What could be the problem? Clues? I must point out that the format of the sound card worked perfectly.

    My computer is a HP Mini 110 (LA 1020).

    $ 1 million for any feedback thanks!


    Well Finally I solved it. !!

    The thing is simple... As soon as I installed SP3, the material was detected and drivers accepted without problem.

    Storms XP SP2 will NOT work with the IDT audio device. Just updated to SP3 and immediately the sound card started working.

    Thank you Paul for your entry in the last few posts.

    See you soon!


  • Mini 110 and driver OfficeJet Pro 8500 wireless

    I have an OfficeJet Pro 8500 909 g installed a few months, and it works very well with three laptops from Dell and a Dell desktop computer using the wireless connection.  Then, I bought an HP Mini 110 and tried to install the drivers for the 8500 from the disk provided with the 8500.  During the system check that the installer has determined that the screen resolution of 1024 x 576 of the Mini 110 was insufficient and demanded a screen resolution pass at 800 x 600.  Tried installing online - same problem w / ground 1024 x 576.  Got in a chat online with an HP technician - it offered to download and install the HP DeskJet 990c driver and gave me clear instructions on how to do so, claiming that he was 'the solution '.  While I am has not opposed in principle to 'the solution', I asked too many questions and either it bailed out put or the session has expired.

    The questions are:

    (1) the 990 c driver is actually a viable solution?  Some other threads I've read indicate that "mixing and matching" printers and drivers can have unexpected and unwanted results.

    (2) I've read how to 'force' a change of screen resolution of 800 x 600, which probably (?) will I would install the 8500 drivers - but what happens if I change the sdcreen back to 1024 x 576 ground?  The ration of aspect printer or the print size or appearance get all messed up?

    (3) why does it matter even the resolution of the screen?  Is it a question of WYSIWYG?  If it does so then 1024 x 576 ground is going to be a problem w / almost any printer, is not?

    Thanks for any help you can give.


    The software requires a minimum of 800 x 600 resolution so that the HP software can be completely visible on the screen. If the vertical resolution is less than 600, then there is a chance of the window not being is not completely visible, and so you may have problems using the scanner software. Follow the document below to force the resolution to 800 x 600 temporarily to install the software. Once you change the resolution back to the native, the software will work, but the window CAN be cut and not be entirely visible.

    Click here

  • HP MIni 110-3135DX: Driver PCI for Windows 10

    Driver missing for PC

    in the device settings have yellow mark

    Properties on the shows - PCI Device

    I'm sorry that this driver has not worked.

    In these conditions, the only suggestion I can offer would be to install the support page Realtek card reader driver and the driver of your laptop.

    Install the driver manually if auto installation does not work.

    This package contains the installation files for driver for the Realtek card reader for laptops models and operating systems.

    File name: sp49599.exe

  • HP Mini 110-3529TU: driver WLAN install HP Mini 110-3529TU

    Hello all, basically I have the same problem like this thread here:

    Installed my laptop a new Windows 7 Ultimate 64 bit, I searched the internet for the drivers of my laptop and installed everything fine except for the wireless lan driver. When I installed the WLAN driver just unload its contents and continued the installation... I went to the folder click on Setup.exe or Install.exe but the Installshield cannot continue and will not be finished (installation of green thingy) loading, command prompt will suddenly pops out and close and yet once and just nothing happens...

    Regarding my computer laptop controller hardware id network, heres 4 lines:

    PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C & REV_01
    PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C
    PCI\VEN_14E4 & DEV_4727 & CC_028000
    PCI\VEN_14E4 & DEV_4727 & CC_0280


    You need this driver...

    This package contains drivers for the Broadcom Wireless LAN Server supported in models cards mobile supported and operating systems.

    File name: sp57965.exe

  • HP MINI 110 1020NR: error fatal system stopped CNU9282C7H NEED to PASSWORD THANKS




    Enter: e9lo7u7exz (3rd character is a lowercase L

    Kind regards

    DP - K

  • HP Mini 110-1116NR: driver HP Mini 110-1116NR PC loading error

    This computer is unable to boot, so I try to reinstall Windows 7 using a USB key. I am able to start the installation process of Windows 7, but come to a driver error. The said pilot error "a required CD/DVD drive device is missing / if you have a driver for the floppy disk, CD, DVD or USB flash drive, please insert now." I looked online, and that you do not find the drivers. Help, please. Thank you!

    (Also, as a side note the button on the back of the computer centre has rubbed off is there a way to request a new key or way to retrieve the key after I reinstall windows 7?)


    Normally I refer you to check through this one page, on how to perform a recovery system; It includes instructions for many cases, especially when the system will not boot normally. As long as the recovery partition is intact, it should provide a method to enter the Recovery Manager.

    Currently, I'm writing this, so it seems that support pages do not come to the top, the links I posted before don't work right now. It's probably only going to be for a part of today, so if see you them later they work.

    However, an alternative that you can try is a system repair disc. IF you have access to another computer running Windows 7, you can use one, or you can visit this page:

    Create a Windows 7 system repair disc -

    There are instructions on how to make a repair disk, and you can also find iso files, you can try.

    I hope this helps.

  • Password BIOS HP Mini 110 problem

    I have a HP Mini 110 1020nr and forget the password, please help

    Error: CNU92462YQ

    Thank you


    Try to enter: e9lo7vg7i5 (3rd character is a lowercase L)

    Kind regards

    DP - K

  • HP Mini 110 - no sound after replacing hard drive and install XP

    Mini 110 my wife died recently and I had to replace the hard drive.  I got everything up and working well except for the audio.  The driver on the HP website for the 110 will not install as it is said that there is no device installed for this driver.  In the list of hardware, there is a PCI Device with a question mark, and I can't seem to find a driver.  Even after the installation of the driver chipset and bios flashing, there is not audio device work.

    There, can anyone help?  I would really appreciate it!

    Try to install the audio driver from here and check...

  • Need the latest version of the driver for Broadcom 802. 11b / g WLAN to upgrade XP to Windows 7 on my Compaq Mini 110

    Windows 7 Advisor says to download the latest driver for Broadcom 802. 11b / g WLAN before I can move from Winows XP.  My laptop is a Compaq Mini 110 c - 1100CA computer.

    Please get the latest version of the driver.


    It's the latest XP driver for the broadcom adapter. & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_101092_1%257CswEnvOID%253D1093%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  • Attack of Zaq 140813 need driver for keyboard numbers, HP Mini 110-3530NR, Windows 7,

    Attack of Zaq 140813 need driver for keyboard numbers, HP Mini 110-3530NR, Windows 7

    Dear Brigitte,
    Yesterday, I tried to connect my keyboard to my mini HP numbers, but it did not work.  I am sure that the problem is the driver, as I was able to connect to my HP laptop with Vista, without any problem.

    The keyboard is a keyboard of ten Note X TK01 USBM.  In the back are the words "Arvel TK01 = USBM Ten keyboard, S? N 990500424, made in China.

    You can locate a driver for me so I can install it on my HP Mini?
    Thank you

    Dear Brigitte, it was one of those anomalies that solve themselves.  After trying several times, I found the pad of numbers worked so I replugged it it after that I received the error message.  Second time around, it works fine.  JC

  • HP Mini 110-1190eo: mini 110-1190eo internet driver 32-bit hp


    Thanks in advance to anyone who can help me here

    I have a HP Mini 110-1190eo which has been formatted before having THAT installed XP windows. I have re-installed the drivers and everything works except the internet!

    HP Wireless assistant works, but I cannot activate Wireless LAN. I tried to plug in a cable of LABORATORY, but who have no internet or...

    I downloaded and installed all the drivers of network from this site without luck:

    Here is a picture of the Device Manager where you can see other material that does not work...

    I'm not very good with computers, but I hope someone can tell me how to get the internet going? Maybe by finding the exactly what material there and what exact driver should work (if this is the solution)?

    Really need this for a uni assignment...

    Thanks again!


    Here is the driver for the HP bluetooth module...

    This package contains the software needed to support the integrated Module HP with in models of portable Bluetooth wireless technology support and operating systems. The integrated Module HP offers Bluetooth wireless technology wireless connectivity to other devices from the built-in module to laptops taken in charge.

    File name: sp43730.exe

    For ethernet and network controllers, please follow the following steps, so I can understand what that drivers they need...

    Here's how you can find the hardware Id for the network controller and you do the same thing for the ethernet controller.

    Go to Device Manager and click on the network controller needing drivers.   Then click on the Details tab at the top of the control of the network window.

    After the first string you see starts with PCI\VEN.

  • WLAN Driver XP problem on HP Mini 110 3504TU

    Hi all

    I have a problem with WLAN driver Windows XP for this Netbook HP Mini 110 3504TU

    "Network controller"?

    Hardware ID:

    PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C & REV_01

    PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C
    PCI\VEN_14E4 & DEV_4727 & CC_028000
    PCI\VEN_14E4 & DEV_4727 & CC_0280

    Product number: XV876PA #UUF

    SN: {information}

    My Google search results: WiFi chipset is Broadcom. I tried ALL my links (link to the official driver HP) google search result, but just not getting anything,

    I tried anyway install all drivers (search for my googling) downloaded files

    the way normal installation sequence and manual, via the "Update driver" Menu on Device Manager

    but no anymatches found.

    Thanks in advance before...

    Kind regards

    Dave. N

    Hi, Dave:

    This driver should work.

  • Driver LAN (ethernet controller) HP Mini 110-3014TU

    I need driver LAN (Ethernet Controller) for HP Mini 110-3014TU. Please tell me, how do I get the driver? or give a compatible driver for this.

    Best regards.


    Choose the download appropriate for the ethernet driver in the list below.

    Windows 7 32 bit

    Windows XP

    Kind regards

    DP - K

  • HP Mini 110-3131DX. Replacement hard drive; do I need a new and where I get it?

    I dropped my computer HP Mini 110-3131DX directly on his spine and since it turns on to display the boot and these error messages:


    Run the system diagnostics hard drive test.

    Hard drive 1 (3F1)

    F2 System Diagnostics

    Then, it takes time LONGGGG similarly get to the right screen to test (I have to restart the computer to renavigate to the screen) and it says HDD test failed. What should I do now? What should I put in a new hard drive? Where can I get my new hard drive specific? I really need help.

    The longer the better, if your going for hard disk, I recommend 7200.

Maybe you are looking for