Mini 210-1014ea: Wifi does not not on HP MINI 210-1014ea
So I've upgraded to windows 8 last year, it was quick but then day after day, it became slow. This laptop has 2 GB of ram and a 64-bit, Intel atom N450 processor. Given that windows 8 has been slow, I have dedcided to install windows 7. So after that I installed, all drivers worked very well EXCEPT FOR MY CONNECTION WIFI. After more than a week of fighting, I tried to update my drivers and do a lot of things. But my wifi it says "no connection available. Ethernet only works. Well, I installed the latest updates in Windows update. Right now I have the latest Broadcom 802. 11 b / g network driver. Version 5.100.xxxx. I tried to uninstall the driver from Device Manager, but even then I can't search for networks wifi, infact it doesn't show all the wifi networks.
Hello and thanks for the display on the HP support forums. A question when you did your installation of Windows 7, so that installing your drivers that you start first of all with the Chipset Driver.
The reason for this, it's a bit like a traffic COP for all the other drivers on the system. I've seen this cause of conflict with common devices and even up to the point where they are not even appear in the Device Manager.
If you can make sure that you back up all data.
Once this is done go to the systems support page and download all the software and drivers and save it on a USB key.
Once it's done Windows Safe Mode startup.
Once you're in safe mode, that you want to remove all your drivers. You may need to uninstall one at a time and restart between uninstalls. Don't forget to start mode without fail every time.
When all the drivers have been removed. Start Windows again normally. Here, you will need to install the drivers one at a time. Be sure to start with the Chipset Driver first.
Please let me know how it goes for you.
Thak you again for the display and have a great day.
A year and half ago we bought a new Mac and the Time Capsule (TC) to go with it. I tried to set up at the start and think about this topic, I do not think that it has never worked properly. I say this because we got a new modem without router because time Capsule has an inside, and we are unable to connect to wifi. I have a TB Ethernet connection and if I can get online in this way, but the WiFi does not work. Last night, I went through and set up and the WiFi worked, but today it no longer works and I can't seem to do it again.
The indication of WiFi signal says I'm connected, on my Mac and on our phones, but when you disconnect from data it no longer works. It's very frustrating because I don't want to have to go back to a modem/router of the rental of our cable company.
We have just upgraded to OS X El Capitan 10.11.6
I'm pretty confident that the problem is with time capsule, the wifi works with the other router.
When it worked last night I created everything from scratch. But I do not think that I would have to do every time I need to use the internet. I also tried to create a WiFi with a custom DNS but that doesn't work anymore.
Any help would be appreciated.
I am so embarrassed but understand that I would update in the case where everyone does the same thing.
When I put in 1.5 years ago I went from ethernet cables. The Ethernet cable from the modem was connected to the LAN port and the Ethernet cable from the Mac was connected to the WAN. Once I put the cable from the modem to the WAN everything has worked.
Sometimes, just come back to square one.
My wifi does not work on Satellite C55 - A - 14 G 8 64-bit Windows.
How can I fix?
There is wifi on other computers, but not on this laptop.
You always win 8?
Microsoft has already published the Win 8.1 System.
It of recommended to update 8 Win Win 8.1 because different bugs have been fixed and new features have been added.
The 8.1 update win is free and you can download the Microsoft Store update files.
Please perform updates, such as recommended by Toshiba and essential update, the driver and tools.
I guess that after updating the WLan would work properly.
Hoping someone can help, on my Satellite L650 WIFI does not work.
No Wifi or Bluetooth functionality. The light is not on and the function key is not brining to the top of all the options.
Any ideas on how to solve this problem?
Do you use the laptop with the factory settings?
When you use the FN button you find cards flash at the top of the screen?
Try please restart flash cards. Start > all programs > Toshiba > utilities.
Please post comments.
I have a problem. I recently bought Toshiba Portege M800-10Z and downgraded Windovs Vista to XP service pack 3. All right, but the WiFi does not work.
I tried to upgrade the wireless Lan driver, but it still does not work...
I have Intel Wireles WiFi Link 5100 and system is Windovs XP service pack 3
Is there someone who could help me with this issue?
I would be very grateful for advice.
Thank you very much
That you say with the WiFi does not work?
Can you connect to the router?
The WLAN card is recognized in Device Manager?
To solve this problem make sure that you have the latest version of the BIOS. Check on the Toshiba site.
Also disable features of security as a hidden SSID, MAC address filtering and so far away.
Check if an update of the firmware on your router available.
Afteer upgrade to Win 8, the WiFi of my Satellite L670-128 has stopped working properly.
The connection only works some time, usually only a few seconds before the connection is lost.
After a few seconds or minutes the connection is restored, just soon to be lost again.
Cannot download large files or even to see larger photos on normal web pages. Is there any Win8 driver for Broadcom coming 802.11n network card, or should I throw one 2.5 year old computer in the trash?
Buy a usb-wlan card is not an option, as wireless mice is already "permanently" reserving one of the three usb ports and wlan card it would be just to the left...
To my knowledge this L670 series isn t Win 8 taken in charge and this means that there is no special Win 8 drivers for this device, so I put t think you will find an another Win 8 driver for this WLan card.
But do you really want to throw this laptop in the trash just because the wifi does not work properly running Win 8?
The device was working properly under Win 7?
I would recommend running a few Wlan test.
For example; Disable wireless encryption on your router and Wifi connectivity with the open network do that just for testing purposes, perhaps you will need to change the type of encryption to test.
I spent from Vista to XP and now my wifi does not work. I was told that I don't have the drivers.
Can someone help me? I have a Satellite L300D-01N. Please help me, I don't know much about this kind of stuff.
You can download drivers Toshiba from here: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
There is however no driver XP for the L300D. But I found a LAN driver for XP wireless that would work.
Satellite Pro L series
Satellite Pro L300
Download and install
-Wireless Lan Driver Realtek Semiconductor Corporation Windows XP 6.1116.1226.2007
If this does not work, you can have an Atheros Wireless LAN card. If this is the case, look at the other models for an Atheros Wireless LAN Driver XP.
On my laptop, the wireless light is orange and won t work...
When I got the laptop connected to the Ethernet cable, it works fine but the minute that I remove it, it turns off.
Anyone know my problem?
I guess that LAN connection works properly and you can access the internet using LAN.
But the WiFi does not work even if the WLan light is on. Is this good?
I m wondering if you have activated the WLan with the FN + F8 keys.
Have you tried that?
You have configured the WiFi network properly? I mean that you must make sure that you have chosen the good encryption (WEP, WPA, WPA2, etc.) and the right encryption password!
You can also disable all the security settings on your router and was able to connect the notebook to open WLan but it must be done only for testing purposes.
I get a new Win7 64 bit and the FN and the wifi does not work after that.
I need help please.
Sorry, but we can't look for a solution on this path.
Please be kind and offer some basic information which can be very useful for people who want to help.
Use you own the OS version or the original version you got with your laptop?
Is the network card wireless installed correctly (status in Device Manager)?
Toshiba VAP is installed on your machine?
You can use flash cards and FN + F8 option to activate the wireless card properly?
My TECRA stopped with the BSoD (on another thread) and I had to leave my old Satellite M105 - S1021 and try and get it going again.
WiFi does not work on this laptop, even with the switch at the front, running and when I put in a USB WiFI module with an external antenna I get a very bad signal from my router wireless in the next room< 20="" feet="">
I found the specification for this old Satellite M105 series data sheet:
[Satellite M105-S1021 | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1372978& rpn = PSMA2U & modelFilter = M105-S1021 & SelCategorie = 2756709 & selFamily = 1073768663]
Looks like the laptop was equipped with a map of Atheros 802.11 wireless network b/g.
If your internal wireless network card does not, even if you have enabled the external WLan switch, then I recommend check device manager first check that the area of Wlan Card network adapters usually map Atheros Wlan must be there if its not listed, install the Atheros Wlan driver
In addition, next to the switch hardware Wlan, you need to activate the WLan using Fn + F8
Regarding the USB dongle and a weak signal of Wlan:
Well, maybe the USB dongle aerial signal is too low on the other hand you should test connectivity using 802.11 B or 802.11 G standard only
I bought a Satellite P500-1CK with Windows 7 64 bit. Cause I don't need, I replaced it with Windows 7 32 bit and now my WIFI does not work.
I tried many drivers, Toshiba drivers and Realtek drivers, old and new versions. Installed and uninstalled them again and again. But it does not work. In the Device Manager, there is no error and no question mark. The map will be displayed as a RTL 8191SE, it's true. I've identified the vendor & device ID also.
The other FN keys works like a charm, but FN + F8 does not appear. The wireless switch is active and the led is orange.
When I type "cmd" then "ipconfig/all" it will be only shown the PCI Atheros Gigabit Adapter with the IP address, but not the adapter WLAN of Realtek.
Searched Google @ and spend hours and hours, but I am at my wits end... Please help me.
And this doesn t work exactly?
You see a WLAN in range?
Have you looked for WLAN networks?
Can you connect to WIFI networks?
A point would be interesting: can you try the same thing with preinstalled Windows 7 64 bits instead of your own 32-bit installation?
Therefore, use the recovery disk Toshiba to restore the version of the OS preinstalled. You will have a pre-tested Toshiba Windows 7 installation where everything should work properly.
Check this box!
I hope you can help! After the complete collapse of the old WinXp I installed Win7 - mostly away from the ti works. However, WIFI does not work. (P/N is PY869PA #ABG, he also says dv1303ap on the label)
Is there a driver for the available WLAN? Witout WLAn or internet access good old HP is pretty useless...
Here's what you need to do to get this old Intel Pro 2200 card to work with W7...
Download the zip version of the driver from the link below. The first file listed.
Unzip it into a folder.
Go to Device Manager and click on the network controller needing drivers.
Click the driver tab. Click on set to update driver.
Select her browse my computer for driver software method and navigate to the driver folder, that you unzipped.
Make sure that the include subfolders is selected and the driver should install.
I got this noteboof from a friend and he had a partition called (D) RECOVERY of 22GB. I accidentally formatted and now my wifi does not work. I updated my drivers and tried many things but its still does not. What can I do?
This is the latest driver for the wireless card W8.1 you need for this card.
188.8.131.52 Rev.B (November 4, 2014)
If it doesn't, unfortunately, I will not be able to help you with this issue.
It is possible that if the ralink driver wasn't the first that you have installed, then you can have polluted the work.
I suggest you do a right click on the ralink wireless adapter, select uninstall, select uninstall driver, restart and reinstal the driver that I posted.
I upgraded Qualcom Ateros and now my wifi does not work. How is it?
I've just updated and now my wifi does not work. I trust Microsoft updates... But this time I shouldn't trust...
1. what operating system is installed on the computer?
2. How is that you have updated drivers for QUALCOMM Ateros?
3. what exactly happens when the problem occurs? You receive an error message?
If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. Check out the following link.
Restore a driver with its previous version
Also check out the following link:
Windows wireless and wired network connection problems
Let us know if it helps!
I have Windows installed pro 8.1. I was using wifi on this laptop, it worked fine. However, recently, I see that the Wifi does not work although he shows me the SSID of my network I used to use and also the SSID of the networks of neighbors. (It means that the wifi on laptop chip is capable of scanning the wifi signals and so it works). The same router from which all other Mobile tablets, my home laptop work are able to connect to the wifi network. Only on this laptop I am facing this problem. What may be a solution or what I should try. I tried the steps listed here http://www.fixedbyvonnie.com/2013/10/how-to-fix-limited-or-no-connectivity-wi-fi-issues-in-windows-8...
Although I have not changed the default settings only steps above on blog, I tried to solve the problem. However, it did not work. Also keys function + F12 on laptop has no effect. The light on the F12 key is always on. However, it is possible to toggle the wifi in the bar of Windows 8.1 charms.
What should I check?
I bought an external USB wifi device that solved the problem. The card wifi on laptop works well, but for some unknown reason, he is not able to connect to home wifi router. http://www.snapdeal.com/product/leoxsys-150-Mbps-Nano-WiFi/1179610?utm_source=earth_feed&utm_campaign=TopPerformersPLAScaling3000&utm_medium=CPC&utm_content=1179610&utm_term=, & campaignid = 350311165 & 28373951005 = adgroupid & adposition = 1o1 & network = g & device = c & targetid = pla-55251503741
I just bought hp-15ac040tu... .but the wifi does not work on it please help
sp72879.exe (WiFIi) and
Other drivers may still be missing, please provide the "Hardware ID" windows for all still missing and/or unknown devices.
If you have any other questions, feel free to ask.
Please click the 'Thumbs Up' white LAURELS to show your appreciation
Maybe you are looking for
Transfer from Windows to Mac. Need advice on the brand and model of HD Ext for compatibility which will not need reformatting? Advice welcome.
I am running Internet Explorer 8 and Firefox 3.6.6 and reflected on the following website www.finningley.org and on the home page, there is a picture of a plane that appears in the right place on Internet Explorer but it is on the text in Firefox. I
My computer tell me that Vista ServicePack did not install. Then he said: "changes back, do not turn off your computer." Then he stops himself and starts the loop over and over again. How in the lower _ this crazy tautology? I can't off the "revertin
Hello! In Windows Vista and later versions, you can assign a static IPv6 address and the gateway to the interface via a GUI or alternatively with netsh. Address can be configured statically on Windows XP with netsh interface ipv6 add address "Local A
Hello I just bought a refurbished certified router. The model is WRT610N-RM. Where is what I did: 1 downloaded new firmware on the site using old router, and then disconnected. Connected a lan cable to the new router. The router power. Held down rese