Mini DisplayPort did not end-2009 iMac

Similar Questions

• Mini Displayport does not not on the new Best Buy Yoga 14 (Yoga 460)

  Yesterday, I bought one of the brand new 14 Yoga from Best Buy, the one with the stylus, which is basically a 460 yoga.

  Mini Displayport does not work. Hook up a monitor makes the system to hang for about 15 seconds, and no screen is detected.

  All Windows and Lenovo software are up to date.

  I use a Mini DP--> HDMI adapter, but I've never had problems with it on other computers.

  I have ordered another cable converter and will try that tomorrow.

  Lenovo is aware of this problem? Is there a solution?

  
  

• I finally got the money to buy the $499, of the MGEM2LL/A core i5 1.4 Ghz mac mini, but did not have the extra $100 for the 8 GB of RAM, I do the upgrade later?

  New mac mini MGEM2LL/A, memory upgrade

  Sorry, the new Mac mini has no user-expandable memory and the amount of memory you choose when you buy the computer is the amount you have for the life of the machine.

  I hope that solves your problem.

  Best regards

  Austin

• Activation of Mini DisplayPort after transplanting HDD internal?

  Just transplanted a SSD internal in a 2008 Mac Pro (who had two DVI input) in a most powerful 2009 Mac Pro (which has a DVI input and two mini Displayport inputs). Trying to connect two monitors, as well as the DVI input is fine but entered Minies Displayport do not seem to be working anymore, and I guess that this is related to the hard drive, as the mini Displayports were fine before the operation. Any advice on how to get these to work require a clean wipe and install Mac OS X?

  Thank you!

  What version of the OS is on the transplanted SSD?

• 2009 iMac 21.5 does not illuminate

  My 2009 iMac monitor is black and does not illuminate.  It has been connected to different computers, macbook pro and a mac mini with the same result. Is there something that can be done or is it just toast?

  Try to zap the PRAM or reset the SMC.

  Board: https://discussions.Apple.com/docs/doc-3603iMac SMC and the PRAM reset   

  Otherwise, take the model to your local store from Apple or a DAD.

  

• using the iMac 27 inch mid 2011 as an external monitor with a PC via mini DisplayPort

  I find conflicting information via web search to be able to use my iMac 27 inches, mid-2011 as an external monitor with a PC. Is it possible to use the iMac as an external display via the Display Mode target between Thunderbolt port of the iMac with a PC equipped with a mini DisplayPort?

  Of course, I hear it's possible with the appropriate cable. But if it is not possible, I would like to know for sure.

  Thanks in advance for your help with this. _henry

  Target display mode is Mac to Mac only. Use your iMac as a display with the target - Apple Support Display Mode

• Replace hard drive SSD on end 2009 27 "iMac

  end 2009 27 "imac

  OS X 10.11.3

  3.06 GHz intel Core 2 Duo

  4 GB memory

  According to the genius bar, the Seagate 1 TB hard drive on my end 2009 27 "iMac is a failure.  They told me that they do not have the parts to replace and suggest I do myself or take it to Best Buy.  Best Buy said that they are unable to do so I can't to try it myself.  I read and watched directions to ifixit and several other sites.  I am convinced that I have the skills to do the replacement, but I'm less confident about the purchase of equipment:

  (1) Ifixit say I should use a Seagate drive to replace the Seagate drive I have.  Engineering made no mention of this.

  (2) engineering suggested I buy a Crucial BX200 480 GB SATA 6 GB/s 7 mm (with 9.5 mm adapter) 2.5 "disk flash internal SSD (part #CT7414188).  The essential site says I need part CTSSDCONVT a 2.5 "to 3.5" SATA SSD/HHD converter for 2006-2012 MacPro.  They suggest that it will work in my iMac as well.  Articles and discussions have referenced problems with noise from the fan and order and mention with fixes software and manual control of the speed of the fans.  When I mentioned questions fan of genius, he said not to worry about this, and the Crucial site makes no mention of him either.  The SSD costs $129,99 and converter $ 21,50 for a total of $151,49.

  (3) OWC offers aDIY Bundle which includes a 480 Electra of mercury GB 3 G SSD, newer technology AdaptaDrive to allow installation of the 2.5 "SSD and a digital probe online that eliminates the noise of the fan and maintains control of the correct system fan through management for the iMac system controller.  The package costs $199,75.

  Bundle OWC seems like a good deal but it seems to me that SSD Crucial works to 6 GB/s and the Electra of mercury to 3 Gbps.  If I go through the replacement, it seems more sensible to get the 6 GB/s.

  I wonder if I can mix and match and use the Crucial SSD with the Adaptadrive of more recent technology and digital sensor OWC.

  Any suggestions from anyone who has done this replacement would be appreciated.

  2009 iMacs have SATA 2 - meant 3Gbps rate.  It does not matter if you use 2 SATA and SATA 3 - you get only speed SATA 2.

  Second - the adapter for 2.5 to 3 5 - don't hang a lot of money on this,-l'ebay has many choices.

  My personal experience, support 'intel' works best - since it is the length, so the seat fits much better.

  Yes, you can mix and match - choose what might suit you best.

  For me, I had Apple OEM SSD (Samsung doing this - 256 GB, SATA 3) with intel on iMac 2011 (SATA 3 speed), with support from OWC thermal line sensor.

  Samsung 830 (256 GB and SATA 3) on iMac 2010 (SATA 2 speed), with support from Intel, with OWC thermal line sensor.

  Note: the probe heat 2010 and 2011 are different.

  Good luck.

  Sam

• Problems with the Display Mode target on end 2009 27 "iMac

  Used late 2009 iMac 27 "in the view target in conjunction with a Dell XPS tower with i7 processor, Windows 7 and the best graphics card I could afford at the time connected by HDMI to mini display port cable.  Worked well for years.  Set aside Dell for a few months and the update of the iMac to El Capitan OS 10.11.3.  Recently tried old setup with same Dell PC and was able to move from Mac to PC, but the PC screen resolution was at the lowest setting. I got an error message when enabling/disabling to PC who said there was a problem with the port causing mini display of the system back to the lowest resolution. Impossible to reset at a higher resolution.

  I tested the Dell PC on another monitor, and it works very well at higher resolution (2560 X 1440). Now, when I reconnected it to the iMac (which works fine), the screen becomes black.

  Is it possible that the operating system upgraded (El Capitan) is not compatible with the targets using mini display port Display Mode?  Any ideas?

  Use your iMac as a display with the target - Apple Support Display Mode , also consider having a bad cable or connection. Does not hurt to try different cables, they can and will the bad!

• Another that holding down the power button, then by restarting, how should I manage my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Another holding down the power button, then by restarting, how should I handle turn on my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Combinations of keys start for Mac - Apple Support

• I have an iMac Pro and a black box is on my desk - it gives information on what's on my computer - I want to get rid if it but did not now how

  I have an iMac Pro and a black box is on my desk - it gives information on what's on my computer - I want to get rid if it but did not now how

  Turn off VoiceOver in the universal access pane or the accessibility of the system preferences.

  (142944)

• How heavy is an iMac 21 1/2 inch end 2009?

  How much is an iMac 21 1/2 inch end 2009 weigh with or without the support? I remember well the stand came as a sheet that I just stuck in the slot at the back of the unit. Can I have just lift it up to remove it? Is it possible to install a VESA mount in its place?

  20.5 lb/9.3 kg (approximately)

• I have a late 2009 iMac. When I tried to upgrade to El Capitan. He said that the CHIP shows the h/d is a failure and can not be updated. I have install an external withEl of h/d Cap but it is very slow. the h/d is USB 3 but the iMac's USB 2. the h/d is on

  I have a late 2009 iMac. When I tried to upgrade to El Capitan. He said that the CHIP shows the h/d is a failure and can not be updated. I have install an external withEl of h/d Cap but it is very slow. the h/d is USB 3 but the iMac's USB 2. the h/d is only 5400 RPM. a 7200 RPM 7 / would accelerate the iMac?

  No, because the limiting factor is the computer is USB 2.0, which is how it connects any external drive apart the external drive. As USB 2.0 is much slower, there is no real advantage to a 7200 RPM drive. What you need is a Firewire enclosure that supports FW800 which is much faster than USB 2.0.

• I have an iMac 27 inch mid-2010 and a game I play is to say that I did not have a sufficient graphics card.

  I have an iMac 27 inch mid-2010 and a game I play is to say that I did not have a sufficient graphics card. Is there a way to improve or update my graphics card? I currently have an ATI Radeon HD 5670 512 MB. Any help would be appreciated! I'm also running on OS X El Capitan.

  You can't pass the GPU. Make sure you check the game system requirements to make sure that they will work on your model.

• ORA-20001: you cannot cancel termination that they did not yet end

  Hi all

  I'm trying to rehire an employee who stopped. This is the API that I use:

  declare

  date of ld_hr_termination_date: =' 31-DEC-4712;

  Start

  APPS.hr_ex_employee_api.reverse_terminate_employee

  (p_validate = > false - Boolean false by default)

  p_person_id = > 1059 - number

  , p_actual_termination_date = > ld_hr_termination_date - ld_actual_termination_date - in date

  , p_clear_details = > "n" - in varchar2

  );

  exception

  while others then

  dbms_output.put_line (' error: ' |) SQLERRM);

  end;

  
  

  Error: ORA-20001: you cannot cancel termination that they did not yet end
  

  I checked in hr.per_all_people_f and the employee is laid off.

  I checked in human resources. PER_PERIODS_OF_SERVICE and the ACTUAL_TERMINATION_DATE corresponding to its expiry date in hr.per_all_people_f.

  I checked in hr.per_all_assignments_f and has an effective end date that corresponds.

  Can you please tell me where I could look at to fix this error.

  Thank you

  Harsha.

  Hello

  You will need to move the effective date of the employee for the p_actual_termination_date parameter and not 31-Dec-4712.

  Thank you

  Mudassir

• I signed up for 30 day trial and I just got a notification if the trial ended. I did not use the system for more than 30 minutes.

  I signed up for a 30 day trial and I just got a notification if the trial ended. I did not use the system for more than 30 minutes.

  http://helpx.Adobe.com/x-productkb/global/trial-software-expired-early.html