Mini Mac restarts during startup until

Similar Questions

• U2515H, black screen with error during startup until the Windows login screen

  It is a half frustrating work situation.

  Was doing this:

  display port HDMI card--> cable HDMI - HDMI--> HDMI U2515H port

  This configuration has worked in Windows 7, with a 2560 x 1440 resolution reached.

  However, when you perform a reboot of the machine, the screen went black and impossible to display the BIOS POST screen (these text showing the amount of RAM you have, what are the HD detected, etc.). In addition, there was an error message on screen, saying:

  "The current moment of entry is not supported by the display. Please change your timing of entry to 2560 x 1440, 60 Hz or any other listed monitor calendar according to the characteristics of the monitor"

  The message error and white screen persists until Windows loaded to the login screen. This means that I can't see even the Windows logo, or the safe mode selection screen if I press F8.

  It's so no way for me to go into the BIOS to change any parameter, or do a boot was secure.

  Tried to use a DVI-HDMI converter and also a DVI-HDMI cable to make use of the DVI port of my video card. Still the same error as above. Worse still, this implementation does not work in Windows 7, gives me a white screen.

  I'm sure the DVI port on my video card works, cos it can work with my old Samsung monitor. Inspired by the present, the steps to be followed to the letter, may force the U2515H to show the BIOS screen:

  1. stop down and power down the computer.

  2 port DVI video card-->--> old Samsung monitor DVI port DVI - DVI cable

  3. turn on your computer. The screen of the MESSAGE on the Samsung monitor.

  4. go into the BIOS by pressing del screen

  5 disconnect the cable DVI - DVI video card DVI port.

  6 port card video--> cable DVI DVI - HDMI--> HDMI U2515H port

  The thing is, if I have to keep the old monitor, why bother to buy the new U2515H from Dell?

  So, how can I get the U2515H to accept the signal from my video card during the POST screen and the start-up phase, without going through the tedious steps each time? Thanks in advance!

  Material:

  motherboard: Asus P5K - E Wifi (latest version of the BIOS)

  video card: Galaxy 8800GT (DVI, HDMI)

  It seems that your motherboard ASUS has a slot PCIe x 16 blue. If one of the beaches mid PCIe x 16 graphics cards will suffice. Go here. I have this sort by Nvidia PCIe x 16 2.0 video cards, low to high price. You look for one with DP or CDM. Or simply go to a local store and search the PCIe x 16 video cards with DP or CDM.

• The computer hangs during startup until after latest upgrade of Windows 7

  My new Dell has a little less than 3 months and so far has worked like a dream. It runs Windows 7. The latest Windows updates, which there were 3 were installed as I stopped last night. When I booted the pc this morning he hooked up with the following message: "Operation Applying 51 51 (\Registry\Machine\Components\...) update".

  The pc reacts more than anything, so finally, I manually turned off and restarted. The system returns to a previous Restore Point. Later in the day, I turned off the pc how he downloaded 3 updates (probably the same ones again) and the same problem occurred when restarting later. The pc is running McAfee SecurityCenter, which has been pre-installed again.

  Please can anyone help with advice for this problem?  Thank you.

  Peter

  Consider yourself lucky.

  Because this update was 'critical', he went ahead and downloaded itself last night while I was asleep.

  I woke up this morning to a glorious flashing cursor whenever I try to start.  My computer still runs beautifully, now it does not even start.

  Thank God for this update, otherwise I might be able to get for the photoshops I was working on that.

  Before restoring personal windows comes to talk here about starting of system restore and all the other _ with windows that never worked for me once, I already tried it.

• Windows Media Center stops and restarts during startup of a film in Netfilx work, how to fix?

  Windows Vista Home Premium Media Center 11 never had problem playing Netflix movies, up to now, which I think is security / other updates.

  Hello

  You get no matter what error code or error message?

  I would suggest to run the file system (CFS), parse and check Checker tool if it helps.

  How to use the tool File Checker system to troubleshoot missing or corrupted on Windows Vista system files: http://support.microsoft.com/kb/929833

  For more information, see the following Microsoft article.

  Known issues and limitations of Netflix on Windows Media Center for Windows Vista:

  http://support.Microsoft.com/kb/972496

  Hope the information is useful.

• What is this screen during startup?

  I bought a Mac Pro to anyone. He had top Cougar. I had these problems and then upgraded to El Capitan and still have them. The back USB ports 'freeze' sometimes. This means that the mouse is connected and you can see that light is thus then it becomes 'power' but won't move the mouse and the keyboard type. So, I have to restart hard. Also when wifi is on and I turn it off the computer freezes as well. And once again I have to hard reboot. During startup, I sometimes get this screen. The loading bar stops at halfway. I posted a picture of OSX 10.11.2; 2 x 3 GHz Quad Core Intel Xeon; 16 GB 800 MHz DDR2 FB - DIMM thanks for any help!

  A check of the machine as you experienced is usually due to a hardware problem.

  Using Apple Hardware Test - Apple Support

  If you don't have the original disc, then you can download it here and make a bootable CD

  https://github.com/upekkha/AppleHardwareTest http://support.Apple.com/kb/ht1427

• MBPro stops during startup.  If I continually move the mouse during startup, it will go on my desk.  If I launch Firefox and try to do anything, it stops.  This can be corrected?

  Mac Book Pro stops unexpectedly during startup.  I can get it to go to my office, if I continually move the mouse during the boot, but after I launched Firefox and try to do anything, it will stop.  If I try to run the scans of security or reinstall OS X using the command + R and disk utilities, it stops.  Sometimes it gives me a box saying something about stopping with various options such as Cancel, stop, reboot, etc., but it makes no difference that I click on, she stops.  Sometimes, I get no warning at all.  This can be corrected?  I'm not savvy Mac.

  Reset the SMC could solve problem then.

  Reset the management system (SCM) controller on your Mac - Apple Support

  Also try the safe mode boot.

  Try safe mode if your Mac does not end commissioning - Apple Support

• iMac 5 k - restart during work - sometimes with Kernel Panic

  Hello

  my computer restarts during my work 1 or 2 times a day. Sometimes I get a kernel panic Message.

  Here's my report from panic. Maybe someone can read it. :-)

  iMac 5K (end of 2015), OS X El Capitan 10.11.6, with all updates, no device on the USB Ports, software: Adobe CC, Suitecase, uptodate all.

  Thu Jul 21 09:14:21 2016

  Panic report *.

  panic (cpu 1 0xffffff80127b3bf2 appellant): "pointers element of invalid queue for 0xffffff803bb1a220: 0 0"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3248.60.10/osfmk/kern/queue.h prev: 241.

  Backtrace (CPU 1), frame: return address

  0xffffff92e227b980: 0xffffff80126dab52

  0xffffff92e227ba00: 0xffffff80127b3bf2

  0xffffff92e227bb80: 0xffffff801274ae14

  0xffffff92e227bd00: 0xffffff801274e94b

  0xffffff92e227bf20: 0xffffff80127cecef

  0xffffff92e227bfb0: 0xffffff80127ec475

  The process corresponding to the current thread BSD name: QuickLookUIHelpe

  Mac OS version:

  15G 31

  Kernel version:

  15.6.0 Darwin kernel version: Thu Jun 23 18:25:34 PDT 2016; root:XNU-3248.60.10~1/RELEASE_X86_64

  Kernel UUID: B5AA8E3E-65B6-3D0E-867B-8DCCF81E536C

  Slide kernel: 0 x 0000000012400000

  Text of core base: 0xffffff8012600000

  Text __HIB base: 0xffffff8012500000

  Name of system model: iMac17, 1 (Mac-65CE76090165799A)

  Availability of the system in nanoseconds: 2177394476284

  last load kext to 122437533229: com.apple.filesystems.smbfs 3.0.1 (0xffffff7f9324d000, size 413696 addr)

  Finally unloaded kext to 166562274377: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7f94786000 size 40960)

  kexts responsible:

  com Apple.filesystems.smbfs 3.0.1

  com Apple.filesystems.afpfs 11.0

  com Apple.NKE.asp - tcp 8.0.0

  com.apple.driver.AppleTopCaseHIDEventDriver 86

  com.apple.driver.AppleHSBluetoothDriver 86

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.ApplePlatformEnabler 2.6.0d0

  com.apple.driver.AGPM 110.22.0

  com.apple.driver.X86PlatformShim 1.0.0

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleMikeyDriver 274.12

  com.apple.driver.AppleHDA 274.12

  3.12.7 com.apple.driver.AppleGraphicsDevicePolicy

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.kext.AMDFramebuffer 1.4.2

  com Apple.Driver.pmtelemetry 1

  com.apple.AMDRadeonX4000 1.4.2

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.driver.AppleIntelSKLGraphics 10.1.4

  com.apple.iokit.IOBluetoothSerialManager 4.4.6f1

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.6f1

  com.apple.driver.AppleIntelPCHPMC 1.1

  com.apple.driver.AppleIntelSKLGraphicsFramebuffer 10.1.4

  com.apple.driver.AppleSMCLMU 208

  com.apple.kext.AMD8000Controller 1.4.2

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.iokit.AppleBCM5701Ethernet 10.2.0

  com.apple.driver.AppleSDXC 1.7.0

  com.apple.driver.AirPort.Brcm4360 1040.1.1a6

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.security.SecureRemotePassword 1.0

  com.apple.driver.AppleHIDKeyboard 181

  com.apple.driver.AppleMultitouchDriver 304.12

  com.apple.driver.AppleHIDTransport 5

  com.apple.driver.IOBluetoothHIDDriver 4.4.6f1

  com Apple.kext.Triggers 1.0

  com.apple.driver.DspFuncLib 274.12

  com.apple.kext.OSvKernDSPLib 525

  com.apple.iokit.IOSurface 108.2.3

  com.apple.iokit.IOSerialFamily 11

  com.apple.driver.CoreCaptureResponder 1

  3.12.8 com.apple.driver.AppleGraphicsControl

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.6f1

  com.apple.iokit.IOBluetoothFamily 4.4.6f1

  com.apple.driver.AppleHDAController 274.12

  com.apple.iokit.IOHDAFamily 274.12

  com.apple.iokit.IOAudioFamily 204.4

  com.apple.vecLib.kext 1.2.0

  com.apple.iokit.IOAcceleratorFamily2 205.11

  com.apple.driver.AppleSMBusPCI 1.0.14d1

  com.apple.driver.X86PlatformPlugin 1.0.0

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.kext.AMDSupport 1.4.2

  3.12.8 com.apple.AppleGraphicsDeviceControl

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleThunderboltEDMSink 4.1.1

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  com.Apple.Driver.USB.Networking 5.0.0

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.driver.CoreStorage 517.50.1

  com.apple.driver.AppleThunderboltDPInAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPOutAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  com.apple.driver.AppleThunderboltNHI 4.0.4

  com.apple.iokit.IOThunderboltFamily 6.0.2

  com.apple.iokit.IOEthernetAVBController 1.0.3b3

  com.apple.driver.AppleUSBMergeNub 900.4.1

  com.apple.iokit.IO80211Family 1110.26

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IONetworkingFamily 3.2

  com Apple.Driver.corecapture 1.0.4

  com.apple.iokit.IOAHCIFamily 2.8.1

  com.apple.driver.usb.AppleUSBXHCIPCI 1.0.1

  com.apple.driver.usb.AppleUSBXHCI 1.0.1

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417,4

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  Have you added or replaced memory modules?

• Mini Mac - exchange of hard disks

  I have two mini Mac - the two 2012.

  Mac mini #1 is i7 2.6 GHz Quad Core - my first desktop computer

  Mac mini #2 is i3 2.3 GHz Dual Core - used as HTPC / Media Server

  #1 has (2) 1 TB disks, which I use a lot less than half (I also have external drives)

  #2 a (1) 512 MB internal drive, which is almost complete

  I plan to (1) move the 1 TB drives from #1 to #2 and move all data (mainly from the iTunes music ALAC and some iMovie video), that would solve the question of space. While they are open I consider also adding an SSD as the diskette of starting to #1, this would improve the startup time, run certain programs a little faster and a 256 MB or 512 MB disk would be inexpensive, that I would win a little more than space for data too. (to be honest, the Mac mini is jealous of the SSD in my MacBook)

  I've increased the RAM to #2, replace a switch of volume on a 3 g iPhone and replaced a screen on an iPad 2, so I'm not afraid of detail work - but only the RAM was easy. I also watched the videos on the replacement of a HD for this model on iFixIt. What is not clear is how much more difficult it is to make the first record as the second. If I move just a reader I wouldn't have to dig in the 1st Bay.

  So, my questions:

  (1) how can I say on the report system which drive is in the Bay, by whom I have which is on top, which is at the bottom? Or can I assume that the startup disk is always on top? (harder to do)

  (2) is the player in the upper Bay of much more difficult to replace?

  (3) I would also examine suggestions for a reliable SSD, but this isn't the substance of my question.

  Thanks for your help...

  Here's a video OWC on how to add a second drive to a Mac mini (same steps for 2011) 2012. I bought their data Doubler kit (and the extra ribbon cable) so that I would have the tools to get the job done right. Seen their detailed video while performing the surgery. I bought a 128 GB OCZ Vertex SSD (now a division of Toshiba and new product name VT180 series) for main and kept startup disk the Apple 512 GB of disk in place. The OCZ Vertex is fast and reliable for fall 2011.

• Mini Mac waking from sleep. A SOLUTION.

  I had the same problem that everyone has:

  Mini Mac won't sleep, requiring a shutdown and restart.

  I found the cause of my problem. This solution has been tested.

  Your system may differ from mine, but my solution can give you some ideas to try.

  My system: Mac mini (mid-2011), running Lion.

  On March 19, the eve of the day when the problem started, I sent a print job on my printer.

  The next morning (20 March) the problem started and happened again on 21 March.

  Exact symptoms seen: screen switch mode; However energy saving, the computer never goes sleep (front panel LED rest of suite, throughout the night, did not have his usual pattern of sleep slow breathing).

  In particular, the "system.log" file shows the usual "alarm maintenance" wake up every 2 hours. The newspapers just go quiet.

  Impression triggered the problem:

  My printer is a recent model Brother laser printer.

  Since March 19, I had been using Control-P to print documents;

  However, at no time I turn on the printer; my intention was to accumulate my impressions for several days,

  After that, I planned to turn on the printer and do my print and send all at once, for efficiency.

  It helped me: this solved my problem:

  March 21, I was wondering if something in the print queue prevented from sleeping.

  Experimentally, I opened app leader brother printing and deleted the print job in the queue,

  and BINGO, I instantly found the opportunity to sleep and wake my Mac mini.

  Other tests have shown that the problem is reproducible at will. :^)

  On 22 March, I tested the mini to ensure he sleeps and wakes.

  Then I sent a print job to the print queue, leaving the printer off and tried to sleep the computer.

  The problem comes back immediately: the display fell asleep but the computer does not.

  Then I connected ssh via LAN and issued:

  % lpq

  for the number of working the print job, then

  lprm % [jobnumber]

  to clear the print queue of the printer.

  This delete the print job, and the computer went to sleep immediately.

  Moral: They say devices can prevent sleep.

  Well, it shows that a device can prevent sleep without even be turned on!

  Tip: If you * must * stop your mini, first try to connect to the local network via ssh and issue the

  sudo shutdown - hour now

  for a stop more ordered by limiting the risk of data loss.

  PS. usually I can solve any problem of sleep if I ssh in from a different computer and question

  killall % ScreenSaverEngine

  but this does not work in this case.

  This object could be turned into a 'trick' - If you want to.

  Given that it is useful and not directed towards another user in a response.

  Thanks for sharing!

• Realtek RTL8101 PCI Ethernet is in error during startup

  Hi all
  I have EDT recently bought by Satellite A200-1CN notebook PC series. I'm having a problem at the start of the system that has Windows Vista installed.
  The Realtek RTL8101 PCI Ethernet v 1.02 (060510) gives error during startup. The error is to run is as follows

  PXE - E61 Media Test failed
  MOF: Left PXE ROM

  Can any help with this problem

  Concerning

  Hello

  Hmm you ve you have a problem with the Vista boot! :|

  Usually, this message appears because the BIOS can not find a source of start-up as ODD or HARD drive and then try to boot from LAN.

  Perhaps the BIOS can not find HARD drive due to a hardware problem.

  Hmmm. First of all, you should try to change the boot order in the BIOS. Put the HARD drive as first boot device.
  Save the settings and try to restart the laptop. If it is not possible to start the Windows Vista I guess that HARD drive is dead!

  Have you tried to reinstall Windows Vista using the Toshiba Recovery CD? Check this box!

  If all this procedures don't help I recommend you contact the ASP in your country.
  The technician must check the laptop and if necessary, it should replace the HARD drive.
  Your warranty is valid so that everything should be done for free.

  Good luck

• Vista system stops during startup and asks to press F1 to continue

  I am running Vista32bit Home premium... I was wondering if there was a way to prevent the computer from stop when starting.  My computer stops after the diagnosis of the screen and asks me to press F1 to continue (boots in windows) or delete to enter setup (bios setup menus).  After hitting the F1 computer boots to windows.  He always did until last week when I had my computer repaired (repairs failed).  After the repair, the computer should boot directly into windows all the time which was nice.  But, I had to reinstall Vista and is again present during startup.  I would like to boot directly into windows constantly... there at - it somewhere that this will enable a setting? Thank you! Mike

  You use a floppy disk? If you do not, disable it in the BIOS.

• Black screen during startup

  I have a HP m9520f I bought a month ago. From time to time, it gives me a black screen when booting. The computer is on, but nothing happens. When I unplug the power cord and plug usually once again, it starts fine the next time. I tried solutions suggested by pressing F8 during startup. But nothing is going on (it started normally without any problem).

  The clues and suggestions are appreciated.

  Could be an intermittent hardware failure, try to open the housing, cleaning (using canned air) all, remove and reinstall the RAM and check the connections are secure. However, first, check the screen. Is the cable correctly connected at both ends, and the power cable is safe? You could test if it's not for lack of a monitor, if you have a keyboard with a sleep button, to set market and that, if the screen goes black, wait at least 10 minutes until it would have normally received at the logon screen. Then, press the sleep button and see if she falls asleep. Also watch the disk activity; If there is a lot that the operating system is probably start normally.

• I get the error "on the volume C: default transaction resource manager encountered an error during startup and its metadata has been reset. The data contains the error code. »

  original title: NTFS problem
  Every 5 seconds, I get a warning (event ID 136) that says: "on the volume C: default transaction resource manager encountered an error during startup and its metadata has been reset. The data contains the error code. »

  Immediately followed by an error (event ID 137) that says "on the C: volume default transaction resource manager encountered a one-time error and could not start. The data contains the error code. »

  I am running windows 7 ultimate in any way to solve this problem?
  

  Hello

  This problem occurs if the Windows file system transaction log is damaged. The Windows file system uses the transaction log to retrieve the system transactions when a file error occurs. The system of common log (CLFS) transaction logs may be left in an inconsistent state. When the CLFS transaction logs are in an inconsistent state.
  To resolve this problem, delete the files .blf and .regtrans-ms in the folder % Windir%\System32\SMI\Store\Machine.
  After you restart the computer, the registry regenerates the deleted files. These regenerated files are in a consistent state.
  1. click on Start , type cmd in the Search box, and then click cmd in the list of programs .

  2. click on run as administratorand then click continue.
  If you are prompted for an administrator password or for confirmation, type the password, or click allow.

  3. at a command prompt, type the following command and press ENTER:
  fsutil resource setautoreset true c:\
  Note these steps assume that Windows is installed in the default location, drive C. If this is not the case, adjust the drive letter of the path of the folder to match your configuration.

  4 restart the computer.

  I hope this helps.

• My mac crashes during the installation of the cs6. I have to turn off the mac. Now, I can't reinstall or uninstall cs6. He said the Installer failed to initialize.

  My mac crashes during the installation of the cs6. I have to turn off the mac. Now, I can't reinstall or uninstall cs6. He said the Installer failed to initialize.

  If you have not yet installed any Adobe application, try step below and check.

  Step 1

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '. ( "Don't miss ~ symbol" )

  ~/Library

  It will open the folder of the user's library.

  (3) then navigate to Application Support > Adobe.

  Open the Adobe folder and rename the OOBE, OOBE old and AAMUpdater to old AAMUpdater.

  Step 2

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '.

  / Library

  It will open the folder System Library.

  (3) then navigate to Application Support > Adobe.

  Open the Adobe folder and rename the folder Caps Caps-old and young OOBE to centenarians, OOBE Adobe Application Manager of Adobe Application Manager.
  

  
  

  Step 3)

  Basket of Adobe Application Manager of Applications > utilities.

  Step 4) [same step again]
  

  Click on the link below and download Adobe Application Manager and install the same:

  http://download.Adobe.com/pub/Adobe/creativesuite/CC/Mac/ApplicationManager9.0_all.dmg

  Once installation is complete, niche is going disappear, and then open the Application folder and locate the icon to launch Adobe Application manager, double-click it and update.

  Once the update is complete.

  Restart the computer once and try to install CS 6.

• Mac lost during the installation of windows

  When installing windows on a MAC, I deleted my partition mac completely and I am now left with windows 7 to my mac book air. Y at - it an option to install mac, I don't mind losing the windows partition

  Hello smarthala,

  Thank you for using communities of Apple Support.

  I see that you deleted by mistake your Mac partition during the installation of Windows. The partition itself deleted or was it the Mac OS that has been erased, leaving an empty partition?

  If the latter, you can reinstall OS X from OS X Recovery. See this article for how that should be done: On OS X Recovery
  Otherwise, you can use Internet recovery (Command-Option-R, as opposed to the command-R) to repartition the entire hard drive and install the version of Mac OS X provided on your Mac. Who is finished, you can upgrade to El Capitan via the App Store > bought.

  Best regards.