Mini yet that WT7-C-100 don't invoice not turns on

Hello

I have a Toshiba still WT7 mini tablet and (almost) since I upgraded to Win 10 it does not load and won't turn on.
I could load and use the tablet with 10 windows for a few days or a week, but after that I can't load it via his official charger adapter and USB cable. It has an output of 5V / 1, 5
I have no higher amp charger, only for mobile phone with a few hundred milliamperes.

Does anyone have the same problem? What should do? (I'll call my ASP asap).

Thank you

Posted by petersm
Hello

I have a Toshiba still WT7 mini tablet and (almost) since I upgraded to Win 10 it does not load and won't turn on.
I could load and use the tablet with 10 windows for a few days or a week, but after that I can't load it via his official charger adapter and USB cable. It has an output of 5V / 1, 5
I have no higher amp charger, only for mobile phone with a few hundred milliamperes.

Does anyone have the same problem? What should do? (I'll call my ASP asap).

http://www.hard-reset.com/Toshiba-en...ARD-reset.html

Thank you

After a few weeks of trying the Tablet accused itself and since she works again. I used the same original cable and charger adapter I think.

Tags: Toshiba

Similar Questions

  • Updates configuration: phase 2 of 3-100% full. Do not turn off your computer. Don't know what to do next!

    I have a 503WM Compaq Presario with Windows Vista Home Premium, which has problems after a Windows updated today.  First of all, I have installed .NET Framework (3.5?).  Windows Update started and downloaded a few other updates, and then asked to restart my computer - on restart received the updates configuration message, but when you have to configure the updates: phase 2 of 3-100% full.  Do not turn off your computer, nothing happens--or my hard drive internal or external are doing something and Ctrl-Alt-Del does nothing.  What should I do next?

    Before that, I installed Hallmark Card Studio 2010 Deluxe and received an error message 2738.  Followed the instructions on Microsoft to add two files that had to do with the VB script.  Hallmark installation instructions downloaded then installed .NET Framework 3.5.  The update of Windows has started and installed (I think) 4 critical updates.

    Hello

    I guess that part of the question could be a driver which is really old or similar should not be loaded.

    This exit Windows updates on (after you have access) and stop the updates of the driver to load.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ---------------------------------------------------

    You can use the solutions in this KB - 3 methods and I listed a little help for them below

    The update is not installed successfully, you receive a message, and the computer restarts when you try to
    install an update in Windows Vista
    http://support.Microsoft.com/kb/949358

    Method 1: Start Windows Vista with the Windows installation media and use the repair feature

    How to do a startup repair in Vista
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    You can also do a safe mode startup repair to access the Recovery Options If you have them available
    or use the DVD as described above.

    This tells you how to access the System Recovery Options
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    Method 2: Start the system in safe mode and then use the system restore feature

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can also do a restore of the system of starting with a Vista disk.

    Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
    x 64 64-bit.

    The update is not installed successfully, you receive a message, and the computer restarts when you try to
    install an update in Windows Vista
    http://support.Microsoft.com/kb/949358

    ------------------------------------------------------

    Once you are in Windows I was running once again reset here as a precaution.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Hope this helps sort it out for you.
    Rob - bicycle - Mark Twain said it is good.

  • Computer stuck with screen reading "Configuration of updates: phase 2 of 3-100% full." Do not turn off your computer. »

    Original title: my computer has been slain with screen reading "Configuration of updates: phase 2 of 3-100% full." Do not turn off your computer. "for a week.  What can I do to get it to progress?

    My computer has been slain with screen reading "Configuration of updates: phase 2 of 3-100% full." Do not turn off your computer. "for a week.  What can I do to get it to progress?

    Hello

    You can try the troubleshooting provided in the link below steps to fix the problem.

    An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

    http://support.Microsoft.com/kb/949358

  • Yet Mini WT7-C-100 showing EFI (do not start to any OS) screen?

    Hi all

    A friend at work gave me his Tablet week last to look to see if this can be fixed.

    The problem is that after the Toshiba logo an EFI Shell screen with no option to go out or change it, it shows the following:

    Device mapping table
    BLK0: BlockDevice - Alias (null)
    PciRoot (0x0) /Pci (0 x 17, 0 x 0/Ctrl(0x0)
    BLK1: BlockDevice - Alias (null)
    PciRoot (0x0) /Pci (0 x 17, 0 x 0/Ctrl(0x1)
    blk2: BlockDevice - Alias (null)
    PciRoot (0x0) /Pci (0 x 17, 0 x 0/Ctrl(0x2)

    Press ESC in 1 second to switch startup.nsh, any other key to continue.
    Shell >

    I tried to plug a keyboard using a micro USB to USB without success and also tried the FLIGHT button more power but can't the configuration option. The Tablet is my sons of friends and he doesn't think that the recovery system was setup.

    One of the members of the forum have any suggestions?

    Any help is appreciated massively.

    Concerning

    HanS

    Try to start the recovery by using the HARD drive recovery procedure.

    If you want to access the boot menu on Please press on and press and hold the "flight +" and switch on the device by pressing the power button / stop.

    After a few seconds, the boot menu is displayed.
    Then select "HDD Recovery" and the rest of the procedure is similar to the procedure of restoration of Windows 8 which you can find here:
    http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

    If this does not help, try to recover the Toshiba WT8 / a Tablet from a created recovery media
    http://APS2.toshiba-tro.de/KB0/HTD4103K90000R01.htm

    If you do not have the recovery media, you can order it here:
    http://backupmedia.Toshiba.EU

    I keep fingers crossed for you...

  • I have no other protection other than that which came with windows, I can not turn on Windows Defender, I get "error: 0x8007054b4.

    My OS is Vista, I have a HP laptop its about 3 years old. When I try to turn on windows Defender I get:

    Windows Defender met a
    error: 0x800705b4.
    This operation returned because the time limit has expired.

    Hello

    Defender is not sufficient protection

    you need to install antivirus protection

    you would have had a free trial for a new AV subscription

    This program must be removed before installing another AV

    read this information on the Defender:

    ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

    the basics of Microsoft security has its own version of windows defender

    and other anti-virus programs use their own particular type of application to scan for spyware and malware

    It of nothing to worry and is the default action, which is designed for them to do

    If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

    http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

    and here is the method to remove it from startup in vista

    http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

    and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

    http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

    either of these programs free antivirus try after removing any trial that is always installed

    use the free version of either Avast

    http://www.avast.com/free-antivirus-download#TAB4

    or Microsoft Security Essentials

    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=e1605e70-9649-4A87-8532-33d813687a7f

    scan your system for malware;

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
  • I just updated my computer and I have a windows 7 disc that i percisted and now I can not turn on

    Windows was ok on my old system, but my windows is a disk of oraginal were brought from the United Kingdom

    When you install Windows and activate it with a specific product key, only one instance of WIndows is always linked to this PC.  A Windows license cannot be transferred to a second PC.  Each PC must have a single Windows license.  Only if you buy a different product key you can install and activate on another PC.

  • New notebook ASUS Windows 8 by displaying "features of Windows Setup that are 100% complete do not turn off your computer.

    Since the purchase of my new laptop ASUS Windows 8, it took nearly 10 hours to install the 42 "Windows updates", and 22 "Apps updated and running a restart where"configuration Windows 100% full features do not turn off your computer"sitting on my screen for 40 minutes." I can't believe this is the technology of 2013. I'm afraid how long it will take to install Office - can I take the computer back to the seller?

    Hi Duncan,.

     
    I imagine the inconvenience that you are experiencing.
     
    Method 1:
    Start the computer and follow these steps to restore health:
    a. press the Windows key + X.
    b. open Prompt (Admin) command.
    c. type dism.exe / online/cleanup-image /restorehealth and press ENTER.
     
    Method 2:
    I suggest to refer to the section my computer crashes or freezes when it installs the updates and run the fixit the link:
    Crashes Windows or freezes

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

     
    Method 3:
    Check out the link and follow the steps in the article:
    Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
    Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
    Note: It is strongly recommended that you back up all your personal files.
     
    Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.
  • Yet Mini WT7-C-100 - how to boot from the boot of SD card

    Hello guys, I have toshiba still wt7-c-100 mini with 10 GB hard drive. My question is how I can install Android x 86 on this tablet, because when I attach my micro sd card (witch has an image burned to 4.4x86 android) does not appear in the start menu (when I press the button walk / stop and volume to the key).
    Can you tell me how to start menu see the micro sd card. Simply sdd/hdd in there.
    I look forward to receiving your responses! Thanks, have a nice day!

    Look at this article

    http://www.howtogeek.com/191054/how-...rating-system/

    and if it is not useful, try google to learn more. The question is do the bootable SD card, so that the Tablet acknowledges. If this is not the case, try a USB key.

  • Orientation screen Toshiba still Mini WT7-C-100 questions

    Hello

    I have problems with the orientation of the screen of my Encore Toshiba Mini WT7-C-100.

    After the upgrade to Windows 10, I downloaded and re-installed the driver of Kionix and Toshiba display driver. As a result, I've updated the drivers via Device Manager and the following drivers now appear in Device Manager:

    Sensor: Accelerometer 3 axes Kionix KXC19 SPB - pilot 1.2.8.4 9/1/2015

    Types of sensors: Fusion for Kionix and Sdo sensor V2 sensor device - driver 1.0.29.5 9/22/2015

    See attached picture 1.

    I tried to allow rotation of the screen on the view menu, under settings, but the Tablet has always (portrait and landscape) hit one or the rotation is always 180 degrees forward.

    Search on Google, I came with messages indicating that the registry under Kionox should have an entry with the orientation of the name and value as a reg_binary: 01 00 01 00 00 02

    I created a new entry in the registry in accordance with the instructions, but it did not help. See attached picture 2.

    Is is something I'm missing or doing wrong?

    Anyone who has the same 7' tablet can check the orientation entry in the registry and let me know the correct values?

    Same problem here can anyone who has updated and did NOT changed the driver let us know their parameters. (Hoping only that things bump)

  • Trying to empty the trash.  After clicking on empty the trash.  An error comes up saying that this cannot be done due to the error 50.  Tried to check and repair disk permissions.  This finished.  Then tried to empty the trash again and got the same error

    I tried to empty the trash. After clicking on empty the trash. An error comes up saying that this cannot be done due to the error 50.

    Tried to check and repair disk permissions. This finished.

    Then tried to empty the trash again and got the same error 50 yet.

    I rebooted my macbook. When it restarted it flashed the apple logo, progress bar began to charge up to 15%, then the black and white code popped up for a few seconds, then a box pops up saying "your computer has restarted because of an error, press any key to restart." It is now is an endless restart loop.

    I can't go in safe mode or in disk utility.

    Any suggestions on what to try?

    Thank you

    What happens when you try to restart without danger as indicated to OS X Yosemite: start in safe mode

  • I have a camera, I was download photos on for years - he told me recently about iPhoto that there is a repair that had to be done

    I have a camera, I was downloading images on years - he recently said about iPhoto there is a repair that had to be done - since then it seems not to recognize and will not download.   I also just got a point & shoot - it also doesn't download - at the same time, I also get a msg that my selection is full... I don't use dropbox, but his recognition of something?  can anyone offer suggestions how to get these downloading to iPhoto again?

    Lets start with some details

    You say you have OS X 10.6.8 - is that correct? What version of iPhoto do you have? How do download you in iPhoto? What exactly happens?

    And if you were told that your box is full, then you use DropBox for something and maybe that's the problem - I suggest that you get with the support of DropBox and solve this and it is likely that it can solve everything

    LN

  • Hello how do I configure Firefox 8.0 so that he asks me if I want to save a password for a Web site. At the present time I don't get not an option whenever I go into a site I know is safe, I have to enter user name and password. I've been good tools etc.

    Hello how do I configure Firefox 8.0 so that he asks me if I want to save a password for a Web site. At the present time I don't get not an option whenever I go into a site I know is safe, I have to enter user name and password. I've been good tools etc.

    Thank you, any help would be help full like whenever I connect to Face Book for example I have to provide all the information and it's a pain

    Soon Alex

    See:

  • Firefox closes randomly. Sometimes when I close something sometimes when I put something in the address bar, or sometimes simply move. Everything closes without any warning messages. When I try to open it again sometimes it says that it is already done bu

    It closed just everything. All the all windows and tabs at the bottom which is reduced to the minimum. Go to the desktop as I have set out.

    Hello Ron.

    Those who are called accidents or CTDs (clear for desktop). There are several possible causes for this:

    1. defective extensions: start Firefox in safe mode to disable all extensions and see if the problems percist. If they are not, try to disable your extensions, one at a time, to see that it is that you difficulties.
    2. defective plugins: disable all plugins that you don't need. The normal user only get a PDF, a plugin, Java, Shockwave and Flash plugin.
    3. the anti-virus settings or firewall: in theory, it is possible that some antivirus or firewall are set in a way that Firefox crash in certain circumstances. NOT browse the web without an antivirus and firewall running and up to date, but make sure they are set to not impede the use of Firefox.
  • Can I connect my MacBook Air to my Mac Mini so that I can use the display of the Mac Mini?

    Hi all

    Can I connect my MacBook Air to my Mac Mini so that I can use the display of the Mac Mini?

    The Mac Mini is the end of 2014 with 2 ports thunderbolt model and is connected to a mini display port monitor.

    I'm just fed up of having to pull on the cable of the Mac Mini to connect the MacBook Air.

    Any ideas? Suggestions?

    Thanks in advance!

    Using the built-in screen sharing are an application like:

    ScreenRecycler

    Only some iMacs support the target Display Mode

    Use your iMac as a display with the target - Apple Support Display Mode

  • I have access to the internet, yet my browsers don't is not loading.

    So I have a problem with my load of browsers. Last night, I opened Google Chrome and the pages started to load, my BitDefender Antivirus, notified me that it had removed a potential virus. As he did, my browser stopped loading. I've refreshed and got nothing. I checked my status of framework and the internet router and it was all good. I reset my router still and still nothing. I checked Mozilla Firefox and Internet explore both with the same result. I let the internet because I can connect to Skype and my Extension on Chrome Twitter let me get tweets and send them. Normal pages don't is not loading. I was able to look at the logs in BitDefender to see which files have been deleted.

    They are here:

    Virus name: directory:

    Gen: ranging .kazy. 3292 C:\Users\***\AppData\Roaming\Microsoft\Windows\shell.exe

    Gen:variant.kazy.3292C:\Users\***\AppData\Local\Temp\dwm.exe

    Gen:variant.kazy.3568C:\Users\***\AppData\Roaming\Microsoft\Windows\shell.exe

    Gen:variant.kazy.3292C:\Users\***\AppData\Roaming\Microsoft\Windows\svchost.exe

    The * are in my name.

    I found this thread,

    http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/4d16a7a7-59e0-4f59-92e9-0d22161569d4

    and I tried all the suggestions. None worked. Need to some how to restore these? I suck at this kind of stuff.

    Edit: I also tried to do a system restore and every time it says restore failed. I did it four times.

    Ok. So the Malwarebytes program has not found anything, but now it works. I don't know what was wrong but his back. Thanks for trying to help.

Maybe you are looking for