"Minor"? Failure in HP Advisor setting/reading?

Similar Questions

• com.sun.faces.el.impl.ElException: cannot set read-only expressions

  Hi all
  
  I have done rendering m using the conditional expression for the selected attribute of < af:selectBooleanCheckbox >, but the read-only check box and I am not able to deselect them or select later.
  
  Here is the code:
  
  * < af:selectBooleanCheckbox value = "#{rank." Eligible == 'Y '? "{true: false}" id = "selectBooleanCheckbox1" / >. *
  
  If I use the JSF HTML component like * < h:selectBooleanCheckbox value = "#{rank." Eligible == 'Y '? "{true: false}" id = "selectBooleanCheckbox1" / > * and uses conditional expression, the box is rendered and I am able to select or deselect. However once I have send the form then throw it upwards under the exception:
  
  com.sun.faces.el.impl.ElException: cannot set read-only expressions
  
  Thank you.
  
  Kind regards
  R N V Prasad.

  Hi Prasad,

  You don't mention that you use for your model layer; the easiest way to proceed is to expose a Boolean attribute on your model layer and link box to the. If you use ADF business components, just to create a transitional attribute and create a getter for her in the java class that will return true or false, depending on the value of "eligible" in the same way, create a Set accessor, which sets the 'eligible' O/N according to if true/false is passed.

  John

• MIB for channel RF/setting read on autonomous Access Points

  Hei everyone.   Does anyone know if there is a channel RF of SNMP mib sfor reading/setting and other RF settings on stand-alone 1131AG Accesspoints. In my network, we use "less congested frequency" choice for the selection of the channel and wants to be which is the result of this.

  Best regards, Roy

  "Less populated frequency" does not... be together your AP to a specific channel or put in evidence that channels 1, 6 or 11.  You can use a mib to seethe list mib browser... This migh link... help tram know if its different from the 1131AG:

  http://www.oidview.com/MIBs/9/Cisco-dot11-if-MIB.html

• Dynamically set read-only columns in the tabular presentation at record levels

  Hello

  Is it possible to activate and deactivate fields at the level of the line in a tabular presentation... I use OFA to create a page that should give the possibility to activate and deactivate certain fields in the table on the fly...

  Here's the requirement:

  examples of data

  Item_code |   Review | Point Attrib1 | Article attrib2 | Article attrib3 | Columna | ColumnB

  1.234               100           A                         B                    _                  A               _

  1.235               100          B                              _                 B                 _                   A

  fields point attrib3 and Columnb should be read-only if the value of attrib1 point is A

  Even if point value attrib1 is B columna and attrib2 of the element must be read-only...

  I have PPR on item_attrb1 to manage the change of value in the attrib1 element, but I'm not able to make fields read only at the level of the line... Please help me if someone has work around this

  Is this possible?

  Thank you

  Dilip

  Hello..

  It is possible. Made myself.

  You must use SPEL for this.

  Steps to follow:

  1. the Caisse one type of transitional say as Boolean column ReadOnly

  2 set the Readonly property for that column as ReadOnly

  (Syntax FRO SPEL-> {oa. VO. ReadOnly})

  3 al ' PPR after checking the status, the ReadOnly Anaïs value accordingly.

  .

  You can get the idea here.

  https://blogs.Oracle.com/manojmadhusoodanan/entry/hiding_an_item_conditionally_through

• nvstor64 error - failure of HARD drive to read data

  Backup and restore system is unable to complete - after investigation, about an hour after the backup operation to the system event log records a large number of errors in nvstor64 - "failed to read data from the HARD drive" and the abandonment of the backup operation.  After investigation, I found that the nvstor64 replaced the windows driver update disk drivers HARD during a computer video card.  After many contacts with support from nvidia and further consideration, the problem is reduced to the State of the offence alleged in the second hard drive backup (Seagate 1 TB Baraccuda - development since 2/2011).  When you run the HP disk HARD diagnosis on this drive, it does not hard "SMART short self-test" step with the error message "fails first LBA 45511183".

  Here's my question.  Run the chkdsk BACK on this disc utility passes - no bad sectors.   The HARD drive is visible in the operating system and appears to be fully accessible.  I moved 100 GB of files from the disc to others in the network with no apparent problems.  This really works test by the "SMART short self-test?  This is a 'false positive' test failed?

  Paul

  Pavilion p6210f

  Windows 7 64 bit

  6 GB of system memory

  C: WD 1 TB 7200 RPM HARD DRIVE

  F: drive HARD Seagate 1 TB 7200 RPM

  Hello smithdp,
  
  The SMART test tests in-depth hard disk. Here's the Wikipedia record for the short trial (they can explain better than me).
  http://goo.GL/XYCvm.
  Short
  Check electrical and mechanical performance as well as the disk read performance. Electric tests could include a test of memory buffer RAM, a read/write circuits test or a test of the read/write head elements. Mechanical test includes seeking and servo on the data track. Scans small parts of the drive surface (area is provider-specific and there is a time limit on the test). Checks the list of areas that may be read errors in waiting. (Usually less than two minutes.)
  
  Having said that it is not perfect, because no test is, it could be bad, or it could be on-site. Sometimes the SMART test can give a warning, but the drive will not fail for another month + is just a 'heads up '.
  
  Now, with your error in particular LBA is logical block address. The error you are getting is that there is a block (45511183) that the test has detected an error on.

• Windows Media Center - TV live - installation via a TNT set reading and decoder

  I have problems to display live TV via Windows Media Center (version 6.0.6001.18254).  My apartment block still has an analogue ariel so I reinstalled the TV through a decoder DTT channels.  Media Center has implemented a TV Guide including only BBC 1 and 2, 1 of ITV, Channel 4 and Channel 5.  TV Guide is visible in access, but live TV does not work. Can anyone help?

  Hi Kim Dean,.

  (1) it worked very well?

  (2) remember to make changes?

  (3) you get an error message?

  Method 1: You can follow the steps mentioned in the link below

  Solve problems with watching TV on your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

  Method 2: Also, see the steps in the link below

  Troubleshoot Guide downloading problems in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-guide-downloading-problems-in-Windows-Media-Center

  You might want to know

  Set up a TV signal in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-TV-signal-in-Windows-Media-Center

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• Legend of failure shows only not in reading

  The legend of default does not appear for me, when I record a demo/simulation manually. I selected the failure Caption checkbox for the click on options in the box and the caption text is entered, but when you click outside the click box nothing will appear when output. It shows if I use the car to the registration option but I don't like the way it displays images in the order that I record against so I end up needing to take manual capture that presents the problem of feedback again.

  It worked - thanks for the tip!

• Put in read-timeout = 0 in the customer pool of gemfire cache xml

  Hi all

  What is the result to read-timeout = 0 in the customer pool of gemfire cache xml

  For ex:

  < name of pool = "testPool" read-timeout = '0' attempts = "5" >
  < host = 'test' port = "1000" / >
  < / pool >

  I ask because of this bug note of http://www.VMware.com/support/vFabric-GemFire/doc/BugsFixedGemFire66.html

  12/02/07

  #36349

  Client gateway region.put () ends without exception, but the input value is not updated at the server level

  5.0

  closed

  Value of the entry to the server is not updated, although customer region.put ends without exception

  This occurs when the operations are performed on the server down. The problem arises from this sequence of events: 1. a client attempts to set the X value one or more times, but each attempt times out. 2. each attempt failed "orphans" a thread on the server. 3. the customer chooses a new connection (and its associated server thread) and continues to perform its sequential (X + 1, X + 2 updates... X + n). 4 orphaned threads are subsequently demand and successfully put it with the value X, overwrite the values previous (X + 1 or X 2 or X + n).

  Disable the behavior of time-out for the BridgeLoader, BridgeWriter or BridgeClient by setting its "readTimeout" zero setting. This causes all operations in the region managed by the client to block until the server has finished with operation, preserving the customer order. The configuration of "retryAttempts" will always be used when there are failures in communication with the server or when the server cache closes in the middle of the operation.

  This problem still exists with gemfire 6.5.1?

  Thank you

  You are welcome.

  To clarify, read-timeout = 0 not cause the customer to always block for gemfire 6.5?

  No, the behavior of the read timeout has not changed, this will cause the client to block forever. It is just a workaround for the problem that you referenced. This issue, ticket #36349, has been set, it is not necessary to use the workaround more. In other words, you must set read-timeout to 0 to work around this problem.

• reader opinion, hide left panel

  I want to hide the present left in view of Reader Panel.
  Setting reader.toolbar.vertical to false in: config has no effect after reboot.
  How to hide this Panel on the left? CSS or something?

  You can add code to the userContent.css file.

  • http://KB.mozillazine.org/userContent.CSS

  #reader-toolbar { display:none !important; }
  

  The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the folder of chrome in the Firefox profile folder.

  • http://KB.mozillazine.org/Editing_configuration

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • Create the folder chrome (lowercase) in the .default < xxxxxxxx > profile folder if the folder does not exist
  • Use a text editor to create a file userContent.css in the chrome folder (file name is case sensitive)
  • Paste the code into the userContent.css file
  • Save the file as userContent.css in the chrome folder

• failure of HD 6710 b need advice to fix

  Last week, the system stops. At startup, the screen went "HP" to buy "Windows" then stalled and instead to START, the system went into F8 screen. (modified with fewer options) I can't return to boot in any mode offered. System Bios check ran (version f 11) and he said "Read Failure" then defeated HDDisk it read "hard Drive1 failed, replace. I can't find the part of the partition without drive recovery, or system recovery files. I use XP Professional.

  So, having a limited income, I can buy a guaranteed 5 years of hard 200 GB for $35 refurbed. What else would need to buy, and there will be one after installation problems?

  Thank you...

  garyslt wrote:
  

  Thank you!

  Let me make sure I understand... I need only the recovery discs?

  or a new hard drive AND recovery disks?

  I know I'll lose my data, I just want to be sure to have installed everything as I received when buying in 8/2008. I realize that I may need to uploa some readers

  Thnks...

  Time, a new hard drive and recovery disks for reinsdtall the operating system and software. HP recovery disks will install everything, after having reinstalled using recovery disks, you will need to do some Windows updates and you may use the support HP assisitant to update the drivers from HP and the software.

  .

• Display success or failure in report based on the return value

  Hello

  I try to incorporate TestStand to TestComplete by using the ActiveX/COM server adapter  I have the COM setup so that TestStand can call a test in TestComplete and have TestComplete to return a string value (true | false) to TestStand.

  Now I need to get the TestStand report to view 'pass' or 'fail' text for this call sequence, by the return of TestComplete string.

  Is there a place in Expressions or Actions Post I can say and how:

  Returns 'True' = pass

  Returns ' false ' = failure

  Thank you.

  Hello

  (Option 1). Use a string value Test.   The Limits.String would be 'True '.  It would be the easiest because you already channels return of your ActiveX call.   You could do your ActiveX calls a test of a string value.

  (Option 2). Use a step of success/failure.   You can set the string returned in a local variable and then create another step of success/failure that would pass/fail criteria as Locals.StringReturned is 'True '.

  Here are the two options that we hope can help you get started...

  Thank you

  PH

• HP Pavilion g7-2054sa Notebook: imminent hard drive failure - code GLQ3J0-65V838-MFPX0J-60C403

  I have the black screen at startup saying hard disk failure is imminent. Controls of the f2 said

  Drive hard SMART test failed

  ID GLQ3J0-65V838-MFPX0J-60C403 failure

  Product ID B1P45EA #AEU

  What it means? I also get messages on Windows 7 hard disk failure is imminent. What is in fact a hard drive failure?

  The problems started after system restore to a point previous (5 days ago) after downloading some updates of the site Web HP that have been identified as relevant, but caused freezes, which is why the restoration to the previous point. Still trying to get an idea of the problem areas. Most things work very well, but Windows Media Player does not properly is the most obvious fault so far. More I bought a new external hard drive to perform the emergency backup, but it is not recognized when I plug. It is however grateful already used very happy memory sticks.

  I'm likely to have a real failure, or is a false reading because things did not settle down properly after the system restore?

  I am not technically very advanced - perhaps at the limit of my understanding so simple popular suggestions/instructions.

  Thanks for all those who have followed this demand. Problem solved - I took it to a local repair shop in the end. While I could probably physically replace the drive myself quite easily, I wanted the confidence of an expert to provide the correct replacement and manages the much larger task to transfer everything at the latest so that I can resume normal with all that where it should be.

• Imminent disk failure toshiba mk6465gsx ata device - utility?

  My laptop DV6 gives sudden message that there is an imminent disk failure.    Recently saved.  Reading on a support page that could be a problem with the CHIP.    Article says to download the Seagate utility, but it is a Toshiba drive I have.

  I don't see a similar utility from Toshiba on this site.

  Any advice?

  I tried to restart;  had problems to do this (told me to reload the operating system on the 'black' screen).  If turned off the coast during the night and started well the next day, but still give the warning of Imminent failure (which I've since turned it off).

  The hard drive is about to fail completely and must be replaced. If you are still in warranty HP will send a replacement. If this is not the case, a laptop SATA hard detail can be used. Just be sure to get a quality at least equal the original in order to use recovery disks. It may be big, but not small ability more. For example if you have a 500 GB hard drive you can use a 750 GB hard drive, but not a 320 GB hard drive.

  If you need help with selection and replace of the disk station hard back with model number & full product as indicated on the Service tag on the bottom of the laptop.

  How can I find my model number or product number

• Failure of XP Mode User Interface

  After update mode XP de Windows 7, update to reboot hung on logout. Now, it gives message on restart XP Mode User Interface failure.

  The message reads as follows:
  «You cannot start a remote desktop connection because the Windows login on the remote computer software has been replaced by the software incompatible msgina.dll.»

  To correct this problem, please ask the administrator of the remote computer contact the program vendor for a version that is compatible with Windows. »

  XP mode does not start safe mode. Message "cannot start Windows Virtual PC Host Process. Check the log of the events system for more details. Server execution failed. »
  The event log showed that the normal start of the items for XP Mode.

  Additional notes about XP Mode start in Normal operation:
  1 icon starts Windows XP Mode.vmc
  2. from the virtual computer dialog box is displayed.
  3. the User Interface dialog appears.
  4. hibernation dialog box appears and closes after completion.

  I also tried a system restore, but that did not help.

  Hi James,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

• Virtual Collection ISE failure in PI 2.2

  We use a virtual ISE, which I have now added to the first.

  First thing: device type is set to "no supported device Cisco" - but first 2.2 supports ISE 1.2.x is not it.

  Anyway... CLI and GUI credentials are set correctly, but after syncing, it said "The partial Collection - CLI Timeout failure"

  Even after setting the time-out waiting SSHv2 so 120secs it happened again.

  Any ideas?

  Thank you very much

  Preferred infrastructure integrates with an ISE server as a data source. You add through the Administration on the IP page.

  It is not really manage an ISE server except in the most basic sense (up/down) as he would any generic server. It will not collect or modify the configurations of EHT via SSH or it queries via SNMP, as it would for a Cisco switch, router, or WLC.