Mirosoft 6to4 adapt isin can't work because windows cannot load the drivers required for this device (Code 31)
I replaced a heatsink and fan in a laptop of friends. The laptop works fine now. In Device Manager, however, I'm getting a code 31 for the Microsoft 6to4 adapter. Is it because this person uses several networks? Is it because I'm connected to my home network? Or I did something wrong during the reassembly? Someone of you know this?
If you experience any problems you can ignore it.
See these:
Microsoft 6To4 card issues
http://www.ehow.com/way_5602460_microsoft-6to4-adapter-problems.html
On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.Microsoft.com/kb/932520/en-us
Tags: Windows
Similar Questions
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas: where can I find these adapters
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
Control Panel - Device Manager - do a right-click on the two - UNINSTALL - REBOOT
Nothing else to do, Windows will do the rest. And you can ignore errors if
you want and on some computers, it will always be there but don't cause any trouble.On a Windows Vista-based computer or on a Windows Server 2008-based computer, the
Map Microsoft ISATAP appears with a yellow exclamation mark next to it in device
Manager and you also receive an error message
http://support.Microsoft.com/kb/932520I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.
Thanx
Hi rui2010,Place your machine in a clean boot State to see if another application is in conflict with the modem.If this fails, I recommend you reach out to the community Hauwei for assistance:Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »
Is anyone know how can I access my hard drive again?
Thank you
Hello
You has made changes to the system before the error appearing? Cancel the changes.
(1) in Device Manager > right click on the driver, and then select uninstall
Reboot and Windows will reload the driver
(2) remove the upper & lower filters that cause errors in Code 31
http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm
Access the manufacturer's Web site and search for updated driver
-
Original title - USB - IF xHCI USB Host Controller
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
I have a permanent error on my computer and when I run the troubleshooter I get the above message. It says Windows cannot load the driver.
Hello
USB devices remove all you can - restart the computer - is still there, the error? If it isn't
It is related to one of the add-in devices that you removed. If she is still there, then, the question is
either a device internal who can not remove or physically with the USB bus itself.
If it was not there, add devices at a time until it is displayed - keep in mind that it is
possible that there are two (or more) devices in conflict over the issue. Once you
identified the check of the aircraft with the help of the manufacturer.1. to find the control panel - device - device - right-click on it - uninstall - Manager then
Restart the computer to see if it clears.2. same place - double click on the device - driver tab - driver update - to see if that helps.
3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
online documentation and drivers, diagnostics and ask questions in their forums on all known
questions. Update the Bios and chipset or other USB drivers.=====================================
If necessary, we will use these additional troubleshooting methods:
How to fix Code 31 errors
http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htmI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
Hello
Have you tried to update the drivers as suggested by Basith M?
Method 1:
You can run the fix provided in the link and check out them.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/GP/hardware_device_problems
Method 2:
You can also try the procedure described in the link to troubleshoot driver issues.
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
See also the proposal contained in the link and check.
On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.Microsoft.com/kb/932520/en-us -
Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.
Jake
Hey Jake,
Follow these methods.
Method 1: Follow these steps:
(a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.
(b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.
(c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:
Remove or reconfigure newly installed unit.
Restore a version prior to updating the driver.
Use system restore to undo the Device Manager recent related changes.
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
(d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Method 2: Update the latest graphic drivers.
Updated a hardware driver that is not working properly
-
Hello!
I have problems connecting to my network. I stay in a House (not my own) and I can't connect to the network in this House. When I choose the option 'connect to a network', nothing happens. I followed the instructions to display the "Device Manager" and watch the 'map', and he said:
"This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »
When I click on this button, nothing happens... Should I simply wait for Microsoft to return to me - or is there something else I need to do?
Thank you!
Hello
You must get the drivers latset for m computer support site.
Delete the "false: entry in Device Manager and install the new drivers."
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Original title: WAN miniport driver
A yellow sign appears on MINIPORT Wan (IP), MINIPORT (IPV6) AND WAN WAN MINIPORT (NETWORK MONITOR) for this reason I have not access to internet to throw bluetooth tethering that even he does not connect. In the properties of the driver, it indicates:-this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
I use windows 8 in my sony vaioMODEL - SVE15123CNWHi Praveen,
Perform the steps suggested by Nirmal S from the link below and see if it helps.
Answer please if you have any questions.
-
can someone help me please, I need to fix this as its making the computer
Hello
Control Panel - devices - right click on - UNINSTALL - REBOOT Manager
Nothing else to do, Windows will do the rest. And you can ignore the error if you wish and on some
computers, it will always be there but no problem to be expected.On a Windows Vista-based computer or on a computer, Windows Server 2008, the card Microsoft ISATAP
appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.Microsoft.com/kb/932520Hardware devices not detected or does not
http://support.Microsoft.com/GP/hardware_device_problemsI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
can u help me quickly?
Hello
-For how long have you had the problem?
-Did you change your computer, after which the question began?I suggest that you uninstall and reinstall the drivers for video card and check if that helps.
-
I tried to update the drivers but it says that I have installed the last...
See this:
On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.Microsoft.com/kb/932520
You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.
You can uninstall and windows should reinstall on reboot, but you can install it yourself.
How uninstall/reinstall Isatap
http://www.ehow.com/how_7567513_reinstall-ISATAP.html
If you cannot connect to your network, you have another problem.
Try to manually update your (wireless) network adapter. Go to the support site for your computer manufacturer and download the latest driver:
How to upgrade Windows Vista drivers
http://pcsupport.about.com/od/fixtheproblem/HT/updatedrvvista.htm -
Original title: ISATAP adapt #2 does not properly. How can I solve this problem?
My Norton 360 diagnostic report detected a hardware device unusable. The device type is: Microsoft ISATAP Adapter #2 and the device situation mentions that it is working properly and windows cannot load the drivers required - code 31.
I think that it is also affecting my internet connection and disrupt its speed.
Can you please help with this question?
Thank you very much
TonyHi Tony,.
You can try reinstalling the device driver and check if it works.
Uninstall and reinstall the device in Device Manager.
a. Click Start, type devmgmt.msc and press to enter.
b. Locate the Microsoft ISATAP Adapter device
c. right-click on the device and select uninstall
d. restart the computer and check.You can also consult the following article:
On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.Microsoft.com/default.aspx/KB/932520Hope this information is useful.
-
No, it's just done so it was updated.
For 6to4 adapters:
Control Panel - Device Manager - do a right-click on the two - UNINSTALL - REBOOT
Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you want and
on some computers, it will always be there but don't cause any trouble.On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
error message.
http://support.Microsoft.com/kb/932520Check the answer by Diana D. here:
http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/a75e8bf1-9a63-4CF4-BF6C-d43a26175959I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right. -
I get this error message "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) "via a wired connection. And that's the Microsoft 6to4 adapt #7 and the same card but the #4 one. Are these drivers or another file that I could use DL?
Hi JasonBedgood,
1. Once you get the error message?
2. did you of recent changes on the computer?This error occurs if the required driver is not installed or the driver is damaged.
I suggest that you update the driver for the device and check.
How can I update the driver for network card on the computer
1. click on Start, click Control Panel, and then double-click System.
2. click the tab hardware , and then click Device Manager.
NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
3. click on network adapters to expand.
4. under network adapters, double-click the entry for Microsoft 6to4and then click driver .
5. click on Update driver software.
6. follow the Wizard update software driver to update the driver for NICs .Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctlyIf the device driver update did not help then check the link below for one of the thread with the question and try the steps mentioned by Lionel Chen on January 9, 2008
http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Updated macbook pro today for the latest version of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?
-
So, I am wanting to buy an app from iTunes, but I have not currently no credit card information associated with my account. The payment option has the value 'None '. If I put my credit card information and buy the app, I can change the option back to
-
second memory RAM for HP Envy dv6-7260er
I want HP dv6-7260er. I would like to insert a second strip of RAM. but I can't find the instruction where it is. in the lower and one compartment in the instructions I found there are two. but the program write that there is a second slot Help, plea
-
Hello everyone Is it possible to change the setting on phones access to the settings? I want to change all the phones in a disabled device pool to restricted. I can't find anything under Administration in bulk. Any help would be greatly appreciated.
-
Windows 7 does not stop correctly
When we stop windows 7 on our Dell laptop purchased recently everything is disconnected and no error message appears during the shutdown, but when you start the system again we receive an error message that says windows 7 was not correctly closed mod