Mirror AirPlay with Apple TV ethernet connection?

Similar Questions

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• No picture when using my iPad on Airplay with Apple TV

  I'm trying to play a movie from my iPad to my TV via Apple TV using Airplay and I get only sound - no picture.

  Hello

  Scan press for the control panel air play then check mirroring

  Try again.

  See you soon

  Brian

• Windows 7 - no Ethernet connection

  My Windows 7 desktop internet connection fails to connect with the wired ethernet connection. Wireless Internet is fine. The problem seemed to start after a series of updates to Windows in December. I have them down one by one, and KB2898785 seems to be the culprit. It automatically reinstalled, the connection did not work once again, I supported it off once again, the connection worked again. This has happened several times. I know now that I could have / should have hidden this update, but did not at that time here. One of the moments where I backed the update, the connection still did not work and has not since. I've been spinning my wheels restoration at each point of restoration available without success. Manage the network device map 'cannot start (error 10). I downloaded the latest driver using my laptop and installed it on the desktop, but it made no difference. As the network adapter worked when I backed up updates I think this isn't a hardware problem. I'm running out of ideas, someone has a suggestion?

  Hello Gene,

  Please keep us updated on the status of the issue.

  I am pleased that the issue is resolved.

  Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.
   
  Thank you

• My new Apple TV v4 does not smoothly on Airplay with my MacbookPro and Air laptops but with the iPhone and iPad Airlay gets so juddery and then goes off - laptop computer WiFi connections all that happens on clues?

  Devastated to find that the new AppleTV works great on Airplay / mirroring with the iPhone and iPad devices but completely useless on the NEW laptops.

  Trying to show any video for example utube creates immediately hop on the TV screen when you use the Macbook and in no time the WiFi connection is stunned.

  What is going on?

  I use ElCapitan, and the last 15 "16GB i7 Macbook MacbookPro and not expect a problem with streaming media.

  Absolutely well on Airplay with bith an iPhone 6 Plus and also an Air iPad

  This will be due to a network problem. There is a difference between mirroring of a phone/Tablet and grow to a full desktop in real-time

  Mmake that there is no other activity (other streaming, web browsing, backup network etc.)

  Try to connect the Apple TV via ethernet

  To see a current state of the network to obtain a report of istumbler or similar. Look for the strength of the signal, noise, networks nearby

  Test on another network

• Several TV with Apple TV in one room and over an ipad, they will interfere with eachother via airplay?

  I intend to have 2 separate in a single room, TV screens both have boxes Apple TV connected via HDMI and there is no internet connection. I wish I could use 2 ipads separated in the room with all of them connected to one of the TV at the same time. These will connect via airplay independently not to interrupt it when the connection / disconnection? I want to just make sure that when a person is going to connect on the airtime that it does not interfere with the other person already connected to one of the TV. I hope this makes sense.

  What you're trying to achieve?

  You will need a WiFi network.  In addition, you will encounter the questions initially put in place without an internet connection of your ATV.

  With all of the above present, it is possible to get to work.

• Impossible to mirror with apple TV (3gen) to iOS9

  It is found that after you update your IOS in iPad, iphone, and iPad they don't no more mirror with apple Tv, it's just showing the apple tv but only in the speaker and when I play something it's just sounds, but nothing else, I tried with pro (el capitan) macbooks and works, I try with ipad (IOS8) and works , but nothing with the IOS9 into the iPad and iPhone.

  I did the update in apple tv, but still doe does not make me an update to the apple TV for the last OS released, just the preview.

  So my problem is that I am apple dealer, and if the apple Tv does not work with the latest iOS in iPhones and iPads, I can't sell it until there is difficulty or interruption.

  I need an answer

  We are not resellers even as apple dealer I hope you have a better plug the hose to apple, then this because this is a user to help the user forum, but above all, I would say private civilians

  but I can tell you that my iPhone 6s and ipad2 with latest versions of ios is perfectly capable of mirror airplay to my appletv 4g

• El Capitan Mac not mirrored with Apple TV 4

  When I try to reflect my Mac my tv screen just goes black and nothing is displayed. Even in the menu bar on my Mac it says air play to 'Apple TV' but I get no display options like I should see if I like mirror, or use a desktop separated, any of these options. Is there something I need to enable / disable to get my Mac to mirror to the Apple TV 4?

  Hey JBS - GUY,.

  I understand that you do not get anything to display on your TV if you use AirPlay from your Mac to your Apple TV. In such a situation, you can be in extended desktop mode, rather than mirroring. You can switch as shown below.

  Your screen in mirror or extend your desktop

  You can also use AirPlay to mirror or extend everything on your Mac screen. The display must be connected and awake.

  1. Click the AirPlay icon in the menu bar, then click on your Apple TV under 'Connect To Display AirPlay.' The icon lights up blue when your Mac uses a display AirPlay.
  2. In the same menu of AirPlay, choose extended desktop or an option in mirroring "use AirPlay display to.»

  Use AirPlay to view a video of your Mac on a HDTV
  https://support.Apple.com/en-us/HT201343

  Sincerely

• Can I connect more than one headset bluetooth with Apple TV 4?

  Can I connect more than one headset bluetooth with Apple TV 4?

  No, sorry. This is a limitation for all devices Bluetooth headset.

• I have a macmini (mid-2010). Is it possible that I can use Airplay with her to my newly purchased Apple TV?

  I have a macmini (mid-2010). Is it possible that I can use Airplay with her to my newly purchased Apple TV?

  Mini Mac must be 2011 or later to use AirPlay > Use AirPlay to display video from your Mac to a HD TV

• Hey Apple EL Capitan, tear off my ethernet connection how to fix

  Hey Apple EL Capitan high my ethernet connection how to fix it.

  You use the updates. He is push a day or two later that should be fixed.

  See here if the update doesn't fix it: el capitan ethernet does not

• The Web of LabVIEW user interface directly to the sensor with Ethernet connection

  Hello

  Is it possible to connect to the interface user Web of LabVIEW directly to a sensor with Ethernet connection?

  By directly, I mean without using any Web Service LabVIEW VI.

  Thank you

  Marcelo

  Hello

  The only communication with other devices using the Web user interface designer is through web services, either motorized or not LabVIEW. To connect with a sensor with the generator of the user Web interface without using LabVIEW, the sensing device must be accessible via HTTP and give you a way to read its data using XML web services based on.

• Cannot install iOS 10.0.1 with Apple Configurator 1.7.2

  Hello

  I have 60 iPads in 5 carts (12 per basket) that I need to install some applications on. They are already configured and supervised with Apple Configurator 1.7.2. I've never had problems in the past with AC1, I've always been able to install the updates and applications easily with very few questions, because of that I've never felt the need to update to AC2. However, this time during the update of ios and refreshment, I get the error 'complete with an error - cannot install iOS' 10.0.1 And now 12 of my iPads are stuck in recovery mode.

  I tried before wipe them off and re supervise them, but I always get the cannot install iOS 10.0.1 error, followed by all the iPads stuck in restore mode. I tried to update only 1 or 2 at a time. I tried the update/supervise them with no apps queued for installation. I tried to restore the iPad via iTunes, which works, but when I try to put it back on AC1, I still get the same error mode and recovery.

  I tried searching online for compatibility with the new iOS and AC 1 problems but found nothing.

  I would like to know if there is more information I should provide that might help.

  Thank you for your time.

  Ben

  Hi Ben

  Makes your iPad successfully update to IOS 10, we have approximately 400 ipads, I've updated a single ipad at 10 IOS using our MacBook pro AC1 OSX El Capitan to test, ill try another now and see if its success.

  When you connect an ipad update the Configurator re-download the IOS 10 or use a cached copy?

  How your Configurator is connected to the internet (behind Proxy, Wifi, Ethernet), perhaps the downloaded IPSW file is corrupted and need to be redownloaded removed\.

  Kind regards

  Rick

• iOS 10 with Apple tv

  How you turn off mirroring function with iOS 10 and Apple TV? I just he plays on my Apple TV, so I can continue to use my phone or my iPad.  It's very annoying to not have a switch like iOS 9

  Put in mirror and basic AirPlay have ΘtΘ divisΘs in iOS 10. When you talk about the control center, you will see the option of mirroring, need to swipe (from left to right) to bring up music controls and the ability to switch between your phone and your Apple TV for basic AirPlay.

• Auto unlock with Apple Watch does not appear in my window security and confidentiality

  "Disable the automatic connection' or Auto unlock with Apple Watch" appears in my window security and confidentiality

  Hello

  Automatic unlocking with Apple Watch is available for the Mac models since the mid-2013 and later running macOS Sierra.

  Check that:

  • Your Mac has Bluetooth and Wi - Fi enabled.
  • Your Apple ID use two factor authentication (as opposed to the two-step verification):
    • For Apple ID - Apple Support two-factor authentication
    • If you are currently using two-step verification instead, follow the instructions here to turn off (under "How can I disable two-step verification?") before you enable two-factor authentication:
      • Frequently asked questions about the audit in two steps for Apple ID - Apple Support
  • Your Mac and Apple Watch are connected to iCloud with the same Apple ID:
    • On your Mac, choose Apple () menu > System Preferences, and then click iCloud.
    • On your iPhone, open the Apple Watch app, then go to general > Apple ID.
  • Your Apple Watch uses a password:
    • On your iPhone, open the Apple Watch app, then type the access code.
  • Transfer procedure is enabled on your iPhone and your Mac:
    • On your iPhone, go to: settings > general > transfer procedure.
    • On your Mac, go to: System preferences > General - down, tick the option "Allow transfer between the Mac and your iCloud devices."
    • If these parameters are already enabled, a user has found that it helped to deactivate and reactivate the procedure of transfer on their iPhone.

  More information:

  Automatically unlock your Mac with your Apple Watch - Apple Support