Mirror backup on the same drive that every week?
I use Vista Ultimate. Now, my 500 GB drive is too full to make a mirror backup. On every 5th or 6th time I have to delete all backup files to have enough room and then start the process over. I don't understand why it is that I only creates a lot of new files.
I have a 2 t disc that has plenty of room and I did my weekly backups on that one. I use the drive 2 t for this process as well as storage of other larger files, I use very often and I have a lot of space to this topic...
I can't find anything fitting thanks to the search on this site or using Vista in windows to answer my question.
Am I able to, for a backup mirror as well on the 2T disk or do I have to have a player dedicated strictly to the mirror?
A special thanks everyone who publishes on this site. He was really so useful for me on many issues a lot over the years.
Hello Milo Bisconer,
Thanks for the return of the response, as well as information. What exactly did you do to fix this? Please let us know so that the information you provide can help others.
Thanks again.
Tags: Windows
Similar Questions
-
All these hard disks are connected via the USB ports, but not all of them are connected at the same time. I use Adobe first Elements to edit videos, & if I open an adobe project it is expected that the video files will always be under the same drive letter.
Have you tried to assign drive letters using disk management?
Mount your drive, thenStart-> Run-> "diskmgmt.msc".
Find your player in the list, right-click on it and select "change drive letter and paths...". »
HTH,
JW -
connection problems on hotmail through msn
After the signing of hotmail, he says that I've not sighed out completely. It is said to close all other open windows and erase cookies, but how ever I try the same thing happens every time by disconnectingHello richardcatchpole,
The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:
Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.
-
I did a backup of the computer on my old HD 110 GB. Install a new 500 GB HD and restore complete pc but windows onliy see the 100 GB on the C drive and the 9.99 on the D drive that were on my old HD and do not see the additional 400 GB. How I can solve this problem.
Hi abgolf3,
The question may be how the new hard drive has been formatted. Take a look at the way in which the reader is implemented by clicking Start > Control Panel > Administrative Tools > double-click on computer management > double-click storage. Is all the space on the disk are responsible? If so, take a look at these two documents for your problem:
Format a hard drive or partition to NTFS format
Dena
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I had a power failure and I learned today that there is a problem with the cache and I need to go to Preferences, purge the cache. I did this, but get the same error message every time I open the subsequent times of bridge.
Mac or PC? Version of the OS? What version of CS?
Have you tried to reset the bridge? CTRL (Windows) / Opt (Mac) + click on the bridge to start icon and select open boxes.
Otherwise, you could manually delete the cache, but we need to know the answers to questions to say where he is.
-
The same drive letter may point to different locations for different processes?
The same drive letter may point to different locations for different processes?
Our users have the E: drive mapped to one place. But I need a scheduled task in order to use the E: drive to point to a different location at the same time, without affecting the mapping of moose for logged in users.
There is no work around this need of ours. This is because users are working 24 X 7 update of our data files on the E: drive, and a log file is made. We plan prevent users for a minute every night while move us / save the log file and then allow users of the resume and allow a new log file to create. Then take the saved log file and apply it to a real set of monthly backup of data files, so the backup files will be ready for a recovery after disaster. The program that applies the transactions recorded in the data files is able to apply operations to files that are considered as being in the same exact location.
I know that's not possible without resorting to the application logs a set of files on a completely different machine. But I ask.
Thank you
Dan
Hello
The question you posted would be better supported in the TechNet Forums. I suggest you to ask your question in the TechNet Forums.
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
I hope that helps!
-
Why the same tabs open every time I have start and open FF
I closed my laptop every night. Use for when I restarted and opened the browser would ask if I wanted to open the previous days tabs, or start a new session of FF. FF doesn't that just as she begins just straight up with the same tabs that I looked a week ago. And when I go on the most visited link in FF and delete tabs, I want open even when they open... How can I fix it.
This happens if your default start page in Mozilla firefox start page
read this for more information:
Thank you
-
If I put all my files on the C drive that has the operating system and make a recovery of keys one, will I lose my files? drive C whereas the partition that has the operating system and drive D is the lenovo drive that has all the drivers lenovo and all those. Did I lose my files?
Yes, the collection clears all of the C drive and you will lose your files. The solution would be to backup regularly to an external HARD drive and after the key one to also restore the files from the external hard drive.
This has been answered before, if you do a search for "key recovery" it appears among the first results.
-
When I try to copy files to a CD, I get the message "Windows has encountered a problem when trying to copy this file." I press the button "Retry" without any result. I get the same message that I have click on 'Copy' files on a CD or drag the files to copy to the CD player. I was able to copy these same files to a CD a few days ago. Thanks for the suggestions.
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
1. don't you get an error code along with this error message?
2. what CD burning software is installed on your computer?
3. what kind of CD do you use to burn?
4. What is the status of the CD - DVD drive in Device Manager?Method 1.
Let us first check the status of the optical drive in the Device Manager. Check if there is no error code or yellow mark is listed.
Reference:
Explanation of error codes generated by Device Manager in Windows XP Professional
http://support.Microsoft.com/kb/310123Method 2.
If the problem is to start the computer in a clean boot state and check if you are able to accomplish this task.
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353/en-us
Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
am I right to assume that the same reason, my windows 7 OS crashed & had to be re-installed seven times in nine months with the losse of precious files is the same reason that microsoft has been duffed the international space station?
Hello
If I understand correctly you install os 7 times, still problem happens, its just a bad sector in plateau, well shot cause want to check your hard drive a d, you need to change your hard drive to solve this problem, if it is in warranty log a ticket
-
When I replaced a hard drive, I wanted the same drive letter, but he wants me to take another. How can I assign the drive letter, that I replaced. The letter is now used by another device?
Open disk management, find the drive using the drive letter you want to use, change the drive letter of this to 'Z', find the new drive, change the drive letter that you want, and then change the drive letter of the drive you have labeled it 'Z' to a drive letter of your taste.
Jim
-
Redesign existing external hard disks and still 6 Lightroom able to find existing photos.
I currently store my pictures on and an external hard drive. Lightroom 6 was not able to find the picture momentarily files. I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos. I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive. However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop. I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet. I would like to turn an external hard drive on a strong letter, warns we hope this previous problem. My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo. It would take more time than I'd like to lose. Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?
I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.
Any help would be welcome.
Thank you!
So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)
Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)
-
Location of the camera raw cache on the same drive as LR?
I know that cache camera raw should be the fastest disk for optimal performance.
I was wondering if it should be on the same drive as the catalog, or isn't it important?
I wonder whether or not you will be able to detect a difference. My Camera Raw cache is on the same drive with my Lightroom Catalog program. But I installed an SSD. Once Lightroom is loaded and running, I couldn't determine a difference in performance. The program loads faster, but as soon as it is running I could not see a real difference.
-
I use LR5.7 based on Windows 7 and got a few pictures 150 000 in a catalugue. Could import, export and rendering speed be increased, if I store the LR catalog on the same drive as my photos? Today, the program, the catalog and photos are all on different drives.
Import and export and rendering speed depends on the CPU. The disk contributes only a negligible amount to import and export and rendering speed. You would spend more time to pass the photos that you would gain in speed.
-
My old laptop is dying. When I tried to install Photoshop elements 7 on my new laptop, he told me that the serial number is not valid. It's the same number that I used before. What gives
I think that this program is covered in the link below
CS2 (or earlier version) activation server has disappeared, then read below
You MUST use the special version and the serial number on the page, not your original drive or serial number
l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm
NOTE that CS2 will not install on a Mac "modern", and when you install the special version of the PPro2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select Windows XP compatibility in the popup of option
Maybe you are looking for
-
How to put a video on santa e260?
I bought a santa e260 version v03.01.11a of my friend and I have been trying to put videos on it but I don't know how to convert the files and what im supposed to convert two? or what im supposed to use program? Help, please
-
Hello guys - our SANHQ is behind the firewall and no access to the internet. Newspapers of the looks are not getting downloaded to dell. Can we use proxy in SANHQ to allow the logs must be downloaded or what is the name of the server SupportAssist an
-
original title: remove administrator account or remove password I am trying to remove a user administrator account or remove the password and I get the error message below. Also, I can't delete the password as an administrator in Windows 7 32 bit or
-
My location uses a PIX 515 firewall to do both a connection from site to site and allow remote VPN users in the local network. I changed the IP addresses a bit, but in the attached configuration file, 10.20.20.0/24 is my LAN, 10.30.30.0/24 is the net
-
Hello 3 for Windows 8: where can I download it?
Hello 3 must be compatible for Windows 8 and 8.1. DOE anyone know where you can download? I have not find any official site or platform of well-known and reliable download with Version 3, Version 2.02 was the last. Thank you very much! Dirk