Missing 32\rundll.exe Windows\System

Similar Questions

• need help to program deleted / 32/rundll.exe file system

  need help with deteleted system32/rundll.exe.files

  Hello

  ·         What is the full error message?

  ·         Were there recent changes made on the computer before the show?

  Follow these steps and check if that helps:

   

  (a) put the CD ROM of Windows XP disc into the CD-ROM drive.

  (b) click Startand then click run.

  (c) type expand X: \i386\rundll32.ex_ c:\windows\system32\rundll32.exe in the Open box, where X is the letter of your CD drive.

  (d) restart the computer.

  You can also try System File Checker analysis to repair missing files or damaged in Windows XP.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Error at startup "the following file is missing or corrupted:C:\Windows\System\Vmm32.vxd.

  Original title: XP pro system does not start programming, I don't have a windows to the file vmm32.vxd system have tried everything that I know, know I have very little of hard disk space on my d drive and the last restore point will not work. My recovery disk will not work

  I have a compaq laptop that I have upgraded to XP pro a few years back. When I have bad it I loaded it on the smallest of my two hard drives and cohave was borderline on memory. Now, it seems that it has affected my computer. I can't do a restore later or cannot start with the recovery disk. It shows that I have a vmm32.vxd windows system file that is missing or damaged.  I tried everything I know and I'm not computer savvy. I'm debating on buying and loading windows 7 but do not know if if I can do it and it will be a fix or I need to first fix the problem of vmm

  Hi Olivia Lee.

  1. did you of recent changes on the computer?

  2. has the recovery disk provided by Compaq?

  3. what happens when you try to boot from the recovery disc?

  Unfortunately, you will not be able to use the recovery disk to repair Windows XP as these recovery discs are very different from the original Windows XP.

  Therefore, you will need to make arrangements for an original CD of Windows XP and later to perform the installation of Windows XP.

  Refer to method 2 in the below Microsoft article on how to repair Windows XP installation.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• file missing or corrupt XP Windows, system restore disks do not work. Help, like xp, like vista or win 7

  My desktop has windows xp media center edition with Service Pack 3 for years, there work and maybe it's time to junk food, however my laptop has windows vista, which I don't like, I have seen windows 7 and am not fond of him either, so what can I do? When I load the system restore disks that it doesn't load until a certain point where it says it is to copy the files, then tells me that the restore is complete. When to start again, I said the file "\system32\hal.dll ' is corrupted or missing and reinstall... How do I do that?  Thanks for any help.

  SADA

  I'm writing this in case others have had the same problem, I had and it was impossible to restore.

  When I pressed "del" and got the installer, I looked in the first box, product information.

  This info was typed in a field of google search on a working pc, and I discovered that I could restore my pc by pressing the ALT key and pressing F8 repeatedly. It will work for Acer Asprire anyway. Just an idea for all those who were distraught as I was and knew nothing about the restoration or what my pc really was. I was lucky and got my restored xp, it works ok and I enjoy it once more.

  Good luck to all of you who have had the same problem I did.

  Whenever I turn on my pc, I find the time to scan the disk and chjeck to find errors etc, just to try to avoid

  have a pc unstabel again.

  SADA

• Cannot remove any Dungeon now bytes not used to message cannot find C:\windows\system 32------rundll 32 exe

  Original title: t hink I deleted add remove program,.

  t hink I deleted add remove program, computer guard me tellin memory full, cannot remove no matter what now bytes unused Dungeon is message cannot find C:\windows\system 32------rundll 32. exe does anyone know what this means and how I can now delete files and programs to make more room, comp is need a cleanup and don't know what to do, any help would be received with gratitude xx

  Hi Juleskk,

  Follow the suggestions below for a possible solution:

  Method 1: You can try the steps in the article mentioned below and check.

  Cannot find the Rundll32.exe file when you open Control Panel

  http://support.Microsoft.com/kb/812340

   

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

   

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While hard disk analysis if bad sectors are found when scanning try to repair this area, all available on which data can be lost.

  Method 3: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Startand type cmd in the box start the search .

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompt, the following line and press ENTER:

  sfc/scannow

  See also:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Let us know if that helps.

• What should I do when my computer is to do the diagnostic test, what happens with missing \windows\system,32\winload,exe?

  Please help my friend

  When my computer is to do the diagnostic test, what happens with \windows\system,32\winload,exe lack what should I do now, it's for a friends computer

  Please see: Missing file \Windows\system32\winload.exe

• error messages: rundll.exe and system32 files are missing or 'something' I have tried to put in the original for my Windows XP Professional disk and could not do. Someone walk me through what to do with it?

  Error message when I try to "Set up the home network" or some other things I try to do. It is the system32 file rundll.exe or that my computer can not find.

  How are you trying to set up the network? Exactly what you do when you get the error? And please quote the error message exactly.
  What is your configuraiton of network (router, points of access, switches, direct cables, etc.)?
  What operating systems are the computers that are running? MS - MVP - Elephant Boy computers - don't panic!

• c:\\windows\system32\rundll.exe please help error message clueless me and computor's not workin right at all

  I have an error message on my desktop saying c:\\windows\system32\rundll.exe ive tried to download a tool to repair, but pc asking what program I want to open again theres none that can run it please help what I do

  Hello

  1. When you receive this error message exactly?

  Method 1:

  This problem occurs because of a missing or corrupted Rundll32.exe file.

  To resolve this issue, follow these steps:

  (a) put the CD ROM of Windows XP disc into the CD-ROM drive.

  (b) click Start and then click Run.

  (c) type expand X: \i386\rundll32.ex_ c:\windows\system32\rundll32.exe in the Open box, where X is the letter of your CD drive.

  (d) restart the computer

  Method 2:

  This problem can also be caused by a virus.

  You can download and run a full scan of the system using the Microsoft Safety Scanner and check if that helps.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Try to change the mouse settings in Control Panel, receive the error "windows rundll.exe host has stopped working".

  When I go into the control panel to change my settings for the mouse, I get the error "windows rundll.exe host has stopped working", therefore, you cannot change the mouse settings, how do I fix it?  My mouse is out of control! :)

  * original title - why windows will not host rundll.exe I would change my settings of the mouse? *

  Hello

  If you use 3rd party mouse drivers updated or reinstall those who, like Logitech, Microsoft
  Wireless and so on.

  =================================================================

  To solve the problems:

  If your: Windows host process Rundll32 has stopped working
  http://www.WinVistaClub.com/T40.html

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right
  Click on taskbar - task manager - take a look at stored by - Services - process -.
  It's a quick reference (if you have a small box left - show for all users, then
  Check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see who are loading is method 2 - using MSCONFIG then after a
  a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Objects of process Explorer - free - find out what files, registry keys and other processes
  have open, which DLLs they have loaded and more. This exceptionally effective utility will be
  even show you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL activity
  in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded
  automatically when Windows starts. For each request, the following information
  appears: product Type of startup (registry/Startup folder), Command - Line String,
  Name, file Version, company name, location in the registry or the file system and more.
  It allows you to easily disable or remove unwanted programs that run in your Windows
  startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not.
  The window Watcher says it all, every window created by all programs that are running, the statement
  If the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

• I am running xp Pro 64-bit and get entered C:\WINDOWS\system32\ rundll.exe error: FQ10 what to do?

  I followed the instructions to load the OS disk, type expand C:i386\rundll.ex_ C:\windows\system32\rundll.exe, etc., but the error continues to appear.

  Looks like you had a meeting with the FBI MoneyPack (Ransomware) malicious software.  Fact that all sounds familiar (FBI, your PC is locked, you need to pay your fine, etc.).

  You must first perform some scanners from reputable and do what they can do, but sometimes leave you with a fake startup item that you must manually remove using something like Autoruns.

  No matter what you use for protection against malware, perform the following analyses for malware, then correct any problems:

  Download, install, update and do a quick scan with these free malware detection programs (not at the same time):

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  SAS will probably report a lot of tracking cookies and you can just let him delete them.

  They can be uninstalled later if you wish.

  The scans by operating clean, restart, and then fix any problems.

  If you still receive the message, delete the element of persistent starting using Autoruns.

  Here's how:

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply turn off (uncheck the entry), reboot, and if the problem is resolved and things work normally and everything works fine, then delete the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.

• How to add and remove programs via the control panel when access pops up an error of windows\system32\rundll.exe

  need to know how to fix the windows\system32\rundll32.exe to be able to go to add remove programs and other options in the Panel

  From the other thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/how-to-access-Add-and-remove-programs-through/852bd751-106C-481F-B471-9f32ddc40eab

  old question, new question so what I do or how to set or return rundll.exe in my computer?

  old question question/new - matter always request how to fix or recover from the windows/system32/rnudll.exe in computer science. I see no other answer to this anywhere

  Hi DadVQ,

  ·         Did you do changes on the computer before the show?

  This problem occurs because of a missing or corrupted Rundll32.exe file. This problem can also be caused by a virus.

  Follow the suggestions below for a possible solution:

  Method 1: Follow the steps mentioned in the article below and check if the problem still persists.

  Cannot find the Rundll32.exe file when you open Control Panel

  http://support.Microsoft.com/kb/812340

   

  Method 2: If the problem persists, I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While hard disk analysis if bad sectors are found when scanning try to repair this area, all available on which data can be lost.

  Let us know if that helps.

• Windows System 32 does not locate khatra.exe is move every time when I start my laptop that I have to remove khatra.exe from my laptop

  Windows System 32 does not locate khatra.exe is move every time when I start my laptop that I have to remove khatra.exe from my laptop

  Hello

  Information KHATRA.exe
  http://www.bleepingcomputer.com/startups/not_used-24897.html
  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• PC with Windows Vista does not restart after installing updates, "Windows could not start...". "File:\Windows\system\winload.exe status: Oxcoooooof.

  Last night, I installed Windows updates on my HP Pavilion dv6227cl and now Windows will not boot.  I get the message "cannot start Windows.  A recent hardware or software change might be the cause.  File:\Windows\system\winload.exe status: Oxcoooooof Info: the selected entry could not be loaded because the application is missing or damaged.  I DO NOT have the Windows Setup disc.

  Hello

  I suggest you borrow the CD of windows vista to your friends

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you be able to start your computer in safe mode, I'd say make clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to see link and check.

  Error: Windows could not start. A recent hardware or software change might have caused the problem after installing Windows updates

  http://support.Microsoft.com/kb/2674065

• I can't start my print spooler, as it says that the following file is missing. How can \WINDOWS\system32\spoolsv.exe I download it?

  I can not start the print spooler as it says that the following file is missing.  C:\WINDOWS\system32\spoolsv.exe.  How can I download it?

  Do a search on your computer, it may have been accidentally moved to another directory. You can also run the System File Checker:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  or you can just try to copy the file from another computer.

• Every day I get this error message and send it to Microsoft. 32\svhost.exe C:\Systems32/Drivers\c30a67ae1d5f4bd4.sys AND C:\Windows\system

  Every day I get this error message and send it to Microsoft.  32\svhost.exe C:\Systems32/Drivers\c30a67ae1d5f4bd4.sys AND C:\Windows\system

  Also: Microsoft called me about a report of my computer.  My daughter thought it was a hoax and hung up.  Is there a way I can connect with this Department once again?

  Microsoft does not automatically contact you if you send details of error for them.  They use these reports to see what types of questions are trending and those that are trending upwards looked at herself.  The rest cannot.

  And your daughter has been very wise - the call she received WAS a scam and she did well to cling to their topic.  Microsoft never call you unless you call them first, and they tell you that they will call back.