Missing buttons in the tab character group?

Similar Questions

• Why are my missing buttons on the tab order list?

  Little weird problem here - I checked my project for the accessibility/508 compliance and noticed that on some of my buttons tab order was somewhat paradoxical. Everything worked and was working properly, but the order was switched off. I open the slide and choose the tab order to reconfigure and found multiple instances of one or more missing buttons in the drop-down list. As I said, given that all the buttons are designed in the same way (text buttons) and they are all available when I test it in the browser, I do not understand how Captivate is not 'see' in the command tab for interactive on the slide sequence - any ideas as to what is happening here?

  Justenuf

  I had to created slides that had buttons incorporated into groups that only appeared when some variables have been triggered or a shared action them changed to 'show' and that caused the "glitch" I saw above.

  So, here's the deal: when you create groups that divide, the buttons, the ordering tool tab in the drop-down slide fails - he can see that the first series of Group of buttons, the rest are not displayed. The only way to the tab order your buttons separated into groups is to do it within the time limit (to the less the more updated version of Cp8). Tab order (at least in the project I'm dealing with right now) is shown from the bottom to the top of the timeline. In the image below, the first button that is activated by tabbing is box 448 group 456, the last is box 446 group 454. (click the box never gets turned on, it is hidden for accessibility purposes) Before someone asks why I use not only intelligent forms for buttons - they aren't tabbable and don't meet my needs.

  

• How to control the rendering of the tab character in a TXT file?

  When I browse a TXT file, the tab character is rendered in order to look a lot like 8 places. Is there a way to control the apparent number of spaces in the rendering? Yes, I know that things like

                 pre { tab-size: 4 }
  

  in CSS3 could control this number in the rendering of HTML elements, but I want a control similar to a TXT file.

  Or if you want to use CSS, this bookmarklet will insert the style rule on the page:

  javascript:var r="pre{-moz-tab-size:4;}"; var s=document.createElement("style"); s.type="text/css"; s.appendChild(document.createTextNode(r)); document.body.appendChild(s); void 0;
  

  (Note that at least for now, you must prefix-moz - on the size of tabs in Firefox.)

• Position of the button close the tab tab

  Just updated to 17 of Firefox on my Windows 7 PC. The close tab buttons are now on the left side of the tab instead of the right side. How can I move them back on the right side? I can't find other help on this and tried to play with: config userchrome, but nothing is. I can change the color, add a button in the bar, but does not affect the positioning of the buttons close the tab on the tabs themselves.

  Help!

  You have the module / theme / userstyle installed that controls tab behavior? You can resolve this problem by restarting with disabled modules. You can also reset firefox who, most likely, your problem will be solved.

• Where the tab of group settings are stored under linux?

  I installed a new operating system Linux on my system and saved the folder .mozilla/firefox so I can retrieve it later I could lose all the settings.

  Now, I realized that I lost all my tabs group after reinstalling and thought that maybe I can get back them to my supported folder .mozilla.

  Anyone know where I can find the tabs in group settings in the .mozilla folder? (I don't want to copy the entire folder backup on my current folder)

  Thank you
  Claudiu

  (PIN) App tabs and groups of tabs (Panorama) are stored in session data in the sessionstore.js file in the Firefox profile folder.

  • http://KB.mozillazine.org/Session_Restore
  • http://KB.mozillazine.org/sessionstore.js
  • http://KB.mozillazine.org/Profile_folder_-_Firefox Firefox

• Add the tab character before the content of particular paragraph style

  I have to add the tab character before the content of particular paragraph style

  app.findTextPreferences.appliedParagraphStyle = app.activeDocument.paragraphStyles.item ("IDX2");

  list = app.activeDocument.findText ();

  // 2. For each found the point...

  for (i = 0; i < list.length; i ++)

  {

  App.Select (list [i])

  App.Selection[0].insertionPoints[0].contents="\t".

  }

  But the code above only works in the first instance. But I must add the tab character all the content of the paragraph applied

  How to do this

  Hello

  Another way without GREP...

  var doc = app.activeDocument;
  var myStories=doc.stories;
  var J= myStories.length;
  
  while( J-- ){
      var mStorie = myStories[J];
      var K= mStorie.paragraphs.length
      while( K-- ){
          if  (mStorie.paragraphs[K].appliedParagraphStyle.name == "toto") {
              mStorie.paragraphs[K].contents= "\t" + mStorie.paragraphs[K].contents;
          }
       }
  }
  

• Missing the "private browsing" button on the tab page there is no button "incognito" to the left of the button «+» iPhone 5, iOS 8.4, Firefox 1.2 (1206).

  Hello
  I have this problem since Firefox 1.1 for iOS. I've updated to version 1.2 (1206) but the problem persists.
  When I press the button "tabs count" on the upper right corner, the tabs preview screen with '+' button on the top right corner but THERE IS NOT button "incognito" on his left (it is only black box empty, do you need a screenshot?). Is this a bug or private browsing is not available yet for iOS?
  If the private browsing feature is implemented, how can I activate it?
  Thanks in advance!
  I hope that Firefox will become my favorite browser on iOS too! Keep up the good work!

  EDIT: misspelling.

  Hi spas123, thanks for your kind comments - as far as I know, the private in firefox navigation feature works only on devices with ios9...

• How to remove the tab bar groups new which is bite my tabs?

  Now using Firefox 10 Windows 7 and for the first time today there is a movement in the middle of my tabs right DARK blue bar, which is obstructing the tabs themselves. If I click on the arrow at the right edge, I see that it's a bar 'tab groups '. How can I remove it? I use groups of tabs, have no use for them and would rather be able to see the headers of text on the tabs I have open.

  THX,
  Mike.

  Restarted Firefox and he went. Nothing worse than an intermittent problem! If all goes well it doesn't happen.

  Mike.

• Grep to add the tab character after the first character?

  Hello

  GREP assistants are able to help with a question?

  I am trying to add a tab character after the first character in line in a paragraph style. So, for example, I would like to a tab after the I, D, O and N in the following poem...

  Can Wincy spider climbed up the spout
  Down came the rain and swept away the spider
  Is out the Sun and dried up all the rain
  Now can Wincy spider went up the spout again

  
  

  Thank you!

  To find

  ^ \w

  Implement

  $0\t

• DELL PE R710 missing sensors on the tab 'Hardware status' vCenter ESX after latest patch update!

  Last month, I update all my ESX host with the latest patches for ESX from 28/04/2011 (ESX410-201104001) via the vCenter Update Manager, earlier this month, accidentally, I have some verification to be done in the server room and noticed a hard drive failure on one of my DELL R710 Rack servers, I you connected the VirtualCenter client and when I click on the tab 'Hardware status' (where the alarms about the) Configuration hardware server usually appear), I noticed that my storage sensors are missing, the network sensors as well! ?? I recall that on March I did have another server hard disk failure, but I saw an alarm (for predictive failure) on my vCenter and I call Dell to replace the drive back!

  I also noticed that now the number of my server sensors are between 73 and 88, before I remember although there were a couple hudred of them! ??

  After some research on the net, I did I frimware/BIOS upgrade of all hardware on the servers, as I install OMSA 6.5 and Dell management plug-in to vCenter and all seems to work just fine, but storage sensors and count sensor under the tab 'Hardware status' issue was not resolved. I think there is a problem with vcenter, because when I connect directly to the host through the vsphere client, in the "State of health" tab all the material appears correctly. I found subjects with similar problems, but they have been with HP servers and not answered or solved!

  Is there anyone with similar problem or no answer to my question?

  Thanks to all in advance!

  godjak

  PSIF there need I can post some screenshots!

  Confirmed.  Without patch ESX410-201104401-SG, my other R710 has a full complement of sensors.

• Inactive button on the tab of the Panel

  Hi all
  
  I have a problem in the adf faces.
  I have two pages. On the first page, I have a button to display data in the second page.
  In the second page, I have two tabs, and there are buttons on each tab.
  If I click the button on the first page, I put the status of the inactive button on the second page = 'true '.
  It works well in the first tab, but when I click on the second tab, the state change, so the button is activated.
  What can I do then if I want to display the data, all my button at the same time my tab is disabled.
  
  Thank you.

  On your first page, you can have code for the button:
  **
  *
  * to = "#{pageFlowScope.showDisabled}" / > *.
  **

  When you click on the button above on the first page, a variable of pageFlowScope, showDisabled is set to true. You can use this variable on intellectual disability on the two buttons in the two tabs on the second page as #{pageFlowScope.showDisabled}.
  As this property is set to true, the buttons in both tabs will be disabled.
  It will be useful.

• Insert the tab character in a string

  I am trying to create a string that will be eventually written to a text file, which must be delimited by tabs. I can't figure out how to insert a tab character in the string. Here is an example:
  
  < cfset headerline 'H' & TAB = & #FORM.order_ID # >
  
  Obviously, "TAB" doesn't work here. Help?
  
  Michelle
  

  michellezee@Comcast. wrote:
  > I am trying to create a string that will be eventually written to a text file
  > who should be delimited by tabs. I can't understand how to insert a tab in the
  > string. Here is an example:
  >
  >
  >
  > Of course, "TAB" doesn't work here. Help?
  >
  > Michelle
  >
  >

  TAB = #chr (9).

  --

  Azadi Saryev
  SABAI - Dee.com
  http://www.SABAI-Dee.com

• Missing buttons from the bottom of the sidebar in Mail

  On my iMac, by post, the button "+" at the bottom of the sidebar (used to create new mailboxes) disappeared.  The other buttons (which I don't remember functions) there also are no longer present.  While I can always create a new mailbox by using the drop down menus, these buttons are a convenience I woud like to have back.

  So far, I tried to close/open the sidebar; Stop/Start Mail.  None of these actions corrected the problem.

  Any ideas on how to restore the buttons?  Thank you!

  The + button has been moved - to pause our cursor in high 'mailboxes.

  

• Excluding the links/buttons on the tab order

  Is it possible to remove items in the tab order of a form?

  I have a few articles that I can't tab in, including a few links. Hyperlinks are on another page of the PDF file from the editable fields, and I want the tab order to recycle the departure of fields, once left the last of them. I don't want to go to the page that includes the links if the user presses the tab key from the last field in the form; I'd rather switch to the first field.

  N ° the best you can do is use the setFocus method of field explicitly set the focus to a particular field. You can use it in the event on the blur of the field last on the first page.

• RE: Missing buttons when the publication to interactive PDF - possible bug?

  Hello

  Still having the following problem published last month - no matter who else has come across this:

  I am creating a 12 page PDF interactive with a set of 12 buttons (defined in the master page) at the bottom of page that relates to each page. When you click on the button you should directly to this page.

  I used this method several times before in CS5 to help get to destination in buttons and the definition of each page as a destination. It works fine normally.

  However, in CS6 once I have export as interactive and open PDF in Acrobat Pro buttons that everything seems to disappear once you click the button on the 3rd or 4th page.

  I stripped the indesign doc to include any other content - just the buttons, without effects of rollover etc, but I'm still having the same problem

  Please can someone help? I can provide the relevant and exported indesign doc PDF if this can help.

  UPDATE: A member of the forum tries to open it in Acrobat Reader instead and it worked fine. It's OK to a point, but I really need to open in Acrobat Pro.

  It is a known problem and should be fixed in the next point press.