Missing DAQmx

Hello

I'm new to DAQmx. I'm LabView 8.6. Miss me all the DAQmx components. Like, when I created new VI

Functions-> measure of e / s->...

There is nothing about DAQmx... I have not either the DAQmx examples...

C:/program files/develop instruments/labview 8.6/vi.lib. I couldn't find anything related to data acquisition either.

Should I update the driver for DAQmx? Where do I find it? How I could find out if and what DAQmx version had been installed? Thank you.

Oly,

The DAQmx 8.7.1 driver did not support for LabVIEW 8.6, I recommend you to download driver DAQmx 8.7.2 or later, we have 8.8 and 8.9 out as well. Here you will find the driver page: http://joule.ni.com/nidu/cds/fn/p/sb/navsRel/lang/en?q=daqmx&x=15&y=13

Tags: NI Software

Similar Questions

  • Driver or Toolbox component missing daqmx.rc

    I'm trying to open a VI works fine on another PC.  At the end of loading, pop ups window "Load and Save WARNING list":

    Type of warning - missing driver or component Toolbox

    Details - C:\Program NIUninstaller Instruments\LabVIEW 2011\vi.lib\DAQmx\create\channels.lib\DAQmx Create Channel (CO-Generation-the pulse frequency) .vi (DAQmx create channel (Co-generation - the pulse frequency) .vi) this VI is in need of a driver or Toolbox component which is not found.  Missing file of the resource 'daqmx.rc '.

    -----------

    The file daqmx.rc exists to

    C:\Program NIUninstaller Instruments\LabVIEW 2011\resource\objmgr

    I took the following measures:

    1. uninstall all previous versions of LabVIEW, LabVIEW 2011 to leave.

    2. has tried to run a repair on LabVIEW 2011 - who do not recognize the DVD provided by the plant as a source of distribution.

    3. uninstalled and reinstalled DAQmx 9.3.4

    No generation of pulses being applied anywhere in the VI of interest, can I safely ignore this warning?

    What, exactly, the warning means?  The mentioned file is, of course, where it should be.

    Any help would be appreciated.

    Hi mistercat,

    It seems that this is due to a problem during the installation (it may sometimes arise when things are not installed in the correct order). I would recommend uninstalling DAQmx and LabVIEW 2011, reinstall LabVIEW for your DVD distribution and then by installing latest DAQmx 9.4 (the latest version). I'm a little worried that the repair is not recognizing your factory DVD as a source of distribution... You have another computer to try to make sure that nothing has changed for the discs?

    Let me know if it helps.

    Best,

  • . Exe missing DAQmx subVIs

    Hi all

    I built an installer for my .exe. I have included:

    1 OR LabVIEW Run-Time Engine 2012 SP1

    2 NOR-DAQmx Base Runtime 9.6.2

    3 NOR-DAQmx Configuration MAX 9.6.2 Support

    The computer I did the VI is a Windows XP computer. The computer I want to run the installer is a freshly installed Windows 7 machine. When I try to run the installer, I get the following error:

    Missing Subvi DAQmx create Task.vi... lack of sub - VI DAQmx create channel (TEDS-A1-tension-Basic) .vi.... Missing Timing VI (sample clock)... Missing control task.VI... Missing clear task.VI... Task.VI stop missing... Lack of function external nilvaiu.*AQReadNChanNSamp1DWfm:C...

    Looks like I'm missing VI DAQmx, yet I've included DAQmx in installer.

    Thank you.

    I know this sounds like a stupid question, but have you run set - up.exe volume? You can open MAX on the target machine?  If Yes, what are the software components are listed?  Did restart you to complete the installation?

    My 8-Ball is screaming that this is a simple mistake that will involve a time .

  • x 64 DLL missing DAQmx

    Not sure if this is the right forum.

    The problem: I use Visual Studio 2015 with DAQmx in x 64 .NET project, but DAQmx version 15.1.1, 15.5 and 16.0 install only x 86 libraries .NET. I also tried installing Measurement Studio 2015, but not luck it no more.

    I tried the Googles and came up with a few ideas where the x 64 files should be located, but no one else having this problem. The x 64 files must be located in C:\Program NIUninstaller Instruments\MeasurementStudio\DotNET\Assemblies\Current. I have x 86 version in C:\Program Files (x 86) \National Instruments\MeasurementStudio\DotNET\Assemblies\Current and the program will run in x 64 tied to the x 86 library in debug mode. There are questions in release mode however.

    Any help?

    Google results:

    http://zone.NI.com/reference/en-XX/help/370473H-01/mstudiowebhelp/HTML/64bitdaqmx/

    http://digital.NI.com/public.nsf/allkb/52F5F5EF78AF084286256E0B007FE793

    http://zone.NI.com/reference/en-XX/help/370473H-01/mstudiowebhelp/HTML/64bitsupport/

    Hello

    When you go to C:\Program NIUninstaller Instruments, you have several folders of Measurement Studio with different versions of Visual Studio? I found the x 64 bit assembled under the MeasurementStudioVS2012 folder.

    I hope this helps!

  • How do you make thermocouples to read below-200 c? LabVIEW doesn't let me.

    I use the SCXI1102 thermocouple with the K type thermocouples.  This is an M series data acquisition card in a PXI chassis.  My problem is that I want to measure temperatures up to 35 K and LabVIEW won't let me.  When I try to set the value min minus-200 C, then I get the following error when I try to run my program:

    ... min temp falls outside the limits of polynomial precision scaling...

    ... define the scale of Thermocouple to Table Type property...

    How can I do this?  I'm more than willing to enter into the table of correspondence of the NIST values, but I don't know how.

    In addition, it does not when I try to use the Kelvin units.  But I don't mind everything by adding 273 to work around this problem.

    Hey, Astro.

    THE AI. Property ChanCal.ScaleType (Analog Input"General Properties" channel calibration' scale parameters' scale Type) differs from the AI. Thrmcpl.ScaleType Property (Analog Input"temperature" "scale of the Thermocouple Type).  THE AI. ChanCal.ScaleType property allows you to change the method that uses of the calibration scale, while I. Thrmcpl.ScaleType property allows you to change the method that uses the scale of thermocouple.

    If the AI. Thrmcpl.ScaleType is not in your list of properties, see this article in the knowledge base for more information about this missing DAQmx channel property.  After that you are able to locate this property DAQmx Channel, embed it in your code, as shown in the following screenshot:

    I would like to know if it works.  I hope that you are having a great day!

  • I can compile the project created in CVI2012 in CVI7?

    Hello

    I have the CVI2012 installed in a computer and I create a simple project to write a digital channel based on the example with DAQmx9.7. In another computer, it is installed CVI7 only, I think that the project includes the sources and headers (text files), I wonder if this project can be compiled in version as CVI7 or not? In the computer where CVI7 installed, I have install all runtimes of CVI2012 and DAQmx 9.7 drivers, but when I open the project in CVI7, it said missing DAQmx.h. So, how can I get these headers and get the project compiled in CVI7? Thank you.

    During the installation of DAQmx it should detect the presence of CVI7 and ask you to install support files.

    Have you checked the library menu? If DAQmx is dimmed, you need to select Customize and check the corresponding box in the new window: if it is checked, it means that the DAQmx support is not installed and you must re-run Setup.

    EDIT *.

    I now see in readme DAQmx 9.7 CVI7 in the file is not supported: you need to download a previous version of the driver that supports CVI7.

    NOR-DAQmx 8.8 seems to be the last usable version.

    If you need keep the active project for two CVI machines you will be limited to this version: This means that even when developing in the most recent one you must be sure not to use newer features of DAQmx.

  • Missing reference to task DAQmx

    Hello

    I have just inherited code without papers of an engineer who has left the company.

    We use a USB-6008 to control a stepper motor and take a few analog readings

    DAQmx tasks received really useful names such as "TO 0", guess that's Digital Out"0  However when I look at the tasks of the unit, "0" is not present. ""

    The program crashes and complains of an error.

    Is there something I'm missing here?  Y at - it another way that a string that "DO 0' culd be associated a task DAQmx?

    Rgds,

    Sean

    OK, I had a legacy project open.

    Virtual channels are in the new project.  I was looking everywhere on MAX, but it was in the project correct throughout.

  • Assistant DAQ missing even after installation of 14.0 DAQmx f1

    Hello

    I am currently using NI LabVIEW student 2015 Edition. I have an NI USB-6009 data acquisition card, and it came with a marked installation CD OR-DAQmx 14.0 f1. Then after you install the software from the CD, I was looking for the DAQ Assistant, but he is still missing. No action in terms of getting DAQ Assistant on my VI?

    Best regards,

    Benjamin

    Install the latest DAQmx driver for compatibility with LabVIEW 2015.

  • my channel DAQmx property node missing RTD?

    RTD may be available in the menu shown? I do not have a RTD hung right now; could be the problem? However, I don't have a thermistor or thermocouple and these options appear. I'm putting A, B, C, and R0 by program.

    Hi Greg,.

    By default, DAQmx filter properties that are not supported on the devices installed. So if your device does not support the RTD channels, then this is quite normal.

    However, one of your previous discussions spoke the USB-6009 case, so I tried with it. The 6009 supports channel RTD but the property for the 6009 filtering info missing properties of RTD, which is a bug. I dropped the CAR #295521 on this subject.

    The workaround is to set the property filtering node to "Show all attributes": lack of properties in the property DAQmx nodes

    Brad

  • DAQmx base missing tdms

    I have a vi (written in labview 8.6) that I am trying to run it on another pc; However, after you install the trial version on the other pc and daqmx base, I can't run it. The PDM vi is missing. They are not in the basic version of data acquisition?

    The ability to use DAQmx to log TDMS is limited to DAQmx and is not supported in DAQmx Base.  To use this feature, you need to use DAQmx.

    Kind regards

  • DaqMX Base read like waveform missing ability for Mac installation

    Now I have a VI running a signal with an average of program using tables as data types and the program takes up some memory, I was curious to try it by sampling the data as waveform as opposed to a table data types.

    The drop-down list of the DaqMXbase Read has no option of waveform and for some reason any 'DAQmx Read (analog 1 Wfm NChan NSamp d) .vi"is missing from the installation.  How to add this feature, or where I can find this specific file?

    Thank you.

    DAQmx DAQmx base drivers different and are, therefore, have different features. Since you are using Mac, you can use the DAQmx Base driver that has limited compared to the DAQmx features.

  • Recently upgraded to 7.1.1 to LV2009 and noticed LV 2009 is missing \vi.lib\DAQmx\!

    I recently updated from LV7.1.1 to LV2009 and noticed LV 2009 is missing \vi.lib\DAQmx\. I tried to copy my library DAQmx above LV7.1.1\vi.lib and did a massive compilation of this directory, but compiled files have a bunch of damn connector sinks showing as 'invalid '.

    Someone at - it suggestions how I can get a good library DAQmx in LV2009? LV2009 does not come with the support of DAQmx? !! ??

    After you install LabVIEW (any version), you must run the DAQmx Installer to install the support for it with LabVIEW. Even if you already installed DAQmx, you must always re - run the Setup program to install the LabVIEW support.

  • Have mutli worm of LV - 7.1 to LV10sp1 on XP PC. DAQmx - nilvaiu.dll missing when trying to open the CODE of WIN7 32 bit LV10?

    Have mutli worm of LV - 7.1 to LV10sp1 on XP PC.  DAQmx - nilvaiu.dll missing when trying to open the CODE of WIN7 32 bit LV10?

    Should which driver I?  VERSION please - DAQmx works fine in LV8.6.

    Hi Briana,

    I think I understand what you're asking, but what current DAQmx driver use you with LV 2010?  Only the 9.1.5 and above drivers are compatible with LV 2010, while many of the old drivers will still work for you in LV 8.6.  Below, I have linked an array of DAQmx driver compatibility and Labview versions.

    http://digital.NI.com/public.nsf/allkb/F4E76EC05118F72D8625773000672298

    Does that answer your question?

  • Problems with DAQmx - tasks missing when I run my application on another PC

    Hello

    I use a NI USB 6009 and my program use DAQmx and different tasks for the input and output signal.

    I created an application and I want to run this application on another PC, which doesn't have the development environment, but the runtime engine and installed MAX. This PC is connected to the NI USB 6009.

    Now, I have the problem that the tasks are missing on this PC and I get errors when I run the application.

    I wonder why these tasks are not put into the application automatically? What should I do now? Can I somehow export tasks in MAX and copy them to the other PC? Is not complicate it?

    Hi Johannes,

    Have you created your tasks of measurement and Automation Explorer?

    If this is the case, you must export the file of configuration of measurement and Automation Explorer and then import it on the other computer.

    With LabVIEW 2010, you can import a configuration via your Installer file, but I don't know if you can do it with LabVIEW 7.1

    Kind regards

  • 8.6.1 in lv 2009 update, missing lv vi, for the most part DAQmx errors

    I created an application with LV 8.6.1.   I have two 8.6.1. and lv 2009 on this computer.  When I click on the shortcut, lv 2009 automatically tries to load the application and gives me errors because it cannot find the sub live, for most of the screws of DAQmx.

    1 - is there a way I can get the shortcut to automatically load lv 8.6.1?

    2 are there in fact files I am missing that prevents the application from loading in LV 2009?

    I don't know what shortcut you are talking about. If it is a shortcut to the exe file, neither 8.6.1 or 2009 will begin. If you have a shortcut to a project or VI, then the version of LabVIEW that you last started will be charged. Just manually start 8.6.1, close it and next time 8.6.1 will begin.

    LabVIEW 2009 requires you to install DAQmx. You have a version compatible with your distribution of 2009. You can also download 8.9.5 or version 9.0.0.

Maybe you are looking for

  • Pavilion tx2000z clean install windows 7

    Hello I had just updated my Tablet PC from Vista Home Premium to Windows 7 Professional so I had to do a clean install. Everything else seems to be fine, but here are some things I'm having a hard time finding answers to: -l' screen will not auto rot

  • Satellite click on Mini - BIOS update keyboard extension fail

    Hi @all How can I do a bios update on the extension of keyboard? BIOS tablet is 1.70Keyboard BIOS is 1.50 When I run the update, the update say ' your Bios is up to date! Sorry for the bad English is not my native language Margolis

  • XP SP1 problems

    Just reload Xp on a Dell 2400 and can not load SP2. Any help

  • Failed to load the songs to USB

    Vista, windows media player 11 doesn't recognize a USB flash drive when I want to load MP3 songs on it to play on an MP3 player, when I insert the USB sync and click the drive nothing changes and the player continues to tell me to connect a device, I

  • Windows Server 2012 on PowerEdge 2800

    I have a PowerEdge 2800 with a PERC 4e/Di controller that I use as a computer lab.  It had Windows Server 2008 R2 installed (that is, x 64), and today I wiped and attempted to install Windows Server 2012 GTR.  Guess what?  There is no support drivers