Missing data of Lifelog - after changing phones
Hello
I just changed my cell phone from Z3 Xperia Xperia XY this week
and some of my Lifelog data are missing as shown below:-
Data of Xperia Z3
Xperia XZ data (new phone)
I also checked and may confirmed that two of my IDs are the same.
Please advise, thank you.
See you soon
Charles
I do not see the photos immediately, but it will take a few days so that it can synchronize all data.
Tags: Sony Software
Similar Questions
-
Missing data in XP after the transfer from one machine to another
3 xp machines do a restore destructive on a saved data machine xp in 2 files twice, the xp machine, the data are on slow so I put it in another to copy the disk after the machine notes that the data he copied only half and the other half is missing. I was single click copy right and whenever I do more data are missing? Idea of this itn was the first time I work with several types of OS but XP is the only one who did this is there a solution?
Hi HarrisonLane,
You can run a check disk on the hard drives & check if the problem persists.
How to perform disk error checking in Windows XP
It may be possible to recover the missing files by using data recovery software. There is no Microsoft recovery tool to recover the lost data. However, you can use your favorite search engine and download any third-party data recovery software.
Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Hope the helps of information.
Please post back and we do know. -
Data is erased after changing the CustomTopMember attribute for accounts
Hi all
We changed the Custom3TopMember attribute for some basic accounts and deployed the HFM application. After deployment, the existing data are get deleted for these accounts.
Please help me understand the reason and the solution to keep data.
Thank you
Alex Ditya
Hello
He is expected to not be able to see the values if you change the Custom3TopMember.
I suggest to undo the change, check if the data is still there, extract the data, change the data in order to include the new analysis and then reload the data.
Kind regards
Thanos
-
Historical data for missing Lifelog after resetting the software and restore
Hello
I used lifelog with sony account for one year. Two weeks ago, I sent my cell phone from Z3 to solve the problem of speaker. Before gaving the phone I save the data with the company Sony PC with all the options checked and reset the phone.
After the fixed number, I restored the phone. Now I tried to lifelog of logon with the account of sony, and he says no account found. I'm doing a loss all records in history.
I would like to have the records. Is it possible get it back my backup? I really hope I could have those back, would be very grateful for help.
hosais
You are probably using a different account, the data, it is stored with Sony servers, so even if the factory reset you phone or change phones, you can synchronize your data.
-
Re: Satelite C850-B516: copy data drive HARD recovery after changing the partitions
Hello
Forum need help once again
I split single partition came with my laptop to have data in a separate partition. I wasn't aware that it will affect. I have not created any backup CD. No, when I run HARD drive recovery media creator I get error "NO HDD Recovery Area.
I can see a healthy partition of 10 GB on my drive and disk partitioning tools are evidence of the data in it.
I copied to the Active primary partition of USB. But when I boot from USB, he leaves everything recover.
It comes
Can I recover my system to factory default using the recovery data copied?
Concerning
AhmedToshiba Satelite C850-B516
# Problem, it is that your recovery image is useless now. When you want to use the external device for installation of recovery image is must be created as device start and it can be done if you use the preinstalled recovery media creator.
Recovery image is saved on the HARD drive and fixed with the so-called markers. Recovery media creator can find these markers and start using the recovery saved on the HARD disk image. After changing structure of HARD disk partitions these markers disappeared and this is the reason why you see this error message.
I'm afraid you must order now new recovery m FRO Toshiba drive and you can do it on - https://backupmedia.toshiba.eu/landing.aspx
-
I am running XP Pro. What respect should be reinstalled from the CD. After the reinstallation, Harmon Kardon speakers do not work because HD ADECK cannot be properly installed. Kept on getting vital missing data?
Any suggestions? Someone else's experiences loss of sound after a re - install?
I guess you have formatted the HD?
Therefore, you need to reinstall the relevant software for HD ADECK
See here:
http://www.Google.fr/search?q=HD+ADECK&ie=UTF-8&OE=UTF-8&AQ=t&RLS=org.Mozilla: en - GB:official & client = firefox-a
Happy trawling,
Jerry -
missing data after upgrading to 1.3.5.1
I upgraded my Palm Pre webOS 1.3.5.1 and lost ALL my calendar events. My contacts are no longer happen when I try to create a new text message. I can not also view contacts or pull them up by typing the name of the contact, when I want to make a call.
Am I missing something? How to bring back that info? How can I synchronize my contacts with the text and calling applications?
It's pretty frustrating...
Looks like something is still wrong with your data, even if she came back.
It takes a lot of potential try this and then do what's a lot to try on a forum. I suggest you to contact technical support to see if they can help to recover the data.
Technical support phone number is 877-426-3777, once the data cable it should also focus on your other post on the contact data do not stay up long enough for you to add the information in.
-
The JPA entities do not refresh after change data backend.
Every day work of oracle changes the database. After change in my application's database shows no modified data because the JPA entities are given in the cache.
Please let me know how to update entities programmatically to meet the needs of users. Application is in production and need immediate solution.See,
http://wiki.Eclipse.org/EclipseLink/examples/JPA/caching
As for having the database triggers the cache to refresh, it is more difficult and will affect the performance of your database.
There is a how-to document that gives an example of this using Oracle AQ and triggers.
See,
http://www.Oracle.com/technology/products/IAS/TopLink/technical/tips/DbChangeNotification/index.htm---
James: http://www.eclipselink.org -
Missing data calendar after MS update
This morning, I went to check my calendar in the Palm Desktop 6.2.2 and almost everything was missing. Apparently, an update of MS ran all night.
In my Palm OS Desktop/username/calendar folder, I see a big (1408KO) file called datebook.bak and another called DateBook.mdb.bak (1464 KB) one who would contain my missing data?
My last Coop diary is dated 10/08/09 and I wouldn't lose all my data from this date.
Unfortunately, the restoration of data from my Palm TX is not an option.
I am running Vista as the underlying operating system.
Any ideas on the recovery of my lost calendar are appreciated.
Hello
The DateBook.mdb.bak file that you found contain your appointments before last successful hotsync. It would be important that hotsync not you your PDA or the bak file would have overwritten with the contents of the Agenda you see in Palm Desktop right now.
I suggest that you undergo these:
- Create a new user name in Palm Desktop.
- While in the module calendar in the new user name, click file > import.
- Navigate to the location of the bak file.
- Type * (asterisk) in the 'filename' box and press ENTER. This should indicate the contents of the directory that the bak file.
- Now, double-click the bak said to import it.
- If you're lucky, you should see your lost appointments.
If you're unlucky ignore the following steps:
- Now, are you sure that the bak file really contains your lost diary, near Palm Desktop.
- Using windows Explorer, navigate to your username folder. Usually, it's \Documents\Palm OS Desktop\ [a derivative of your hotsync username]
- Rename the folder "Calendar" to something else.
- Open Palm Desktop and be in your correct username and in the calendar module name.
- Now you can import the bak file in the folder of the Agenda that had renamed you in step 3.
- Now you can hotsync TX, but remember that the conduct of the Agenda is set to DESKTOP REPLACED the HANDHELD computer.
Message edited by wacre on 10/16/2009 06:35 -
Point cloud with missing data and 3 sets of data
Hello
I'm doing a scatter diagram that has 3 sets of data in it (i.e. 3 plots on the same graph), except that 2 of my sets of data have a missing value while my third set has all the values. I end up getting 2 lines that are disconnected. I can't just remove the line containing the missing data for the 2 sets of data because since my category axis is time, my data points get shifted and no longer appear at the right time. This is the chart that I have.
Thank you.
Hi Gabrielle,.
If there is a diagram of dispersion, the x axis is a value axis. If you have auto selected for the min and max values on this axis, the scale may change when you remove the data point, 15, 85, but the rest remains in the same position relative to the values on each axis of ordinates. What change will be , however, is the curve on which 15 85 approached a local y maximum.
Scatterplots will always leave a gap in the line/curve of connection where there are a pair of missing data. There are two ways to close the gap.
If the chart is an essentially linear relationship, you can use a calculated value is pair up with the lack of value x. The downside of this is that the representation of this point will be indistinguishable on the map of the other data points, measured.
A better way would be to make two tables, one with the full data set, the other with the partial sets, but with the pair missing completely removed.
Adjust the cards the same size and have the same scales on each axis, then just remove one of the cards except the data points, the curves connecting the data points, the x axis of ordinates and the legend showing the color and the forms used to plot each series.
Give a graphic a transparent filling and place it in front of the other.
Kind regards
Barry
-
HARD does not work after changing the disk partitions recovery media creator
Hello world
After installing windoows 8.1 April major upgrade (win 8.1 presents as OEM), and have shrunk C partition to create a data partition "D", "Troubleshooting" option under advanced start menu is no longer available.
Toshiba Recovery Media Creator does not work, too (it can not find any hard disk recovery partion).
I got in the OEM recovery partition.
I am also able to create a recovery using the Windows tool unit.
You have no idea about it?Thank you very much!
Hello
Sorry to hear about all this. Unfortunately, you now have a big problem. I don't understand why you didn't create support of recovery before you started to change the factory settings, including to change the structure of the partitions of HARD drive.
Mobile offered with factory settings a structure specific partitions and recovery recorded image is saved on the partition of drive specific and marked with invisible markers. These markers are visible for preinstalled Toshiba recovery media creator tool and when you start the tool can find points of reference and has full access to specific files.
Unfortunately, after changing the original scores structure Toshiba tool cannot find these markers more and is not able to copy files from recovery media recovery. What you need now is the original recovery disk. Using this disk, you can install original recovery image and after doing this, you will have new factory settings.
I know it sounds stupid now but you must order the original recovery disk and it can be done on https://backupmedia.toshiba.eu/landing.aspx
If you have any other questions you are welcome.
-
How to change phone number in the settings?
I'using iphone 5S for a few days. I put the incorrect installation of bij number. So my contacts do not see my number of wright, is also a problem by text message. I gave the number of wright in wapp, so it's no problem.
How to solve this problem? I tried to change phone settings again and again, put the wrong number comes back after a few seconds.
What should do?
Thanks in advance!
Hello
Go to settings until the second phone especially messages icon
Top of page my number enter correct number.
See you soon
Brian
-
variable sharing, missing data, the timestamp even for two consecutively given
Hello
I have a problem with missing data when I read a published network shared variable.
Host VI:
In a host of VI on my laptop (HP with Windows XP Prof.) I write data to the shared Variable 'data '. Between two consecutively write operations is a minimum milliseconds of wait time. I use it because I want to make sure that the time stamp of each new value of data is different then a preview (variables shared the resolution is 1 ms)
VI target:
the VI target cRIO-9012 bed only of new data in the way that it compares the timestamp of a new value with the time stamp of the last value on a device in real time.
Problem:
rarely, I'm missing a data point (sometimes everything works fine for several hours, transfer thousands of data correctly above all of a sudden failure occurs). With a workaround, I'm able to catch the missing data. I discovered that the missing data have the timestamp exactly the same, then the last point of data read, is so ignored in my data 'legal '.
To summarize, the missed value is written to the variable shared host, but ignores the target because its timestamp is wrong, respectively the same as the last value, despite the host waits for a minimum of 10 milliseconds each time before writing a new value.
Note:
The shared Variable is hosted on the laptop and configured using buffering.
The example is simple only to display the function of principle, in real time, I also use a handshake and I guarantee that there is no sub - positive and negative.
Simplified example:
Question:
Anyone has an idea why two consecutively data can have the same timestamp?
Where timestamping (evil) Finally comes (System?)?
What would be a possible solution (for the moment with shared Variables)?
-> I tried to work around the problem with the clusters where each data gets a unique ID. It works but it is slower that comparing the timestamps and I could get performance problems.
It would change anything when I animate the shared on the RT System Variable?
Thanks for your help
Concerning
Reto
This problem has been resolved in LabVIEW 2010. You can see other bugs corrections in theReadme of LabVIEW 2010.
-
After changing the motherboard on my PC, a Dell Optiplex gx270s Windows XP SP3, the computer (which also works fine) does not see the CD/DVD or floppy drives CD, DVD or floppy is inserted. (He sees not thumb drives). When I look under the hardware in the system, the floppy drive and the Cd-Rom are marked as +. All appropriate updates had been installed. These discs worked fine before the motherboard was changed. (It was done because the capacitors were bulging.)
What could be the problem and how to fix it?
Please explain simply, that I'm not a computer expert.
Thank you in advance.
Hi 4Sunnydays,
Welcome to the Microsoft community. According to the description of the problem, CD/DVD and floppy drive is missing.
· You get the error message?
I suggest you to follow the steps in the article and check.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756
I hope this helps. Let us know if you need more assistance.
Thank you.
-
Original title: replacement hard drive configuration issue
My hard drive crashed and I can't access anything anyone on this subject. I have a second hard drive that was used for additional storage only. I'm doing this second walk my master drive. After changing the cables, jumpers, the bios settings to show as the master I am using the Windows XP disk, I try to put in place. I get an error message that says: I need a full version disc windows genuine, not a disc to upgrade to. When I bought the computer it came with Windows ME preinstalled and there was no disk that came with the machine. When I went to XP apparently, I bought a version upgrade, not the full version. Is it possible to get a cd of microsoft, or download a file, which can help get this another hard drive mounting correctly?
Thank you
Jeff
Hello
Since you have changed your HDD, I would contact the Microsoft product activation center to get on your version of the operating system. Visit the link that provides the phone number of the same below:
http://support.Microsoft.com/kb/950929
See also: http://support.microsoft.com/kb/811224
Maybe you are looking for
-
When I post a question how can I find the answer?
When I open the communities page where my list of questions is housed? Is it under people search publication content? I never find answers that I get if I open the email I'm sent. Thank you.
-
I managed to establish a TCP/IP connection in client/server application between two machines on the same subnet, thanks especially to Mark Yedinak here on the forum. However, I would like my request to be able to establish a TCP/IP connection via int
-
In XP, how to lock icons in folders so that they don't get mixed with each opening. I have subfolders in alphabetical order and you want to keep it this way.
-
WUAUSERV takes up 50% of my CPU all the time
Separated from this thread. I have the same problem as the OP, I ran track for 60 seconds during high cpu/memory/fan use and in the end, I stopped wuauserv to show the normal state of my pc. Then saved... Here is a link to the newspapers https://driv
-
2 wireless automatic duplex printing does not work.
I can't Auto 2 wireless faces seem to work on my OfficeJet J6480. It connects and I can easily print but 2 sides printing\g works that manually. It is a Windows 7 Home Premium 64 bit laptop and a standard computer also has the same problem... 2 au