Missing development mode
I have 2 OS. Development mode is missing from my settings option. So I can't connect to Eclips. How to get the development option in the settings. Help, please.
It should be under settings > Security.
Tags: BlackBerry Developers
Similar Questions
-
presets are missing in develop mode, they are on the pc in lightroom help file please
consider neil
Hi Neil,
Right-click on the user presets in the Panel of Presets in develop module, and then choose Import > navigate to the location where are stored the your presets > select the .lrtemplate files to import.
Kind regards
Claes
-
Lightroom develop Mode images are missing
Help please. I have imported just a few photos in Lightroom, when developing mode, I can see the photos, but he says photo is missing, and they appear very pixelated, but well behind closed doors, do not know what to do
Hi Jana,
Please see the following article to locate the missing images in Lightroom: Adobe Lightroom - find folders and files moved or missing
Let me know if it helps.
Kind regards
Tanuj
-
Brightness and filling of adjustments absend develop mode
Recently updated to LR 5 - when in develop mode - am is more presented with the selections light and filling. Am I missing something or there at - it a configuration change, what can I do?
The new controls to take some getting used to, to be sure.
-
Turn on developer mode in ipad
How to enable developer mode in ipad. I am a developer, I need to test apps I wrote in xcode need help
Hello theKelvs,
What have you tried so far? I think that you just plug in your device and run.
-
Chromebox: developer mode chromebox
I recently bought a HP chromebox to use a kiosk application. However, to completely install the kiosk application in the way I need to, I need to switch to developer mode. In accordance with the instructions that I have to
To call the developer/restore mode, you insert a paperclip and press the RESET BUTTON (just beside the kensington lock) and press the power button. Release the RESET BUTTON after a second.
Mode Dev first call you the recovery and to the recovery screen, press Ctrl-D (there is no prompt - must be made). It will ask you to confirm by pressing the reset BUTTON again.
Dev-mode works as always: it will show the scary start screen and press Ctrl-D or wait 30 seconds for initialization.
However, when I do this the box does not send any video signal to my HDMI screen so I am completely in the dark as to what is happening, if anything. I tried with a wired USB keyboard and a USB wireless keyboard, same result: nothing seems to happen.
Who has an idea to switch to developer mode on thisHP chromebox? (Not a chromebook)
Hi @StephanvR,
Steps performed by you to switch to Dev Mode seems to be OK.
As you mentioned that you have connected the display via HDMI and there is no display.
Therefore, you can try to connect to display Port (DP) and check if there are any screen.
I hope that answers your question.
I am an employee of HP, the views expressed here are my personal opinions, not HP.
Make it easier for others to find solutions, marking my answer "Accept as Solution" if it solves your problem.
Click the "Thumbs up" button to the left side of my post to recognize the message *.
-
Not able to run standalone LabVIEW RT application cRIO (works well in development mode)
Strange question.
I'm trying to deploy an application of RT to a controller for cRIO-9074. I developed the application in development mode and everything works and seems to be being debugged. However, when I try to build and to deploy the application as the startup, the application seems to start running, then stop cold (based on the CPU usage as described in the Distribution System Manager OR). At this point, I can't debug because the application is stopped (no updated variable).
The problem seems to be related to the NI_AALPro.lvlib library, because if I turn off the function polynomial evaluation, the code will compile and start fine. I'm tempted to recreate the necessary functions and create my own library, but I prefer to find the problem and fix it rather than re-create the wheel...
Is it possible that the library badly uploaded to the controller? If so, is it possible to force the appropriate library to be transferred to the controller?
Thanks for any help.
Toader,
Thanks for the reply.
I think I solved the problem. For some strange reason, the functions inside the NI_AALPro.lvlib were not available on the cRIO at run time when the application tried to run in stand-alone mode. I ended up adding the library to the section to always include the source files tab in build specification and the program runs now. I'm not sure what it is, but it works.
Thank you Morgan of NOR.
Kind regards
Big Ev
-
When setting in development mode Simulator a screen showing an IP address where the two first two tokens are attached to the 169.254 and there are som of choice for the next two chips. This IP address does not appear to be a report any with the IP address of the device. His IP address is 192.168.56.129. And nothing to do with my IP of the computer that is 192.168.10.54
What it is? This who should I put it?
The 169.254 is for the USB interface, but you can set one or the other as the debug ip in the properties of the device. I have the two together in mine and just add a suffix USB and WiFi in the name so I know which interface to connect to. Its useful for when you don't have a wifi network to connect to.
-
Z10 blackBerry development mode
Hello!
When I go into Settings/Security/Development mode, I can:
- activate this,
- specify an IP address for the development,
- install a token "debug".
(if I translate well to the french).
Could someone tell me more about these options?
Is there a security problem if I try and install the debugging token?
The token lets connect you the phone via ssh (among a few other things.) You don't always have root access on the same phone with installed.
With mode on you can sideload apps debugging, but they must always be signed (by someone with a BlackBerry Developer certificate, which could be you.) Without development mode on the phone will not allow direct loading of applications via the interface USB at all.
For purposes of sldeloading, there is no need to install the debugging token.
-
BlackBerry 10 password remove for development mode
Is it possible to be in development mode and have not created a password? Z10 is my primary phone, and it annoys me that I have the password on every time I'm in development mode. I'll be in dev without password mode? It would be a little easier my life
Hello BojanKogoj,
Thank you for your question. There is unfortunately no way to support to have your device in development mode without having a defined password.
Let us know if you have any other questions.
-
Hi all
I'm creating a Maunal search page.
To do this, I created a view based on a custom display object.
Page contains 2 parameters.
If I give all settings and click the OK button.
It gives the following error.
Developer Mode error: outdated data
This page contains outdated information. This error could have been caused by the use of the buttons of the browser (the browser back button, for example). If the browser navigation buttons were not used, this error may result from coding errors in the application code. Please check press the back button on the browser developer guide - view primary key object comparison section to review the main cause of this error and correct the mistakes of coding.
Cause:
The view BLTrinDisplayAM.ViewVO1 object did not contain any record. The records displayed may have been deleted, or the current record of the view object is not properly initialized.To visit, please click on the Home link at the top of the application page to return to the main menu. Next, go to this page using the app's navigation controls (menu, links and so on) rather than use the controls of the browser as rear or front.
If I don't give any parameter and click go Button.The content of the view are displayed.
So if I pass all parameters and click Go, then the corresponding record is displayed.
Why, for the first time, if I give the parameter and click Go, obsolete data error is coming?
Please help me.
Grateful for your help!
-Aren
You use the object of the view for the search criteria and search results fields.
I suggest you to remove references of VO fields of search criteria, item1 and item2.
And in the event of the button 'Go' in the processFormRequest, get the criteria for field values entered by the user as below and run the object (ViewVO1) of the view by using these values.
String buCode = pageContext.getParameter ("item1");
String lsiCode = pageContext.getParameter ("item2");
Thank you
-
Twisted colors in Lightroom development mode
When I want to develop my photos in Lightroom develop mode of that all the colors in the image are bent upward. See the screen capture below:
I struggled a while to figure what's wrong without success.
Those who know how to solve this problem?
Is this LR 6 / CC 2015?
Disable the GPU acceleration: Adobe Lightroom GPU troubleshooting and FAQ
-
My pictures as soon as I switch to 'develop' mode completely to chance
I'm fairly new to Lightroom and I would love to work with her, but I have no idea of what is happening to my photos. I've seen a lot of tutorials and find out how to import a picture and what I can do with the mode of development. But as soon as I import one of my photos (JPEG format) and go to "develop" - mode, my picture is kind of screwed upward and I don't know what to do. I tried it with pictures of external hard drives, as well as with the photos on my laptop. Also, I closed and restarted my laptop, but it's always the same.
It's the photo I just imported into Lightroom. So far, everything looks good. But as soon as I push the button "develop" in this case: "."
Why my picture than elsewhere when I try to change it and how can it change so that I can actually see my photos with the original colors?
I hope I can find someone who can help me. Thank you very much!
Looks like a problem with the communication of hardware acceleration with your video card.
menu / Edition / Preferences / performance
Uncheck the box "use the graphics processor.
-
Adobe Lightroom develop Mode question
The guys, please someone can help me get rid of this problem? Once I open the image in develop mode it is is messed up with this effect and I do not know where to go this coming end.
Go to Preferences, click the performance tab, and then clear the check box
-
Contacting palm to see if palm pre developer mode to the guarantee
Have an e-mail address for palm to contact them. I really don't want to pay this question and I found a chat irc for palm room, but no one is, never. I looked up and down but still nothing.
It does not void the warranty. I have my pre in this mode as well. Basically make it so you can install beta apps that you create or if you test a developer it allows to install it and test it.
Also if you do a partial erase on the device it removes it developer mode if this is the cause of any technical problems you may have with the device. More so, just like you got the unit out of the box.
Maybe you are looking for
-
Equim A60 unable to use TV USB 2 card
HelloI bought a new equim A60 with the following specifications:Processor speed: 2.8 GHZRAM: 512 MBHard drive: 40 GBI tried to use the MSI VOX TV USB2 card and Terratec TV card on the laptop, but all do not work with my laptop even though he has work
-
The mac USB external hard drive is compatible?
is mac drive external hard usb compatible, if yes, how can I reformat it to make it work.
-
Switch Audio device without rebooting between computer and TV.
Switch Audio device without rebooting Hello I have a HD TV hooked like a monitor to my desktop via a HDMI cable to a HD video card. The video works wonderfully, but for some reason, the sound goes is more easily. I used to be able to simply change th
-
XP starts the sequence but stops at a black screen before the end of startup.
When I start my PC's of tracks through the boot sequence but evaporate hangs on a white, black screen. Then I plant sequence and re-boot into Safe Mode. I tried to restore to a previous point, but have always had the same problem. The company I bough
-
message usb device not recognized guard appearing, none of our devices work
None of our usb ports work so that we cannot use the printer, mouse, or plug in our camera we get the message this device is not recognized. We have a laptop