Missing dll file USBSTOR.sys ksuser.dll

Similar Questions

• Need to file "serscan.sys' windows 7

  I have a laptop HP with windows 7. I just got a HP deskjet and tried to connect wireless with it, but I'm missing the file "serscan.sys. Where can I find this file to resolve the issue or there at - he more recent files which replaces this one?

  Try this solution:
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c01750112>

  SC Tom

• Satellite Pro L300 - missing dll. files after the installation of the printer

  Hello

  I have missing dll. files on my Pro L300.
  When I try to install my printer software it throws an error message upward.
  I now have the missing dll. files, but can't seem to install them. Someone knows what to do with them?

  I am running XP and the files are sccbase.dll slbcsp.dll

  I have listed this question before, but it has never been on the forum?

  Thank you very much

  Q

  Hello

  I searched and slbcsp.dll sccbase.dll and found someone who had the same problem after installation of the printer software.
  Check out this site:
  http://forums.CNET.com/5208-6142_102-0.html?ThreadId=275051

  Please post some feedback after you try the workaround solution posted here.
  It looks like a registry key must be changed.

  Good luck

• Missing DLL files while trying to load a game

  Original title: missing DLL

  I bought a game for my daughter who said it is compatible to Windows XP. However, when I try to charge it I am constantly be bombarded with messages stating that files such as Wing32.dll, wing de.dll and wingdib.drv cannot be opened. These files are not on my windows system file so do I need to do to make this game run?

  Hello

  1. what game are you talking about?
  2 have you connected to the administrator account?

  Do the following and see if they help.

  Step 1:

  Unregister and then reregister the Windows Installer Service.

  a. Click Start > run, type msiexec /unreg and click OK.
   
  b. Click Start > run and type msiexec/regserver, click OK.

  Step 2:

  Make SFC scan and check if the problem persists.

  Step 3:

  You can also follow the steps listed in this article.

  http://support.Microsoft.com/kb/822798

• Outlook Express does not open. MSOE file error message. Missing DLL files

  Hello

  I am unable to open Outlook Express.

  I get the following error message.

  Impossible to open. MSOE. DLL missing. I'm on my

  ary address right now. Please send all messages from * address email is removed from the privacy *

  I changed my

  default email to * address email is removed from the privacy * to

  
  I am unable to open Outlook Express I get the following

  error message.  Cannot open the file MSOE. Missing DLL.

  Right now I use my secondary address. :

  E-mail removed for the protection of personal information

  Please NOTE: I have now a new primary e-mail address is. :

  E-mail address is removed from the privacy *.  I added the number one (1) after the letter

  s. Please send all responses to

  E-mail address is removed from the privacy *.

  ONE) after Linda s number of the letter.  It has been * address email is removed from the privacy *

  hope someone can help me fix this problem.

  Folders.dbx is probably damaged.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the Folders.dbx file and delete it.  Another will be created automatically when you open OE.

  Note these possible side effects:

  When you re - start OE, it will build a new index of all *.dbx files it can read and create a new Folders.dbx. Please understand that you will lose the mail directory structure, and message rules will probably have to be edited.

• Missing DLL files. Windows Update does not work. Manufacturing installation of Xp home Sp3.

  I inherited my parents (RIP) PC. It is a Windows Xp home service pack 3 installation manufacture. I'm NOT have a disk to reinstall. There are problems in the registry and the missing DLL files. I can't update windows to work. The downloads will not be installed.

  I was told "running" sfc/scannow and rather than put it on Cd to type the path to the files (C:/windows/I386)... I tried... But he asked the CD and will not let me choose a path.

  So... How can I reapir my Xp home without the disc?

  On Monday, December 6, 2010 20:55:18 + 0000, janiflower wrote:
   
  > I inherited from my parents (RIP) PC. It is a Windows Xp home service pack 3 installation manufacture. I don't have a disc of resettlement. There are problems in the registry and the missing DLL files. I can't update windows to work. The downloads will not be installed.
  >
  > I was told 'run' sfc/scannow and rather than put it on Cd to type the path to the files (C:/windows/I386)... I tried... But he asked the CD and will not let me choose a path.
  >
  > Then... How can I reapir my Xp home without the disc?
   
   
   
  If I bought a used computer, no matter who previously owned the
  first thing I could do with it would be to reinstall the operating
  system itself. You don't know how the computer has been maintained,
  which has been improperly installed, what's missing, what virus and
  There may be spyware, etc. I would not live with someone
  other errors and problems, possibility of kiddy p0rn, etc. and I
  would not recommend anyone else to do.
   
  If you reinstall Windows properly, you are playing with fire.
   

  Ken Blake, Microsoft MVP

• Install service pack 3 Windows xp pro takes care of the missing DLLs needed for kernels. the mine antivirus program deleted some critical files

  from the start, windows fails to launch and a message of error due to the missing dll files is displayed

  If Windows does not start, you can not install Service Pack 3. And no, it is unlikely that your computer could get repaired by doing so, even if you were able to try. Try a repair rather installation:

  http://www.michaelstevenstech.com/XPrepairinstall.htm - repair install how-to MS - MVP - Elephant Boy computers - Don ' t Panic!

• Missing DLL. Hlink file and code error 80040609?

  My PC says I'm missing a dll. Hlink. He says that if I reinstall the program, it should be repaired. I bought my PC from Office Max.  How can I get a hard copy of MS to reinstall? In addition, I can't update my system because of the error code 80040609.  How can I solve this problem? These problems are the cause of pc problems slow and bad functioning. Any help with this urgent matter is appreciated.

  Hello

  1. are you unable to install windows updates?
  2. when exactly you get the missing dll error?

  Follow these steps and check if this solves the problem.

  
  Step 1: scan Run SFC (System File Checker).

  Scan SFC will Windows replace corrupted or missing system files on your computer.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  b. click on continue or provide administrator credentials if prompted.
  c. in the type in the following command prompt window and press ENTER:
  sfc/scannow

  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833

  
  Step 2: reset Windows Update components.

  Follow the steps in the article below.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  NOTE: To contact the computer manufacturer to a recovery disk that you can use to restore your system during system failures.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• On my Satellite Z830 missing dll file

  Hello

  I have a Z830 and I'm really happy with it. But I have a little message DLL missing after startup.
  It is said: "* there was a problem starting msixvq32.dll the specified module could not be found."

  My question is, where can I find that missing DLL? I know how to disable the alert with msconfig, but I does not solve the problem, it just hides...

  Thanks for your help

  see you soon

  Since when this message at startup?
  Have you done all that can be responsible for this?
  Can you identify which module is this dl issue?

• Missing DLL file keeps Getting Past journal. How can I restore file?

  After trying in vain to my Dell Dimension 4550 under Windows XP SP3 with Dell Studio XPS running Windows7 HomePrem network, I downloaded a file recommended by Microsoft which would "solve" the problem. At the beginning I was unable to execute the file downloaded and kept receiving the message «you don't have permission to update Windows XP.» Please contact your system administrator. "Unfortunately, I am the administrator: o (...) After correcting the problem of 'permission', I tried once more to run the fix MS (WindowsXP-KB922120-v5 - x 86 - ENU.exe). The error message following, that I received was missing "Systems32\rundll32.exe". I tried to re - start the system with the disk OS (even changed the configuration of the system so that the CD player is the only boot drive. No go. Finally, the system charged up to the Welcome screen with my username (which is the ONLY user name and no password). When I clicked on the icon for my use, the office briefly appeared, then returns to the Welcome screen with my name of user/icon. The only other available command turns off the system.

  Since I have no way to load the missing/s file to the computer (or I'm not aware of the procedure), can someone please help me with this problem.

  Hello and welcome on Microsoft Answers. First of all, I think that your computer may be infected with malware. Rundll32 is a windows core system file required to run applications, but is not necessary for windows startup and so shouldn't stop your desktop computer to load.  I recommend that you restart your computer in safe mode with network. When you are prompted to choose an account to connect to choose your personal account. Download, update and perform a quick scan with Malwarebytes. Display the results of the analysis, and we'll go from there.

  How to start in safe mode

  Malwarebytes.org

  How to use Malwarebytes

• missing DLL

  Firefox only has no automatic update repeatedly. Finally decided to uninstall and do a clean reinstall. Installation download opens and then closes and goes no further. Downloaded the IE Setup file and tried again. Same result. Decided to try Safari. Same model. Installation file opens the farm and no further action not accept Safari popup message says "Missing DLL", but it does not say what DLL. I have no idea how to solve this problem. Miss my Firefox. Help!

  These problems can be caused by security software.

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test to see if that helps.

  Do a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 21.0.x: http://www.mozilla.org/en-US/firefox/all.html

  Uninstall your current version of Firefox, if possible, the settings in the software security and cleaning of the Windows registry.

  • Do NOT remove the data personal when you uninstall your current version of Firefox, because all profile files will be deleted and you will lose all personal data such as bookmarks and passwords from other versions of Firefox profiles.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but make sure that 'delete personal data' is NOT selected when you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• DetermineReportFilePathNameExpr missing dll Testand 2014 SP1

  In my sequence of process template is only a call to DetermineReportFilePathNameExpr in content modelsupport2.dll. (Teststand 2014 64 bit) This call makes the Teststand sequence editor stop working. I guess (?) that the reason Miss dll as follows

  My system

  • Windows 7 64 bit
  
  
  • Testand 2014 SP1 (14.0.1.103) 64-bit
  
  
  • Version 14.0.1.103 sequence editor

  In the analysis of Dependency Walker modelsupport2.dll , used in the DetermineReportFilePathNameExpr call, I see the following dll lack on my system:

  • API-MS-WIN-APPMODEL-RUNTIME-L1-1-0. DLL
  
  
  • API-MS-WIN-CORE-WINRT-ERROR-L1-1-0. DLL
  
  
  • API-MS-WIN-CORE-WINRT-L1-1-0. DLL
  
  
  • API-MS-WIN-CORE-WINRT-ROBUFFER-L1-1-0. DLL
  
  
  • API-MS-WIN-CORE-WINRT-STRING-L1-1-0. DLL
  
  
  • API-MS-WIN-SHCORE-SCALING-L1-1-1. DLL
  
  
  • DCOMP. DLL
  
  
  • IESHIMS. DLL

  How can I get these DLLs?

  Best regards

  Hey Rainman.

  TestStand comes with the source code of modelsupport2.dll. It is located in the directory of TestStand components:

  32-bit: C:\Program Files (x 86) \National Instruments\TestStand 2014\Components\Models\TestStandModels\modelsupport2

  64-bit: C:\Program Files \National Instruments\TestStand 2014\Components\Models\TestStandModels\modelsupport2

  You can compile it if you have the CVI on the system. Otherwise, you can at the very least still look .c files and see what is happening in the code.

  For this particular function, it seems that we have changed it over the years. The new version of the function is DetermineReportFilePathNameExprEx2 and has more than two parameters: processModelClientPath and uutPartNum. If you create a new model of process from scratch, it's the call, so you must use your process template is more stretch if you decide you need this information.

  Try the DetermineReportFilePathNameExprEx2 and switch the values for processModelClientPath and uutPartNum. If it still causes TestStand hang, then I would recommend building a debug DLL to see the line of code where this occur.

  Edit: Also try passing an empty string or a value ' " for uutStatus. Nothing can be a problem. I do not expect to be a problem because TestStand converts this value to a point of value Null of appropriate architecture, but it should be test.

  Thank you

  -KP

• . Missing DLL? (nilvaiu.dll).. .when an installer of construction in 2009.

  OK, what we have here is a little grope in the dark... I have not built an executable/installer because I was working with LV8.6, so please bear with me here... before any such request, yes I find!

  Here's my process at this stage...

  I have a VI that works the way you want.  I want to make cela a stand-alone executable that I can run on a different computer to manage some controls.

  I have the runtime of LV 2009 installed on such computer.

  I then open my VI, yet once make sure it works as you wish and add a new project.

  This VI is added to the project.

  I now have the open Project Explorer and select Build specifications and select New/Application (EXE)

  On the following tabs, I get the following...

  Information... No action taken

  Source files... I select the VI and add it to the startup list screws

  Destinations... No action taken

  The source file settings... No action taken

  .. .and essentially leave everything to their default values.

  Generation hit and he built "My application", which is added under the specifications to build file.

  I took that target the folder containing the executable file included and tried to run it on my computer and it just missing the aforementioned nilvaiu.dll

  Now, I'm doing that too simple?  Missing a few steps?  I also went on the way to an installer and get the same missing dll when I run.

  I am more than willing to read and learn, but I'm just not be quality for the correct terms or in the right places.  A point in the right direction would be much appreciated guys!

  Thank you

  Chad

  

  nilvaiu.dll installs with DAQmx

• Fail gracefully with missing dll

  Hello again all you lovers forum useful!

  The Situation:

  I have an application that includes a few subVIs that call the two DLLs via call library function Node live.  After generating the application and put the executable file and the two DLLs on another computer, I tested what happens when DLLs are badly named or otherwise not present.

  The current results of unfortunate:

  What is happening is the loading screw LabVIEW dialog box comes up, and in addition to this one dialog box open/save standard indicating "find the shared library named MyDLL.dll.  If I then press Cancel, another dialog box comes up saying "LabVIEW: resource not found.»  Error loading VI 'UseMyDLL.vi '.  LabVIEW support 3 error code: could not load façade. "When I press OK so that I get the same dialog box, once for each VI which calls the DLL.  After pressing OK a few more times, I get a list of each place, the subVIs that call DLLs are used, with lines like «Missing Subvi UseMyDLL.vi in MyTopLevel.vi VI.»  At the same time my Panel appears, but with the display of the toolbar of the running boom and broken.

  What I want to do:

  What I was hoping would happen is something like a dialog box that appears asking to find the DLL, and if Cancel was pressed, a dialog box saying "MyApp.exe could not run because it lacks the"MyDLL.dll"file." and nothing else happens or be shown.  Honestly, I'd rather not even invite the user to find the file.  It feels very rough for a distributed application.

  The questions:

  Does anyone know a good way to get the closest results of what I want to do?  The best idea I could get to is to dynamically load the screw-based DLLs, so that I can programmatically check the dll are there prior to the loading of these screws in and out gracefully by using my own code.  Is there a problem with using the call by reference or node Invoke to call the screw when I want the DLLs to stay in memory once they are loaded to save their State, and some of the screws that calls the dll must remain in memory because they are functional global variables?  Looks like there could be some pitfalls here.  I would be happy to know that alternatives to the behavior problem missing DLL, especially of solutions that do not require as much of a rewrite of the code.  ;-)

  As always, thanks for your time!

  -Joe

  1. Nice work on the test of unusual conditions. Just to have the State of mind is a good thing.
  2. I don't think the Nice load behavior you want can be applied on a global scale because sometimes the DLLs are loaded dynamically called code and which should not affect the application, but it could probably be applied to the static code called by the main VI in the executable.
  3. That said, it would not be worth, because it is a relatively rare event. If you put the idea in the exchange of ideas, I'll vote for it, but I wouldn't can't sleep if NEITHER has not spent all resources on this subject.
  4. You can load VIs dynamically as you suggested, or you can configure the CLN nodes themselves accept a dynamic path to the DLL, but I would say that this problem is rare doesn't not to warrant a change in the code. If you take really as long as you can load your app with a start of VI or EXE that will test the presence of DLLs and only if all of them are at will then dynamically load the main VI or EXE.

• Missing DLL, found dll, need to know how to put

  Load PC game Pacific Storm.  Goterror missing «d3dx9_28.dll» message  Went to site and downloaded a file compressed with inside.  Now that?

  HP Pavilion s5414y.  Windows 7

  This file belongs in the \Windows\System32 folder. Copy to that location, and then open a command prompt (cmd, right-click "run as Administrator"), type 'cd \Windows\System32', and finally 'regsvr32 d3dx9_28.dll"(without the quotes, of course). An easier method would be to run the DirectX WebInstaller, which checks if the DirectX files are up-to-date and adds missing * dll that you mentioned (download:http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2da43d38-db71-4c1b-bc6a-9b6652cd92a3&displayLang=en). "192GO should be enough for everyone." (of the miniseries "Next generation jokes")