Missing Explorer.exe to computer

Similar Questions

• Missing Explorer.exe, not the desktop icons or start menu/bar,.

  Ive tried everything from restoring the system for lost here im safe mode

  Ive tried everything from restoring the system for lost here im safe mode

  Sign in to Windows. Press Alt + Ctrl + del all at the same time. Should open the Task Manager. Once open, click on file > new task > type explorer.exe > Ok. Give a minute to load the desktop computer. All of your icons should now appear. Go below.

  Click HERE. Scroll down and look for ExplorerExeFix.reg. Download the file, save it to your desktop. Right-click on the file and select "merge". Confirm the prompt. Then download, install, upgrade and scan with Malwarebytes.

• Msconfig, explorer.exe & my computer don't work; W7 64

  I have w7 64-bit work very well for the last 3 days of many problems: some icons on the desktop do not respond (trash, post) also explorer.exe; they "charge" for a few seconds then will return to the msconfig same office 'load' for a few seconds, then back to the office at boot my gadgets loading on my screen and of course him disappear, I also AVG2013 & apparently no virus. Need help please

  Hello

  This looks like a virus or malware. So much more than anything started 3 days ago.

  At this point as you have tried all the troubleshooting steps, I suggest you try to do an Inplace upgrade.

  An upgrade on the spot is the final solution before you have to reinstall the operating system.

  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
  http://support.Microsoft.com/kb/2255099

  Thank you and best regards,

  Anil

• Explorer.exe error, Normaliz.dll is missing

  When I try to start my computer, I get the above error. I get the same when starting in safe mode. The only thing that works is the Task Manager. No desktop icon just a white screen. Where should I start

  In Task Manager, you can click file, hold down the CTRL key, and click New task and that opens a command prompt (or the boot safe mode with command prompt).

  If you have your copy of normaliz.dll on a USB key which is the D drive (for example), and XP is installed on your C drive, you can then type in something like this:

  Copy d:\normaliz.dll c:\windows\system32

  When the copying is completed successfully, you will see a message like:

  1 file (s) copied

  You can always do since if Task Manager:

  If you see a message like this:

  Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  It is in the case Log:

  Event type: Information
  Event source: Application Popup
  Event category: no
  Event ID: 26
  Description:

  Application popup: Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  Start explorer.exe, but the normaliz.dll file.  If explorer.exe is not able to run, you will not be able to do much with your system until the replacement of normaliz.dll.

  You can click OK for errors and finished up in the Task Manager where you can try to fix it.  The message can keep popping up from time to time, while you're fixing it, so just click OK to close the message.

  If normaliz.dll is missing, you can copy it from a working system to the system afflicted with the same version of XP and Internet Explorer.

  You will get a good copy and put it on a floppy disk, thumb drive etc and copy it to your system plagued by using Manager tasks.

  The normaliz.dll file must be located in the c:\windows\system32 folder and therefore is not a Windows file protected, making the Microsoft Support Engineer 'experts' suggest running sfc/scannow, which is just another one of their prosecution of wild goose that will not work, he'll never work and it will only waste your time (and they don't tell you how to run either - if explorer.exe does not start).

  Then engaged Microsoft Support Engineer 'experts' will offer to you develop a copy of the file from the XP installation CD you probably haven't, but it is also not on your XP installation CD, and you will have the same problem try their suggestions to 'try' to start in any any Mode without failure, so this will not help you.  These "experts" seem to think that the Safe Mode boot or boot will replace magically missing files, but it doesn't.

  You also will be able to properly run a browser on the system afflicted to go on Internet download one.

  There is a large computer security risk in the normaliz.dll from some website download.  The best idea is to get a copy of normaliz.dll from another computer that has the same version of XP and IE and replace it from a USB device (which you can access from the Manager tasks), or using a system that works, you can download one of my SkyDrive.

  You can still use the Task Manager to run the system restore and bring it back, but I've never tried and never use SR in all cases.

  If you have recently done a bunch of Microsoft updates, you may have also gotten IE8 so maybe that something was wrong here although the normaliz.dll is the same for each version.

  When you see the error, you can click beyond it and eventually arrived at your screen background image where you can press CTRL-ALT-DEL to start Task Manager. TM, you can click file, new task, Browse and edit the menu drop-down "Files of type" to all files that you can see all the files in folders.

  Go to c:\windows\system32 to see if normaliz.dll is really missing. If the error appears again while browsing, just click OK to get past it.  The explorer.exe tries to run and cannot until the missing file is replaced.

  If it's the only thing missing, you can get one from a working system of the same type as yours, copy on a Flash DRIVE or a floppy disk and always using TM, to browse, copy and paste it where it should be or you can download one of my SkyDrive.

  TM, you can still access your thumb or any other medium the same disk by navigating, copy, paste, etc very well all work.  You use TM to navigate to your thumb or floppy disk, copy the normaliz.dll good and then paste it in the c:\windows\system32 folder, where it is supposed to be.

  If things get worse, just return to TM and remove the file back where you were in first place and continue troubleshooting.

  Using a system that works, you can also download a copy of the file from my SkyDrive and put it on a floppy or USB thumbdrive and networks diskettes for the distressed system.  Sandalenet means wear you the system afflicted by hand.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called normaliz when the name of the file should really be called normaliz.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

• Error message Windows Explorer.EXE for lack of certificate root when the computer is turned on

  After trying to download updates from Microsoft to start my computer displays this windows explorer.exe error message...
  C:\windows\sys32\vsinit.dll--Il you are missing a necessary root certificate.
  As a result of this error message, I noticed that can't copy or move existing document files to any drive.  If I try to open a file backup quicken computer program stops and I have to restart the computer.  I tried to download other updates of Microsoft but they do not have to install, based on the error message above.  I do not have the xp software disk has been loaded on the computer when you purchase through HP and I never created software XP backup discs.
  Any suggestions on how to fix the missing root certificate error message for this problem.  Appreciate the help, and thanks for your suggestions to solve this problem.

  Hi ronjul2,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to a third party of program, ZoneAlarm, installed on your computer.  Try to uninstall and reinstall the software.  For more information about this error, you can visit the Support of ZoneAlarm.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Please let us know if this helped.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My explorer.exe will not respond when I start my laptop and my entire desktop computer eventually white

  My laptop worked fine when I turned it off for the night, and when I come back to use it the next day, that windows Explorer has stopped working when I turn on my computer. My whole office is empty, including my wallpaper and I can not enter in 'my computer' and 'my documents '. The Task Manager works and I can run iexplore.exe and other programs.
  Here are the details of the problem
  Signature of the problem:
  Problem event name: InPageCoFire
  Error state code: c000009c
  Type of media loopholes: 00000003
  Name of the damaged file: explorer.exe
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1042
  Additional information 1: 559f
  More information 2: 02934d2c52b3f39550891518a9d15746
  3 more information: 6ef5
  Additional information 4: b5d88008fbc27fee13f30131eedf2314

  I run on Windows vista 64-bit

  Hi shellysong, I suggest you follow troubleshooting steps from the method below. Method 1

  Step 1

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2

  I recommend you perform the clean boot.

  See the link below to learn more about how to clean boot.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  On the general tab, click the Normal startup option, and then click OK.
  When you are prompted to restart the computer, click restart.

  Method 2

   

  Try the SFC scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Windows 8 does not not log on screen, all black dekstop, explorer.exe, disc missing from the Task Manager

  Hey. I am a newbie in this forum. And I really like to make my PC more 'me' even though my parents and brother told me that my PC did not differ from how difficult. But, I still like my PC... ^ ^
  But my PC encountered a problem in my birthday (March 8, ehehe just FYI). Its a terrible birthday gift: (...) Oh, there. Its all started when I accidentally install a skin pack or win 7 in my PC 8 victory. There is nothing wrong with installing proggress except a notification which inform on win 7 Starter has not installed correctly. :( Well, I ignored, first. But after I have it reboot, my dekstop went all black but it still can open the Task Manager. And then I try the system restore. It did not work properly. The only thing made worse. Somehow, my "(le seul compte dans mon PC) DELETED account." In fact, the log on screen consist only of the ease of access and power button with backgorund optomistic. Where are the data of the user, I mean a place where we inserted the password? XC its make me super bad mood. And after some restoration system with various restore points, I restarted my PC in safe mode successfully. Yippie, its worked perfectly in safe mode. I created a new account in safe mode. I thought that my problem more but no. and the bad news is that there is only one user account (a new one) in the journal on the screen! It'll be better I have the new account very well work, but it didn't! The dekstop always all black with no taskbar and it's the same problem as the first.
  I am not really confusing. What should I do? Should I remove a skin pack safe mode? or reinstall win 8 in PC COUNTER? Or do something that you already know the guy?
  Help me. I am so irritated by this problem. In any case, I want to ask one last thing, you prefer something after me or just think it was a charitable organization? Well, I just want to know. And I'll do my best to show my appreciation once you help me. I am so TROUBLED even if today is my birthday! I want a big anniversary with neither party. But its seems no big birthday. Please, help me. His will probably be my MOST BEAUTIFUL GIFT to a person who I know in internet. If you need something detailed about my problem, ask me. I need your response. :") SURE ME MY CRAZY MOM, IF SHE KNEW IF I AM WRONG IN MY PC AGAIN.

  Oh, there. The explorer.exe does not start in normal mode, but it works fine in safe mode. Also, I discovered that the disc is missing from the Task Manager. :) Help?

  Wish you a very happy birthday, Damaris.

  Of course, I can understand the situation you're in right now, and it's a shame. I will be happy to answer your query and try my best to offer my help as a gift for your birthday.

  Let me ask you;

  1. What happened when you tried the system restore?
  2. What was the last time that the computer worked well?
  3. What security software is installed on the computer?
  4. Remember to no particular change in the computer before the show?

  The issue may be due to any dispute of third party software, virus or any system or missing files / corruption. Let's try the methods below and check the status.

  Method 1: Since you are able to start the computer in safe mode without any mistake, I you suggest to start the computer in safe mode and then perform the clean boot to avoid software conflicts.

  Step 1: Start the computer in safe mode (as you are able to start the computer in safe mode with the steps you tried).

  Step 2: Perform the clean boot

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 2: Run Microsoft Safety Scanner

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  Microsoft safety scanner

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: Data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Method 3: Run the tool File Checker system in case where any system files are missing or corrupted.

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Enter in the right edge of the screen and then click on Search. Or, if you use a mouse, point to the corner bottom right of the screen, then click on Search. Type the command prompt in the Search box, right click invite, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  At the command prompt, type the following command and press ENTER:

  sfc/scannow

  Note: Not close this command prompt window until the audit is 100% full. The results of the analysis will be posted when this process is completed.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• What is the program "explore.exe"... All of a sudden, he took over my computer and it is with the HELP of 95-100% of the CPU?

  I got these numbers by displaying the Windows Task Manager...

  Hello

  1. All changes made to the computer before the show?
  2. When exactly this question produce?
  Essentially, Windows Explorer is used to browse the files and folders in Microsoft Windows. When running the explorer.exe file, a window of the application is started and allows the user to navigate the content of files and display the file information.
  Do the methods provided and check if it helps to solve the problem.
  Method 1:
  Check out the link and follow the steps.
  Explorer.exe process uses many CPU Cycles when Windows is idle
  http://support.Microsoft.com/kb/317751
   
  Method 2:
  Check out the link and follow the steps.
   
  Slow PC? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx#fBid=1vrPRuhAhAg
   
  For reference, you can visit the following links:
   
  The CPU utilization reaches 100 percent when you run programs after you install Windows XP Service Pack 2
  http://support.Microsoft.com/kb/890582
   
  The CPU usage may reach 100 percent when you resume a computer that is running Windows XP standby mode several times
  http://support.Microsoft.com/kb/903737
   
  the 100% CPU usage may occur under some battery conditions
  http://support.Microsoft.com/kb/328915

• Explorer.exe stops when the computer is shut down

  Explorer.exe stops when the computer is shut down

  Hi DickKimberley,

  ·         What exactly happens when you try to shut down the computer?

  ·         You receive an error message error code?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check.

  Advanced Troubleshooting for shutdown problems in Windows XP

  http://support.Microsoft.com/kb/308029

   

  Method 2: If the method above doesn't follow the article mentioned below.

   

  Windows stops responding during Windows XP shut down

  http://support.Microsoft.com/kb/307274

  Let us know if that helps.

• Unable to start my computer! 0xc0190036! 363/63561 (Explorer.exe)

  Hello world!
  Ive installed windos vista service pack 2 and my computer can't be started.
  Ive got the black screen and it says:
  !! 0xc0190036! 363/63561 (Explorer.exe)
  pls help me if someone knows.it wil be appreciated.
  PS Sorry for my bad English

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And there is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.

• When you try to turn on my computer which has windows vista, I get this error code '! 0 * c0190036! 535/95417 (explorer.exe)

  When you try to turn on my computer which has windows vista, I get this error code '! 0 * c0190036! 535/95417 (explorer.exe)

  Hello

  -Remember to make changes to your computer, after which the issue started?

  I would recommend that you follow these steps and check if the problem persists.

  Step 1:

  Start your computer in safe mode.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   

  Step 2:

  If the computer starts in safe mode, there must be a third party software that is causing the problem to occur, this is why I suggest you put your computer in a clean boot state.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  Note: Put your computer in normal mode (step 7).

  Step 3:

  If you haven't already done so, I would say doing a full scan on your system.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• Whenever I open my computer I get this message: "explorer.exe has stopped working".

  original title: explorer.exe has stopped working

  whenever I try to open my computer it tells me that windows Explorer has stopped working, everything else works but when I go into safe mode it let me go in my computer and I checked for viruses and there is no someone help me, please to fix this i dnt want to start over and lose everything. hope to hear something back as soon as possible. Thank you and have a nice day.

  Hello

  The computer works fine in safe mode, I suggest you perform a clean boot in order to check whether a third-party program or service that runs in the background is the origin of the problem.

  Refer to this article for help:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  
  Note: please check that you put your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the article above.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• I closed my shot explorer.exe process in my task manager and now I can't load my computer, control panel and these files, can someone help me? When I try to open their message comes that no such interface supported.

  I closed my shot explorer.exe process in my task manager and now I can't load my computer, control panel and these files, can someone help me? When I try to open their message comes that: {26EE0668-A00A-44D7-9371-BEB064C98683} not this interface supported...

  Hi MAMARDA,

  Welcome to the Microsoft Vista answers Forum!

  I would like to ask you a few questions in order to get a better understanding of this issue so that we can better help you.

  (a) what version of Windows 7 use you?

  (b) what is the exact error message you are getting?

  Method 1: You can also try to perform a file system (scan SFC) verification tool. This tool will fix the system files are corrupted.

  Scan SFC enforcement procedure:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  Method 2: If this is a recent problem that has developed you can try to perform a system restore and check if it works very well.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

  4. click on finish

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please follow the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  Method 3: you can try to start safe mode and restore the system, if you are unable to do it in normal mode.

  For a safe boot, you can follow the below given steps:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  2. do one of the following:

  a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  When you are in safe mode, follow the steps mentioned above to complete the restore of the system.

  Hope the helps of information.
  Please post back and we do know.

  Concerning
  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 Professional 64 bit explorer.exe hangs in my computer when I right click on my hard drive. Disks appear in the Solution Explorer or eject.

  I have a serious problem when one of my windows, my main Administrator profile profiles, is very strange. Other profiles created on the computer, the administrator or standard user, all do not have this problem. The problem is when I open my computer, on my main administrator account, my hard drive is not recognized. There is a disc in the drive and it will not eject, nor will it recognize one is in the computer. The drive will appear in my computer, but there is no information on the icon about what drive is in the computer. Secondly, when I right click on it, the computer freezes and crashes explorer.exe. Once I have restart explorer.exe everything goes back to normal, but the problem is still there. I have this problem on other users on my computer. A system restore did not work, nor has a registry restored to an earlier period. In addition, everything else on the computer works fine, and there is NO virus or Trojan horses. I ran several deep scans with two different software, Microsoft Security Essentials, and Malwarebytes. I've taken I have a corrupted user profile and try to transfer my files in a new profile through the instructions from microsoft on their Web site. When I finished this profile has been impossible to obtain the necessary permissions to use files and I got errors trying to open anything. This problem has a solution, and I refuse to do a restore on a computer that otherwise does not work correctly. I would not have to re - install the operating system, or transfer my profile on a new resolution to this problem. Can someone at Microsoft help solve this problem? Thank you

  Hello
  See the link below:

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• Explorer.exe unknown error when I open my computer

  Hi, I have windows 8, I am facing a problem with explorer.exe. When I open my computer, he directs me to the start menu, and then do nothing, he opened the office and an unidentified error. It just says: explorer.exe with the sign of exclamation point.
  can someone help me? I'm not much of a kind of technology of person. and also, I tried the scan using Norton antivirus and Microsoft System, but both detects any problems. so I guess the problem might have something to do with the registry. but I don't have NOOOOO idea how to solve this problem. Thank you

  If you're still having problems, see this thread:

  http://www.eightforums.com/performance-maintenance/19779-Explorer-exe-error-every-time-Windows-8-start-up.html