Missing file when creating a recovery disk CD

Hello

At first my English isn't the best.

And now my problem:
When I try to create a new HARD drive recovery CD an error telling me there is a missing file

This is the error message:

The following file could not be opened,
F:\08011XSP5.swm
(Error 020123-F1-00000000 code)

I just translated the error message then maybe there are a few mistakes in there.
I got a Satellite A300-1QD. Obtained on 20 March.

I put t know what to do. Can someone help me?

> I don't know what to do. Can someone help me?
In my opinion, you should follow:
Make screenshots of all the errors as evidence. Try to create a recovery media using DVD-R media and use high quality as TDK or Verbatim media.

If the same thing happen again try to contact nearest authorized maintainer and explain the situation. I hope that you will get a new original Toshiba recovery media.
The missing file is a serious problem for me and if you are unable to create recovery media, I fear that you can not install Vista using F6 option and the HDD recovery procedure. If this is true, you can stay without an operating system. Please don't make any experiences with F6.

Contact ASP and try to get a free recovery media. Use screenshots as evidence.

By the way: I Satellite A300, but I got lucky and creation of recovery worked correctly.

Tags: Toshiba

Similar Questions

  • Satellite L300-1AS - error when creating a recovery disk

    I am trying to create disk recovery for Sat L300-1AS,
    I tried a number of different DVD discs of high quality on DVD - R / DVD + R, but each time when the system checks the data, I get an error message 02016F - 3 c 00000000

    What am I doing wrong please help as frustration is really starting to kick now

    Thank you

    Hello

    Die get the error not fully compatible DVD disc.

    I created a recovery disk using the TDK DVD-R disc. Some people, he suggested too.

    I think that worth a try!

    Welcome and good luck

  • Satellite L655 - missing file when creating recovery media

    Hello

    I just bought two new Satellites a L655-1EM and a L655-17V (I think - pink and red). In any case I tried to burn some media of recovery - which I find a little cheapo, making do us it ourselves!

    During the process, he said there is a lack of file and hangs on. I tried this on the machines and the same result. I use discs double layer. Any ideas? Do Toshiba shell on a disc of recovery in such circumstances - I already DL three frisbees lol.
    I'm more than worried a little, as if something bad happens I have no confidence that I will be able to recover.

    Some tips/advice?
    Thanks in advance :)

    Hello

    Have you ever tried 4.7 GB standard DVD?

    I used the Verbatim DVD-R 16 x 4.7 GB speed to create recovery discs and it worked correctly. I t n have no problem. The discs I've tested without any problem.

    You can test this please?

  • "Can't find the necessary files" cannot retrieve or create the recovery disk. Help!

    I can't refresh PC or create the recovery disk. He keeps going with error message "Cannot find the necessary files" and tells me to insert the recovery media. There is no system restore point, and I've upgraded to Windows 7 Windows 8 Pro without a disc, so I can't do anything. Help! Strangely, nusrmgr.cpl disappeared, although I had seen the shortcut a few weeks ago (no, I'm not deleting it).

    Hello

    I imagine the inconvenience that you are experiencing. I'll certainly try and help you in the matter of fixing.

    To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

    1. Why are you trying to cool off the computer?

    2 are you facing problems with Windows 8?

    3. how many accounts is configured in the computer?

    You can scan the file system (CFS) auditor. This will replace the corrupted Windows files.

    Follow these steps:

    (a) start the desktop view.

    (b) open the command prompt, right-click in the left corner when the windowappears, and select prompt (admin).

    (c) type the following command and press ENTER:

    sfc/scannow

    The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

    You can also try to create a new user account and check if the problem persists.

    If the problem persists, you will need the DVD to perform repair installation of Windows 8. If you download the installation of Windows 8 files, check your emails, there should be a link to download an ISO file. Download and burn the file to a DVD.

    The DVD to perform the repair.

    Hope this information was helpful and let us know if you need more assistance. We will be happy to help you.

  • Satellite U205-S5034 - error when you try to create the recovery disks

    Hello world

    I have problems with the TOSHIBA recovery disk creator. When you try to create the recovery disks this error pops up:
    An unexpected error has occurred. Exit this application and start it again. (Error code: F1-0F00FE-00000002)

    The machine is a Satellite U205-S5034 under XP Pro SP3.

    Any help will be greatly appreciated. Thank you and have a nice day.

    DaveMatt44

    Hello

    What kind of DVD that you use to create a Toshiba Recovery disk? I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. A friend tried DVD + R and he couldn t create a recovery disk. After he tried DVD-R and everything was fine but I do not know why this happened.
    So please try other discs.

    Also, check the Toshiba page for an update of the firmware of the CD/DVD drive. Maybe it will help you.

  • HP Pavilion 17 - I was sick, created my recovery disks and a BIG thank you

    After being sick for about 7 days, I was finally able to create my recovery disks on Friday, 1/24.  Everything seems fine except for a couple of pop-ups in the process.  The two pop-up windows had to do with DVD RW drive E one say a word on the listen to what is happening with removable disks and another on plays to see what is happening with the blank discs.  These 2 messages appeared after having burned the first disc, discs later and disappeared before I could answer.  But, I think that the creative process was not serious, because each disk burned correctly, each disc has been verified and message saying something on start-up line was made.

    I also read in my sense that you delete the recovery partition on the hard disk to reclaim space for additional storage.  Is this something rreally what should be done?

    Also my Revovery (D reader says it was modifed 01 24, 2014 at 10:38, file type.)  Why we say that, when I created only the recovery discs?

    In addition, on my HP Support Assistant it said still to creat in 2 sections recovery discs, one in "Updated and developed them, HP messages" in the section «Battery and performance»  I used the printed instructions from HP to create consumer support of discs.  This is - why it still makes its appearance in the HP Support Assistant and I can remove them from there?

    Thanks-Yous of thanks go out to those who have helped me on this site, especially CherylG.

    CherylG, you've been very patient with me for answering all my questions.  I know that I have brought you crazy with some of them!  And I can certainly understand that, but you show no frustration with me in the comments to my questions.  You know, be patient with us, the elderly (laughing while typing this comment).  I know for a fact that I will have that other qustions happen if I can't easily find the answers in the online documents.  I hope that you will help me once again (LOL, laughint outloud here).

    Oh, I noticed the length of time you've been helping people on this forum and the number of responses you have accumulated in this time.  I am very sure that there are many people who have used and still use this forum appreciate your expert help... I know I do.

    Thank you, once again.

    A little encouragement?  I would say that you have provided a lot of encouragement I really needed.  Thank you for your answers to my questions in the post above.  Oh, the information on the HP Wizard program in the manufacture of recovery disks that disappeared.

    Thanks again for your expert advice.

    Take care.

  • Satellite L - how to create a recovery disk?

    Hey,.

    I accidentally uninstalled the program "Recovery Disc Creator". But the folder with Win Vista Recovery disc information are still in my computer. Now, I want you help me in creating a recovery disk. My system is very unstable. So I want to re install. I hope you can help me.

    Sorry, but why did you uninstall the recovery disk creator?

    However, now you can not create the recovery disk because you have uninstalled the program to create the disc.

    The only way I know is you use HARD drive recovery option to reinstall your laptop. You can use it if you go to the advanced boot menu (F8 before Windows starts), choose repair my computer, and then select the Toshiba HDD Recovery feature.

    Normally you get this message if you start your laptop on first use:

    + Important INFORMATION +.
    + your system is equipped with a hard drive recovery system. If you need repair.
    + your computer in the restaurant to original factory State, you can do it directly.
    + HDD (press F8 when you start your computer, choose "Repair your computer" +)
    + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

    + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
    + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
    + Gets severely damaged.

  • Satellite U500-17F - problem of calibration by trying to create the recovery disk

    I have exactly the same problem with the calibration by trying to create a recovery on Maxell DVD media disc + R I tried twice 2 DVD different each with the same error. Then I burned one of them on my desktop without any problem. When I tried an Emtec DVD + R support on the laptop it burned successfully.
    The laptop is Satellite U500-17F with Mat * un DVD-RAM UJ862AS. There is an incompatibility of Mat * one disc with Maxell DVD and must be fixed with a firmware update but Mat * one did not like.

    Hello

    I had a problem with a different disc from different manufacturers.
    Finally, I tested the TDK and Verbatim and could create the recovery disk using DVD R media!

    Test other brands!

  • How to create a recovery disk using external hard drive?

    Is it possible to create the recovery media on an external hard drive instead of using a USB flash drive or an optical medium?

    I was making mistakes when creating the recovery on optical disc media.

    Thank you!

    Hello

    As far as I know it of impossible to create a Toshiba image on HARD drive
    You need burn the image to disk (DVD).

    Welcome them

  • Screen flickers on Satellite L300 and I am unable to create a recovery disk

    Hi all

    I just bought a model L300 PSLB0C 08R08C number.
    I was unable to create a recovery disk, I was getting an error message saying it cannot create disk because it is scratched or has dirt on it, I lost 5 nine DVD.

    I am went to the store and replaced by another unit, but had the same problem (I have not tried a different brand of DVD well)

    Second issue with this device, the screen flashes once whenever it is in a shutdown state.
    Number 3, the wireless card disappears from the Device Manager, until I restart.
    Laptop made in China ;-)

    Any suggestions are much apprecaited

    Hello

    It is indeed strange that you were unable to create a recovery disk, and that the problem has resurfaced, even after permutation of the laptop with another unit of the store. However, if you have not tried a different brand of DVD so I suggest that if the laptop asks the disc is scratched or has dirt on it. I'm not sure if toshiba factory in fact blank DVDs, but if they do, it would be a starting point, as one would expect hardware toshiba would happily work with their own brand DVD media. However, if you can't find toshiba dvd then use another trust mark, for example, Imation and TDK. with my experience, I have tried many brands of DVD and have found very reliable TDK.

    regarding the second question, this may be related to the graphics card in the system, or could be due to the performance of the computer laptop itself. Check that you have the latest driver for your graphics card and all the settings on the computer are optimized / hard drives are defragmented and deleted unnecessary files. with your third question, this question could also be related to driver problems, check your regional drivers toshiba site for the latest drivers again. failing this, I would back up your data and then restore to a factory condition, then install the drivers immediately. I hope this info can help you somehow.

    Welcome to the forums and please leave helpful points or correct answer for any useful advice that has been given in response to your problems (e.g. to read the forum rules)

    concerning

  • Backup in Windows XP Wizard allows no choice of drive to create the recovery disk

    Backup Wizard requires a 3.5 floppy to create a system restore disk. When my system and many others have more 3.5 disks... How to solve?

    Original title: windows xp absence of 3.5 diskettes and Backup Assistant

    Hello JohnAdams2461,

    You're right, that Windows XP requires a floppy drive to create the recovery disk.
    Most newer systems do not have a floppy drive.

    View information in a previous thread with the same question.
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/cant-create-system-recovery-disk-using-backup/a3e2312b-006D-4f80-940c-254e5f00f1acz

    Best regards, k

    Marilyn

  • How to create the recovery disk

    Hello

    can someone help me create a recovery for my laptop Hp Pavilion G6 disc - 2330 m

    Windows 7, 64 bit.

    After inserting a dvd, I went to all the programs/maintenance/create a system repair disc

    but it gives the following error:

    The system repair disc could not be created

    The parameter is incorrect. (0 x 80070057)

    I posted earlier on my laptop freezing and respondent very late in command. I decided to create a recovery disk but have resulted in this issue.

    Help, please.

    Concerning

    Maury

    I suspect that the operating system on your laptop is probably not an OEM copy because of which the Recovery Manager is not available

    FYI, if the Recovery Manager was available, you can restore (restore your laptop back to the factory State) without the need to create recovery discs. The D:\ disc that is the recovery partition that would help you to do on your laptop.

    Try these steps and see if it works.

    1. click on Start button and type "devmgmt.msc" without the quotes and press ENTER key

    2. right click on the drive D:\ - HP Recovery partition and select Mark Partition Active.

    3. what would give you an alert/prompt, where you must choose Yes brings you to the Recovery Manager screen and restart your computer. You can follow the link that I provided above to start the process of recovery on your laptop.

    Note:

    Please backup your files before recovering on the laptop that it would result in the loss of data.

  • I can't find the field 'upload file' when creating a web form

    Hi, I can't find the field 'upload file' when creating a web form. This is the site I put for my client home | ServilogEX. And I attach a display of the form.

    Am I missing something?

    Thanks in advance,

    Diego.

    screenshot.png

    Hi Diego,.

    Your site map is too low. I believe that you must 'webMarketing' plan or higher to support downloads of files in the web forms.

  • Create the recovery disk - operating system developed at level

    When I got to my x 201, I got Win 7 Home and I created the recovery disks. I then upgraded to Windows 7 Professional and I tried to create the new recovery but message says system recovery cannot be created only once.

    I can create the new collection to reflect the Win7Pro?

    Thank you very much for the help.

    pit says:

    I can create the new collection to reflect the Win7Pro?

    Thank you very much for the help.

    Hello, ditch,

  • Re: Satellite L355D - how to create a recovery disk?

    I searched all over the forums, but does not know how to create a recovery disk works for my laptop. I know it is run from a partition on the HARD drive, but I can't figure out how to access this partition. Should there be some sort of built-in utility?

    Thank you

    You can create the recovery only DVD disc if your laptop computer has preinstalled Toshiba recovery disc creator and factory settings.

    Please check if you can find this tool under start > all programs > Toshiba. There you should find shortcuts to launch this utility.

Maybe you are looking for

  • Satellite Pro T110 - speaker volume problem

    How can I increase the volume on the speakers in my T110?Ive read other forums that suggest that it is just the way it is, but who is not normal - its impossible to hear on max.My partner has a Toshiba NB300 (much smaller), but the volume of the spea

  • HP ENVY x 360 Convertible: add about external gpu on my laptop

    I want to add external gpu on my laptop. It is very important to add a gpu because I am not able to play games of high quality graphics with intel. Please give me a solution. Thanks in advance

  • Address IPv6 for E2500

    I have recently installed a dual band Linksys E2500 and noticed that there are IPv4 and IPv6 addresses. Is this a normal configuration? What is a normal IPv6 address for Linksys routers?

  • I can't block an e-mail address

    I got this email from this person harassing me: * address email is removed from the privacy * I added to a block list, but he said: "an email address must be in the following format: * e-mail address is removed from the privacy *.» A domain must be i

  • Disableing a field

    Is it possible to disable a field so that it cannot be edited or concentrate? I tried setVisualState (ButtonField.VISUAL_STATE_NORMAL) for a few buttons I have, but they are only temporarily disabled (or at least look disabled).