Missing J4680 Device Manager - cannot scan

Similar Questions

• AFD missing from Device Manager - no network connectivity

  We have a customer with a virus.  Once removed, we noticed that the network connection is always "obtain an ip address.  Find DHCP cannot start because AFD does not.  We cannot start AFD due to no devices being present.  There is no AFD in under non plug-and-play drivers Device Manager.  In HKLM, there are appropriate under the currentcontrolset\services key entries.    The afd.sys file is there and has even been replaced by a good.  How you can AFD add back to the Device Manager.

  If the AFD is missing from Device Manager, view, show hidden devices you can add.

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  Open Notepad to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines in bold text in the new Notepad file.

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AFD]
  "DisplayName" ="AFD".
  "Description"="AFD Networking Support Environment.
  "Group"="TDI".
  'ImagePath"="\\SystemRoot\\System32\\drivers\\afd.sys '.
  "Start" = DWORD: 00000001
  "Type" = DWORD: 00000001
  "ErrorControl" = DWORD: 00000001

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AFD\Parameters]

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AFD\Security]
  "Security" = hex: 01, 00, 14, 80, 90, 00, 00, 00, 9 c, 00, 00, 00, 14, 00, 00, 00, 30, 00, 00, 00, 02,------.
  00, 1 c, 00, 01, 00, 00, 00, 02, 80, 14, 00, ff, 01, 0f, 00, 01, 01, 00, 00, 00, 00, 00, 01, 00, 00,------.
  00,00,02,00,60,00,04,00,00,00,00,00,14,00, fd, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00,------.
  05,12,00,00,00,00,00,18,00, ff, 01, 0f, 00, 01, 02, 00, 00, 00, 00, 00, 05, 20, 00, 00, 00,------.
  20,02,00,00,00,00,14,00, 8 d, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00, 05, 0, 00, 00, 00, 00,------.
  00,18,00, fd, 01, 02, 00, 01, 02, 00, 00, 00, 00, 00, 05, 20, 00, 00, 00, 23, 02, 00, 00, 01, 01,
  00,00,00,00,00,05,12,00,00,00,01,01,00,00,00,00,00,05,12,00,00,00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AFD\Enum]
  "0" = "Root\\LEGACY_AFD\\0000."
  "Count" = DWORD: 00000001
  "NextInstance" = DWORD: 00000001

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:

  fixafd.reg

  After you save the file, close Notepad.

  Locate the file fixafd.reg on your desktop and double-click it.

  Alternatively, you can right-click on the fixafd.reg file, choose open with... and select the registry editor.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  Reboot your system and test.

  You can delete the fixafd.reg file when you are finished.

  If the registry editor has also been disabled, we first fix (not a problem).

• HP OFFICE NETWORK CONTROLLER MISSING IN DEVICE MANAGER

  I can't connect to the wi - fi network because the network controller is missing in Device Manager. Please help with link where I can download the right software to. My hardware ID as it is in Device Manager - Properties - Hardware ID is

  PCI\VEN_1814 & DEV_3060 & SUBSYS_3C041186 & REV_00
  PCI\VEN_1814 & DEV_3060 & SUBSYS_3C041186
  PCI\VEN_1814 & DEV_3060 & CC_028000
  PCI\VEN_1814 & DEV_3060 & CC_0280

  Please I need help fast.

  Thank you

  Hello

  the drivers are here.

  You don't specify what operating system is installed.

  Is a HP 500 b, your desktop PC?

  Best regards

  ERICO

• HP p077tx: missing in Device Manager Wifi adapter

  I have a HP p077tx laptop and it is under warranty.

  As for 2 months I have problems with wifi as my wifi adapter used will be unavailable after that I woke up my laptop from sleep. I mean the wifi was not simply disconnected, but there was no adpater wifi under the Device Manager list. Once I chose scan for hardware changes generally used to be back again.

  But last Wednesday, there just no and now it is gone forever. Tried rebooting several times which did not help of course.

  I thought the system restore using the windows system restore to a date before I had this problem. However, as the laptop starts again wifi was back and works normally as it used to. I have never put my laptop to sleep but just turned off. Next morning the wifi always worked and I thought that the problem has been resolved, but it was only before I put my phone back to sleep and later, he was gone.

  I also tried to remove the drivers installed for it programs and features, but it does not allow me to uninstall them and jumped an error saying that it cannot be deleted. \update 65.

  There is no option to uninstall the driver from Device Manager, as I said is not even appear in the list.

  So I tried to reset the laptop and it's same thing happened for a restoration of the system. After putting the laptop on standby it wasn't everything again.

  Help, please.

  Hello @ManjrekarOm,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the WiFi and wanted to help you!  I see that the problem seems to be related to when the laptop returns from Sleep Mode.

  First of all, try to review the following document and let me know how it goes:

  HP PC - Troubleshooting wireless network and Internet (Windows 10)

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Compaq 6910p ACPI driver missing on Device Manager

  I have a compaq laptop 6910p with drivers missing ACPI on Device Manager. I tried to get a download link for Hp to solve the problem BUT nothing helped. I am using windows Xp Pro SP3

  Any person having a relationship? I'd appreciate it.

  Thank you

  Hello:

  Here is the link for the driver you need.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 3357377 & prodNameId = 3357378 & swEnvOID = 1093 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-48325-1

  Paul

• Envy of HP Touch Smart 17: HP Mobile Data Protection sensor missing in Device Manager

  I had a HP 3D drive guard error after installing drivers of devices in Device Manager in the control panel.  I looked on Google for answers and they said to find the right driver on the HP website, sp71811, uninstall the old drivers and install a new one for this laptop.  I did this and got an error DLL missing after restarting the machine.  You told me to uninstall again and reinstall and do not forget to restart after uninstalling.  The installation said it was incomplete, that the files were not completely installed.  I got an error message about a missing .dll file (don't have the error code now).  Something about a file stack error.  I went to the Device Manager and uninstalled the driver for the HP mobile data protection thinking can I reinsall that Device Manager but he removed the accelerometer.  Now I can't download HP 3D DG due to missing accelerometer.  How can I retrieve the accelerometer and the original problem with HP DG 3D?

  Hello:

  Try the latest version of the 3D driveguard driver...

  This package provides the software HP 3D DriveGuard to the notebook models that are running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  FTP://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75979.exe

• HP Pavilion G6: Wi - Fi mobile missing from Device Manager download driver does not help

  I have an old HP Pavilion G6-1d98dx I got like a hand running Win 7 Home Premium 64 - bit SP1 and cannot get the wireless working.  The orange/amber light on the F12 key is on and cannot be disabled.  The Wi - Fi equipment is Ralink 5390 rev3.  The device does not appear in the device as one 'hidden' or 'other' Device Manager, much less as a network device.  I downloaded several different drivers on the HP site for this unit, including a dated January 2016, without success.  Any suggestions?

  At any time.

  I am pleased to have been of assistance.

  You don't need to do a thing... the card will work, or it will not be passed the HP welcome screen until you get a card error wireless not supported.

  Here are the links to the wireless and bluetooth drivers you need for this card.

  This package contains drivers for the Broadcom Wireless LAN Server supported in models cards mobile supported and operating systems.

  File name: sp57965.exe

  This package contains the Broadcom Bluetooth driver and software for models supported that are running a supported operating system. Broadcom Bluetooth 4.0 driver is required to enable the Broadcom Bluetooth 4.0 devices and is compatible with Broadcom Bluetooth 3.0 and earlier versions.

  File name: sp55079.exe

  Please post back and let us know how did the swap of the wireless card.

• CD-ROM/DVD-ROM missing from Device Manager, FRUSTRATED!

  I jumped on my computer today, to copy a disc in iTunes and found that Windows is for some reason, do not recognize my DVD/CD drive.  Now, the drive is very good; This works.  I put in a disc and it runs.  But that's all.  I go to Device Manager to see what is the problem and I find that the knot of READERS of CD-ROM/DVD-ROM is missing altogether.  -What happened?  If anyone can help (not you, Rob;) I already tried everything in your list of suggestions), please.  I would appreciate.

  DT

  Hi Dtorres,

  • What exactly do you mean by it works when I insert the disk?

  If the device is missing in the Device Manager, it may be due to hardware failure or if the drive cables are not connected properly. This can also happen if there is a damage in the drive cable, windows will not be able to detect the drive.

  However, you can contact the computer manufacturer to verify if there is any firmware that you can install for the CD / DVD player and if you can run a diagnostic tool for the material.

  You can also start the BIOS of your laptop and check if the drive is detected in the BIOS and post back the result.

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• DVD bluray missing in Device Manager

  I installed windows 7 pro from CD-Rom. I have barely use cd CD-Rom so I did not notice that all of a sudden my DVD drive has disappeared in the Device Manager. When you insert a disc, it rotates but does not start. BIOS sees the optical drive. BIOS has been also updated. All drivers have been updated. Googeled solutions and delete some keys but that did not work. Also restored the laptop to the previous state, but the disc has not been and cannot be restored later. There is a problem on the HP site but also no results.

  Can't believe that the drive is dead, I installed windows from it.

  Do not want to reinstall windows, as I have to be perfect.

  Any who know this problem and have a solution?

  I have a HP 8760W (not "ban" me at the business forum. I bought the laptop not for or on behalf of a company)

  It works. New DVD's ok.

  Not happy at first when I received the replacement however. I ordered exactly the same model. When I received the new dvd player, it turns out that the front was different (higher) and a metal strip which is screwed on the disk and is used for mounting the drive in the laptop was different. So the new reader did not. Took do some MacGuyvering to get the new drive to adapt.

  But it worked, dvd drive is showing in Device Manager now, so happy .

• Satellite L500 - wireless network adapter is missing in Device Manager

  Hi guys, I have read a lot of discussion but not found a job of answer to my problem and yet, although this doesn't seem to be a common problem, so I was wondering if someone can help out me. Model laptop is L500-1VT. There is no switch on / off external WiFi.

  In short:
  -Awake portable sleep, already before his pan was connected to wifi, but suddenly had no connection.
  -Adapter doesn't not appear in Control Panel, so checked Device Manager. Isn't there. : S

  -Thought that maybe something has come loose? But then checked msinfo32.exe and adapter was seen here.
  -Read a lot of discussion about it being from PVAT with FCU, then followed advice doing reinstalls and uninstalling and reinstalling driver wlan (this being seen in lost msinfo32.exe.) Unfortunately, it did not work. Still not apparently visible to windows.
  -Fn + F keys never worked and after reinstall of the above programs still do not work.
  -Wireless is enabled in the bios.

  -However, and I don't know if it's the crux of the problem. * Wireless is DISABLED in HWsetup.exe. When I try to turn it on, it says reboot needed. If I do that immediately, or much later, I get a blue screen and memory dump.* so I'm sure it's a software problem.

  -J' also tried restores system and disks of microsoft repair. But I am at a loss about what to do now, so use my phone via USB WiFi to connect to MTAs.

  If anyone has any ideas, it would be great!

  Hello

  WLAN works when you restart your laptop?
  Latest version of the BIOS is installed on your laptop satellite?
  Have you tried updating the BIOS too?

  And Yes, last question: do you use the original OS that you got with your laptop (recovery image)?

• Re: Drivers for BT missing in Device Manager

  Hello!

  I have a Qosmio G30 with Win XP MCE... A few weeks ago, I have reinstalled my system normally with recovery cd... Now, I noticed that when I want to use bluetooth, I find no sign of bluetooth technology and even without driver bluetooth in my device manager... I also tried to install battery bluetooth and bluetooth monitor but these utilities were functionless... I read a lot of discussion in this forum but you have not found a similar problem...

  as far as I know BT device is listed in Device Manager, of only if BT is enabled. To do this turn on WLAN using the WLAN switch (the WLAN led should be on). Combination of keys after you have made this BT activate using FN + F8.

  Can you please tell us what will happen when you do this?

• Device Manager cannot recognize Installed AMD Phenom II X 4 955

  Hello

  I have HP Pavilion a6560a Desktop and had 9850 AMD processor running Windows 7 Professional with SYSTEM 7.1 rating. I installed AMD Phenom II X 4 955 CPU but or the windows Device Manager recognize my CPU as 955, it reads with 803 Mhz AMD processor as being unknown and the System CPU rating is down from 7.1 to 3.7. Could you please guide me what should I do for the motherboard to recognize the new AMD 955 processor?

  However Windows 7 is loading and the system works very well. but the system side is low and Manager device and POST do not recognize that the new installed CPU.

  Thank you

  Concerning

  "Is there a way I can update the firmware for this CPU? No, unless you can find someone to change the BIOS, as HP has not.    Perhaps you could make friends with guys to BIOS Mods to ask a mod firmware for the BIOS.

• COM PORT is missing in Device Manager

  When I have found that on that day there, I opened Device Manager, devices mobile COM port option has disappeared from the Device Manager. This who should I do to solve this problem...

  Hi all

  Product name: HP15R033TX

  Operating system: Microsoft Windows 7 (64-bit)

  When I have found that on that day there, I opened Device Manager, devices mobile COM port option has disappeared from the Device Manager. This who should I do to solve this problem...

• PA: Uninstalled my webcam drivers and now webcam is missing from Device Manager

  Hello

  I had trouble with my webcam I decided to uninstall the driver to try reinstalling one from scratch.

  The problem is that now my webcam is still not displayed in Device Manager, so I can't access its settings to try to update the driver.

  It was a very stupid thing to do, and now I don't know what to do...

  Thanks in advance!

  Cecilia

  Hi Cecilia,.

  Unless you have already done, the first thing I would say is just to reboot the laptop and see if Windows RE-discovered the Webcam and load a driver for it.

  If this does not work, try to run the system restore to return the machine to a point in time before that you deleted the windows driver - see Option 2 below.

  http://www.tenforums.com/tutorials/4588-system-restore-Windows-10-a.html#option2

  Kind regards

  DP - K

• The monitor icon is missing in Device Manager

  Monitor-viewsonc vm2235wm; NVID 8600gt video card; 6750 cpu;
  After concluding an update of the software of ms on 09/09/09, restart vista. Boot vista system good to load the monitor says no signal and stops. Vista keeps going with the sounds of startup vista responsible for confirming. A made a forced stop and start in safe mode. Monitor now works. Go to the device, active graphics card Manager - said it was ok. There was no monitor icon in the list. Updated graphics driver while there and rebooted. Still no monitor. Vista restored one week before the problem - same problem. Removing graphics card and initialized using the graphics card integrated and faithful old crt screen and device manager says there is a monitor. Nvid uninstalled drivers, restarted with vista and a map nvid in loads of drivers, restarted - same problem. Bought the new 8400 graphics card and equipped - same prob. Reinstalled vista - same prob.
  There is no other program on this to clutter anything in System. At the most recent drivers, even mounted new graphics card.
  Help please.

  G ' Day Manasa P, problem solved! Unfortunately no you (not disrspect to you somehow). As I said no monitor icon in the Device Manager. Change the drivers of graphics for the standard vga drivers to fix the problem. reboot to normal. Device Manager should now list monitor. Load the drivers depending on monitor. Restart and load the drivers for the graphics card via Device Manager. reset. I hope that fixed the problem.
  Thanks for your help, realize looking at the list of problems you have hard time, trying to unravel the problems of other people. That good luck.
  Hope you can pass on my stationary and can save you time.
  Concerning
  Robert Park