missing os framedyn.dll file

Similar Questions

• Windows XP missing HAL. DLL file. CD ROM does not detect the Windows XP installation CD.

  I received the error message to the Windows startup, that I need to replace my Hal.DLL file.  I can't access a safe mode with command prompt, and CD rom does not detect the CD. I have rebuilt the Boot.INI file and still no luck. I tried to put HAL. DLL on a flash drive, but it cannot read it for some reason any. "Cannot develop"...

  Any help would be appreciated!

  Go to the store and buy an optical drive. They are very expensive. No, you cannot use the optical drive of your laptop. You can possibly create a bootable USB key with a distribution of Linux on it and copy the correct boot hard disk files. I say "may" because not all older computers can boot from a USB device. Look in your BIOS to see if your computer has this capability. If he can:

  http://www.pendrivelinux.com

  If you have not backed up your data, then you have trouble. While you're at the store also buy an external hard drive. You can start the computer with a Linux Live CD (in your new optical drive), and copy the files on the external hard drive. Then you can continue to try to repair your computer.

  MS - MVP - Elephant Boy computers - don't panic!

• Missing framedyn.dll file

  I missed this file. Can anyone help please?

  Hello

  Maybe this can help http://support.microsoft.com/kb/319114/en-us

• I seem to be missing my t8ExtPEx.dll file. Is this bad?

  I looked online and someone said it could be done, but to be careful.  Do I need it and I can get it from Microsoft?

  This is a file from a rogue toolbar

  Uninstall the toolbar entries in programs and features

  If this does help not you can try launching toolbar cleaner http://toolbarcleaner.com/
  It is a third-party program (program not associated with Microsoft)
  You are solely responsible for your interactions with any third party relating to your use of the community, or of any information or material that you get a third.
  (Have I copy the right part?)

• A certain NUMBER OF MY PROGRAMS DOES NOT WORK because WHAT I HAVE LOST A__FILE, (Framedyn.dll) was may find this file? Thank you

  THIS FILE (Framedyn.dll) is part of the curriculum that cleans up the hard drive. SYSTEM RESTORE AND A NUMBER OF OTHERS WHO WILL NOT WORK UNTIL I HAVE TO REPLACE THE LOST FILE
   
  OLDW8LIFTER
  *****@****

  Oldw8lifter,

  Welcome to the Microsoft Answers community.

  This problem may occur if one of the following conditions is met:

  ·         The %SYSTEMROOT%\System32\Wbem\framedyn.dll file is missing or damaged.

  -or-

  ·         The Windows Path environment variable does not point in % SYSTEMROOT%\System32\Wbem.

  To fix:

  Replace the Framedyn.dll file

  1. click on Startand then click run.

  2. in the Open box, type %systemroot%\system32\dllcache, and then click OK.

  3 right-click framedyn.dlland then click copy on the shortcut menu that appears.

  4. click on Startand then click run.

  5. in the Open box, type %systemroot%\system32\wbem, and then click OK.

  6. on the Edit menu, click Paste. If you are prompted to replace the existing file, click Yes.

  Check the System Variables

  1. click on Start, right-click my computerand then click Properties on the shortcut menu that appears. If you receive the following error message, click OK:

  Rundll32.exe - Unable to locate component

  This application has failed to start because framedyn.dll was not found. Reinstalling the application may fix this problem.

  2. in the System Properties dialog box, click the Advanced tab.

  3. click on Environment Variables.

  4. under System variables, click path, and then click change.

  NOTE: If no Path variable is listed, click new. In the Variable name box, type the path.

  5. in the Variable value box, type the following:

  %SystemRoot%\System32;%SystemRoot%;%SystemRoot%\System32\wbem

  6. click OK three times (whenever you can).

  I hope this helps.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• age of empirs 3 the D3Dx9_25.DLL file missing

  hope someone can understand it.

  3 hours trying to solve this problem and im top.

  When I try to start the game the error message appears ip "is missing the D3D9_25.DLL file.

  I tried to download the update to fix, I tried the installation manual and the problem persists.

  I tried to copy and paste the files associated with the program folder age empires only to get a message saying "see the DXERROR.log or DIRECT.log file.

  which is also usless.

  any help would be greatly appreciated.

  Thanks in advance,

  Krzysztof

  Hello
   
   
  Have you followed the steps in KB 910813, which was proposed by Vinod N
  http://support.Microsoft.com/kb/910813
   
   
  Let us know the status of the issue.

• Where can I find the .dll is missing from my computer files?

  Original title: slbc.dll

  I tried to install the software of the printer on my computer, but I can't because the software tells me that I need to slbc.dll, scccbase.dll, gpkcsp.dll. and Enum. Where can I find these things?

  Try the procedure described in the article below

  http://helpercomputers.WordPress.com/2010/11/05/missing-Sccbase-dllslbcsp-dll-files-for-HP-printer-install/

• How to install the missing dll files when I try to get latest microsoft updates and get the error msg ox8024D007

  I can also access my control panel, but when I try to add/REMOVE a program it says that is missing a required dll file

  You could try auto fixit or manually install the microsoft update agent.

  http://support.Microsoft.com/kb/949104

  Or refer to the knowledge base article:

  http://support.Microsoft.com/kb/956701

  Agent update for the x 86 system.

  http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x86.exe

  The updateagent for x 64-based system.

  http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x64.exe

  I hope this helps.

• missing yvfpemrj.dll file how to solve this problem?

  After reinstalling Firefox on Windows 7 Pro, I get the message that the... yvfpemrj.dll file is missing when I start the computer. Also, when I use google to search, it displays a blank page.

  It seems that your computer might be infected by a Virus (http://www.bleepingcomputer.com/forums/topic446165.html )

  I suggest the following resources:

  My Firefox problem a result of Malware is an article from the Mozilla Support with some good advice to avoid and fight against malware.

  To verify that your system is clean, perform the following steps (no official Mozilla tips, just good practices of personal experience)

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.Malwarebytes.org/

  Download and launch TDSSKiller http://support.kaspersky.com/faq/?qid=208283363

  Download and install Microsoft Security Essentials http://windows.microsoft.com/en-US/windows/products/security-essentials (no not official approval, but I personally recommend MSE as a great permanent anti-virus)

  Check all Windows updates.

  If you still have problems with Malware after that, I would recommend either http://www.bleepingcomputer.com/virus-removal/, or have your computer cleaned by a professional.

• Satellite Pro A300 - System32\hal.dll file is corrupted or missing

  I have a Toshiba Satellite Pro A300, which says that the System32\hal.dll file is missing or corrupt.

  Is it possible to repair the file by a recovery by the laptop itself, or do I have to get a copy of Windows Vista to start over and do it this way?

  Hoping to get some possible answers to what to do.

  Thanks Christian

  Hello

  I read that some discussions in different forums and in most cases the new OS installation may solve this problem. The HAL.dll in place in C:\Windows\system32 then maybe you could solve this problem in copy this file from the Vista CD in this folder

  You could start the unit by using a Live CD (linux or windows lice CD called PartBe or WinPE)
  But the easiest solution would be to the recovery procedure

• Satellite Pro L300 - missing dll. files after the installation of the printer

  Hello

  I have missing dll. files on my Pro L300.
  When I try to install my printer software it throws an error message upward.
  I now have the missing dll. files, but can't seem to install them. Someone knows what to do with them?

  I am running XP and the files are sccbase.dll slbcsp.dll

  I have listed this question before, but it has never been on the forum?

  Thank you very much

  Q

  Hello

  I searched and slbcsp.dll sccbase.dll and found someone who had the same problem after installation of the printer software.
  Check out this site:
  http://forums.CNET.com/5208-6142_102-0.html?ThreadId=275051

  Please post some feedback after you try the workaround solution posted here.
  It looks like a registry key must be changed.

  Good luck

• SA10-A103: "tpwrreg.dll" file is missing

  tpwrreg.dll file is missing when I install powersaver. No matter if I install disk powersaver or if I download the latest driver. He said the same thing when I try to install "common Modules".

  I think I have a Satellite A103. It says SA10-A103.

  Thank you very much!

  Hello

  I don t have found all the details on this file, but I guess that you install the operating system on your device manually. Without using the Toshiba Recovery CD.
  Well, it is very important that you install Toshiba stuff in the right order.
  1.) chipset utility
  Common modules 2.)
  3. display driver)
  4.) etc.

  Please also see the SP2 update news you will find on the page of the Toshiba driver.

• Windows 7 d3dx10_.dll file is missing

  Original title: WINDOWS 7. DLL FILE MISSING

  I have a problem when I run this game that an error pops up saying that my d3dx10_.dll file is missing what to do

  can any body help me

  Hey Kevindran,

  What game are you talking about?

  D3dx10.dll problems result in one way or another by a problem with Microsoft DirectX. The file d3dx10.dll is one of many files in the DirectX software collection. Because DirectX is used by most Windows-based games and graphics programs advancements, d3dx10.dll errors usually only appear when you use these programs.

  Here's what you can do to fix the error.

  1. find a DirectX installer on your game folder or installation CD or DVD. Usually, if a game uses DirectX, software developers includes a copy of DirectX on the installation disc.

  2. Uninstall the game and then reinstall it again. Something could have happened to the files in the program work with d3dx10.dll and a reinstall might do the trick.

  To get help, view the required information.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• War assault squad game gives error msvcr71.dll file is missing.

  Original title: when I installed the game and tried to play it, it says the msvcr71.dll file is missing unin.and tried kidney says the same thing

   

  get lack msvcr.dll file after installing of the men of war assault squad tried game uin then René game get even

  Hello
  1. What operating system is installed on the computer?
  2. Did you change on your computer before the show?
  3. What is the exact error message?
  Please follow the steps mentioned below:
   
  SFC scanner. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.
  Scan sfc enforcement procedure:
  a. click Start, click all programs, click Accessories, right-click command prompt and select run as administrator of .
  b. click on continue or provide administrator credentials if prompted.
  c. in the type in the following command prompt window and press ENTER:
  sfc/scannow
   
  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833

• .dll file is missing. But what?

  C:\windows\TEMP\oxtfg.dll.

  "the specified module is not found. Why this pop up when I start my computer? I understand what the .dll files, but what is this one tries to do, or what program is looking for it?

  Thank you.

  Hello

  1. what operating system is installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  Method 1: perform the scan SFC (System File Checker) and see if the problem occurs.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  Method 2: clean boot the computer and see if it helps.

  To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: follow step 7 to reset the computer to start as usual after the boot process.

   How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Follow step 4 to reset the computer to start as usual after the clean boot process

  How to configure Windows XP to start in a "clean boot" State

  Hope this information helps.