missing paint program?

Under win7 premium 64 bit on the new laptop computer. Can not find the Paint program. Not in the list of program or under the Accessories heading. Have programmed research machine for 'Paint' and Paint.exe "... 'not found '.  A machine since Nov 09. Had problems with IE and had to erase and reset user Accts... think I used Paint on this machine quite awhile, but can't find it now. Where is he?

Thank you

If you do not find the program in the start menu > Accessories, you can visit C:\Windows\system32\mspaint.exe. If it isn't there, you can go to the control panel > programs and features and install paint from there. You will probably need your Windows 7 installation media.

--

Dustin Harper
E-mail address is removed from the privacy *.
http://www.mstechpages.com  Microsoft News, support, FAQ, and much more!

"pauld430" wrote in message News: 20c53d6a-74fd-4769-82b8-9e0f5b041240...

Under win7 premium 64 bit on the new laptop computer. Can not find the Paint program. Not in the list of program or under the Accessories heading. Have programmed research machine for 'Paint' and Paint.exe "... 'not found '.  A machine since Nov 09. Had problems with IE and had to erase and reset user Accts... think I used Paint on this machine quite awhile, but can't find it now. Where is he?

Thank you

Dustin Harper * address email is removed from the privacy * http://www.mstechpages.com---aide Windows and Support Page

Tags: Windows

Similar Questions

  • Need help with the algorithm for my paint program

    I was doing a paint program with the help of a BufferedImage where the user draws to the BufferedImage and then I pull the BufferedImage class with that I extend JPanel. I want the user to be able to use a function of cancellation via ctrl + z and I also want them to update what type of paper, they write you on direct: a) b) graph paper c) double paper in white. I don't see how using BufferedImages. Is there something I'm missing, or should I do otherwise? I try to avoid the opposite effect because it seems too demanding on the computer, but if this is not feasible, then I guess I have to, but I think that I should ask you guys if what I do is logical or monstrous.

    What I intend to do, is make a LinkedList that has the following 4 parameters:
    (1) previous point
    (2) current point
    (3) current color
    (4) boolean connectPrevious

    This means that program essentially attracts the instant line using two points and the color specified in paintComponent(Graphics g). The Boolean value is ctrl + z (undo) purposes. I also intend to use a background thread to remove entries repeated in LinkedList except for the 25 latest LinkedList components (i.e. number could change in practice).

    What do you think guys?

    Any input would be greatly appreciated!
    Thanks in advance!

    Look at the package javax.swing.undo package - UndoableEdit interface and the UndoManager class.

    Everything to implement the interface. Store all the data necessary to perform your action (pixels, colours, forms etc.). Add all your UndoableEdits in an instance of the UndoManager class and call undo() redo() when you need it.

  • Why ms paint program cannot recognize a twain scanner installed in my system xp network

    I have a network twain scanner installed in my system xp but ms paint program can not recognize well some other programs like acdsee can recognize him
    I have now the reason please help me thanks

    Hello

    I suggest you to refer to this article and check if it helps:

    http://support.Microsoft.com/kb/293614

    It will be useful.

  • Cannot find the Microsoft Paint program on computer

    The paint program is not anywhere is on the computer at all, even if I'm looking for the painting in the start menu search bar. The only way I can open it is if I go to help and support. Why is this happen and how do I get that back to normal?

    If the paint will open help & support, then there clearly are on the computer.  Maybe somehow managed to delete or move the shortcut from the Start Menu?  I can't imagine how this could be done accidentally, but stranger things have happened.

    In Windows Explorer, browse to C:\WIndows\System32 folder, right-click on the file "MSPaint.exe" and select "create shortcut".  You will say that you cannot create a shortcut to this place and offers a choice of desktop space.  Once the new shortcut has been created, you can move it back to C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Accessories folder, where he usually resides.

  • Is it possible to rotate lower image, to 90o, using the Windows paint program?

    I work on the maps of dish with the paint program in Windows and need to type the text at an angle on the plan.  I need to rotate the photo 90 °.

    I work on the maps of dish with the paint program in Windows and need to type the text at an angle on the plan.  I need to rotate the photo 90 °.

    =================================
    The freeware Paint.NET might be worth a try:

    Paint.NEThttp://www.getpaint.net/

    Paint.NET Rotate / Zoomhttp://www.getpaint.net/doc/latest/en/RotateZoom.html John Inzer - MS - MVP - Digital Media Experience

  • What is a paint program

    my computer is not a "paint" program that asked me to use in order to send a SCREEN CAPTURE of my black square problem. Please notify. Thank you

    Hello netprofits,.

    A program of 'paint' allows you to edit graphics and pictures on your PC. Alternatively, in your case, save screenshots in.

    All Windows operating systems have a paint program. I suggest you try the following:

    1. click the Windows Start button

    2. on the Start Menu, click all programs

    3. in the menu all programs, click Accessories

    4. on the menu accessories look down the list of programs until you see the paint.

    5. click on paint to open the paint program.

    Take you screenshot and then paste the screenshot into paint program.

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

  • Reaching the text option to paint program?

    How I use text using the paint program? Use the program paint - how can I use the text option in tools

    Please see the relevant section of the:

    http://windows.microsoft.com/en-GB/windows-vista/Paint-tools .

    If it does not respond to your question please explain in more detail what is the problem.

  • I need to buy an older basic paint program

    I need to buy the basic paint program which has been in the batch when buying when I bought my HP Pavilion with vista operating system.  I now have a new HP Pavilion with a new basic paint program that does not work well for my needs.  The lining in the new paint program has a system of two points which is annoying.  Make a black line, you will have a white dot at the beginning and the end of your line.  You must then click on your page to get rid of the colon in order to continue the lining in another direction.  I use it all day and am so very frustrated not speak I was wondering when the carpal tunnel syndrome will set with all the clicks!  PLEASE... ANY HELP IS GREATLY APPRECIATED!  Thank you!!

    PS... I HAVE Paintshop Pro 7 and Corel Paint x 2 but they are both too powerful for my needs.

    Hi Rhonda

    Microsoft Paint is a free program which is included in all versions of Windows, it can be purchased separately.

    I understand your problem.

    Explanation: These "white spots" which appear at the end of a drawn line are called "handles" and they allow you to adjust the line after it is drawn. This is useful in case the line was not drawn straight or is to be moved. In the version of Windows 7 paint, there is not a way to remove these points, except to do what you have already described.

    Solution: There are a few users who have managed to replace the Windows 7 version of paint with an earlier version that does not display the handles.

    Note: Replacement of the system with an earlier version files are not supported by Microsoft.

    Keeping this in mind, here's a link to the discussion on this solution.

    Trying to replace Paint in Windows 7 with Windows XP Paint - Microsoft Answers:
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/trying-to-replace-Windows-7-paint-with-Windows-XP/5976f4bf-1485-4E74-9008-bda884eff914

    Let us know if that helps.

    Concerning

  • How can I measure the length of the lines written with the Paint program?

    I know that an earlier version of the painting software was able to measure the length of the lines written with the Paint program.   I don't know what version it was.   I have the Windows 7 Home Premium Version 6/1 (Build 7601 Service Pack 1, Copywright@2009.  How can I measure the length of the lines that I have the project using paint software?   Do I need to get the previous version?   How can I get?   PLEASE ANSWER!

    Hi Ralph,

    The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would really appreciate if you could answer the following questions:

    1. What is the name of the paint program?

    2 have you tried to install the software of paint in Windows 7?

    3. are you able to install it? If this is not the case, do you have an error code or message?

    4. in what version of Windows was fine paint software work?

    Please provide us with more information on the specific question to help you to fix as soon as possible.

    Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

  • Printing problems with the Paint program

    Used the Paint program for years, no problem.  Suddenly, every time I print get a very tiny copy as if it has been reduced by about 75%.  If I try to enlarge before printing, etc., it gives me anywhere between 10 and 20 white sheets before give me a very tiny copy.  I used different printers with the same result.  I love this Paint program and would like to get back to where he was.

    And the program of mystery?

  • What microsoft paint program comes with the feature in the program allowing to bend/curve a line?

    I know on XP 2000, the paint program was a lot many features like the one I'm looking for. However the default Windows 7 drawing program doesn't have the option of the curve to modify a line.

    Rgonzalez123, this could help further - http://desktoppub.about.com/od/creategraphics/ss/Draw-a-Heart-Windows-7-Paint_3.htm I think.

  • my computer deleted microsoft paint program how can I get or download a version.

    Lost or has been removed from microsoft program, need painting how to recover or to the bottom of the load.

    Please do not let your Windows version a secret.

    Is the image of the program itself missing or just the shortcut to it?  When looking for the program? Open Windows Explorer and in the address field, enter
    %WINDIR%\System32
    Press ENTER.  Looking for mspaint.exe.  Is this what?
  • How to enable missing startup programs?

    Hello

    Recently, I used windows defender and cleaned my startup program list. Since then, however, I noticed that the buttons of media between the speakers no longer work, and the touchpad no longer has its function of 'scroll '.

    How can I get the missing apps on the startup list, and where can I find them? The system doesn't restore disc seem to offer them without a complete reinstallation of windows!

    Hello

    There is a simple way how the return of these parameters.
    The Windows operating system supports the System Restore tool.
    Simply use this tool, and redefine the operating system about to time initially.

    I think it should work!

    Good bye

  • Missing startup programs, printers uninstalled and run used print spooler

    Hi guys,.

    The title really says it all.   I am running XP.
    I tried to use my scanner but it will not work properly.
    I tried to use my printer laser hp 8000 and Canon S800 deskjet.   They are more installed and when I try to install I get an error that says that the print spooler is not running.
    All programs are missing in commissioning.   If I click on programs, then I can find them.
    Any ideas?   I ran, but I'm not all that good in the first place.
    TIA
    Greg

    "Missing programs" indicate likely malware infestation.  What do you use for an antivirus application and is his current subscription?  Have you let the subscription expires?

    Start with the download, install, update and run an analysis complete with each of these tools free amtimalware.  Do not run the scans at the same time.  Each is likely to take some time, so have something else to do.

    MalwareBytes Anti-Malware
    SUPERAntiSpyware

    Now for the symptoms.

    Hidden entries in the start menu > all programs

    Beginning > menu all programs is a combination of two folders (directories) on your hard drive:

    C:\Documents and Settings\All Users Menu
    C:\Documents and Settings\\Start Menu

    If the subdirectories in one or both of the above is given to the "hidden" attribute, you will not see the corresponding entry when you click Start > all programs.  To check and fix this, right-click on the Start button and select "Open" or "Open All Users" (you should do as well until you're through).  In the window of Windows Explorer that opens, click Tools > Folder Options > view.  Click on the button "Show the hidden files and folders" and uncheck "Hide protected operating system files (recommended)."  OK your way out.

    Double-click the programs folder.  Any folder that is hidden will appear "disappear".  Right click on each hidden folder, and then select Properties.  At the bottom of the general tab, uncheck the 'hidden '.  Click OK.  Select "apply changes to this folder, subfolders and files. Click OK.  Do this for all the hidden folders.  When you are finished, go back to tools > Folder Options > view and the changes that you have made previously.

    Repeat the above by right clicking on start and select open or open all users, no matter what you is not done everything first.

    Print spooler does not and empty the folder printers and faxes

    A. Clean on print jobs pending

    • Open a command prompt window (start > run > cmd > OK)
    • Type the following in the black command prompt window, and then press ENTER after each line (don't forget the quotes)

    net stop spooler
    del/q '% windir%\system32\spool\PRINTERS\*.* '.
    net start spooler
    output

    B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on this site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

  • I have XP Professional, but can't find the MS Paint program. Where would it be?

    I need to use MS Paint and can't find it.

    Start | Programs | Accessories | Paint

Maybe you are looking for

  • Flash does not not on games

    I downloaded and installed the Adobe Flash APK file, but flash still does not work. I have a Tablet Iconia A510. I am trying to use flash on games for children - Agnitus and Zoodles, but without success. I asked Agnitus both Zoodles support, but they

  • RCG file does not open

    I can't open a rcg file please help

  • HP Mini 110 - 1026NR: the bios password reset

    Hello I have a HP Mini 110 - 1026NR I forgot the bios password. However, when I get the 3 password three times and I get a fail this code. CNU9362ZMR Can anyone help... ? I thank in advance

  • Windows 7, it goes on to say impossible to update please reboot

    * O.T. > windows 7 Hello there im trying to update the secerity on windows 7, but it keeps saying unable to update please reboot your computer all the time can you help me please?

  • WebView - Set User Agent

    Hi, I use the element Webview to integrate a Web page in my application. the site allows only the Playbook User Agent. How can I configure the user agent of the Playbook one?