Missing "run as" option of context solely on 'limited' user accounts

Similar Questions

• Error message: "cannot run from limited user account" using flight simultor 2004

  Original title: have been using flight simultor 2004 for several years, all of a sudden FS9 does not start. Windows XP - e

  use for several years, that all of a sudden FS9 does not start. error message says cannot run a restricted user account, log in as an administrator, but I am administrator and we tried to switch users without result. -any ideas please? Windows xp

  Hi Sethshaw,

  1. did you of recent changes on the system?

  You can create a new user account and check if the game works.

  How to create and configure user accounts in Windows XP

  If you are not faced with the question, you can visit the following link to resolve the damaged user account.

  How to recover damaged Windows XP user profile

  Hope this information is useful.

• When you try to use the repair your computer from the advanced boot option option, it only shows a different user account and my username and password does not work

  Original title: when you try to use the repair your computer from the advanced boot option option

  When you try to use the repair your computer from the menu option options advanced startup, when it comes to the screen to select the user account it shows only a "another" user account and my username and password does not work, and the 'OTHER' this account is not on my list of user accounts... what should I do?

  Hi kennympeek,

  1. why you try to do the Startup Repair?

  You can try to perform the commissioning of repair using the audit and the disk Installation of Windows Vista.

  For estelle information links:

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Hope this information is useful.

• How can I turn off the options to context menu for Adobe Acrobat on Windows 7?

  Hello

  I wonder if anyone can tell here:

  1. The Explorer of Windows 7, I have context menu options to "Convert to Adobe PDF" and "convert to Adobe PDF and send". Both these options ask me to choose a target file name, but when you select a file, Office 2010, I get a message about the missing PDFMaker files. Can I remove these options from popup menu?
  2. In the Explorer of Windows 7, I also have context menu option 'combine taken supported files in Acrobat. But once again, with Office 2010, this fails because "Windows can not find Acrobat.exe. Can I remove this option from context menu?

  I think anyway, there are some compatibility issues between Office and Acrobat X and I have no use for the options menu It's just clutter. I have Office 2010 32-bit.

  Thank you

  Martin O'Shea.

  I have no idea. I don't use WIn7. ShellExView is the best way to remove it. You can search in the registry. And then delete. But please make sure that you delete the entries on the right

• Apple missing music offline option?

  In my iphone, the missing of the option offline as well as the music, I had with this option. That's happened? To play my music, that I had to download part of it again. the option in offline mode is interrupted?

  No, the menu option has changed however. Look for the cloud with the arrow down. This is the new option 'make available offline '.

• A range of editing seems to be missing a few options.

  It's so weird... I'm trying to add a library by editing a set palette (following the signs linked here). However, I seem to be missing a few options, namely the possibility of changing the set... What don't get me?

  I tried 'right click' everywhere to see if there are hidden menus. So far I have not found...

  I've attached a screen shot here.
  Thanks for the help.

  So it's fun... it seems that when Labview is spawning new windows containing editible functions... they caused partially off the screen.

  According to me, who did. Thank you.

• Missing Task Manager Option

  Windows Vista Ultimate: CTL-ALT_Delete used to bring up a screen with several options, including "run Task Manager.  All of a sudden, this "Task Manager" option is no longer visible/available.  How can I get that back?

  How long have you been faced with this problem?

  Step 1: If the problem started recently, you can try to check and restore the system if this can help.
  Reference: http://windows.microsoft.com/en-US/windows-vista/What-is-System-Restore

  Step 2: Activate via Group Policy.

  Strategy Group WARNING:
  Important This section, method, or task contains steps that tell you how to modify theGroup Policy. However, serious problems can occur if you change theGroup Policy incorrectly. Therefore, make sure that you proceed with caution.

  a. click the Start button.
  b. click on run, type gpedit.msc and press ENTER.
  (c) in the left pane, click User Configuration, Administrative Templates,Systemand Options Ctrl + Alt + Delete.
  d. in the right pane, right-click on Remove Task Manager and click Properties.
  e. Select disabled or not configured , and then clickOK.
  f. close the Group Policy window.

  Step 3: Create a new user account and check if the problem persists there.

  Create a user account
  http://support.Microsoft.com/kb/279783

  If it works in a new user account, then you will need to fix the corrupted user profile. You can visit this link for the steps:
  http://support.Microsoft.com/kb/811151

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Missing HD export options for file MP4 format

  Hello

  I was wondering if someone could please give me some advice.

  I am missing the format options higher resolution export using MP4 (see screenshot).

  How can I export to 1080? Also is there anyway to change the extension to .mp4 instead of .3gp file

  Thanks in advance

  

  The "MPEG4" Adobe format uses is for old formats video mobile phone, which are pretty useless nowadays.

  You want to spend the 'Format' to 'H.264 '.  This will export one. MP4 file encoded in H.264.  There are many presets available, I would recommend starting with one of the YouTube ones specific to the resolution of the video and the pace.

• Run as pop up appears for the user account to connect to the computer

  Original title: security

  "When I turn on my computer, a smaller screen appears on the display of windows 'Run as' breast and ask which user account you want to use to run this computer", it then lists current user with a number that is similar to mine as an administrator with a checkbox. "or below cela" the following user ' to add details. I'm afraid that someone is trying to take over my computer. I have run Norton anti virus. How to stop what appears and get rid of it. This is a major threat. Paul

  Hi Paul,

  1. what anti-virus software do you use?

  2 you use the password while logging on to the user account?

  I suggest you of change the logon window and the shutdown preferences in Windows XP to resolve the problem.

  Setup configures Windows XP to use the friendly welcome logon screen and close buttons, if your computer is installed as a computer (a computer where a network domain has not been specified).

  This article describes how you can enable the classic logon screen used by Windows XP Server that resembles the following example:

  Log on to Windows

  User name: _______
  Password: __________

  To temporarily use the classic logon screen, press Ctrl + Alt + Delete twice on the Welcome logon screen.

  To configure Windows XP to use the classic logon and shutdown for each logon screens, follow these steps:

  a. click Startand then click Control Panel.
  b. double-click user accounts.
  c. click on change the way users log on or off the power.
  d. Click to uncheck the use the Welcome screen check box.

  Note: If you disable the Welcome logon screen, you also disable the fast user switching option.

  If you want users to press CTRL + ALT + DEL before the classic logon appears like a Windows XP-based computer that is joined to a domain, follow these steps:

  a. click Start, click run, type regedit in the Open box and then click OK.
  b. click the Winlogon subkey at the following registry location:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
  c. click change, click newand then click DWORD value.
  d. to change the name of the value, type DisableCADand press ENTER.
  e. keep the data value set to 0. The set of data values appear as 0x00000000 (0).

  Warning: Ask users to press CTRL + ALT + DEL before the classic logon screen appears.

  If you don't want that, then come back in a classic.

  Note: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  For reference, click on the link below:

  http://www.Microsoft.com/security/PC-security/protect-PC.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.

• What are the causes of the log of user account on missing cursor in Windows XP? I have two trays of office that they have this same problem. If you restart them the cursor returns?

  What are the causes of the log of user account on missing cursor in Windows XP? I have two trays of office that they have this same problem. If you restart them the cursor returns?

  Hi DaddyJeff,

  1. don't you make changes before the show?
  2. are you referring to the cursor in the area of user password on the login screen of Windows?
  3. when the cursor goes missing, the mouse pointer works on screen?

  It is difficult to say what is causing this problem. If the mouse pointer freezes or stops working, then we recommend you to reinstall the mouse. To do this, try the following steps:
  a. sign in to Windows.
  b. Click Start, click Run, type devmgmt.msc, and then click ok.
  c. in the list of objects, expand mice and other pointing devices.
  d. right click on the sub element and click on uninstall.
  e. unplug the mouse and plug it back.
  f. the Device Manager, select an item in the list, click the Action menu, click scan for hardware changes.
  g. check if the mouse is detected, if so, then install it.

  See mouse USB which is connected to a USB 2.0 hub is not detected by Windows XP

  
  Note: if the problem persists, restore the computer to an earlier time. See How to restore Windows XP to a previous state

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot open options feature or power user accounts.

  Story : I am running Vista Home Premium on an Acer laptop. Implementation carried out by the seller at retail in 2005. My user account allows me to act as an administrator with a command prompt. All Vista updates are installed.
  Question: I can't access the user account feature to set passwords or create multiple accounts. Most of the tools in the administrative file do not open it.
  What's happening: When I click on the user account function, a window fades quickly, but is never materialized. If I go to administrative tools and try to access the computer management console, I am prompted for approval from the admin, who I give, then get an error message indicating the MMC files are missing or I have no privileges.
  Help!

  Hello

  Click Start and type CMD, then right click on the menu entry that appears, choose "Run as Administrator". Click on continue in the UAC prompt. From the command line, run "sfc/scannow". When you are finished, close the command window and restart the machine. See if that helps. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Unable to make a selection in the context of important updates. Grayed. Open as administrator and not user account can not change to receive automatic updates

  Sign on the user account as an administrator, but cannot change the automatic updates.

  Under updates important area is grayed out and cannot select to change

  Hello Bill,

  Thank you for visiting Microsoft Community.

  As I understood it, you experience the problem, you cannot change the automatic updates even if you are logged on as an administrator user account. The option is grayed out on the system.

  Certainly, I understand your concern.

  I would suggest trying the following steps and check if that helps.

  1. Open the editor of the register of the command RUN by typing "regedit" and click OK.
  2. In the tree on the left, open following files-online HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate.
  3. Remove the automatic "Update" folder This will remove all previous settings for automatic update.
  4. Open the automatic update of the control panel and option as usual.
  5. If automatic update is always gray, type the command "gpupdate/force" RUN and click OK or restart the operating system.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Cisco VCS does not show the user account option

  Hi team,

  We have 7.2 VCS server control, I'm not able to see the option of user account under maintenance-Login accounts. Please advise.

  We don't have find me and TMS provisioing Extension service license, don't you think that's the reason.

  I just started my first deployment of VCS, MCU and TMS and I must add customer movie, cisco Jabber video for Ipad and integrtaion with CUCM. CUCM has some end points of polycom and C40 and C60.

  You precious advice will give me comfort during this deployment.

  Irfan

  BR

  Hello

  It's probably because that VCS runs in TMS PE commissioning mode, in which FindMe is managed by the portal user in TMS, meaning there is no need to set up the maintenance > logins on the VCS.

  Edit: You added information that you do not have the keys option Device Provisioning and FindMe. Because user names relate directly to FindMe, the absence of an option key FindMe would explain also unable to see maintenance > login accounts > user accounts.

  -Andreas

• Why aren't one of my user accounts or 'start' option appears there?

  On my HP laptop, which is managed by windows 7, does not show my user accounts, or the button 'start '. I can't access anything on my laptop and it still shows the bottom of the laptop for my user account options screen, but it loads up after 2-3 minutes.

  Have you tried pressing the Windows key?  This is the one to the left of the SPACEBAR between the CTRL and ALT keys  If this does not work, you should try the safe boot and checking the virus.  Get your updated antivirus program and boot into Safe Mode.  Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure.  To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.

  Good luck.

• Which user account you want to use to run this program?

  That fairly recently, when I click to start Firefox, and just before it actually opens, I has the following screen:

  "Which user account do you want to use to run this program?

  I did some internet research and it seems as if many people have encountered this same problem.

  What is the cause, is it dangerous for my computer, and how can I get rid of this message?

  Make sure that Firefox is not set to run as administrator.

  Right click on the desktop Firefox shortcut and choose "Properties".

  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  • Privilege level: "Run this program as Administrator" should not be selected
  • "Run this program in compatibility mode for:" must not be selected

  Also check the firefox.exe program properties in the program Firefox (C:\Program Files\Mozilla Firefox\) folder.