Missing Teststand VI with the new installation of Teststand/Labview

Similar Questions

• upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

  I plan to upgrade to Windows 7 64 bit Ultimate Edition with the new installation of windows XP

  my PC configuration is like below:

  Card mother Intel DH61WW
  Processor Core I3 2100 3.1 Ghz
  4 GB OF DDR3 RAM
  Seagate 1 TB SATA HARD drive
  OS: Microsoft Windows XP Professional SP3

  I run Windows 7 upgrade advisor in which some results below the incompatibilities:

  Intel (r) 6 Series / C200 Series Chipset Family SMBus Controller - 1 22
  Unknown Intel we have not the compatibility information about this device.
  Intel 82579V Gigabit Network Connection
  Unknown Intel we have not the compatibility information about this device.
  Realtek High Definition Audio
  Realtek unknown we have not the compatibility information about this device.

  Here's my conceerns:

  What needs to be done to overcome the problems of incompatibility?
  Do I need to download new software files compatible for windows 7 and then install
  for example VLC media player, Skype, MySQL Server I am running
  or currently existing files are compatible to install with Windows 7?

  Would I be able to upgrade to windows 7 without any problem and safely?

  Could you please help me with the questions above?

  Please correct me with additional suggetions that I may have missed with.

  Looking forward to hear from you

  Thank you

  You understand that you will not be able to upgrade Windows XP to Windows 7?  He will have to do a clean install.

  The Council supports Windows 7, you can get the drivers here (the chipset drivers should be the first drivers you install after installing the operating system.)

  John

• Installed new HARD drive with the new installation of XP, old HDD ShowAs saw as the active partition, how to change this?

  I installed a new HARD drive with a new installation of Windows XP Edition family. I want to keep the old HDD and reformat the drive, but I can't because the second HDD is listed as active in the management of the computer. Why? It's not the drive that contains the operating system (Windows XP) that is initialized from.  I put the BIOS such that the new HARD drive is the boot drive. The old HDD has Windows XP on it, but isn't the startup disk. I just don't understand.
  If only the new HARD drive is installed, the computer management doesn't show that it or any other of its partitions are the active partition (C drive is listed as the system partition, of course).

  How can I get an active partition and no active partition when the new HARD drive is installed on a HARD drive that is not the boot drive, when I have two hard drives installed?

  In case it is necessary, the new HARD drive is a SATA and the old HARD drive is IDE with the cavaliers as a slave.

  The system partition is the Active partition. The system volume contains the system files needed to start Windows, Windows XP, these system files are:

  NTLDR
  Boot.ini
  NTDETECT.COM
  Ntbootdd.sys (present/used only with older SCSI controllers)

  Windows files are not necessarily on the system volume, they can reside on another volume, when on a different volume this volume holding Windows files is called the boot volume.

  When you install Windows on a computer, playing a mixture of IDE and SATA setup discs tends to favor with IDE drives on SATA drives and tends to use the IDE drive to house the system partition, (even if Windows is installed on a different drive).

  Running the command SYSTEM SET at a command prompt may shed some light on the problem...

  John

• Minor problem with the New Installation of Windows 7 on my Inspiron E1705/9400 - two entries for "Base system device" under "Other devices" with yellow exclamation point

  Hello

  First of all, let me tell you about my system.   It is of a laptop Inspiron E1705/9400 with the Core 2 Duo T7400 processor clocked at 2.16 GHZ.   It has 2 GB of RAM and a hard drive on the Hitachi Travelstar nine 500 GB (7200 RPM).   It also has the GeForce Go 7900 GS video card.    Previously, it had Windows XP Professional (32 bit) and worked well.   But, I have three computers in my home and Home Office and would they work better together on my wired home network, so I'm upgrading all three to Windows 7.   My two desktops (a Dimension XPS 420 and the other Dimension XPS 430) seem like they will be no problem to upgrade to Windows 7.   But, this laptop was not on the list of Dell Windows 7 compatibility.   However, the Windows 7 Upgrade Advisor that I have downloaded and run seemed to say that it was OK to do a clean install of Windows 7 32-bit and he had only a few minor issues, where it says search the drivers updated from the manufacturer.   Initially, the laptop came with a 100 GB hard drive.   For my use, which becomes very small, so I decided to get the exact same 7200 RPM drive 500 GB size.   This will allow me to do a clean install of the 32 bit Windows 7 OS on the new hard drive and not have to wipe the old disk to do so.   I can just keep the old HD and paste it back whenever I need to get something out of it.

  So, here's my minor problem.   After the transfer of some elements off the coast of the old hard drive, I installed the new 500 GB drive and installed a cleaning of the 32-bit version of Windows 7.    I'm happy to announce that I have not had virtually no problems with installation and everything seems to work fine.   He seems a little more zippy than before and I have not met so far that doesn't seem to work.   I went through most of features and almost everything is superb.   But there is a minor problem, showing in Device Manager.   At least, I think it's a minor problem, but maybe someone can give me feedback to know if she is or not.

  In the Device Manager list, there is a category called "other devices" now and the icon shows a little white circle with an exclamation mark.    When you expand this category, you see two identical entries that say "Base system device" and the icon has a yellow circle with an exclamation mark inside.     I know from experience that it is not a good thing to see items in the device manager that have a yellow circle with an exclamation point.   I clicked on both of them and neither one really tells you what the device is, or who did what is site you would go to a driver.    On the general tab, it has the following information:

  -Device type Other devices

  Reference of the manufacturer- Unknown

                       Location     -         Bus PCI 3, device 1, function 3

  
  

  Under device status, it says the following:

                         The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information

  To find a driver for this device, click Update driver.

  Each of the entries seem to be almost the same thing... but not exactly.   The other has the location

  list PCI Bus 3, device 1, function 2... instead of function 1.   This seems to be the only difference.

  I tried the button to update the driver, but that doesn't seem to work.   No matter if you say it looks like your

  computer or to look for a new driver from the internet, it does not find anything.     As I said at the beginning,

  the system seems to work very well... but, given that I don't know what this device is or does, I might be missing something.

  He drives me crazy just have these yellow circles with exclamation point hanging out in my device manager.

  I could really use some help here.    Any ideas or help would be greatly appreciated.

  Thank you

  Bryan Ray (Richmond, WILL)

  BTW, I just downloaded and installed the driver pack from this ftp location and it worked, even for Windows 8.1 - 64 bit.

  Thanks Steve!

  Roger

• Problem with the new installation of Windows XP on the Satellite A100-259

  Hi all!

  I have a problem with the fresh install WIN XP on Satellite A100-259 (PSAA2E).
  I already deleted the partition, formatted (NTFS) and tried to reinstall from recovery disk that initially provided with the laptop. But whenever I try to install a problem is detected (for the most part it's 'page in the nonpaged area failure').

  I also tried to install the OS directly from MS Windows XP Home Edition SP2 CD - the same problem.
  I checked the partition using PQ Magic and discovered that there are ' partition table error #110 ".» So, what I did:

  (1) delete partition-> create new partition-> format (NTFS)-> reinstall from recovery disk-> has not yet;
  (2) partition delete-> install WinXP CD original by create and format partition option-> has not yet;
  (3) delete the partition (using the magic of pq)-> create partition (using the magic of pq)-> format NTFS partition for win xp option-> check partition-OK no problems don't-> installation of original win XP CD-installation without changes-> option failed even once
  (4) delete the partition (pq magic)-> create partition (pq magic)-> format NTFS partition for win xp option-> check partition-OK, no problem-> installation of the recovery disc-> has not yet

  Whenever a different error is detected, so I can't identify the problem. I don't know what to do. Does anyone have any ideas?

  Hello

  Seems that there are some problems with the standards of the partitions.
  A friend of mine has tried to install the OS on the recovery CD on the laptop that has been formatted with Partitions Magic 8 and the installation failed.
  It was very strange

  Finally, we have formatted the whole HARD drive using the CD original Windows XP Pro.
  We did not remove the partition but simply kicked this CD and after the configuration process spent, we formatted the whole HARD disk and install XP without creating all the partitions.

• j6410 over wifi is detected but not settled it on Win7 with the new installation of OJJ6400_Full_13.exe

  Dear all,

  I try to install my printer all in one HP Officejet J6410 (connected to an access point) wireless to my HP Pavilion dv5-1155eg laptop running Windows 7 Professional (ENG). I am trying to install using the new "HP Officejet Full Feature Software and Driver" (OJJ6400_Full_13.exe) for the specified printer. ""

  The rest of the HP software installation succeeded it. I am able to see the web interface of the printer from my browser. In the past, before the release of this new driver I could even print wirelessly, using the base driver provided by Win7.

  What fails is the installation of the printer itself:

  I use the software to 'Add a device' the HP that successfully locates my printer wireless in the screen "found network printers." I selects the printer, press 'Next', Network Diagnostics seems to run ok and then start the installation of the printer, it is firstly says 'printer detected... ". "but she eventually fails with the message:" printer setup is not complete - click Retry to try install again... blah blah. "

  To make richer information, I use a firewall of G Data Internet Security 2010 that I followed him and I can see that it is not blocking anything. I even tried installing with the firewall disabled, anyway...

  In addition, I tested my printer with HP Network Diagnostic Utility. The utility comes with all the information correctly (network configuration, configuration of the computer, HP printer running services, found wireless).

  Any help is appreciated to make it work because it's a major drawback, as you can understand...

  Thank you in advance...

  Thanks for the reply, but that was not the solution... As I mentioned earlier, I had tried in the first place without the firewall installation.

  But, I found a good solution to the problem, and because it might be useful to others I write it here:

  After the movie with the help of HP without success, I managed to find a workaround for the problem:

  1. I uninstalled everyhting about printer software/drivers & restarted windows.
  2. I installed the begin shape everything (the file I downloaded on the site of HP), using the USB option this time and not a wireless.
  3. RESTART WINDOWS (sucks bigtime - respect for unix/linux "reboot is for material changes!")
  4. After you have installed successfully with the USB cable, I chose the option 'Configure wireless settings' Installer extracted files resulting from the file I downloaded frrm the HP site (if after installation, the installer window is closed you will need to locate the extracted in your Temp folder files or just run the file again..). Just follow the instructions of the installer.
  5. This should make the thing! REBOOT (again) and you're ready to go!
  6. (OPTIONAL) For me, the installer actually worked at the last moment, where he stuck permanently. But that was ok, because it's stuck after you set up the printer and corresponding software. After some time, the installer came out with the usual submit an evaluation form. Just ignore it, reboot and everyhting should work. At least it did for me...

  See you soon

• Photoshop CS2 activation even issue also with the new installer.

  Adobe support team, we downloaded the Photoshop cs2 from the link http://www.Adobe.com/downloads/cs2_downloads/index.html . Per your suggestion I uninstalled the old version and install the new version and tried to activate the product. But I failed activate according to your instructions. I want to get rid of activation message. Please also let us know a what all we have to uninstall before installing fresh.

  Do you have serialized product with serial number shared KB doc himself or made use of your serial number?

  In the link KB in which Setup is shared for CS2, serial number is also shared to be used at installation time.

• Installation of Windows 7 very smooth with the new installer

  Last night, I installed Windows 7 on my NB205. I used the "Toshiba for Windows 7 Installer", which is available for download from their support site. This utility download the drivers needed and patches and automatically installs. The installation was very good. I used my NB205 all morning and everything seems fine. Even the function keys are integrated with the Flash card utility.

  I have partitioned my drive and set up a dual boot so I can still use Windows XP with an old USB TV tuner, I have, when needed. (This happened very convenient when I had a power failure during an ice storm a few years ago. Unfortunately, my laptop battery only lasted for 2 hours at a time. With the NB205 I'll be able to handle a much longer blackout).

  And then you run this file to get the downloads?

• Unable to connect to the internet with the new installation of XP Service Pack 2

  Hello.  I have an old laptop (Dell Latitude D630) that I recently reinstalled Windows XP, service pack 2.  I logged directly into my Fios modem because I can not find how to connect wireless.  When I open Internet Explorer it says that cannot display the page.

  I went to tools, Internet Options, connections and Lan settings.  There automatically detect the settings checked and that's it.  When I try to tools, Internet Options, connections and the installation program, it seems to want to set up a dial-up access.  When I go to control panel and click on network connections, it shows a 1394 connection that is connected and a firewall.  By clicking on status shows connected to 400 Mbps.  I tried to repair the connection, just in case, and it is said that he could not finish because he could not question the connection TCP/IP settings.

  Did anyone know what I can do to connect to the internet, so I can run Windows Update?

  Thank you.

  In addition to advice Xircal you need sp3, the first thing you need to do is to install the drivers for your hardware.  If what you see in network connections is an icon for an IEEE 1394 (FireWare) connection, you must at least install drivers for your Ethernet network cards and wifi.

  With the help of a computer that can connect to the Internet (for example, the one you use to post here), go to http://www.dell.com/support/my-support/us/en/555?c=us&s=biz&cs=70&l=en and enter the serial number for the laptop.   Download drivers for your Dell D630, copy to a USB flash drive (or burn to a CD) and install as shown here--> http://www.dell.com/support/troubleshooting/us/en/04/KCS/KcsArticles/ArticleView?c=us&l=en&s=gen&docid=268873

• Problems with the new installation of Windows 7 Enterprise 64 on T400

  I'm trying to do a clean install on win7 64 on my t400 (2764-CTO) ent

  I burned my drive to a .iso directly from my microsoft partner portal.  When I boot the disk, it starts and starts to copy the files.  After that, I get a small windows with a black background splash screen.  After that, all I get is a mouse with a black background.  I can move the mouse, but my Setup seems to stop there.  I do not see the occasional hard disk activity, but I can get out my drive and have no complaints, so it seems to stop the disc at this point.

  I tried to create a new cd and I have the same problem.  If I run the disk then that in my current configuration of windows, he opens the settings and will begin the upgrade to win7.  I quit because I want a clean install.

  has anyone experience this problem?

  I have re-uploaded the file image .iso last night and will try to burn a new disc from tonight and see where I get with it.  If this does not work, I will try to boot from usb, but I really prefer to do just from a dvd.  also, I tried - r and + r media with the same results.

  Thanks for any help,

  Josh

  vedman wrote:

  I burned my drive to a .iso directly from my microsoft partner portal.

  You validate the checksum on the download of the image?  I seem to have a problem any image on your DVD.

  See you soon,.

  Bill

• Windows 7 has not installed windows with the new installation games

  Hi all

  I just installed a fresh copy of Windows 7 Pro, but I noticed that no games have been installed with it (Solitare, Minesweeper, etc.). What is happening with this? Are no games included with the Pro version or have not installed? How can I get back them?

  Thank you!

  Hello.

  By default the Professional SKU does not install any games.

  You can install them yourself by clicking on start-> Control Panel-> programs-> Windows features turn on or off. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Application manager a few laps/does not - could not connect with the new installation

  Bought a perpetual license for Adobe Acrobat Professional DC and the installer downloaded from licensing.adobe.com

  No creative Cloud applications exist on Mac.

  Some versions of Adobe Reader or Acrobat Professional have never existed on this Macbook Air.

  10.10.5 running

  Installed without error.

  Launch Acrobat and Adobe Application Manager launches rather telling me that I have to sign.

  I click on the Connect button and a new "Adobe Acrobat" window appears with rotating boxes - that never cease.

  I have to force quit the Application Manager, because it becomes completely insensitive although Force Quit does not (do not) then for the name of the program.

  I uninstalled Acrobat and reinstalled but I got the same error.

  I have an internet connection then it should be able to reach the sign to the server.

  Checked the Console logs - is the thing in Adobe Acrobat Update Helper DC.log which shows that he met "errorCode 1001: received an exception when checking for product updates Acrobat update for assistance." Jump to the update of this product". Which occurred once. I force quit the Application Manager at least four times now. No crash log is written to the Console.

  Grateful for any suggestion.

  Thank you

  Hi stephanied48098632,

  3 & 4 in his App environment test solution does not open. Wheel of progress constantly calls.

  Kind regards

  Nicos

• Using backups 10g with the new installation of 11g

  Hello Forum Oracle; If I install a new copy of Oracle 11 g xe, it'll work the backup I have a 10 g xe? My APEX applications in the installation of 10g xe will be restored after a data recovery?

  Details of the OS message pl. You must export the data from 10g XE and import in 11g XE

  http://docs.Oracle.com/CD/E17781_01/install.112/e18802/TOC.htm#CIHCDCDH

  HTH
  Srini

• Help please with the new installation of windows 7 with internet

  We have two laptops, both using Windows 7 and a hub BT wireless, everything works fine, until I decided to reinstall windows. Now, with this computer, I just haven't been able to connect to the internet, even if the other laptop works very well. I'm no computer whizz and so enjoy really simple instructions on how I can connect to our BT Hub (internet).

  You will need to install your wireless adapter and Ethernet driver.

  Visit the Web site of the manufacturer for your laptop.

  Is which laptop brand and model?

• Can not see the pictures (.bmp, .jpg) with the new installation of windows 8 pro

  Just installed Windows 8 Pro 64 bit on HP laptop. At the graphics card AMD Radeon 7660. Cannot display pictures or even photos.

  http://www.thewindowsclub.com/take-ownership-Windows-8 can help. use at your own
  risk.
   
   
  ..
   
   
  Barb
   
   
  http://digitalmediaphile.com/
   
  Application Windows 8 Blog Reader of Barb connected world - http://apps.microsoft.com/windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461c-b1d5-06e54a58d298
   
  Please mark as answer if that answers your question