Missing Win7 Pro drivers for HP 255 G1 after decommissioning

Similar Questions

• Buy a Win7 Pro upgrade for my XP desktop

  Hello.  There are hordes of scam websites, selling software. Where can I reliable buy software update Win7 Pro 64-bit for my XP Pro system long loved it please?

  Thanks a lot for comprehensive advice.

  Could I ask a few more questions?

  1. where do MAR licenses match in the spectrum it please?

  Here's should only be used by authorized companies who resell the refurbished computers.

  2. under OEM.

  "you say" ","OEM licenses are bound to the first computer you install and activate it on " do you mean the old software, in this case XP or Win7 (hopefully) new?

  No, the version of Windows 7 OEM.

  You say "the OEM versions can be used to upgrade directly from an older Windows operating system" does that mean that I have to do a clean install of Win7 and can't use tools such as Windows Easy Transfer please?

  Yes, you will need to do a clean install, but you can restore a Windows Easy Transfer. MIG file. With a clean installation, settings, applications and personal files are not preserved. Please note, Windows Easy Transfer do not back up the applications, settings and personal files only.

• Snipping Tool missing (WIN7 Pro)

  Snipping Tool icon dissappeared since about a week after the purchase of the new desktop computer. Tablet PC components is checked. Research leads to no result for "capture tool.

  Would an update have deleted?

  Can I use the WIN7 pro for re installation disc - install Snipping Tool?

  Thanks in advance

  Go to C:\Windows\System32, click SnippingTool.exe and click on create a shortcut on the desktop or a PIN in the Start Menu.

• Win7 64 drivers for Pavilion g6 2330ef

  Hello

  I am looking for Win7 64 for a HP Pavilion 2330ef g6:

  -SMBUS: PCI\VEN_1022 & DEV_780B & SUBSYS_188F103C & REV_14
  -USB BUS: PCI\VEN_1022 & DEV_7812 & SUBSYS_188F103C & REV_03

  -Ethernet: PCI\VEN_10EC & DEV_8136 & SUBSYS_188F103C & REV_05

  -PCI device: PCI\VEN_10EC & DEV_5229 & SUBSYS_188F103C & REV_01

  I checked on the website of HP driver and find that the drivers for Windows 8.

  Thanks for your help!

  Hello:

  You must download and install the AMD chipset driver from the link below, the first file listed.

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx#2

  Who's going to install:

  -SMBUS: PCI\VEN_1022 & DEV_780B & SUBSYS_188F103C & REV_14
  -USB BUS: PCI\VEN_1022 & DEV_7812 & SUBSYS_188F103C & REV_03

  Then install these:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5262610&prodNameId=5275620&swEnvOID=4063&swLang=13&mode=2&taskId=135&swItem=ob-103913-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5262610&prodNameId=5275620&swEnvOID=4063&swLang=13&mode=2&taskId=135&swItem=ob-103762-1

  If you need the video driver, it should work.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=ob-112869-1&mode=4&IDX=1&prodTypeId=321957&prodSeriesId=5262610

• HP Envy H8-1534: Windows 7 Pro drivers for HP envy PC H8-1534

  So I had windows 7 on my computer as a year ago and I recently met with a pretty nasty malware and had to reinstall windows 7 on my computer drive. My problem is that I am having a hard time finding drivers for my computer. Ive found a support topic where someone else asked the same question but the solution given to them has not worked for me. If I could have a link to download the compatible drivers , it would be much appreciated. Thank you and have a nice rest of your day ok?

  Hello:

  You should be able to use all the W7 x 64 drivers and the software of this model to yours except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-HPE-H8-1200-desktop-PC-series/5187019/model/5231574

• How can I get the drivers for my aspire 3100 after that I installed windows 7

  I have a aspire 3100 that came with Vista, I installed Windows 7 and am wondering where I can get the drivers for my system updated. Acer does not list them.

  You must perform a search by yourself great web, many are available on the support page equipment manufacturers.

• Unknown Device Driver missing Win7 Pro

  Got the new HP Probook 450 G1 and then that virtually everything has worked, I have two missing drivers labeled "Unknown device" in Device Manager. Here are the details that I can share:

  General
  Location: On PCI bus

  Details:

  ACPI\HPQ6007

  * HPQ6007

  Is there something else I should share for more aid and the place where, if so?

  The second unknown device of its dialog box details:

  General:

  Location: Port_ #0001.Hub_ #0004

  Hardware ID:

  USB\VID_138A & PID_003F & REV_0104

  USB\VID_138A & PID_003F

  Thanks in advance

  Hello:

  You need these two drivers...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5405424 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_127112_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5405424 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125839_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

• Need XP Pro drivers for Presario F572US

  Compaq Presario F572US - pn: GF596UA #ABA

  Windows XP Pro 32 bit

  Am transfer to HARD drive to laptop HP G50 at the Presario F572US above

  The problem:

  A friend bought a new HP G50 laptop (2.1 GHz AMD dual core) that he bought for use to navigate his ship.  Initially, the laptop came with Vista installed on it.  It had downgraded the OS to Windows XP Pro and install the software of navigation maritime and everything worked very well.  a little more than three weeks after the expiration of the warranty of the laptop, the motherboard has failed due to overheating problems. (It started having problems with the system of random closing approximately nine months after the purchase.  HP would not replace the motherboard, so his laptop is now an anchor at best.

  I am now trying to transfer the hard drive in a Compaq Presario F572US and need all the drivers needed to accomplish the task.  When I go on the HP/Compaq driver download site, there are only five downloads of software/driver for XP.  I would like to know where to find the remaining hardware drivers to get xp working properly?

  Thank you

  disaksen

  [email protected]

  Probably the best option is to pilots from an another Presario with almost identical harware:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&OS=228&product=3180330#N519

• Missing drivers for controller PCI memory after reinstalling Vista

  I just reinstalled Win Vista and now I have 2 items listed in device with big exclamation points Manager. The first is "Mass storage controller" and the second is the "PCI memory controller".

  I have already installed the Intel drivers, what drivers do I need to get these two devices to work?

  Hello!

  First of all, what Satellite phone do you have?

  You have installed all the drivers from the Web from Toshiba site? For the PCI mass storage controller, you normally have the SATA drivers.
  If you have a European model to look at Toshiba's European site for drivers:
  http://EU.computers.Toshiba-Europe.com

  Good bye

• Satellite L870D-BT3N22 missing SM BUS drivers for Windows 7

  Dear all,

  I bought a L870D in the United States and modified in Germany - don't care anymore:

  L870D-BT3N22
  AMD A10 - 4600K (without Dual Graphics)
  2x8GB
  SSD840 120 GB

  Then I installed Windows 7 HP 64 and Device Manager shows the device SM Bus not identified, that the graphics card works as standard VGA.
  State of System Installation:
  Windows 7 installed with possible updates (especially updates .net)
  Pilot of German homepage for L870D
  -Realtek Ethernet Controller
  -Toshiba HW Monitor

  To install, I tried the following sources:
  -AMD driver standard for systems-based APU
  -Toshiba US Support Page: Windows 8 Display Driver (Windows 7 is not available)
  -Toshiba Europe support Page: AMD-Driver Windows 7 for Satellite L870D
  -Toshiba Europe support Page: Windows 7 driver for Satellite L875D (I suspect the motherboard even, L870D is not available with APU in Europe)

  Now I don't know, what else to try. Still, I uninstalled the driver and tried again. Does anyone have an idea what to try?

  Supplementary question: anyone have an idea how to replace the U.S. keyboard by a German with the extension kyrillic / where available?

  Thank you for your answers and best regards

  Georg

  > Another question: anyone have an idea how to replace the U.S. keyboard by a German with the extension kyrillic / where available?

  You should check out ebay or you can contact a Toshiba authorized in Germany service.
  They could provide a compatible keyboard.

  Regarding the unknown device / lack of driver.
  You should first check the Vendor ID and the device of this Bus SM device ID in Device Manager.
  Here is a detailed instruction:
  http://APS2.toshiba-tro.de/KB0/HTD0302U00000R01.htm

  Knowing the VEN ID and ID DEV helps you find the right driver.

• Drivers for my HP N208TX after installing w7 32 bit os... Please help!

  WiFi controller, Ethernet controller, Bluetooth controller, Nvidia GPu not detected by my HP N208TX after installing w7 32 bit os... Please help

  Hello:

  First install the Intel chipset driver and restart.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+installation+utility&lang=eng

  Then, install the Intel HD graphics driver and restart.

  https://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23885&lang=eng&OSVersion=Windows%207%20(64-bit) * & DownloadType =

  Then, install the graphics driver nvidia and restart.

  http://www.nvidia.com/download/driverResults.aspx/75994/en-us

  Ethernet: Download and install the 3rd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  In order for me to post the links to wireless and bluetooth drivers, follow these steps...

  Go to Device Manager, find the other devices category, click the network controller needing drivers.

  Then click on the Details tab in the upper part of the window network controller.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  Drop down on it and select the second item in the list (Hardware ID).

  After the first string of characters that start with PCI\VEN.

• I have a Dell Inspiron 1525 and I need drivers for Base system device after installing Win 7.

  My laptop used to have Vista on it.  I had a big problem with it, so I used fdisk to remove all partitions.  I made an installation FULL of Windows 7 and all is great, but when I go into Device Manager, I show an error with the Base system device.  I did all the updates through Windows Update, as well as update the driver.  Nothing has worked.  Can someone help me with this please.

  According to Dell, your machine has been tested for the basci feature and should work ok...

  http://support.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=7AD62F253414AF5CE040AE0AB8E1492E&docid=364750 Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• Win7 drivers for 15-n019wm

  I removed win8 hard drive, installed the new hard drive and win7, need drivers for the components of the system. I found the bus sm, controller hetwork, built in cam, still need for recognition of devices pci controller usb etc. Probably the sd card reader not regognized by the pci bus. In any case, I pbobably need for the mobo chipset drivers to complete the downgrade. Thank you

  Hello:

  For USB, you need these 2;

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118744_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Card reader:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_125075_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Drivers for a HP Pavilion dv6648SE

  Hello, I need to find the Windows XP Pro drivers for this laptop, but on the web page for this product, there is none.

  You know where I can find them?

  Hello:

  Please see the XP downgrade guide at the link below:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/General-XP-downgrade-Guide-for-HP-laptops/TD-p/83267

  Your downgrade guide tips are under the section titled models moderate (that is moderately difficult to demote).

  Paul

• Windows Update breaks Win7 pro: update from yesterday broke the opening of session Ctrl + Alt + Delete on Win7 pro machines

  Help!

  HP EliteOne 800, configured raid1, Win7 pro 64-bit

  When restarting after updating Windows from yesterday, raid reports 'check' in the BIOS, Windows starts normally then Ctrl + Alt + Delete screen system does not authenticate the we.

  Screen goes black with the mouse cursor and sits there.

  This affects 40 PCs.

  Please advise possible course of action.

  Hello

  Thanks for posting your question on the Microsoft community.

  The question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet forums.

  TechNet Forum
  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpro

  Thank you