Mix 2104XP and 2204XP

Similar Questions

• Where can I find addons of Tab Mix Plus and Adblock Plus _signed_?

  Where can I find addons of Tab Mix Plus and Adblock Plus _signed_?

  
  

• https without mixed content and EV cert site is shown as mixed and not as himself

  My https:orderform site page contains only images of https and the site has an EV cert which is valid and up-to-date. With history cleared page and visit for the first time that Firefox reports this page contains mixed content and that the site does not identify iteself.

  Pressing F5 to refresh the page address bar correctly shows green with no mixed content popup and that diversity side himself.
  SSLCertificateChainFile was added, and it makes no difference.
  Problem does not occur in other browsers (IE, Safari, Chrome).
  A new FF profile has been attempted, but same problem occurs.

  Why is refreshing the page work?

  Problem in all browsers firefox 3.5 to 14.01. I don't know about those < 3.5.

  I have read and tried most of the suggestions in the forum and elsewhere, but can't find a solution.

  I have not provided the url because it is my order page and it is important for me to see from real visitors.

  First of all thank you for your comments jscher2000

  I thought I had fixed it, but I had to clear the history and turn off the computer for a few more minutes for the error reappear.
  Well it turns out that this was not the difference between the direct replacement and replace().
  However this worked.

  If (xFf) setTimeout (function () {top.location.href = "https://ord.html"}, 300);

  Thus allowing any javascript code following (pending) to finish as suggested.
  I came to the same conclusion before reading your comments.

  WORKS NOW

  However the redirection on the server is a more robust solution.

• How to play stereo mix music and sing in my microphone at the same time?

  Hi guys, need help with Realtek HD audio driver

  I want to play stereo mix music and sing in my microphone at the same time... not for registration but in chat room, say.

  I'm using XP... Toshiba Satellite S4747 laptop
  In the Realtek software "Realtek HD audio input" microphone and two stereo mix... but I can only select one at a time...

  All solutions please thxxxx

  On a different note... a friend of mine using a non-Toshiba laptop with win XP has an older version of the Realtek audio driver and select the mic and stereo mix at the same time... I downloaded this version in my laptop, but still, I can choose only one at a time...

  Check that the audio settings of Windows and don t forget in the Realtek HD audio Manager. You can find it in the control panel.

  I think that your microphone is on Mute check so this.

• Cannot move tabs if the TWO Helper tab Multiple Tab Mix more AND is active since Firefox 49 update.

  The tabs can not be rearranged. Operations tab dragging with the mouse, but the remaining space and the tabs do more mix to make room. Arrow placement does not appear. By releasing, the tab appears to the vacant place that it comes.

  Problem when Firefox updated to 49. Even on two different computers with Vista and Windows 7. If I disable tab Mix Plus, or Multiple Tab Handler, drag the tabs normally. (Both were working together before, for years).

  I does no change in settings on computers option. I have not installed the new modules. He might have 49.0.1 when it first 'broken' and is always the same with 49.0.2.

  I never had the shift + click and ctrl-click configured such as recommended; but I also tried and it did not help. (I put them for MTH to control, now, I have them set as recommended with TMP controlling selections).

  Has anyone else using these two extensions encountered this? Should I report it to the author (s)? Or somewhere else? This is my first post, in the corner right/better?

  Thank you very much, Mr KL

  There is a report of "Issues" opened here on this specific issue. https://github.com/piroor/multipletab/issues/139

  And TabMix Plus has a forum of support here: http://tabmixplus.org/forum/ peek into "Problems & Questions" did not show a thread on this problem. https://BitBucket.org/onemen/TabMixPlus/issues Nothing is.

  Make sure that the two extensions are the absolute latest versions of 'Libération'. Multiple Tab Handler 0.8.2016090602 Tab Mix Plus 0.5.0.1

• Mixing 32GB and 16 GB memory on the T630

  Can I mix 2 32 GB DELL A8711888 with 2 DELL A8711887, DELL SNPHNDJ7C/16 G 16 GB

  32 GB RDIMMS, 2400MT/s, Dual Rank x 4 width of data (Organization of chips X 4)

  16GB RDIMMS, 2400MT/s, Dual Rank x 8 width of data (Organization of chips X 8)

  Thank you

  It would be a bar of memory 32 GB in A1 and B1, then a 16 GB DIMMs in A2 and B2.

• You can mix SAS and SATA drives in a RAID 1 PowerEdge T110 II configuration

  Hello

  I have a RAID 1 configuration and one of the two drives in the array has failed.  I've removed and replaced by another drive hoping the Dell Perc adapter H200 would rebuild the mirror automatically, but it does not.  In Server Admin OpenManage virtual disk displays as degraded.  The issue I think may be the replacement drive is SATA where the original was SAS.

  Is there a way you can make the adapter accepts a SATA drive or is it simply not supported?

  SIV

  Hello.

  Dell controllers, including the H200 are not supported mixing SAS, SATA or SSD in the same table. They may, however, each separately constitute a virtual disk on the same controller. Consider replacing the disk failing another identical or higher capacity SAS drive.

• My photos and music libraries are mixed up and can be arranged

  I wanted to improve the performance of my computer to defragment my hard drive. After that I did, my photos and music mГЄlГ. I tried to put all the music in the music library and all the photos in the photo library of the way they were before, but they keep automatically mix up. My picture library has 5 sites, video library has 3 sites, almost all my photos and music are doubled in all three libraries: Photos, music and videos. How to organize my files?

  Hello... I would like to start by opening 'explorer' and in the highlight of the left (navigation) pane 'Libraries' right-click and select "restore default libraries." After that, they're still a mess libraries may need to rebuild, but one step at a time... Ric.

• MOVI with Mix AD and LDAP authentication?

  Hi all

  Is it possible to configure VCS for authentication in mode mix MOVI.

  I have a situation in which some MOVI users are not in the ad.

  Now I woul like authenticate this MOVI via the local ldap on the highway-VCS database.

  Because I put all subarea them and area on the VCS-E with "verify the credentials" and authenticate the user MOVI via AD, works fine, no problem, but now I have the problem with the no user AD Movi.

  Anbody has any idea?

  any input appreciated.

  Best regards

  Georg

  Hi, George,

  It is possible but you need to use 2 separate VCS - C to do, where VCS - 1 c is attached to the AD domain and configured for NTLM for Video Movi/Jabber authentication requests for commissioning, and where the other VCS - C is configured to use the authentication of local/LDAP database for Video Movi/Jabber provisioning requests.

  In addition, you need to create two separate records in MSD Provisioning directory, where a single folder houses users of the AD and the other folder is home users not AD.

  Finally, you must configure the server setting internal on video Movi/Jabber, so that the AD users get their configuration in the VCS - C service which is configured for NTLM, while users non AD get their provisioning for the non - NTLM VCS - C configuration.

  Now, if you bring a VCS-E in the mixture, so that the two AD and no AD users will be connecting via VCS-E, this will get a lot more complicated, since you would have to somehow ensure that provisioning a user AD request gets by proxy via NTLM - activated VCS - c while queries for configuration of users not AD get by proxy through the non - NTLM VCS - C. This could be done with smart search rules, but that requires that you have a URI scheme for your users to provisioning, which allows you to determine whether or not a request for service comes from a user AD.

  In summary, it is possible, but it adds a significant administrative burden and would probably complicate troubleshooting a bit if it is still necessary and I strongly suggest you try instead of getting all the user provisioning in AD if possible.

  Concerning

  Andreas

• Mixed keys and malfunction general blackBerry smartphones? What is going on?! It's like witchcraft!

  I have a Blackberry 8900; It works fine and dandy until our days. I recently had it charged the day before, and like I said, it worked very well.

  Finally, almost. About 4 hours; He went completely haywire. I tried pressing the menu button and it has a pop up for less than a second and then return to the home screen.

  Later, I tried again. This time the menu screen remained, but whenever I tried to go back to the home screen it went for less than a second and then returned.

  I did a hard reset; take out the battery for a minute and then put it again.

  It worked!

  Except my phone began to compose "Farzad" out of the blue when nobody was not touch.

  Then, as I tried to get him to stop, it was as if all the keys were mixed? The button menu nothing, by pressing the keys have anythingdone. Did nothing.

  I left alone, did another hard reset, and this time I either. It then turned off his own and now it is on the charger and I'm too scared to touch.

  Nobody knows what the hell just happened? I just enter the Bermuda Triangle?

  Thank you.

  This looks like what I've seen several times on a device with moisture damage.
  Even sitting on a countertop bath during a hot steamy shower or bath can cause problems with keyboard and trackball up to this JUST-withered. Really, it is more common than you think.
  1 the battery immediately! Do not turn on your BlackBerry device.
  2. allow the device to dry in a warm, dry place for 3 to 5 days * (see below)
  3. DO NOT "check it every day" by placing the battery in. Leave what would to dry completely. It takes time. Replacing the battery to check it can damage only (humidity + power = disaster).
  4. If the unit is hot after the drying period, let it cool to room temperature before placing the battery in the.

  Suggestions on your BlackBerry in a warm dry place (open, with battery):
  * Place the BB in a container of rice uncooked dry, and then you can also place it in one of the locations mentioned below.
  * On top of any heat dry emitting electronic components: TV or CRT, LCD, TV cable box / Satellite or plasma monitor
  * On the dashboard of your car on a day sunny

• SAS/SATA mixed pool and initial data placement

  Assuming that I have a mixed pool of SAS and SATA drives, where new written land?  My concern is that Scripture arrive on SAS and SATA also and then over time the SATA data would be transferred to SAS has high performance and data on SAS are cold it shifts to SATA.

  I'm leaning toward a configuration that initially all written in SAS assuming it must be efficient and then over time, move down to SATA.  It seems that this is possible.

  I am looking for clarification and perhaps a document that could help me understand how to set up my table for everythying lands on fast and down to slow down over time.

  It does not work like that.    When you have several members in the same pool, the data is distributed across members in proportion to their relative sizes.   So more data on the volume will reside on the SATA member since he will be probably larger disks.   This is especially true is the SAS is R10 and SATA R50/R6.   Which is pretty common.

  In the 5.2.x, firmware if berries are very busy most of the time, the balancer will swap blocks filled with blocks of idle until they members have better balanced latency.  Short term transitional IO load balancer will only be active often.

  You can set preferences RAID in volume, if the members are at different levels.

  You can bind a volume to a member of the one.

  However, the best thing is to start with the group with SANHQ monitor.  This will help you find what type of i/o load you put on the group.   In addition, if you open a support account sometimes this data is also valuable to support.

• Photoshop Mix uninstall and reinstall

  There are some problems between Photoshop Mix and my libraries in creative cloud.  It will be not sent to the library of Creative Cloud Indesign.

  What happens if I uninstall and re - load again.  I will lose all these compositions?

  Thank you

  Update: Susan fixed this problem by uninstalling and reinstalling the application.

• Warp mix stabilizer and framework?

  Hi, I am working with DSLR 1920 to 80% of the material. I have a Warp stabilizer directly on the video layer to remove som earthquakes and I have interpolation enabled to remove the troubles of the slow movement, but when I visited the clip does not apply frame blending. When I remove the stabilizer of warp and make the mixture of framework applies and everything looks good and nice except the fragility, the stabilizer of the chain and the frame mix conflict in some way or I just hurt?

  Thank you!

  I just hurt?

  Yes. Before dialing the stabilization, then slow down.

  Mylenium

• Why would I not mix RGB and text colors using Gamma 1.00?

  Forms and text are slicked visibly better with the parameters of fusion in the section controls advanced settings color defined as follows:

  

  For example, consider the appearance of the edges of this text and the circular shape layer in a clear with these settings vs sRGB document:

  Defined as above:

  

  Authorized:

  

  The difference is subtle, but important in my opinion, marking the difference between good quality and good quality.  You can see the difference in the partial shading pixels at the edges curved in this enlargement of a part of the foregoing:

  

  So my question is this:

  Is there a reason that I would not only set the values above and use them all the time?

  I fully understand the concepts of gamma and post-pixel (and I think it's awesome that Photoshop has this feature), but I ask this question here because there may be of the subtleties of how Photoshop uses these settings, I'm not aware of and in particular that they are NOT defined in this way by default with Photoshop CS6.

  -Christmas

  Mix with gamma 1.0 will be slower and may lose precision (quantification).

  Mix with gamma 1.0 will make existing documents, or documents from other users look different.

  Most users should not change the settings.

  Some users who work with third party software which only works in gamma 1.0 may need change settings, and some researchers may need to change the settings for their work.

  Mixture of text using gamma 1.0 will not look correct.

  Text anti-aliasing is still more an art than a science. (and this is why there is always a setting for her)

  The gamma setting for text in CS6 mixture will result in glyphs appearing on weight even when light on dark and dark on light and different positions compared to the pixel grid.  Gamma 2.2 made dark light too fat and light on dark too thin. Gamma 1.0 makes dark on clear too thin and light on the darkness too fat.  The two extremes are glyphs seems to change shape when it is positioned in different phases compared to the pixel grid.

• Can I mix SAS and SSD drives? PE2900

  Please forgive my ignorance; I've looked through the documentation but can't find the info I'm after.

  I have a PE2900; When we look at the config online I see comes with:

  GT281 1 Assembly, map, PERC5I, Serial Attached SCSI, 2900
   
  and SAS 15 k of the 4x146Gb discs.
   
  I want to mirror 2 drives SSD for the OS. I have the 1 x 8 SAS backplane with two cables between the 5 / I at the bottom of basket... I guess I have to buy a spare sata cable sas to replace the 2nd cable and to find carriers that contains the ssd?
   
  Is it possible on this machine?  All the world does? If so, how can I find the correct carrier? I can not chat w/dell as this system is way out of warranty and the store "parts & updates" is a joke.
   
  Thank you!

  Hello wilddoktor

  The PERC 5 / I do not officially SSD support, but it will probably work. PERC 6 is the first controller to SATA SSD support and the H700 supports SATA and SAS SSD.

  I would recommend that you try SATA SSD. In addition, none of our controllers support mix of technologies of discs in the same container/table, then you will probably not be able to put the SSD in the same table as non - SSD.

  Create a RAID 1 with SSD 2xSATA would probably work, and you should be able to keep your another Bay of SAS drives on the same controller. I only am not able to give a definite answer since SSD was not taken in charge with this controller, but maybe there is someone who has tested that sounds in.

  Thank you