Mix of traditional and interactive reports fails the process of RESETTING of PAGINATION.

Similar Questions

• The speaker volume in the computer sound control mixer is up and works well with the speakers, but with headphones, I can hardly hear.

  Original title: the headphone volume

  How can I activate the volume for headphones? the speaker volume in the computer sound control mixer is up and works well with the speakers, but with the headdphones that I can barely hear

  Hello
   
  1. who is the operating system installed on the computer?
  2. What is the brand and model of headphones?
  3A this works much earlier?
  4. What is the brand and model of the sound card?
  5. have you ever tried to play the Audio using different media player applications and check?
  6. have you tried to connect the headset to another computer or phone and check if it works well?
   
  I suggest you follow these methods and check.
  Method 1: Run the audio troubleshooter.
  Open the Audio http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter playing convenience store
   
  Method 2: Set the earpiece/microphone as default device and check.
   
  a. right click on the volume icon in the system tray at the right corner on the desktop.
  b. Select the playback device, go to torecording tab.
  c. make a right click and headphone/microphone as the default device.
  d. click on apply and ok.
   
  If above steps fails, proceed to method 3.
   
  Method 3: I suggest to disable the improvements and check.
   
  a. right-click on the icon "speaker" at the bottom right of the screen.
  b. Select "playback devices".
  c. right-click on the helmet.
  d. Select Properties
  e. click improvements
  f. check Disable all improvements
  g. click OK
   
  You can read this article for more information:
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems  
  
  You can also contact the manufacturer of headphones and check.
   
  I hope this helps!

• Is - this too ambitious? Tabular no-show with interactive report in the subregion, showing the latest entries.

  Is this too much to expect in Apex 5.01?

  I have an application which records people entering an area.

  The idea is to scan badges and save time and the date of that entry.

  This is accomplished with a simple form based on the table of the newspaper.

  In a subregion of the form, I would have an interactive report that shows to all those who have entered sort by date and time entry descendant who visited today is obvious.

  I join the attendant to be able to use the interactive report to be able to select a particular line that could be recovered and placed in the main form to change (a bit like the model of interactive report with a link to a form where updates can be made.)

  I can create the report form and the subregion and that seems to work very well for journal entries, but I don't have a clue as to how I would go on the use of the report for access to update data in the form section.

  I would be eternally grateful if someone could point me in the right direction!

  Is this something that is hard to do in Apex?

  Thank you!

  Mason

  Masong says:

  Is this too much to expect in Apex 5.01?

  I have an application which records people entering an area.

  The idea is to scan badges and save time and the date of that entry.

  This is accomplished with a simple form based on the table of the newspaper.

  In a subregion of the form, I would have an interactive report that shows to all those who have entered sort by date and time entry descendant who visited today is obvious.

  I join the attendant to be able to use the interactive report to be able to select a particular line that could be recovered and placed in the main form to change (a bit like the model of interactive report with a link to a form where updates can be made.)

  I can create the report form and the subregion and that seems to work very well for journal entries, but I don't have a clue as to how I would go on the use of the report for access to update data in the form section.

  I would be eternally grateful if someone could point me in the right direction!

  Is this something that is hard to do in Apex?

  Not at all. Try to use the wizard to create a Page to create a form on a Table with report based on the table of the newspaper (choose Normal for page mode and Interactive for the implementation of the report). When finished, separate report and pages of form will have been generated. Go to the report page and copy the region interactive report on the page of the form. The report page can then be deleted if it is not required.

• How to move the form of interactive report on the left side to the right?

  the Apex 4:
  I write application in Hebrew, so I need to put in the page template dir = "RTL".
  all report and button and point moving to the right, but
  the stay of interactive report on the left side of the page (instead of right).
  
  Does anyone have an idea how to change the location?
  
  Thank you
  Return on investment

  Hello

  For the research on the copy of the side section right hand following the report in your HTML page header is on.

  Graham

• BI publisher and interactive report

  My shop has recently installed BI publisher (10.1.3) to improve printing report apex v4.
  After my initial tests, it seeems the report print report regular sql out of the box. But I can't find a way to print interactive reports with total, County, subtoal... It is possilble to create an interactive report at the apex and appeal of printing that can use the power of the editor of BI? In other words, we are looking for printed materials "you get what you see" but not a cleaning of the screen.
  
  Can you help me? Thank you very much
  
  
  
  Munshar

  To generate a report of IR in PDF format, you must do so using FOP. I don't think you can use BI Publisher at all if you use an interactive report...

  Thank you

  Tony Miller
  Webster, TX

  There are two types of pedestrians - the living and the dead.

  If you answer this question, please mark the thread as closed and give points where won...

• Bug? Interactive report includes the column excluded research

  Apex 3.1
  
  I've created an interactive report with a query that includes a 'expensive' column (a function call). To improve performance, I want to exclude this search/filter column.
  
  I unchecked everything under "allow users to"... (filter) on the column attributes page. The column is no longer in the drop-down list under the microscope in the interactive report, but the column ("element_groups" in my example below) is always included in the SQL that is generated when the user makes a search via the "All columns" option (default):
  

  select 
         "CMPCODE",
         "CODE",
         "NAME",
         "SNAME",
         "ACCOUNTTYPE",
         "ELEMENT_GROUPS",
         count(*) over () as apxws_row_cnt
   from (
  select  *  from (
  select ae.cmpcode, ae.code, ae.name, ae.sname, ae.accounttype,
    string_util_pkg.join_str (cursor(select distinct grpcode from accounting_element_group where cmpcode = ae.cmpcode and code = ae.code order by 1), ',') as element_groups
  from accounting_element ae
  where ae.elmlevel = :p852_elmlevel
  )  r
  where ((instr(upper("CMPCODE"),upper(:APXWS_SEARCH_STRING_1)) > 0
      or instr(upper("CODE"),upper(:APXWS_SEARCH_STRING_1)) > 0
      or instr(upper("NAME"),upper(:APXWS_SEARCH_STRING_1)) > 0
      or instr(upper("SNAME"),upper(:APXWS_SEARCH_STRING_1)) > 0
      or instr(upper("ACCOUNTTYPE"),upper(:APXWS_SEARCH_STRING_1)) > 0
      or instr(upper("ELEMENT_GROUPS"),upper(:APXWS_SEARCH_STRING_1)) > 0
  ))
  ) r where rownum <= to_number(:APXWS_MAX_ROW_CNT) 
   order by "CMPCODE","NAME","CODE"

  In my view, the column should be excluded from "All columns" research when the column was set to prevent the user from filtering on it.
  
  The same problem is reported here: interactive - report no research on all columns
  
  Is this a bug? Fixed some 3.2 Apex? Apex 4? No work around?
  
  -Morten
  
  http://ORA-00001.blogspot.com

  Hello

  Yes, it is a known problem.
  It seems that it is fixed on the Apex 4.0.2.00.06
  http://www.Oracle.com/technetwork/developer-tools/Apex/application-express/402-patch-189110.html#CHDIHDIB

  Kind regards
  Jari

• Export and interactive report totals

  Hi all
  
  I tried to get the totals on the basis of an interactive report, but the only way I can find is to make it as aggregations and save it as the default report.
  
  The problem is when users download the report totals are missing, is it possible to have the total number, displayed and downloaded with an interactive report?
  
  Apex to 3.1
  
  Thank you
  
  Graham

  totally different approach would be to add totals to your choice.

  It works for some already very well grouped queries
  Something like

  select e.departmentid, d.name, count(*) emp#, avg(e.salary) sal
  from employees e
  join departments d on d.departmentid = e.departmentid
  group by e.departmentid, d.name 
  

  Displays the number of employees and the salaray average for each Department.
  Now we can add a total row using rollup, or grouping sets

  select e.departmentid,  d.name, count(*) emp#, avg(e.salary) sal
  from employees e
  join departments d on d.departmentid = e.departmentid
  group by grouping sets ((e.departmentid, d.name), ());
  

• paging and interactive report

  Hello!
  
  is it possible to change the default number of lines for paging in an interactive report? the default value is 15 and I need 30 or something like that. in a normal report, it is not a problem!
  
  THX!
  
  Bye,.
  Christian

  Hello

  Yes, you can set the value by running the report as a developer. Set the rows to the value that you want to save the report, and then choose Save as default settings. Then, when any user running the report, the values will be that you have saved will be used.

  Concerning

  Paul

• sorting and interactive report

  Is it possible to have an interactive report but hide some columns in the action area. If users take to sort?
  
  Ex: created an interactive reports from the tables. There are columns with large text tabled. I would like users to sort on them for fear of perfomance hit. However, must these fields show on the report. Is it possible? All suggestions will be grateful.

  When you change a column in an interactive report

  Click on the interactive report
  Click on the column name

  In the column definition area, you can pick stocks, you allow the user to make on this column
  Allow users to:
  Charter of calculating overall sorting filter control Break

• The column titles and interactive reports

  I noticed that when you create an interactive report (IR) with a name such as "PEI", when the IR is displayed, it comes out as "Pei". Short change this manually for all names of columns like this, is there a way to prevent the IR to make this 'conversion '. Other columns such as 'DOCUMENT ID' out like 'Document Id'. I really don't want to do this to the column titles, as acronyms that I want to appear as entirely in capital letters.

  Use custom column names... Cape of init is default IR

• Interactive report with the hierarchy

  Hello

  In Apex Oracle 5.1, I tried to use an interactive report to view details of employee based on a hierarchy. I used the query to display data below:

  SELECT last_name, employe_id, manager_id, LEVEL

  Employees

  START WITH employee_id = 100

  CONNECT BY PRIOR employee_id = manager_id

  Brothers and SŒURS of ORDER BY last_name;

  The output was as below:

  LAST_NAME EMPLOYEE_ID MANAGER_ID LEVEL

  ------------------------- ----------- ---------- ----------

  King                                100                                                       1

  Cambrault                        148                                 100                 2

  Bates                              172                                 148                 3

  Bloom                             169                                  148                3

  Fox                                 170                                  148                3

  Kumar                             173                                  148                3

  Ozer                                168                                  148               3

  Smith                               171                                  148              3

  De Haan                           102                                   100             2

  Hunold                              103                                   102             3

  Austin                               105                                   103             4

  Ernst                                 104                                   103             4

  Lorentz                              107                                   103             4

  Pataballa                           106                                    103            4

  Errazuriz                           147                                   100              2

  Ande                                 166                                    147             3

  Banda                               167                                     147             3

  ...

  Now, I would like to display data based on the connection of employees.

  For example (based on above request): If an employee named - Cambrault is the login, only employees under him (Bates, Bloom, Fox, Kumar, Smith, Ozer) and its own contact information should appear in the report.

  Please advise.

  Kind regards

  mebu

  Mebu wrote:

  Please take a look on the underside of the employees table, employee_id here will be used as a unique identifier for each lines and names of the connection will be with these employe_id. single sign on Option will be used for login purposes.

  Really?

  SQL > SELECT last_name, employe_id, manager_id, LEVEL

  2 FROM employees

  3 START WITH employee_id = to_number(:app_user)

  4 CONNECT BY PRIOR employee_id = manager_id

  5 brothers and SŒURS of ORDER BY last_name;

  LAST_NAME EMPLOYEE_ID MANAGER_ID LEVEL

  ------------------------- ----------- ---------- ----------

  Cambrault 148 100 1

  Bates 172 148 2

  Flowers 2 148 169

  Fox                              170        148          2

  Kumar 173 148 2

  Ozer                             168        148          2

  Smith, 2 148 171

• view an interactive report at the click of a button

  Hello

  I interactive reports in which I want to dynamically show on click of a button, I put a condition report on request = Expression 1 and in the Expression, I gave the name of the button, but the report does not show even when the button is clicked, or this isn't when the page loads.

  Any guidance will be of great help.

  Thank you

  Rakesh

  HI Rakesh,

  Rakesh119-Oracle wrote:

  Hello

  I interactive reports in which I want to dynamically show on click of a button, I put a condition report on request = Expression 1 and in the Expression, I gave the name of the button, but the report does not show even when the button is clicked, or this isn't when the page loads.

  Any guidance will be of great help.

  Thank you

  Rakesh

  In addition to this all you have done.

  Create a branch and redirect to the same page

  Branch point: on Submit (after Computation, valdation and processing)

  Target type: Page of this application.

  Page: same page where you have the report.

  Request: Button name (what you have given in expression1 in the condition of report)

  When button: click on the button that you want to view report

  Hope this helps you,

  Kind regards

  Jitendra

• To create an interactive report in the apex by selecting from multiple tables

  Hi, I am creating an interactive report by selecting from multiple tables.

  SELECT w.FIRST_NAME as name, w.SURNAME as name, i.ROAD Road, i.DATE_OF_INC as DATE_OF_INC, S.STATEMENT as a STATEMENT OF Declaration

  JOIN THE

  WITNESS w

  ON w.witness_id = s.FK1_WITNESS_ID

  JOIN THE

  Incident I have

  WE

  i.incident_no = w.FK1_INCIDENT_NO

  JOIN THE

  user_station ps

  ON ps.station_id = i.nearest_station_id

  JOIN THE

  the user in.

  WE

  in. STATION_ID = ps.station_id

  WHERE po.officer_id = 1

  by I continue to encounter this error "the report query requires a unique key to identify each row. The supplied key cannot be used for this query. Please change the report attributes to define a unique key column. "ORA-01445: cannot select ROWID from where sample, a join without key preserved table view '

  So I googled around and found that in the attibutres tables report, I need to change the "LINK" COLUMN so first, I changed "Link to custom target", but the report is so I changed it to "Exclude link Clolumn" again, the report didn't report and I STILL got a blank page with only the tabs.

  I wonder you can not create a report by selecting from multiple tables?

  If you can please I need your help.

  Thank you

  You can, but in this case, it might be easier to build your report tables that are joined Oracle views and then build your report out of the newly built sight...

  Or wrap a selection around your selection with joins, and then make the where clause on the external selection...

  Thank you

  Tony Miller
  Software LuvMuffin
  Ruckersville, WILL

• patterns of authentication and interactive reports

  Hello

  I have 2 groups of users with different levels of security access, so I need to restrict certain data in the interactive report. I want to create 1 report with all data and 1 report that excludes certain documents based on one of the fields. Can I do this using an authentication scheme? Can someone direct me to some good instructions on how to do this? I'm open to other suggestions as well.

  I have another thread on that as well, but I wonder about another method (limitation of access to the records in interactive report), hoping that it will be a little easier.

  Thank you!

  Rachel PRO wrote:

  I have 2 groups of users with different levels of security access, so I need to restrict certain data in the interactive report. I want to create 1 report with all data and 1 report that excludes certain documents based on one of the fields. Can I do this using an authentication scheme? Can someone direct me to some good instructions on how to do this? I'm open to other suggestions as well.

  I have another thread on that as well, but I wonder about another method (limitation of access to the records in interactive report), hoping that it will be a little easier.

  Authentication schemes are used to establish the identity of a user. Common methods to include validating a username and password, call an external mechanism to the SSO or scan of a fingerprint. Authentication schemes are not related to your problem.

  Did you actually means 'permission' rather than 'authentication '? Authorisation schemes determine the actions by controlling access to pages and components of APEX, a user can run. You can use authorization to control if a user sees a report region, but not the lines that are shown in this report (although technically possible, it is generally not the best approach).

  In short: authentication determines the identity of the user. Authorization determines the operations that a user with this identity can perform. Restricted access control these operations can be performed on the data.

  What you need is an access control and DTV and view the methods described in the other thread are solutions to that. Close this message and focus on the other.

• Call the procedure to set the context before interactive report refreshes the data

  Hi guys,.

  I have a question mind an interactive report which takes the data in a view.

  The problem is that whenever I take the data from the database I need to define a context (user name and password) before running the query so the view will be taken into account the context and return only the lines that I have access.

  Everything works fine when I'm first loading of the page: I have first to define the context, then load all the data I need on the page, including the IR. But when I try to apply IR filters, or even don't go to the next page no data is returned. I believe this happens because the context is not defined before the execution of the query to load the data and I don't seem to find a way to put it.

  I tried to add a dynamic action on some events on IR (change, clicking, etc.) that executes the procedure to set the context, but without success - even if the event is raised, the report still doesn't return any data.

  Can someone help me with this issue please?

  Florin

  Use the attributes of application security Code PL/SQL of the initialization/cleanup of the database Session to do this: http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/bldr_attr.htm#HTMDB28929